summaryrefslogtreecommitdiff
path: root/drivers/extcon
AgeCommit message (Collapse)AuthorFilesLines
2021-12-24extcon: Deduplicate code in extcon_set_state_sync()Alexander Stein1-13/+1
Finding the cable index and checking for changed status is also done in extcon_set_state(). So calling extcon_set_state_sync() will do these checks twice. Remove them and use these checks from extcon_set_state(). Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-12-24extcon: usb-gpio: fix a non-kernel-doc commentRandy Dunlap1-1/+1
Do not use "/**" to begin a non-kernel-doc comment. Fixes this build warning: drivers/extcon/extcon-usb-gpio.c:23: warning: expecting prototype for drivers/extcon/extcon-usb-gpio.c(). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-27extcon: usbc-tusb320: Add support for TUSB320LYassine Oudjana1-3/+79
TUSB320L is a newer chip with additional features, and it has additional steps in its mode changing sequence: - Disable CC state machine, - Write to mode register, - Wait for 5 ms, - Re-enable CC state machine. It also has an additional register that a revision number can be read from. Add support for the mode changing sequence, and read the revision number during probe and print it as info. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-27extcon: usbc-tusb320: Add support for mode setting and resetYassine Oudjana1-4/+81
Reset the chip and set its mode to default (maintain mode set by PORT pin) during probe to make sure it comes up in the default state. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-27extcon: extcon-axp288: Use P-Unit semaphore lock for register accessesFabio Aiuto2-3/+30
use low level P-Unit semaphore lock for axp288 register accesses directly and for more than one access a time, to reduce the number of times this semaphore is locked and released which is an expensive operation. i2c-bus to the XPower is shared between the kernel and the SoCs P-Unit. The P-Unit has a semaphore wich the kernel must lock for axp288 register accesses. When the P-Unit semaphore is locked CPU and GPU power states cannot change or the system will freeze. The P-Unit semaphore lock is already managed inside the regmap access logic, but for each access the semaphore is locked and released. So use directly iosf_mbi_(un)block_punit_i2c_access(), we are safe in doing so because nested calls to the same semaphore are turned to nops. Suggested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-27extcon: max3355: Drop unused includeLinus Walleij1-1/+0
This driver includes the legacy <linux/gpio.h> header but does not use it. Drop this include. Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-27extcon: usb-gpio: Use the right includesLinus Walleij1-2/+1
The USB GPIO extcon driver does not use any of the legacy includes <linux/gpio.h> or <linux/of_gpio.h> but exploits the fact that this brings in <linux/mod_device_table.h>. Fix this up by using the right includes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-07-05Merge tag 'char-misc-5.14-rc1' of ↵Linus Torvalds5-48/+258
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char / misc and other driver subsystem updates for 5.14-rc1. Included in here are: - habanalabs driver updates - fsl-mc driver updates - comedi driver updates - fpga driver updates - extcon driver updates - interconnect driver updates - mei driver updates - nvmem driver updates - phy driver updates - pnp driver updates - soundwire driver updates - lots of other tiny driver updates for char and misc drivers This is looking more and more like the "various driver subsystems mushed together" tree... All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) mcb: Use DEFINE_RES_MEM() helper macro and fix the end address PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls bus: mhi: Wait for M2 state during system resume bus: mhi: core: Fix power down latency intel_th: Wait until port is in reset before programming it intel_th: msu: Make contiguous buffers uncached intel_th: Remove an unused exit point from intel_th_remove() stm class: Spelling fix nitro_enclaves: Set Bus Master for the NE PCI device misc: ibmasm: Modify matricies to matrices misc: vmw_vmci: return the correct errno code siox: Simplify error handling via dev_err_probe() fpga: machxo2-spi: Address warning about unused variable lkdtm/heap: Add init_on_alloc tests selftests/lkdtm: Enable various testable CONFIGs lkdtm: Add CONFIG hints in errors where possible lkdtm: Enable DOUBLE_FAULT on all architectures lkdtm/heap: Add vmalloc linear overflow test lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE ...
2021-06-21extcon: sm5502: Add support for SM5504Stephan Gerhold3-8/+204
SM5504 is another MUIC from Silicon Mitus that is fairly similar to SM5502. They seem to use the same register set, but: - SM5504 has some additional bits in SM5502_REG_CONTROL - SM5504 has a quite different set of interrupts - SM5504 reports USB OTG as dev_type1 = BIT(0) instead of BIT(7) Overall it's minor and we can support this by defining a separate struct sm5502_type for SM5504. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21extcon: sm5502: Refactor driver to use chip-specific structStephan Gerhold2-28/+44
Prepare for supporting SM5504 in the extcon-sm5502 driver by replacing enum sm5504_types with a struct sm5504_type that stores the chip-specific definitions. This struct can then be defined separately for SM5504 without having to add if (type == TYPE_SM5504) everywhere in the code. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21extcon: sm5502: Implement i2c_driver->probe_new()Stephan Gerhold1-3/+2
sm5022_muic_i2c_probe() does not use the i2c_device_id, so implement i2c_driver->probe_new() instead of probe(). Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21extcon: sm5502: Use devm_regmap_add_irq_chip()Stephan Gerhold1-12/+2
Use devm_regmap_add_irq_chip() to avoid having to remove the irqchip explicitly in sm5502_muic_i2c_remove(). Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21extcon: max8997: Add missing modalias stringMarek Szyprowski1-0/+1
The platform device driver name is "max8997-muic", so advertise it properly in the modalias string. This fixes automated module loading when this driver is compiled as a module. Fixes: b76668ba8a77 ("Extcon: add MAX8997 extcon driver") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21extcon: sm5502: Drop invalid register write in sm5502_reg_dataStephan Gerhold1-1/+0
When sm5502_init_dev_type() iterates over sm5502_reg_data to initialize the registers it is limited by ARRAY_SIZE(sm5502_reg_data). There is no need to add another empty element to sm5502_reg_data. Having the additional empty element in sm5502_reg_data will just result in writing 0xff to register 0x00, which does not really make sense. Fixes: 914b881f9452 ("extcon: sm5502: Add support new SM5502 extcon device driver") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21extcon: intel-mrfld: Sync hardware and software state on initFerry Toth1-0/+9
extcon driver for Basin Cove PMIC shadows the switch status used for dwc3 DRD to detect a change in the switch position. This change initializes the status at probe time. Cc: stable@vger.kernel.org Fixes: 492929c54791 ("extcon: mrfld: Introduce extcon driver for Basin Cove PMIC") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-17extcon: extcon-max8997: Simplify driver using devmMatti Vaittinen1-31/+16
Simplify driver by switching to use the resource managed IRQ requesting and resource managed work-queue initialization. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/61190cc280a63baeb05ec570282bb3677bee8e7b.1623146580.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-06-17extcon: extcon-max8997: Fix IRQ freeing at error pathMatti Vaittinen1-1/+1
If reading MAX8997_MUIC_REG_STATUS1 fails at probe the driver exits without freeing the requested IRQs. Free the IRQs prior returning if reading the status fails. Fixes: 3e34c8198960 ("extcon: max8997: Avoid forcing UART path on drive probe") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/27ee4a48ee775c3f8c9d90459c18b6f2b15edc76.1623146580.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-06-17extcon: extcon-max77693.c: Fix potential work-queue cancellation raceMatti Vaittinen1-12/+5
The extcon IRQ schedules a work item. IRQ is requested using devm while WQ is cancelld at remove(). This mixing of devm and manual unwinding has potential case where the WQ has been emptied (.remove() was ran) but devm unwinding of IRQ was not yet done. It may be possible the IRQ is triggered at this point scheduling new work item to the already flushed queue. According to the input documentation the input device allocated by devm_input_allocate_device() does not need to be explicitly unregistered. Use the new devm_work_autocancel() and remove the remove() to simplify the code. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/cbe8205eed8276f6e6db5003cfe51b8b0d4ac966.1623146580.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-06-17extcon: extcon-max14577: Fix potential work-queue cancellation raceMatti Vaittinen1-11/+5
The extcon IRQ schedules a work item. IRQ is requested using devm while WQ is cancelld at remove(). This mixing of devm and manual unwinding has potential case where the WQ has been emptied (.remove() was ran) but devm unwinding of IRQ was not yet done. It is possible the IRQ is triggered at this point scheduling new work item to the already flushed queue. Use new devm_work_autocancel() to remove the remove() and to kill the bug. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/ee8545f59ae3a93f0a70f640ecbd7e31cfadbcb9.1623146580.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-29Merge tag 'mfd-next-5.13' of ↵Linus Torvalds3-1825/+0
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - Add support for Software Nodes to MFD Core - Remove support for Device Properties from MFD Core - Use standard APIs in MFD Core New Drivers: - Add support for ROHM BD9576MUF and BD9573MUF PMICs - Add support for Netronix Embedded Controller, PWM and RTC - Add support for Actions Semi ATC260x PMICs and OnKey New Device Support: - Add support for DG1 PCIe Graphics Card to Intel PMT - Add support for ROHM BD71815 PMIC to ROHM BD71828 - Add support for Tolino Shine 2 HD to Netronix Embedded Controller - Add support for AX10 BMC Secure Updates to Intel M10 BMC Removed Device Support: - Remove Arizona Extcon support from MFD - Remove ST-E AB8500 Power Supply code from MFD - Remove AB3100 altogether New Functionality: - Add support for SMBus and I2C modes to Dialog DA9063 - Switch to using Software Nodes in Intel (various) New/converted Device Tree bindings: - rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions atc260x, ricoh rn5t618, qcom pm8xxx - Fix-ups: - Fix error handling/path; intel_pmt - Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc - Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997 - Use correct data-type; db8500-prcmu - Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl - Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio - Regmap related fix-ups; intel-m10-bmc, sec-core - Reorder resource freeing during remove; intel_quark_i2c_gpio - Make table indexing more robust; intel_quark_i2c_gpio - Fix reference imbalances; arizona-irq - Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930, intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio Bug Fixes: - Fix incorrect (register) values; intel-m10-bmc - Kconfig related fixes; ABX500_CORE - Do not clear the Auto Reload Register; stm32-timers" * tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits) mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell" mfd: twl: Remove unused inline function twl4030charger_usb_en() dt-bindings: mfd: Convert pm8xxx bindings to yaml dt-bindings: mfd: Add compatible for pmk8350 rtc i2c: designware: Get rid of legacy platform data mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000" mfd: arizona: Fix rumtime PM imbalance on error mfd: max8997: Replace 8998 with 8997 mfd: core: Use acpi_find_child_device() for child devices lookup mfd: intel_quark_i2c_gpio: Don't play dirty trick with const mfd: intel_quark_i2c_gpio: Enable MSI interrupt mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing mfd: ntxec: Support for EC in Tolino Shine 2 HD mfd: stm32-timers: Avoid clearing auto reload register mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions mfd: intel_quark_i2c_gpio: Remove unused struct device member mfd: intel_quark_i2c_gpio: Unregister resources in reversed order mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500 ...
2021-04-26Merge tag 'driver-core-5.13-rc1' of ↵Linus Torvalds4-45/+20
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core changes for 5.13-rc1. Nothing major, just lots of little core changes and cleanups, notable things are: - finally set 'fw_devlink=on' by default. All reported issues with this have been shaken out over the past 9 months or so, but we will be paying attention to any fallout here in case we need to revert this as the default boot value (symptoms of problems are a simple lack of booting) - fixes found to be needed by fw_devlink=on value in some subsystems (like clock). - delayed work initialization cleanup - driver core cleanups and minor updates - software node cleanups and tweaks - devtmpfs cleanups - minor debugfs cleanups All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (53 commits) devm-helpers: Fix devm_delayed_work_autocancel() kerneldoc PM / wakeup: use dev_set_name() directly software node: Allow node addition to already existing device kunit: software node: adhear to KUNIT formatting standard node: fix device cleanups in error handling code kobject_uevent: remove warning in init_uevent_argv() debugfs: Make debugfs_allow RO after init Revert "driver core: platform: Make platform_get_irq_optional() optional" media: ipu3-cio2: Switch to use SOFTWARE_NODE_REFERENCE() software node: Introduce SOFTWARE_NODE_REFERENCE() helper macro software node: Imply kobj_to_swnode() to be no-op software node: Deduplicate code in fwnode_create_software_node() software node: Introduce software_node_alloc()/software_node_free() software node: Free resources explicitly when swnode_register() fails debugfs: drop pointless nul-termination in debugfs_read_file_bool() driver core: add helper for deferred probe reason setting driver core: Improve fw_devlink & deferred_probe_timeout interaction of: property: fw_devlink: Add support for remote-endpoint driver core: platform: Make platform_get_irq_optional() optional driver core: Replace printf() specifier and drop unneeded casting ...
2021-04-08extcon: qcom-spmi: Add support for VBUS detectionAnirudh Ghayal1-19/+80
VBUS can be detected via a dedicated PMIC pin. Add support for reporting the VBUS status. Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Kavya Nunna <knunna@codeaurora.org> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08extcon: sm5502: Detect OTG when USB_ID is connected to groundNikita Travkin1-2/+20
In it's curent state this driver ignores OTG adapters with ID pin connected to ground. This commit adds a check to set extcon into host mode when such OTG adapter is connected. Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08extcon: max8997: Add CHGINS and CHGRM interrupt handlingTimon Baetz1-0/+4
This allows the MAX8997 charger to set the current limit depending on the detected extcon charger type. Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-05Merge 5.12-rc6 into driver-core-nextGreg Kroah-Hartman1-0/+1
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23extconn: Clean-up few drivers by using managed work initMatti Vaittinen4-45/+20
Few drivers implement remove call-back only for ensuring a delayed work gets cancelled prior driver removal. Clean-up these by switching to use devm_delayed_work_autocancel() instead. Additionally, this helps avoiding mixing devm and manual resource management and cleans up a (theoretical?) bug from extconn-palmas.c and extcon-qcom-spmi-misc.c where (devm managed)IRQ might schedule new work item after wq was cleaned at remove(). This change is compile-tested only. All testing is appreciated. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/b1030eddbf0069f2d39e951be1d8e40d6413aeeb.1616506559.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-18ASoC/extcon: arizona: Move arizona jack code to sound/soc/codecs/arizona-jack.cHans de Goede3-1828/+0
The jack handling for arizona codecs is being refactored so that it is done directly by the codec drivers, instead of having an extcon-driver bind to a separate "arizona-extcon" child-device for this. drivers/mfd/arizona-core.c has already been updated to no longer instantiate an "arizona-extcon" child-device for the arizona codecs. This means that the "arizona-extcon" driver is no longer useful (there are no longer any devices for it to bind to). This commit drops the extcon Kconfig / Makefile bits and moves drivers/extcon/extcon-arizona.c to sound/soc/codecs/arizona-jack.c . This is a preparation patch for converting the arizona extcon-driver into a helper library for letting the arizona codec-drivers directly report jack state through the standard sound/soc/soc-jack.c functions. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-18extcon: arizona: Always use pm_runtime_get_sync() when we need the device to ↵Hans de Goede1-2/+2
be awake Before this commit the extcon-arizona code was mixing pm_runtime_get() and pm_runtime_get_sync() in different places. In all places where pm_runtime_get[_sync]() is called, the code makes use of the device immediately after the call. This means that we should always use pm_runtime_get_sync(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-18extcon: arizona: Fix flags parameter to the gpiod_get("wlf,micd-pol") callHans de Goede1-1/+1
The initial value of the GPIO should match the info->micd_modes[0].gpio value. arizona_extcon_probe() already stores the necessary flag in a mode variable, but instead of passing mode as flags to the gpiod_get() it was using a hardcoded GPIOD_OUT_LOW. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-18extcon: arizona: Fix various races on driver unbindHans de Goede1-19/+21
We must free/disable all interrupts and cancel all pending works before doing further cleanup. Before this commit arizona_extcon_remove() was doing several register writes to shut things down before disabling the IRQs and it was cancelling only 1 of the 3 different works used. Move all the register-writes shutting things down to after the disabling of the IRQs and add the 2 missing cancel_delayed_work_sync() calls. This fixes various possible races on driver unbind. One of which would always trigger on devices using the mic-clamp feature for jack detection. The ARIZONA_MICD_CLAMP_MODE_MASK update was done before disabling the IRQs, causing: 1. arizona_jackdet() to run 2. detect a jack being inserted (clamp disabled means jack inserted) 3. call arizona_start_mic() which: 3.1 Enables the MICVDD regulator 3.2 takes a pm_runtime_reference And this was all happening after the ARIZONA_MICD_ENA bit clearing, which would undo 3.1 and 3.2 because the ARIZONA_MICD_CLAMP_MODE_MASK update was being done after the ARIZONA_MICD_ENA bit clearing. So this means that arizona_extcon_remove() would exit with 1. MICVDD enabled and 2. The pm_runtime_reference being unbalanced. MICVDD still being enabled caused the following oops when the regulator is released by the devm framework: [ 2850.745757] ------------[ cut here ]------------ [ 2850.745827] WARNING: CPU: 2 PID: 2098 at drivers/regulator/core.c:2123 _regulator_put.part.0+0x19f/0x1b0 [ 2850.745835] Modules linked in: extcon_arizona ... ... [ 2850.746909] Call Trace: [ 2850.746932] regulator_put+0x2d/0x40 [ 2850.746946] release_nodes+0x22a/0x260 [ 2850.746984] __device_release_driver+0x190/0x240 [ 2850.747002] driver_detach+0xd4/0x120 ... [ 2850.747337] ---[ end trace f455dfd7abd9781f ]--- Note this oops is just one of various theoretically possible races caused by the wrong ordering inside arizona_extcon_remove(), this fixes the ordering fixing all possible races, including the reported oops. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-18extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has ↵Hans de Goede1-8/+9
been unplugged When the jack is partially inserted and then removed again it may be removed while the hpdet code is running. In this case the following may happen: 1. The "JACKDET rise" or ""JACKDET fall" IRQ triggers 2. arizona_jackdet runs and takes info->lock 3. The "HPDET" IRQ triggers 4. arizona_hpdet_irq runs, blocks on info->lock 5. arizona_jackdet calls arizona_stop_mic() and clears info->hpdet_done 6. arizona_jackdet releases info->lock 7. arizona_hpdet_irq now can continue running and: 7.1 Calls arizona_start_mic() (if a mic was detected) 7.2 sets info->hpdet_done Step 7 is undesirable / a bug: 7.1 causes the device to stay in a high power-state (with MICVDD enabled) 7.2 causes hpdet to not run on the next jack insertion, which in turn causes the EXTCON_JACK_HEADPHONE state to never get set This fixes both issues by skipping these 2 steps when arizona_hpdet_irq runs after the jack has been unplugged. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-15extcon: Fix error handling in extcon_dev_registerDinghao Liu1-0/+1
When devm_kcalloc() fails, we should execute device_unregister() to unregister edev->dev from system. Fixes: 046050f6e623e ("extcon: Update the prototype of extcon_register_notifier() with enum extcon") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-12-11extcon: max77693: Fix modalias stringMarek Szyprowski1-1/+1
The platform device driver name is "max77693-muic", so advertise it properly in the modalias string. This fixes automated module loading when this driver is compiled as a module. Fixes: db1b9037424b ("extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-12-11extcon: fsa9480: Support TI TSU6111 variantLinus Walleij1-0/+1
The Texas Instruments TSU6111 is compatible to the FSA880/FSA9480. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-12-11extcon: Add driver for TI TUSB320Michael Auchter3-0/+193
This patch adds an extcon driver for the TI TUSB320 USB Type-C device. This can be used to detect whether the port is configured as a downstream or upstream facing port. Signed-off-by: Michael Auchter <michael.auchter@ni.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-29extcon: axp288: Use module_platform_driver to simplify the codeLiu Shixin1-12/+1
module_platform_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-29extcon: ptn5150: Do not print error during probe if nothing is attachedKrzysztof Kozlowski1-1/+0
The commit 85256f611f66 ("extcon: ptn5150: Check current USB mode when probing") reused code for checking CC status register in the probe path to determine what is initially connected. However if nothing is connected, the CC status register will have 0x0 value and print an error message: ptn5150 1-003d: Unknown Port status : 0 This is not an error. Also any other unknown port status values are not really errors but unhandled cases. Fixes: 85256f611f66 ("extcon: ptn5150: Check current USB mode when probing") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: ptn5150: Use defines for registersKrzysztof Kozlowski1-12/+10
The register addresses are not continuous, so use simple defines for them. This also makes it easier to find the address for register. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: palmas: Simplify with dev_err_probe()Krzysztof Kozlowski1-12/+6
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: max8997: Return error code of extcon_dev_allocate()Krzysztof Kozlowski1-1/+1
devm_extcon_dev_allocate() can fail of multiple reasons. The call returns proper error code on failure so pass it instead of fixed ENOMEM. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: max77843: Return error code of extcon_dev_allocate()Krzysztof Kozlowski1-1/+1
devm_extcon_dev_allocate() can fail of multiple reasons. The call returns proper error code on failure so pass it instead of fixed ENOMEM. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: max77693: Return error code of extcon_dev_allocate()Krzysztof Kozlowski1-1/+1
devm_extcon_dev_allocate() can fail of multiple reasons. The call returns proper error code on failure so pass it instead of fixed ENOMEM. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: max14577: Return error code of extcon_dev_allocate()Krzysztof Kozlowski1-1/+1
devm_extcon_dev_allocate() can fail of multiple reasons. The call returns proper error code on failure so pass it instead of fixed ENOMEM. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: ptn5150: Set the VBUS and POLARITY property capabilityRamuthevar Vadivel Murugan1-0/+7
Set the capability value of property for VBUS and POLARITY. Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> [cw00.choi: Replace the space with tab for the indentation] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: ptn5150: Switch to GENMASK() and BIT() macrosRamuthevar Vadivel Murugan1-32/+11
Switch to GENMASK() and BIT() macros. Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: ptn5150: Deduplicate parts of dev_err_probe()Andy Shevchenko1-9/+5
dev_err_probe() is designed to be used like return dev_err_probe(dev, ret, "Error message\n"); Hence no need to have a separate return statement. Besides that dev_err_probe() prints already returned error code, no need to repeat that either. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: Replace HTTP links with HTTPS onesAlexander A. Klimov2-2/+2
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: ptn5150: Convert to .probe_newKrzysztof Kozlowski1-3/+2
The 'struct i2c_device_id' argument of probe function is not used, so convert the driver to simpler 'probe_new' interface. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: ptn5150: Convert to module_i2c_driverKrzysztof Kozlowski1-6/+1
Use module_i2c_driver() to simplify driver init boilerplate. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: ptn5150: Reduce the amount of logs on deferred probeKrzysztof Kozlowski1-5/+6
There is no point to print deferred probe (and its failures to get resources) as an error. In case of multiple probe tries this would pollute the dmesg. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>