Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit 2d698e8b4fd22374dac0a2d5150ab24d57a222ab ]
An FF-A ABI could support both the SMC32 and SMC64 conventions.
A callee that runs in the AArch64 execution state and implements such
an ABI must implement both SMC32 and SMC64 conventions of the ABI.
So the FF-A drivers will need the option to choose the mode irrespective
of FF-A version and the partition execution mode flag in the partition
information.
Let us remove the check on the FF-A version for allowing the selection
of 32bit mode of messaging. The driver will continue to set the 32-bit
mode if the partition execution mode flag specified that the partition
supports only 32-bit execution.
Fixes: 106b11b1ccd5 ("firmware: arm_ffa: Set up 32bit execution mode flag using partiion property")
Link: https://lore.kernel.org/r/20231005142823.278121-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d0bc6360f17ea323ab25939a34857123d7d87e5 ]
Commit 19b8766459c4 ("firmware: arm_ffa: Fix FFA device names for logical
partitions") added an ID to the FFA device using ida_alloc() and append
the same to "arm-ffa" to make up a unique device name. However it missed
to stash the id value in ffa_dev to help freeing the ID later when the
device is destroyed.
Due to the missing/unassigned ID in FFA device, we get the following
warning when the FF-A device is unregistered.
| ida_free called for id=0 which is not allocated.
| WARNING: CPU: 7 PID: 1 at lib/idr.c:525 ida_free+0x114/0x164
| CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc4 #209
| pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : ida_free+0x114/0x164
| lr : ida_free+0x114/0x164
| Call trace:
| ida_free+0x114/0x164
| ffa_release_device+0x24/0x3c
| device_release+0x34/0x8c
| kobject_put+0x94/0xf8
| put_device+0x18/0x24
| klist_devices_put+0x14/0x20
| klist_next+0xc8/0x114
| bus_for_each_dev+0xd8/0x144
| arm_ffa_bus_exit+0x30/0x54
| ffa_init+0x68/0x330
| do_one_initcall+0xdc/0x250
| do_initcall_level+0x8c/0xac
| do_initcalls+0x54/0x94
| do_basic_setup+0x1c/0x28
| kernel_init_freeable+0x104/0x170
| kernel_init+0x20/0x1a0
| ret_from_fork+0x10/0x20
Fix the same by actually assigning the ID in the FFA device this time
for real.
Fixes: 19b8766459c4 ("firmware: arm_ffa: Fix FFA device names for logical partitions")
Link: https://lore.kernel.org/r/20231003085932.3553985-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
As per the FF-A specification: section "Usage of other memory region
attributes", in a transaction to donate memory or lend memory to a single
borrower, if the receiver is a PE or Proxy endpoint, the owner must not
specify the attributes and the relayer will return INVALID_PARAMETERS
if the attributes are set.
Let us not set the memory region attributes for MEM_LEND.
Fixes: 82a8daaecfd9 ("firmware: arm_ffa: Add support for MEM_LEND")
Reported-by: Joao Alves <joao.alves@arm.com>
Reported-by: Olivier Deprez <olivier.deprez@arm.com>
Link: https://lore.kernel.org/r/20230919-ffa_v1-1_notif-v2-13-6f3a3ca3923c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
As described in the commit 111a833dc5cb ("firmware: arm_ffa: Set
reserved/MBZ fields to zero in the memory descriptors") some fields in
the memory descriptor have to be zeroed explicitly. The handle field is
one of these, but it was left out from that change, fix this now.
Fixes: 111a833dc5cb ("firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors")
Reported-by: Imre Kis <imre.kis@arm.com>
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Link: https://lore.kernel.org/r/20230601140749.93812-1-balint.dobszay@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The transmit buffers allocated by the driver can be used to transmit data
by any messages/commands needing the buffer. However, it is not guaranteed
to have been zero-ed before every new transmission and hence it will just
contain residual value from the previous transmission. There are several
reserved fields in the memory descriptors that must be zero(MBZ). The
receiver can reject the transmission if any such MBZ fields are non-zero.
While we can set the whole page to zero, it is not optimal as most of the
fields get initialised to the value required for the current transmission.
So, just set the reserved/MBZ fields to zero in the memory descriptors
explicitly to honour the requirement and keep the receiver happy.
Fixes: cc2195fe536c ("firmware: arm_ffa: Add support for MEM_* interfaces")
Reported-by: Marc Bonnici <marc.bonnici@arm.com>
Link: https://lore.kernel.org/r/20230503131252.12585-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Each physical partition can provide multiple services each with UUID.
Each such service can be presented as logical partition with a unique
combination of VM ID and UUID. The number of distinct UUID in a system
will be less than or equal to the number of logical partitions.
However, currently it fails to register more than one logical partition
or service within a physical partition as the device name contains only
VM ID while both VM ID and UUID are maintained in the partition information.
The kernel complains with the below message:
| sysfs: cannot create duplicate filename '/devices/arm-ffa-8001'
| CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7 #8
| Hardware name: FVP Base RevC (DT)
| Call trace:
| dump_backtrace+0xf8/0x118
| show_stack+0x18/0x24
| dump_stack_lvl+0x50/0x68
| dump_stack+0x18/0x24
| sysfs_create_dir_ns+0xe0/0x13c
| kobject_add_internal+0x220/0x3d4
| kobject_add+0x94/0x100
| device_add+0x144/0x5d8
| device_register+0x20/0x30
| ffa_device_register+0x88/0xd8
| ffa_setup_partitions+0x108/0x1b8
| ffa_init+0x2ec/0x3a4
| do_one_initcall+0xcc/0x240
| do_initcall_level+0x8c/0xac
| do_initcalls+0x54/0x94
| do_basic_setup+0x1c/0x28
| kernel_init_freeable+0x100/0x16c
| kernel_init+0x20/0x1a0
| ret_from_fork+0x10/0x20
| kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to
| register things with the same name in the same directory.
| arm_ffa arm-ffa: unable to register device arm-ffa-8001 err=-17
| ARM FF-A: ffa_setup_partitions: failed to register partition ID 0x8001
By virtue of being random enough to avoid collisions when generated in a
distributed system, there is no way to compress UUID keys to the number
of bits required to identify each. We can eliminate '-' in the name but
it is not worth eliminating 4 bytes and add unnecessary logic for doing
that. Also v1.0 doesn't provide the UUID of the partitions which makes
it hard to use the same for the device name.
So to keep it simple, let us alloc an ID using ida_alloc() and append the
same to "arm-ffa" to make up a unique device name. Also stash the id value
in ffa_dev to help freeing the ID later when the device is destroyed.
Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Reported-by: Lucian Paul-Trifu <lucian.paul-trifu@arm.com>
Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-3-d9108e43a176@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Commit bb1be7498500 ("firmware: arm_ffa: Add v1.1 get_partition_info support")
adds support to discovery the UUIDs of the partitions or just fetch the
partition count using the PARTITION_INFO_GET_RETURN_COUNT_ONLY flag.
However the commit doesn't handle the fact that the older version doesn't
understand the flag and must be MBZ which results in firmware returning
invalid parameter error. That results in the failure of the driver probe
which is in correct.
Limit the usage of the PARTITION_INFO_GET_RETURN_COUNT_ONLY flag for the
versions above v1.0(i.e v1.1 and onwards) which fixes the issue.
Fixes: bb1be7498500 ("firmware: arm_ffa: Add v1.1 get_partition_info support")
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Reported-by: Marc Bonnici <marc.bonnici@arm.com>
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-2-d9108e43a176@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Currently ffa_drv->remove() is called unconditionally from
ffa_device_remove(). Since the driver registration doesn't check for it
and allows it to be registered without .remove callback, we need to check
for the presence of it before executing it from ffa_device_remove() to
above a NULL pointer dereference like the one below:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
| ESR = 0x0000000086000004
| EC = 0x21: IABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000
| [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP
| CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6
| Hardware name: FVP Base RevC (DT)
| pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c)
| pc : 0x0
| lr : ffa_device_remove+0x20/0x2c
| Call trace:
| 0x0
| device_release_driver_internal+0x16c/0x260
| driver_detach+0x90/0xd0
| bus_remove_driver+0xdc/0x11c
| driver_unregister+0x30/0x54
| ffa_driver_unregister+0x14/0x20
| cleanup_module+0x18/0xeec
| __arm64_sys_delete_module+0x234/0x378
| invoke_syscall+0x40/0x108
| el0_svc_common+0xb4/0xf0
| do_el0_svc+0x30/0xa4
| el0_svc+0x2c/0x7c
| el0t_64_sync_handler+0x84/0xf0
| el0t_64_sync+0x190/0x194
Fixes: 244f5d597e1e ("firmware: arm_ffa: Add missing remove callback to ffa_bus_type")
Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-1-d9108e43a176@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
FF-A function IDs and error codes will be needed in the hypervisor too,
so move to them to the header file where they can be shared. Rename the
version constants with an "FFA_" prefix so that they are less likely
to clash with other code in the tree.
Co-developed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221116170335.2341003-2-qperret@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In preparation to make memory operations accessible for a non
ffa_driver/device, it is better to split the ffa_ops into different
categories of operations: info, message and memory. The info and memory
are ffa_device independent and can be used without any associated
ffa_device from a non ffa_driver.
However, we don't export these info and memory APIs yet without the user.
The first users of these APIs can export them.
Link: https://lore.kernel.org/r/20220907145240.1683088-11-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
FF-A v1.1 adds a flag in the partition properties to indicate if the
partition runs in the AArch32 or AArch64 execution state. Use the same
to set-up the 32-bit execution flag mode in the ffa_dev automatically
if the detected firmware version is above v1.0 and ignore any requests
to do the same from the ffa_driver.
Link: https://lore.kernel.org/r/20220907145240.1683088-10-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
FF-A v1.1 adds support to discovery the UUIDs of the partitions that was
missing in v1.0 and which the driver workarounds by using UUIDs supplied
by the ffa_drivers.
Add the v1.1 get_partition_info support and disable the workaround if
the detected FF-A version is greater than v1.0.
Link: https://lore.kernel.org/r/20220907145240.1683088-9-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Except the message APIs, all other APIs are ffa_device independent and can
be used without any associated ffa_device from a non ffa_driver.
In order to reflect the same, just rename ffa_dev_ops as ffa_ops to
avoid any confusion or to keep it simple.
Link: https://lore.kernel.org/r/20220907145240.1683088-8-sudeep.holla@arm.com
Suggested-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
There is a requirement to make memory APIs independent of the ffa_device.
One of the use-case is to have a common memory driver that manages the
memory for all the ffa_devices. That common memory driver won't be a
ffa_driver or won't have any ffa_device associated with it. So having
these memory APIs accessible without a ffa_device is needed and should
be possible as most of these are handled by the partition manager(SPM
or hypervisor).
Drop the ffa_device argument to the memory APIs and make them ffa_device
independent.
Link: https://lore.kernel.org/r/20220907145240.1683088-7-sudeep.holla@arm.com
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Currently, the ffa_dev->mode_32bit is use to detect if the native 64-bit
or 32-bit versions of FF-A ABI needs to be used. However for the FF-A
memory ABIs, it is not dependent on the ffa_device(i.e. the partition)
itself, but the partition manager(SPM).
So, the FFA_FEATURES can be use to detect if the native 64bit ABIs are
supported or not and appropriate calls can be made based on that.
Use FFA_FEATURES to detect if native versions of MEM_LEND or MEM_SHARE
are implemented and make of the same to use native memory ABIs later on.
Link: https://lore.kernel.org/r/20220907145240.1683088-6-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add support for FFA_FEATURES to discover properties supported at the
FF-A interface. This interface can be used to query:
- If an FF-A interface is implemented by the component at the higher EL,
- If an implemented FF-A interface also implements any optional features
described in its interface definition, and
- Any implementation details exported by an implemented FF-A interface
as described in its interface definition.
Link: https://lore.kernel.org/r/20220907145240.1683088-5-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The only user of this exported ffa_dev_ops_get() was OPTEE driver which
now uses ffa_dev->ops directly, there are no other users for this.
Also, since any ffa driver can use ffa_dev->ops directly, there will be
no need for ffa_dev_ops_get(), so just remove ffa_dev_ops_get().
Link: https://lore.kernel.org/r/20220907145240.1683088-4-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Currently ffa_dev_ops_get() is the way to fetch the ffa_dev_ops pointer.
It checks if the ffa_dev structure pointer is valid before returning the
ffa_dev_ops pointer.
Instead, the pointer can be made part of the ffa_dev structure and since
the core driver is incharge of creating ffa_device for each identified
partition, there is no need to check for the validity explicitly if the
pointer is embedded in the structure.
Add the pointer to the ffa_dev_ops in the ffa_dev structure itself and
initialise the same as part of creation of the device.
Link: https://lore.kernel.org/r/20220907145240.1683088-2-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The ffa core driver currently assigns its own driver information
to individual ffa device driver_data which is wrong. Firstly, it leaks
this core driver information to individual ffa_device and hence to
ffa_driver. Secondly the ffa_device driver_data is for use by individual
ffa_driver and not for this core driver managing all those devices.
Link: https://lore.kernel.org/r/20220429113946.2087145-2-sudeep.holla@arm.com
Fixes: d0c0bce83122 ("firmware: arm_ffa: Setup in-kernel users of FFA partitions")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
While we pass uuid_null intentionally to ffa_partition_probe in
ffa_setup_partitions to get the count of the partitions, it must not be
uuid_null in ffa_partition_info_get which is used by the ffa_drivers
to fetch the specific partition info passing the UUID of the partition.
Fix ffa_partition_info_get by passing the received uuid down to
ffa_partition_probe so that the correct partition information is fetched.
Link: https://lore.kernel.org/r/20220429113946.2087145-1-sudeep.holla@arm.com
Fixes: d0c0bce83122 ("firmware: arm_ffa: Setup in-kernel users of FFA partitions")
Reported-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Fix the handling of MEM_FRAG_TX/RX SMCs when the full memory descriptor
does not fit in a single innovation of a memory sharing request.
The current implementation expects a FFA_MEM_SHARE/FFA_MEM_LEND
call to always receive a FFA_SUCCESS response, however in the
case where a full descriptor does not fit inside the partitions
TX buffer, the call can instead complete with a FFA_MEM_FRAG_RX SMC
to request the next part of the descriptor to be transmitted.
Similarly a FFA_MEM_FRAG_TX call currently only expects
FFA_MEM_FRAG_RX as a response, however once the full descriptor
has been transmitted the FFA_SUCCESS ABI will be used to indicate
successful transmission.
Update the existing code to match the expected behaviour.
Link: https://lore.kernel.org/r/20220426121219.1801601-1-marc.bonnici@arm.com
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The newly added ffa_compatible_version_find() function causes a
build warning because of a variable that is never used:
drivers/firmware/arm_ffa/driver.c:180:6: error: unused variable 'compat_version' [-Werror,-Wunused-variable]
u32 compat_version;
Link: https://lore.kernel.org/r/20211026083400.3444946-1-arnd@kernel.org
Fixes: 8e3f9da608f1 ("firmware: arm_ffa: Handle compatibility with different firmware versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
As part of the FF-A spec, an endpoint is allowed to transfer access of,
or lend, a memory region to one or more borrowers.
Extend the existing memory sharing implementation to support
FF-A MEM_LEND functionality and expose this to other kernel drivers.
Note that upon a successful MEM_LEND request the caller must ensure that
the memory region specified is not accessed until a successful
MEM_RECALIM call has been made. On systems with a hypervisor present
this will been enforced, however on systems without a hypervisor the
responsibility falls to the calling kernel driver to prevent access.
Link: https://lore.kernel.org/r/20211015165742.2513065-1-marc.bonnici@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The driver currently just support v1.0 of Arm FFA specification. It also
expects the firmware implementation to match the same and bail out if it
doesn't match. This is causing issue when running with higher version of
firmware implementation(e.g. v1.1 which will released soon).
In order to support compatibility with different firmware versions, let
us add additional checks and find the compatible version the driver can
work with.
Link: https://lore.kernel.org/r/20211013091127.990992-1-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
When arm_ffa firmware driver module is unloaded or removed we call
__ffa_devices_unregister on all the devices on the ffa bus. It must
unregister all the devices instead it is currently just releasing the
devices without unregistering. That is pure wrong as when we try to
load the module back again, it will result in the kernel crash something
like below.
-->8
CPU: 2 PID: 232 Comm: modprobe Not tainted 5.15.0-rc2+ #169
Hardware name: FVP Base RevC (DT)
Call trace:
dump_backtrace+0x0/0x1cc
show_stack+0x18/0x64
dump_stack_lvl+0x64/0x7c
dump_stack+0x18/0x38
sysfs_create_dir_ns+0xe4/0x140
kobject_add_internal+0x170/0x358
kobject_add+0x94/0x100
device_add+0x178/0x5f0
device_register+0x20/0x30
ffa_device_register+0x80/0xcc [ffa_module]
ffa_setup_partitions+0x7c/0x108 [ffa_module]
init_module+0x290/0x2dc [ffa_module]
do_one_initcall+0xbc/0x230
do_init_module+0x58/0x304
load_module+0x15e0/0x1f68
__arm64_sys_finit_module+0xb8/0xf4
invoke_syscall+0x44/0x140
el0_svc_common+0xb4/0xf0
do_el0_svc+0x24/0x80
el0_svc+0x20/0x50
el0t_64_sync_handler+0x84/0xe4
el0t_64_sync+0x1a0/0x1a4
kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to
register things with the same name in the same directory.
----
Fix the issue by calling device_unregister in __ffa_devices_unregister
which will also take care of calling device_release(which is mapped to
ffa_release_device)
Link: https://lore.kernel.org/r/20210924092859.3057562-2-sudeep.holla@arm.com
Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Currently the arm_ffa firmware driver can be built as module and hence
all the users of FFA driver. If any driver on the ffa bus is removed or
unregistered, the remove callback on all the device bound to the driver
being removed should be callback. For that to happen, we must register
a remove callback on the ffa_bus which is currently missing. This results
in the probe getting called again without the previous remove callback
on a device which may result in kernel crash.
Fix the issue by registering the remove callback on the FFA bus.
Link: https://lore.kernel.org/r/20210924092859.3057562-1-sudeep.holla@arm.com
Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The ffa_linux_errmap buffer access index is supposed to range from 0-8
but it ranges from 1-9 instead. It reads one element out of bounds. It
also changes the success into -EINVAL though ffa_to_linux_errno is never
used in case of success, it is expected to work for success case too.
It is slightly confusing code as the negative of the error code
is used as index to the buffer. Fix it by negating it at the start and
make it more readable.
Link: https://lore.kernel.org/r/20210707134739.1869481-1-sudeep.holla@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
clang produces the following warning:
drivers/firmware/arm_ffa/driver.c:123: warning: expecting
prototype for FF(). Prototype was for FFA_PAGE_SIZE() instead
This comment starts with '/**', but isn't a kernel-doc comment.
Refer Documentation/doc-guide/kernel-doc.rst
Fix the same by removing the kernel-doc style comment here.
Link: https://lore.kernel.org/r/20210622162202.3485866-1-sudeep.holla@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
When the driver core calls the probe callback it already checked that
the devices match, so there is no need to call the match callback again.
Link: https://lore.kernel.org/r/20210621201652.127611-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The bus probe callback calls the driver callback without further
checking. Better be safe than sorry and refuse registration of a driver
without a probe function to prevent a NULL pointer exception.
Link: https://lore.kernel.org/r/20210621201652.127611-1-u.kleine-koenig@pengutronix.de
Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Most of the MEM_* APIs share the same parameters, so they can be
generalised. Currently only MEM_SHARE is implemented and the user space
interface for that is not added yet.
Link: https://lore.kernel.org/r/20210521151033.181846-6-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Parse the FFA nodes from the device-tree and register all the partitions
whose services will be used in the kernel.
In order to also enable in-kernel users of FFA interface, let us add
simple set of operations for such devices.
The in-kernel users are registered without the character device interface.
Link: https://lore.kernel.org/r/20210521151033.181846-5-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
There are requests to keep the transport separate in order to allow
other possible transports like virtio. So let us keep the SMCCC transport
specific routines abstracted.
It is kept simple for now. Once we add another transport, we can develop
better abstraction.
Link: https://lore.kernel.org/r/20210521151033.181846-4-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
This just add a basic driver that sets up the transport(e.g. SMCCC),
checks the FFA version implemented, get the partition ID for self and
sets up the Tx/Rx buffers for communication.
Link: https://lore.kernel.org/r/20210521151033.181846-3-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The Arm FF for Armv8-A specification has concept of endpoints or
partitions. In the Normal world, a partition could be a VM when
the Virtualization extension is enabled or the kernel itself.
In order to handle multiple partitions, we can create a FFA device for
each such partition on a dedicated FFA bus. Similarly, different drivers
requiring FFA transport can be registered on the same bus. We can match
the device and drivers using UUID. This is mostly for the in-kernel
users with FFA drivers.
Link: https://lore.kernel.org/r/20210521151033.181846-2-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|