| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Ampere Altra machines are reported to misbehave when the SetTime() EFI
runtime service is called after ExitBootServices() but before calling
SetVirtualAddressMap(). Given that the latter is horrid, pointless and
explicitly documented as optional by the EFI spec, we no longer invoke
it at boot if the configured size of the VA space guarantees that the
EFI runtime memory regions can remain mapped 1:1 like they are at boot
time.
On Ampere Altra machines, this results in SetTime() calls issued by the
rtc-efi driver triggering synchronous exceptions during boot. We can
now recover from those without bringing down the system entirely, due to
commit 23715a26c8d81291 ("arm64: efi: Recover from synchronous
exceptions occurring in firmware"). However, it would be better to avoid
the issue entirely, given that the firmware appears to remain in a funny
state after this.
So attempt to identify these machines based on the 'family' field in the
type #1 SMBIOS record, and call SetVirtualAddressMap() unconditionally
in that case.
Tested-by: Alexandru Elisei <alexandru.elisei@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The EFI TCG spec, in §10.2.6 "Measuring UEFI Variables and UEFI GPT
Data", only reasons about the load options passed to a loaded image in
the context of boot options booted directly from the BDS, which are
measured into PCR #5 along with the rest of the Boot#### EFI variable.
However, the UEFI spec mentions the following in the documentation of
the LoadImage() boot service and the EFI_LOADED_IMAGE protocol:
The caller may fill in the image’s "load options" data, or add
additional protocol support to the handle before passing control to
the newly loaded image by calling EFI_BOOT_SERVICES.StartImage().
The typical boot sequence for Linux EFI systems is to load GRUB via a
boot option from the BDS, which [hopefully] calls LoadImage to load the
kernel image, passing the kernel command line via the mechanism
described above. This means that we cannot rely on the firmware
implementing TCG measured boot to ensure that the kernel command line
gets measured before the image is started, so the EFI stub will have to
take care of this itself.
Given that PCR #5 has an official use in the TCG measured boot spec,
let's avoid it in this case. Instead, add a measurement in PCR #9 (which
we already use for our initrd) and extend it with the LoadOptions
measurements
Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Second shared stable tag between EFI and LoongArch trees
This is necessary because the EFI libstub refactoring patches are mostly
directed at enabling LoongArch to wire up generic EFI boot support
without being forced to consume DT properties that conflict with
information that EFI also provides, e.g., memory map and reservations,
etc.
|
|
Expose the EFI boot time memory map to the kernel via a configuration
table. This is arch agnostic and enables future changes that remove the
dependency on DT on architectures that don't otherwise rely on it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Refactor the generic EFI stub entry code so that all the dependencies on
device tree are abstracted and hidden behind a generic efi_boot_kernel()
routine that can also be implemented in other ways. This allows users of
the generic stub to avoid using FDT for passing information to the core
kernel.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Use a EFI configuration table to pass the initrd to the core kernel,
instead of per-arch methods. This cleans up the code considerably, and
should make it easier for architectures to get rid of their reliance on
DT for doing EFI boot in the future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Currently, struct efi_boot_memmap is a struct that is passed around
between callers of efi_get_memory_map() and the users of the resulting
data, and which carries pointers to various variables whose values are
provided by the EFI GetMemoryMap() boot service.
This is overly complex, and it is much easier to carry these values in
the struct itself. So turn the struct into one that carries these data
items directly, including a flex array for the variable number of EFI
memory descriptors that the boot service may return.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The virt map is a set of efi_memory_desc_t descriptors that are passed
to SetVirtualAddressMap() to inform the firmware about the desired
virtual mapping of the regions marked as EFI_MEMORY_RUNTIME. The only
reason we currently call the efi_get_memory_map() helper is that it
gives us an allocation that is guaranteed to be of sufficient size.
However, efi_get_memory_map() has grown some additional complexity over
the years, and today, we're actually better off calling the EFI boot
service directly with a zero size, which tells us how much memory should
be enough for the virt map.
While at it, avoid creating the VA map allocation if we will not be
using it anyway, i.e., if efi_novamap is true.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Even though it is unlikely to ever make a difference, let's use u32
consistently for the size of the load_options provided by the firmware
(aka the command line)
While at it, do some general cleanup too: use efi_char16_t, avoid using
options_chars in places where it really means options_size, etc.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The stub is used in different execution environments, but on arm64,
RISC-V and LoongArch, we still use the core kernel's implementation of
memcpy and memset, as they are just a branch instruction away, and can
generally be reused even from code such as the EFI stub that runs in a
completely different address space.
KAsan complicates this slightly, resulting in the need for some hacks to
expose the uninstrumented, __ prefixed versions as the normal ones, as
the latter are instrumented to include the KAsan checks, which only work
in the core kernel.
Unfortunately, #define'ing memcpy to __memcpy when building C code does
not guarantee that no explicit memcpy() calls will be emitted. And with
the upcoming zboot support, which consists of a separate binary which
therefore needs its own implementation of memcpy/memset anyway, it's
better to provide one explicitly instead of linking to the existing one.
Given that EFI exposes implementations of memmove() and memset() via the
boot services table, let's wire those up in the appropriate way, and
drop the references to the core kernel ones.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Define the correct prototypes for the load_image, start_image and
unload_image boot service pointers so we can call them from the EFI
zboot code.
Also add some prototypes related to installation and deinstallation of
protocols in to the EFI protocol database, including some definitions
related to device paths.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add support for getting the boot hart ID from the Linux EFI stub using
RISCV_EFI_BOOT_PROTOCOL. This method is preferred over the existing DT
based approach since it works irrespective of DT or ACPI.
The specification of the protocol is hosted at:
https://github.com/riscv-non-isa/riscv-uefi
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Link: https://lore.kernel.org/r/20220519051512.136724-2-sunilvl@ventanamicro.com
[ardb: minor tweaks for coding style and whitespace]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In a future patch, arm64's implementation of handle_kernel_image() will
omit randomizing the placement of the kernel if the load address was
chosen randomly by the loader. In order to do this, it needs to locate a
protocol on the image handle, so pass it to handle_kernel_image().
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
UEFI DXE services are not yet used in kernel code
but are required to manipulate page table memory
protection flags.
Add required declarations to use DXE services functions.
Signed-off-by: Baskov Evgeniy <baskov@ispras.ru>
Link: https://lore.kernel.org/r/20220303142120.1975-2-baskov@ispras.ru
[ardb: ignore absent DXE table but warn if the signature check fails]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Before adding TPM measurement of the initrd contents, refactor the
initrd handling slightly to be more self-contained and consistent.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20211119114745.1560453-4-ilias.apalodimas@linaro.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Define the right prototype for efi_tcg2_protocol::hash_log_extend_event()
and add the required structs so we can start using it to measure the initrd
into the TPM if it was loaded by the EFI stub itself.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20211119114745.1560453-2-ilias.apalodimas@linaro.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Move TPM related definitions that are only used in the EFI stub into
efistub.h, which is a local header.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
efi_tcg2_protocol::get_event_log() takes a protocol pointer as the
first argument, not a EFI handle.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Now that ARM started following the example of arm64 and RISC-V, and
no longer imposes any restrictions on the placement of the FDT in
memory at boot, we no longer need per-arch implementations of
efi_get_max_fdt_addr() to factor out the differences. So get rid of
it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20201029134901.9773-1-ardb@kernel.org
|
|
Generalize the efi_get_secureboot() function so not only efistub but also
other subsystems can use it.
Note that the MokSbState handling is not factored out: the variable is
boot time only, and so it cannot be parameterized as easily. Also, the
IMA code will switch to this version in a future patch, and it does not
incorporate the MokSbState exception in the first place.
Note that the new efi_get_secureboot_mode() helper treats any failures
to read SetupMode as setup mode being disabled.
Co-developed-by: Chester Lin <clin@suse.com>
Signed-off-by: Chester Lin <clin@suse.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
At least some versions of Dell EFI firmware pass the entire
EFI_LOAD_OPTION descriptor, rather than just the OptionalData part, to
the loaded image. This was verified with firmware revision 2.15.0 on a
Dell Precision T3620 by Jacobo Pantoja.
To handle this, add a quirk to check if the options look like a valid
EFI_LOAD_OPTION descriptor, and if so, use the OptionalData part as the
command line.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reported-by: Jacobo Pantoja <jacobopantoja@gmail.com>
Link: https://lore.kernel.org/linux-efi/20200907170021.GA2284449@rani.riverdale.lan/
Link: https://lore.kernel.org/r/20200914213535.933454-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add an efi_warn logging helper for warnings, and implement an analog of
printk_once for once-only logging.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200914213535.933454-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Before commit
d0f9ca9be11f25ef ("ARM: decompressor: run decompressor in place if loaded via UEFI")
we were rather limited in the choice of base address for the uncompressed
kernel, as we were relying on the logic in the decompressor that blindly
rounds down the decompressor execution address to the next multiple of 128
MiB, and decompresses the kernel there. For this reason, we have a lot of
complicated memory region handling code, to ensure that this memory window
is available, even though it could be occupied by reserved regions or
other allocations that may or may not collide with the uncompressed image.
Today, we simply pass the target address for the decompressed image to the
decompressor directly, and so we can choose a suitable window just by
finding a 16 MiB aligned region, while taking TEXT_OFFSET and the region
for the swapper page tables into account.
So let's get rid of the complicated logic, and instead, use the existing
bottom up allocation routine to allocate a suitable window as low as
possible, and carve out a memory region that has the right properties.
Note that this removes any dependencies on the 'dram_base' argument to
handle_kernel_image(), and so this is removed as well. Given that this
was the only remaining use of dram_base, the code that produces it is
removed entirely as well.
Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Tested-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Permit arm32-stub.c to access efi_low_alloc_above() in a subsequent
patch by giving it external linkage and declaring it in efistub.h.
Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Tested-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The prototype of the functions handle_kernel_image & efi_enter_kernel
are defined in efi-stub.c which may result in a compiler warnings if
-Wmissing-prototypes is set in gcc compiler.
Move the prototype to efistub.h to make the compiler happy.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20200706172609.25965-2-atish.patra@wdc.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
On 32-bit ARM, we may boot at HYP mode, or with the MMU and caches off
(or both), even though the EFI spec does not actually support this.
While booting at HYP mode is something we might tolerate, fiddling
with the caches is a more serious issue, as disabling the caches is
tricky to do safely from C code, and running without the Dcache makes
it impossible to support unaligned memory accesses, which is another
explicit requirement imposed by the EFI spec.
So take note of the CPU mode and MMU state in the EFI stub diagnostic
output so that we can easily diagnose any issues that may arise from
this. E.g.,
EFI stub: Entering in SVC mode with MMU enabled
Also, capture the CPSR and SCTLR system register values at EFI stub
entry, and after ExitBootServices() returns, and check whether the
MMU and Dcache were disabled at any point. If this is the case, a
diagnostic message like the following will be emitted:
efi: [Firmware Bug]: EFI stub was entered with MMU and Dcache disabled, please fix your firmware!
efi: CPSR at EFI stub entry : 0x600001d3
efi: SCTLR at EFI stub entry : 0x00c51838
efi: CPSR after ExitBootServices() : 0x600001d3
efi: SCTLR after ExitBootServices(): 0x00c50838
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
|
|
Provide missing descriptions for EFI stub helper functions.
Adjust formatting of existing descriptions to kernel style.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Link: https://lore.kernel.org/r/20200615234231.21059-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
More EFI changes for v5.8:
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character strings
- Some fixes for issues introduced by the first batch of v5.8 changes
- Fix a missing prototypes warning
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups
Conflicts:
drivers/firmware/efi/libstub/efistub.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix a missing prototype warning by adding a forward declaration
for the PE/COFF entrypoint, and while at it, align the function
name between the x86 and ARM versions of the stub.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Now that we removed the memory limit for the allocation of the
command line, there is no longer a need to use the page based
allocator so switch to a pool allocation instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add video=efifb:list option to list the modes that are available.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-20-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add the required typedefs etc for using con_in's simple text input
protocol, and for using the boottime event services.
Also add the prototype for the "stall" boot service.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-19-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Use the efi_printk function in efi_info/efi_err, and add efi_debug. This
allows formatted output at different log levels.
Add the notion of a loglevel instead of just quiet/not-quiet, and
parse the efi=debug kernel parameter in addition to quiet.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200520170223.GA3333632@rani.riverdale.lan/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Copy vsprintf from arch/x86/boot/printf.c to get a simple printf
implementation.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-5-nivedita@alum.mit.edu
[ardb: add some missing braces in if...else clauses]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
These functions do not support formatting, unlike printk. Rename them to
puts to make that clear.
Move the implementations of these two functions next to each other.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-3-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add #include directives for include files that efistub.h depends on,
instead of relying on them having been included by the C source files
prior to efistub.h.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In allocate_e820(), call the EFI get_memory_map() service directly
instead of indirectly via efi_get_memory_map(). This avoids allocation
of a buffer and return of the full EFI memory map, which is not needed
here and would otherwise need to be freed.
Routine allocate_e820() only needs to know how many EFI memory
descriptors there are in the map to allocate an adequately sized
e820ext buffer, if it's needed. Note that since efi_get_memory_map()
returns a memory map buffer sized with extra headroom, allocate_e820()
now needs to explicitly factor that into the e820ext size calculation.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
To help the compiler figure out that efi_printk() will not modify
the string it is given, make the input argument type const char*.
While at it, simplify the implementation as well.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Commit
22090f84bc3f ("efi/libstub: unify EFI call wrappers for non-x86")
refactored the macros that are used to provide wrappers for mixed-mode
calls on x86, allowing us to boot a 64-bit kernel on 32-bit firmware.
Unfortunately, this broke mixed mode boot due to the fact that
efi_is_native() is not a macro on x86.
All of these macros should go together, so rather than testing each one
to see if it is defined, condition the generic macro definitions on a
new ARCH_HAS_EFISTUB_WRAPPERS, and remove the wrapper definitions on x86
as well if CONFIG_EFI_MIXED is not enabled.
Fixes: 22090f84bc3f ("efi/libstub: unify EFI call wrappers for non-x86")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200504150248.62482-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Factor out the initrd loading into a common function that can be called
both from the generic efi-stub.c and the x86-specific x86-stub.c.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-10-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Rename pr_efi to efi_info and pr_efi_err to efi_err to make it more
obvious that they are part of the EFI stub and not generic printk infra.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In several places 64-bit values need to be split up into two 32-bit
fields, in order to be backward-compatible with the old 32-bit ABIs.
Instead of open-coding this, add a helper function to set a 64-bit value
as two 32-bit fields.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-3-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The practice of using __pure getter functions to access global
variables in the EFI stub dates back to the time when we had to
carefully prevent GOT entries from being emitted, because we
could not rely on the toolchain to do this for us.
Today, we use the hidden visibility pragma for all EFI stub source
files, which now all live in the same subdirectory, and we apply a
sanity check on the objects, so we can get rid of these getter
functions and simply refer to global data objects directly.
So switch over the remaining boolean variables carrying options set
on the kernel command line.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The practice of using __pure getter functions to access global
variables in the EFI stub dates back to the time when we had to
carefully prevent GOT entries from being emitted, because we
could not rely on the toolchain to do this for us.
Today, we use the hidden visibility pragma for all EFI stub source
files, which now all live in the same subdirectory, and we apply a
sanity check on the objects, so we can get rid of these getter
functions and simply refer to global data objects directly.
Start with efi_system_table(), and convert it into a global variable.
While at it, make it a pointer-to-const, because we can.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Now that both arm and x86 are using the linker script to place the EFI
stub's global variables in the correct section, remove __efistub_global.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200416151227.3360778-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Instead of using __efistub_global to force variables into the .data
section, leave them in the .bss but pull the EFI stub's .bss section
into .data in the linker script for the compressed kernel.
Add relocation checking for x86 as well to catch non-PC-relative
relocations that require runtime processing, since the EFI stub does not
do any runtime relocation processing.
This will catch, for example, data relocations created by static
initializers of pointers.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200416151227.3360778-3-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Instead of using __efistub_global to force variables into the .data
section, leave them in the .bss but pull the EFI stub's .bss section
into .data in the linker script for the compressed kernel.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200416151227.3360778-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Move efi_relocate_kernel() into a separate source file, so that it
only gets pulled into builds for architectures that use it. Since
efi_relocate_kernel() is the only user of efi_low_alloc(), let's
move that over as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Break out the code to create an aligned page allocation from mem.c
and move it into a function efi_allocate_pages_aligned() in alignedmem.c.
Update efi_allocate_pages() to invoke it unless the minimum alignment
equals the EFI page size (4 KB), in which case the ordinary page
allocator is sufficient. This way, efi_allocate_pages_aligned() will
only be pulled into the build if it is actually being used (which will
be on arm64 only in the immediate future)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
