Age | Commit message (Collapse) | Author | Files | Lines |
|
dsp_chan->name and chan_name points to same block of memory,
because dev_err still needs to be used it,so we need free
it's memory after use to avoid use_after_free.
Fixes: e527adfb9b7d ("firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
If mbox_request_channel_byname() fails, the memory allocated a few lines
above still need to be freed before going to the error handling path.
Fixes: 046326989a18 ("firmware: imx: Save channel name for further use")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pull ARM SoC cleanups from Arnd Bergmann:
"These are all minor cleanups for platform specific code in arch/arm/
and some of the associated drivers. The majority of these are work
done by Rob Herring to improve the way devicetreee header files are
handled"
* tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits)
ARM: davinci: Drop unused includes
ARM: s5pv210: Explicitly include correct DT includes
ARM: dove: Drop unused includes
ARM: mvebu: Explicitly include correct DT includes
Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung
MAINTAINER: samsung: document dtbs_check requirement for Samsung
Documentation/process: maintainer-soc: add clean platforms profile
MAINTAINERS: soc: reference maintainer profile
ARM: nspire: Remove unused header file mmio.h
ARM: nspire: Use syscon-reboot to handle restart
soc: fsl: Explicitly include correct DT includes
soc: xilinx: Explicitly include correct DT includes
soc: sunxi: Explicitly include correct DT includes
soc: rockchip: Explicitly include correct DT includes
soc: mediatek: Explicitly include correct DT includes
soc: aspeed: Explicitly include correct DT includes
firmware: Explicitly include correct DT includes
bus: Explicitly include correct DT includes
ARM: spear: Explicitly include correct DT includes
ARM: mvebu: Explicitly include correct DT includes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main change this time was the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other
firmware drivers.
On the soc driver side, the updates are mostly cleanups across a
number of Arm platforms. On driver for loongarch adds power management
for DT based systems, another driver is for HiSilicon's Arm server
chips with their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform"
* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
bus: fsl-mc: Use common ranges functions
soc: kunpeng_hccs: fix some sparse warnings about incorrect type
soc: loongson2_pm: add power management support
soc: dt-bindings: add loongson-2 pm
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
bus: ti-sysc: Fix cast to enum warning
soc: kunpeng_hccs: add MAILBOX dependency
MAINTAINERS: remove OXNAS entry
dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
soc: kunpeng_hccs: fix size_t format string
soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
dt-bindings: firmware: qcom: scm: Updating VMID list
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
...
|
|
Move scu-pd driver under genpd directory where the driver
should be.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230803-dt-header-cleanups-for-soc-v2-17-d8de2cc88bff@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Record SCU wakeup interrupt in /sys/power/pm_wakeup_irq
The user can further identify the exact wakeup source by using the
following interface:
cat /sys/firmware/scu_wakeup_source/wakeup_src
The above will print the wake groups and the irqs that could have
contributed to waking up the kernel. For example if ON/OFF button was the
wakeup source:
cat /sys/firmware/scu_wakeup_source/wakeup_src
Wakeup source group = 3, irq = 0x1
The user can refer to the SCFW API documentation to identify all the
wake groups and irqs.
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per SCFW update, update the IMX_SC_IRQ_NUM_GROUP to 9.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Extract the scu irq get status code from imx_scu_irq_work_handler and
make into a new function imx_scu_irq_get_status which could be used
by others, such as SECO.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use blocking_notifier_chain instead of atomic_notifier_chain, otherwise
there will be RCU complaint, because unregister/register_virtio_device()
will issue mbox message.
mbox_send_message() is blocking again after received M4 partition reset.
Actually, no need atomic notifier for scu irq notification since this
notifier is called in worker instead of interrupt handler.
[ 389.706645] i2c-rpmsg virtio0.rpmsg-i2c-channel.-1.2: i2c rpmsg driver is removed
[ 389.767362] Wait for remote ready timeout, use first_notify.
[ 389.774084] ------------[ cut here ]------------
[ 389.778729] WARNING: CPU: 0 PID: 397 at kernel/rcu/tree_plugin.h:293 rcu_note_context_switch+0x34/0x338
[ 389.788131] Modules linked in:
[ 389.791195] CPU: 0 PID: 397 Comm: kworker/0:13 Not tainted 5.4.0-rc5-02977-g08f78722f07b #26
[ 389.799633] Hardware name: Freescale i.MX8DXL MEK (DT)
[ 389.805481] Workqueue: events imx_scu_irq_work_handler
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Same as soc-imx8m and soc-imx driver, use soc name for soc_id which is
user friendly.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
When system loading is high, we can meet some command timeout
issue occasionally, so increase the timeout to a safe value.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Change firmware init level to subsys_initcall_sync to ensure it's
probed before most devices to avoid unnecessary defer probe.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
LVDS' lpi2c and pwm power domains definitions are missed.
Add them here.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This simplifies the code and silences -517 error messages. Also
the reason is listed in /sys/kernel/debug/devices_deferred.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
USB_1_PHY is not defined in pd driver on 8DXL.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
the vpu core depends on the mu resources.
if they're missed, the vpu can't work.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add resource owner management API, this API could be used to check
whether M4 is under control of Linux.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
ADC1 is not defined in pd driver on 8QM.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Since the introduction of the PM domain support for the scu-pd, the genpd
framework has been continuously improved. More preciously, using a single
global power domain can quite easily be deployed for imx platforms.
To avoid confusions, let's therefore make an update to the comments about
the missing pieces.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Do not power off console domain in runtime pm.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix build error in firmware/imx/ selecting SOC_BUS.
riscv32-linux-ld: drivers/firmware/imx/imx-scu-soc.o: in function `.L9':
imx-scu-soc.c:(.text+0x1b0): undefined reference to `soc_device_register'
Fixes: edbee095fafb ("firmware: imx: add SCU firmware driver support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
subsystem
This patch adds the main power domain, pwm0 power domain and i2c0/1
power domains support for i.MX8qxp MIPI1 subsystem.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
subsystem
This patch adds the main power domain support for i.MX8qxp LVDS1 subsystem.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
subsystem
This patch adds video0/1 power domains support for i.MX8qxp DC0 subsystem.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
In order to save power, we only need to request a channel
when the communication with the DSP active.
For this we export the following functions:
- imx_dsp_request_channel, gets a channel with a given index
- imx_dsp_free_channel, frees a channel with a given index
Notice that we still request channels at probe to support devices
that do not have PM callbacks implemented.
More explanations about why requesting a channel has an effect
on power savings:
- requesting an mailbox channel will call mailbox's startup
function.
- startup function calls pm_runtime_get_sync which increments device
usage count and will keep the device active. Specifically, mailbox
clock will be always ON when a mailbox channel is requested.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
We want to request / free channels on demand later in order
to save power.
For this for each channel we save the name and use it to
reference the channel later.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Create a separate function that sets up DSP mailbox channels
so that imx_dsp_probe function will be easier to read.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The power domains are for imx8qxp/imx8qm JPEG encoder & decoder.
Each has 4 slots and a wrapper.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Should not register power domain that not owned by current
partition.
Alought power domains will not be registered when power on failure,
we have to let CPU waste more cycles.
Whether power on or owned check, both need communicate with SCU,
but with owned check, we no need to run more code path to save CPU
cycles.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The i.MX SCU soc driver depends on SCU firmware driver, so it has to
use platform driver model for proper defer probe operation, since
it has no device binding in DT file, a simple platform device is
created together inside the platform driver. To make it more clean,
we can just move the entire SCU soc driver into imx firmware folder
and initialized by i.MX SCU firmware driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add more cm4 resources, then linux could use cm4's i2c/lpuart and
could kick cm4 core.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add resource management API, when we have multiple
partition running together, resources not owned to current
partition should not be used.
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The postfix needs to be false. Alought compiler use 0 for postfix now,
and take start_from as 0, it is better we add explicit false to postfix.
Fixes: 705dcca91d0a("firmware: imx: scu-pd: add power domain for I2C and INTMUX in CM40 SS")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
IRQF_NO_SUSPEND flag is set for MU IRQ of IPC work, but with this
flag set, IRQD_WAKEUP_ARMED flag will NOT be set during
suspend_device_irq() phase, then when MU IRQ arrives, it will NOT
wake up system from suspend.
To fix this issue, pm_system_wakeup() is called in general MU IRQ
handler to make sure system can be waked up when MU IRQ arrives.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.8:
- Optimize imx-scu driver to use one TX and one RX instead of four for
talking to SCU.
- Fix one possible message header corruption where the response is
longer than the request.
- Move System Control defines into dt-bindings header, so that DT can
use them as well.
- A couple of small fixups.
* tag 'imx-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: scu: Fix possible memory leak in imx_scu_probe()
dt-bindings: firmware: imx: Add more system controls and PM clock types
dt-bindings: firmware: imx: Move system control into dt-binding headfile
firmware: imx: scu: Fix corruption of header
firmware: imx-scu: Support one TX and one RX
soc: imx8m: No need to put node when of_find_compatible_node() failed
Link: https://lore.kernel.org/r/20200523032516.11016-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
'chan_name' is malloced in imx_scu_probe() and should be freed
before leaving from the error handling cases, otherwise it will
cause memory leak.
Fixes: edbee095fafb ("firmware: imx: add SCU firmware driver support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX8 SoCs DTS file needs system control macro definitions, so move them
into dt-binding headfile, then include/linux/firmware/imx/types.h can be
removed and those drivers using it should be changed accordingly.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The header of the message to send can be changed if the
response is longer than the request:
- 1st word, the header is sent
- the remaining words of the message are sent
- the response is received asynchronously during the
execution of the loop, changing the size field in
the header
- the for loop test the termination condition using
the corrupted header
It is the case for the API build_info which has just a
header as request but 3 words in response.
This issue is fixed storing the header locally instead of
using a pointer on it.
Fixes: edbee095fafb (firmware: imx: add SCU firmware driver support)
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Current imx-scu requires four TX and four RX to communicate with
SCU. This is low efficient and causes lots of mailbox interrupts.
With imx-mailbox driver could support one TX to use all four transmit
registers and one RX to use all four receive registers, imx-scu
could use one TX and one RX.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
It is nice to allow compile-testing the firmware drivers, but this
fails when the dependency is a loadable module:
aarch64-linux-ld: drivers/firmware/imx/scu-pd.o: in function `imx_sc_pd_power':
scu-pd.c:(.text+0xd8): undefined reference to `imx_scu_call_rpc'
aarch64-linux-ld: scu-pd.c:(.text+0x108): undefined reference to `imx_scu_call_rpc'
aarch64-linux-ld: drivers/firmware/imx/scu-pd.o: in function `imx_sc_pd_probe':
Change the dependencies to ensure that any driver we depend on is
either reachable or we are compile-testing and it is disabled,
effectively reverting most of the previous changes that turned
out to be incorrect.
Fixes: a9f85f93ed73 ("firmware: imx: add COMPILE_TEST support")
Fixes: 5b00b8375416 ("firmware: imx: add COMPILE_TEST for IMX_SCU driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200408190314.695067-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"These are the usual updates for SoC specific device drivers and
related subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
and TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers"
* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
memory: tegra: Correct debugfs clk rate-range on Tegra124
memory: tegra: Correct debugfs clk rate-range on Tegra30
memory: tegra: Correct debugfs clk rate-range on Tegra20
...
|
|
Add COMPILE_TEST support to i.MX SCU drivers for better compile
testing coverage.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/1583509356-8265-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add COMPILE_TEST support to IMX_SCU driver for better compile
testing coverage. Any driver depending on IMX_SCU shouldn't have
COMPILE_TEST though.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add power domain for I2C and INTMUX in CM40 SS.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y.
Fix by marking with __aligned(4).
Fixes: d90bf296ae18 ("firmware: imx: Add support to start/stop a CPU")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y.
Fix by marking with __aligned(4).
Fixes: c800cd7824bd ("firmware: imx: add SCU power domain driver")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y:
BUG: KASAN: stack-out-of-bounds in imx_mu_send_data+0x108/0x1f0
It shouldn't cause an issues in normal use because these structs are
always allocated on the stack.
Fixes: 15e1f2bc8b3b ("firmware: imx: add misc svc support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
SCU requires that all messages words are written sequentially but linux MU
driver implements multiple independent channels for each register so ordering
between different channels must be ensured by SCU API interface.
Wait for tx_done before every send to ensure that no queueing happens at the
mailbox channel level.
Fixes: edbee095fafb ("firmware: imx: add SCU firmware driver support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by:: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The range of resources for Messaging Units side B needs to contain
all the possible MUB resource available: starting from MU_5B up to
MU_13B.
This patch is needed to enable MU_8B for the 'imx-shmem-net' driver
which allows two OS partitions communicating via MUs without Hypervisor.
Signed-off-by: Sebastien Fagard <sebastien.fagard@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|