summaryrefslogtreecommitdiff
path: root/drivers/firmware
AgeCommit message (Collapse)AuthorFilesLines
2019-06-21Merge tag 'spdx-5.2-rc6' of ↵Linus Torvalds3-12/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2-8/+2
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this file is part of the linux kernel and is made available under the terms of the gnu general public license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 28 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.534229504@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18firmware: trusted_foundations: add ARMv7 dependencyArnd Bergmann1-1/+1
The "+sec" extension is invalid for older ARM architectures, but the code can now be built on any ARM configuration: /tmp/trusted_foundations-2d0882.s: Assembler messages: /tmp/trusted_foundations-2d0882.s:194: Error: architectural extension `sec' is not allowed for the current base architecture /tmp/trusted_foundations-2d0882.s:201: Error: selected processor does not support `smc #0' in ARM mode /tmp/trusted_foundations-2d0882.s:213: Error: architectural extension `sec' is not allowed for the current base architecture /tmp/trusted_foundations-2d0882.s:220: Error: selected processor does not support `smc #0' in ARM mode Add a dependency on ARMv7 for the build. Fixes: 4cb5d9eca143 ("firmware: Move Trusted Foundations support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-16Merge tag 'imx-fixes-5.2' of ↵Olof Johansson1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 5.2: - A build fix for soc-imx8 driver which needs SOC_BUS support. To avoid dealing with the dependency for every single i.MX SoC bus driver, we selects at from architecture level. - A fix on i.MX SCU firmware driver to ensure SCU irq is enabled only after IPC is ready. - A regression fix on cpuidle-imx6sx driver, which causes some characters loss on serial communication. * tag 'imx-fixes-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX firmware: imx: SCU irq should ONLY be enabled after SCU IPC is ready arm64: imx: Fix build error without CONFIG_SOC_BUS Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446Thomas Gleixner1-7/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 30 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.962665879@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428Thomas Gleixner2-4/+2
Based on 1 normalized pattern(s): this file is released under the gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 68 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner3-28/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 287Thomas Gleixner14-129/+14
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license v2 0 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 23 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.115786599@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner3-28/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 267Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 94 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141334.043630402@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-02Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Two EFI fixes: a quirk for weird systabs, plus add more robust error handling in the old 1:1 mapping code" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Allow the number of EFI configuration tables entries to be zero efi/x86/Add missing error handling to old_memmap 1:1 mapping code
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner2-24/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 191Thomas Gleixner1-2/+1
Based on 1 normalized pattern(s): licensed under gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 99 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.163048684@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner2-16/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-10/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25efi: Allow the number of EFI configuration tables entries to be zeroRob Bradford1-0/+3
Only try and access the EFI configuration tables if there there are any reported. This allows EFI to be continued to used on systems where there are no configuration table entries. Signed-off-by: Rob Bradford <robert.bradford@intel.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Gen Zhang <blackgod016574@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190525112559.7917-3-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner13-0/+13
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner2-0/+2
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20firmware: imx: SCU irq should ONLY be enabled after SCU IPC is readyAnson Huang1-0/+3
The imx_scu_irq_group_enable() is normally called during module driver probe phase to enable SCU group irq, if SCU IPC is NOT ready, below dump will show out: [ 0.933001] Hardware name: Freescale i.MX8QXP MEK (DT) [ 0.938129] pstate: 60000005 (nZCv daif -PAN -UAO) [ 0.942907] pc : imx_scu_call_rpc+0x114/0x158 [ 0.947251] lr : imx_scu_irq_group_enable+0x74/0xc4 [ 0.952113] sp : ffff00001005bae0 [ 0.955415] x29: ffff00001005bae0 x28: ffff0000111bb0a0 [ 0.960712] x27: ffff00001140b000 x26: ffff00001111068c [ 0.966011] x25: ffff0000111bb100 x24: 0000000000000000 [ 0.971311] x23: ffff0000113d9cd8 x22: 0000000000000001 [ 0.976610] x21: 0000000000000001 x20: ffff80083b51a410 [ 0.981909] x19: ffff000011259000 x18: 0000000000000480 [ 0.987209] x17: 000000000023ffb8 x16: 0000000000000010 [ 0.992508] x15: 000000000000023f x14: ffffffffffffffff [ 0.997807] x13: 0000000000000018 x12: 0000000000000030 [ 1.003107] x11: 0000000000000003 x10: 0101010101010101 [ 1.008406] x9 : ffffffffffffffff x8 : 7f7f7f7f7f7f7f7f [ 1.013706] x7 : fefefeff646c606d x6 : 0000000000000000 [ 1.019005] x5 : ffff0000112596c8 x4 : 0000000000000008 [ 1.024304] x3 : 0000000000000003 x2 : 0000000000000001 [ 1.029604] x1 : ffff00001005bb58 x0 : 0000000000000000 [ 1.034905] Call trace: [ 1.037341] imx_scu_call_rpc+0x114/0x158 [ 1.041334] imx_scu_irq_group_enable+0x74/0xc4 [ 1.045856] imx_sc_wdt_probe+0x24/0x150 [ 1.049766] platform_drv_probe+0x4c/0xb0 [ 1.053762] really_probe+0x1f8/0x2c8 [ 1.057407] driver_probe_device+0x58/0xfc [ 1.061490] device_driver_attach+0x68/0x70 [ 1.065660] __driver_attach+0x94/0xdc [ 1.069397] bus_for_each_dev+0x64/0xc0 [ 1.073220] driver_attach+0x20/0x28 [ 1.076782] bus_add_driver+0x148/0x1fc [ 1.080601] driver_register+0x68/0x120 [ 1.084424] __platform_driver_register+0x4c/0x54 [ 1.089120] imx_sc_wdt_driver_init+0x18/0x20 [ 1.093463] do_one_initcall+0x58/0x1b8 [ 1.097287] kernel_init_freeable+0x1cc/0x288 [ 1.101630] kernel_init+0x10/0x100 [ 1.105101] ret_from_fork+0x10/0x18 [ 1.108669] ---[ end trace 9e03302114457de9 ]--- [ 1.113296] enable irq failed, group 1, mask 1, ret -22 To avoid such scenario, return -EPROBE_DEFER in imx_scu_irq_group_enable() API if SCU IPC is NOT ready, then module driver which calls this API in probe phase will defer probe after SCU IPC ready. Fixes: 851826c7566e ("firmware: imx: enable imx scu general irq function") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-19Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-0/+753
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull IRQ chip updates from Ingo Molnar: "A late irqchips update: - New TI INTR/INTA set of drivers - Rewrite of the stm32mp1-exti driver as a platform driver - Update the IOMMU MSI mapping API to be RT friendly - A number of cleanups and other low impact fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) iommu/dma-iommu: Remove iommu_dma_map_msi_msg() irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg() irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg() irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg() irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg() iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts genirq/msi: Add a new field in msi_desc to store an IOMMU cookie arm64: arch_k3: Enable interrupt controller drivers irqchip/ti-sci-inta: Add msi domain support soc: ti: Add MSI domain bus support for Interrupt Aggregator irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings irqchip/ti-sci-intr: Add support for Interrupt Router driver dt-bindings: irqchip: Introduce TISCI Interrupt router bindings gpio: thunderx: Use the default parent apis for {request,release}_resources genirq: Introduce irq_chip_{request,release}_resource_parent() apis firmware: ti_sci: Add helper apis to manage resources firmware: ti_sci: Add RM mapping table for am654 firmware: ti_sci: Add support for IRQ management firmware: ti_sci: Add support for RM core ops ...
2019-05-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds7-77/+302
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...
2019-05-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds3-0/+193
Pull ARM SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms. Major themes this release: - Conversion of ixp4xx to a modern platform (drivers, DT, bindings) - Moving some of the ep93xx headers around to get it closer to multiplatform enabled. - Cleanups of Davinci This also contains a few patches that were queued up as fixes before 5.1 but I didn't get sent in before release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) ARM: debug-ll: add default address for digicolor ARM: u300: regulator: add MODULE_LICENSE() ARM: ep93xx: move private headers out of mach/* ARM: ep93xx: move pinctrl interfaces into include/linux/soc ARM: ep93xx: keypad: stop using mach/platform.h ARM: ep93xx: move network platform data to separate header ARM: stm32: add AMBA support for stm32 family MAINTAINERS: update arch/arm/mach-davinci ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ...
2019-05-07Merge tag 'char-misc-5.2-rc1-part2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc update part 2 from Greg KH: "Here is the "real" big set of char/misc driver patches for 5.2-rc1 Loads of different driver subsystem stuff in here, all over the places: - thunderbolt driver updates - habanalabs driver updates - nvmem driver updates - extcon driver updates - intel_th driver updates - mei driver updates - coresight driver updates - soundwire driver cleanups and updates - fastrpc driver updates - other minor driver updates - chardev minor fixups Feels like this tree is getting to be a dumping ground of "small driver subsystems" these days. Which is fine with me, if it makes things easier for those subsystem maintainers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) intel_th: msu: Add current window tracking intel_th: msu: Add a sysfs attribute to trigger window switch intel_th: msu: Correct the block wrap detection intel_th: Add switch triggering support intel_th: gth: Factor out trace start/stop intel_th: msu: Factor out pipeline draining intel_th: msu: Switch over to scatterlist intel_th: msu: Replace open-coded list_{first,last,next}_entry variants intel_th: Only report useful IRQs to subdevices intel_th: msu: Start handling IRQs intel_th: pci: Use MSI interrupt signalling intel_th: Communicate IRQ via resource intel_th: Add "rtit" source device intel_th: Skip subdevices if their MMIO is missing intel_th: Rework resource passing between glue layers and core intel_th: SPDX-ify the documentation intel_th: msu: Fix single mode with IOMMU coresight: funnel: Support static funnel dt-bindings: arm: coresight: Unify funnel DT binding coresight: replicator: Add new device id for static replicator ...
2019-05-07Merge tag 'pm-5.2-rc1' of ↵Linus Torvalds6-50/+95
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These fix the (Intel-specific) Performance and Energy Bias Hint (EPB) handling and expose it to user space via sysfs, fix and clean up several cpufreq drivers, add support for two new chips to the qoriq cpufreq driver, fix, simplify and clean up the cpufreq core and the schedutil governor, add support for "CPU" domains to the generic power domains (genpd) framework and provide low-level PSCI firmware support for that feature, fix the exynos cpuidle driver and fix a couple of issues in the devfreq subsystem and clean it up. Specifics: - Fix the handling of Performance and Energy Bias Hint (EPB) on Intel processors and expose it to user space via sysfs to avoid having to access it through the generic MSR I/F (Rafael Wysocki). - Improve the handling of global turbo changes made by the platform firmware in the intel_pstate driver (Rafael Wysocki). - Convert some slow-path static_cpu_has() callers to boot_cpu_has() in cpufreq (Borislav Petkov). - Fix the frequency calculation loop in the armada-37xx cpufreq driver (Gregory CLEMENT). - Fix possible object reference leaks in multuple cpufreq drivers (Wen Yang). - Fix kerneldoc comment in the centrino cpufreq driver (dongjian). - Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan Kumar). - Add support for lx2160a and ls1028a to the qoriq cpufreq driver (Vabhav Sharma, Yuantian Tang). - Fix kobject memory leak in the cpufreq core (Viresh Kumar). - Simplify the IOwait boosting in the schedutil cpufreq governor and rework the TSC cpufreq notifier on x86 (Rafael Wysocki). - Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin). - Improve the cpufreq documentation, add SPDX license tags to some PM documentation files and unify copyright notices in them (Rafael Wysocki). - Add support for "CPU" domains to the generic power domains (genpd) framework and provide low-level PSCI firmware support for that feature (Ulf Hansson). - Rearrange the PSCI firmware support code and add support for SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla). - Improve genpd support for devices in multiple power domains (Ulf Hansson). - Unify target residency for the AFTR and coupled AFTR states in the exynos cpuidle driver (Marek Szyprowski). - Introduce new helper routine in the operating performance points (OPP) framework (Andrew-sh.Cheng). - Add support for passing on-die termination (ODT) and auto power down parameters from the kernel to Trusted Firmware-A (TF-A) to the rk3399_dmc devfreq driver (Enric Balletbo i Serra). - Add tracing to devfreq (Lukasz Luba). - Make the exynos-bus devfreq driver suspend all devices on system shutdown (Marek Szyprowski). - Fix a few minor issues in the devfreq subsystem and clean it up somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring, Saravana Kannan, Yangtao Li). - Improve system wakeup diagnostics (Stephen Boyd). - Rework filesystem sync messages emitted during system suspend and hibernation (Harry Pan)" * tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits) cpufreq: Fix kobject memleak cpufreq: armada-37xx: fix frequency calculation for opp cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment cpufreq: qoriq: add support for lx2160a x86: tsc: Rework time_cpufreq_notifier() PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name() PM / Domains: Search for the CPU device outside the genpd lock PM / Domains: Drop unused in-parameter to some genpd functions PM / Domains: Use the base device for driver_deferred_probe_check_state() cpufreq: qoriq: Add ls1028a chip support PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev() PM / Domains: Don't kfree() the virtual device in the error path cpufreq: Move ->get callback check outside of __cpufreq_get() PM / Domains: remove unnecessary unlikely() cpufreq: Remove needless bios_limit check in show_bios_limit() drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning firmware/psci: add support for SYSTEM_RESET2 PM / devfreq: add tracing for scheduling work trace: events: add devfreq trace event file ...
2019-05-07Merge tag 'acpi-5.2-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These rearrange the ACPI documentation by converting it to the .rst format and splitting it into clear categories (admin guide, driver API, firmware guide), switch over multiple users of a problematic library function to a new better one, update the ACPICA code in the kernel to a new upstream release, fix a few issues, improve power device management diagnostics and do some cleanups. Specifics: - Convert the ACPI documentation in the kernel source tree to the .rst format and split it into the admin guide, driver API and firmware guide parts (Changbin Du). - Add a PRP0001 usage example to the ACPI documentation (Thomas Preston). - Switch over the users of the acpi_dev_get_first_match_name() library function which turned out to be problematic to a new, better one called acpi_dev_get_first_match_dev() (Andy Shevchenko, YueHaibing). - Update the ACPICA code in the kernel to upstream release 20190405 including: * Null pointer dereference check in acpi_ns_delete_node() (Erik Schmauss). * Multiple macro and function name changes (Bob Moore). * Predefined operation region name fix (Erik Schmauss). - Fix hibernation issue on systems using the Baytrail and Cherrytrail Intel SoCs introduced during the 4.20 development cycle (Hans de Goede). - Add Sony VPCEH3U1E to the backlight quirk list (Zhang Rui). - Fix button handling during system resume (Zhang Rui). - Add a device PM diagnostic message (Rafael Wysocki). - Clean up the code, comments and white space in multiple places (Bjorn Helgaas, Gustavo Silva, Kefeng Wang)" * tag 'acpi-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) Documentation: ACPI: move video_extension.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move ssdt-overlays.txt to admin-guide/acpi and convert to reST Documentation: ACPI: move lpit.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move cppc_sysfs.txt to admin-guide/acpi and convert to reST Documentation: ACPI: move apei/einj.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move apei/output_format.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move aml-debugger.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move method-tracing.txt to firmware-guide/acpi and convert to rsST Documentation: ACPI: move debug.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move dsd/data-node-references.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move dsd/graph.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move acpi-lid.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move i2c-muxes.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move dsdt-override.txt to admin-guide/acpi and convert to reST Documentation: ACPI: move initrd_table_override.txt to admin-guide/acpi and convert to reST Documentation: ACPI: move method-customizing.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move gpio-properties.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move DSD-properties-rules.txt to firmware-guide/acpi and covert to reST Documentation: ACPI: move scan_handlers.txt to driver-api/acpi and convert to reST Documentation: ACPI: move linuxized-acpica.txt to driver-api/acpi and convert to reST ...
2019-05-07Merge tag 'arm64-upstream' of ↵Linus Torvalds2-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "Mostly just incremental improvements here: - Introduce AT_HWCAP2 for advertising CPU features to userspace - Expose SVE2 availability to userspace - Support for "data cache clean to point of deep persistence" (DC PODP) - Honour "mitigations=off" on the cmdline and advertise status via sysfs - CPU timer erratum workaround (Neoverse-N1 #1188873) - Introduce perf PMU driver for the SMMUv3 performance counters - Add config option to disable the kuser helpers page for AArch32 tasks - Futex modifications to ensure liveness under contention - Rework debug exception handling to seperate kernel and user handlers - Non-critical fixes and cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits) Documentation: Add ARM64 to kernel-parameters.rst arm64/speculation: Support 'mitigations=' cmdline option arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB arm64: enable generic CPU vulnerabilites support arm64: add sysfs vulnerability show for speculative store bypass arm64: Fix size of __early_cpu_boot_status clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters clocksource/arm_arch_timer: Remove use of workaround static key clocksource/arm_arch_timer: Drop use of static key in arch_timer_reg_read_stable clocksource/arm_arch_timer: Direcly assign set_next_event workaround arm64: Use arch_timer_read_counter instead of arch_counter_get_cntvct watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct ARM: vdso: Remove dependency with the arch_timer driver internals arm64: Apply ARM64_ERRATUM_1188873 to Neoverse-N1 arm64: Add part number for Neoverse N1 arm64: Make ARM64_ERRATUM_1188873 depend on COMPAT arm64: Restrict ARM64_ERRATUM_1188873 mitigation to AArch32 arm64: mm: Remove pte_unmap_nested() arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable arm64: compat: Reduce address limit for 64K pages ...
2019-05-01firmware: ti_sci: Add helper apis to manage resourcesLokesh Vutla1-0/+130
Each resource with in the device can be uniquely identified as defined by TISCI. Since this is generic across the devices, resource allocation also can be made generic instead of each client driver handling the resource. So add helper apis to manage the resource. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-01firmware: ti_sci: Add RM mapping table for am654Peter Ujfalusi1-0/+23
Add the resource mapping table for AM654 SoC as defined in http://downloads.ti.com/tisci/esd/latest/5_soc_doc/am6x/resasg_types.html Introduce a new compatible for AM654 "ti,am654-sci" for using this resource map table. Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-01firmware: ti_sci: Add support for IRQ managementLokesh Vutla2-0/+305
TISCI abstracts the handling of IRQ routes where interrupt sources are not directly connected to host interrupt controller. Add support for the set of TISCI commands for requesting and releasing IRQs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-01firmware: ti_sci: Add support for RM core opsLokesh Vutla2-0/+212
TISCI provides support for getting the resources(IRQ, RING etc..) assigned to a specific device. These resources can be handled by the client and in turn sends TISCI cmd to configure the resources. It is very important that client should keep track on usage of these resources. Add support for TISCI commands to get resource ranges. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-01firmware: ti_sci: Add support to get TISCI handle using of_phandleGrygorii Strashko1-0/+83
TISCI has been updated to have support for Resource management(like interrupts etc..). And there can be multiple device instances of a resource type in a SoC. So every driver corresponding to a resource type should get a TISCI handle so that it can make TISCI calls. And each DT node corresponding to a device should exist under its corresponding bus node as per the SoC architecture. But existing apis in TISCI library assumes that all TISCI users are child nodes of TISCI. Which is not true in the above case. So introduce (devm_)ti_sci_get_by_phandle() apis that can be used by TISCI users to get TISCI handle using of phandle property. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-29Merge tag 'imx-drivers-5.2' of ↵Olof Johansson4-58/+239
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers change for 5.2: - A series from Aisheng to generalize the SCU powerdomain driver for easier adding new SCU based platforms like imx8qm. - Add a generic i.MX8 SoC driver for reporting SoC and platform information. - Replace explicit polling loop with a call to regmap_read_poll_timeout() for gpcv2 driver to avoid code repetition. - Use devm_platform_ioremap_resource() to simplify gpc/gpcv2 driver code a bit. - Add general IRQ support for imx-scu driver, so that interrupt of device like RTC, thermal and watchdog can be handled. * tag 'imx-drivers-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: Add generic i.MX8 SoC driver firmware: imx: enable imx scu general irq function soc: imx: gpcv2: use devm_platform_ioremap_resource() to simplify code soc: imx: gpc: use devm_platform_ioremap_resource() to simplify code firmware: imx: scu-pd: decouple the SS information from domain names firmware: imx: scu-pd: add specifying the base of domain name index support firmware: imx: scu-pd: use bool to set postfix soc: imx: gpcv2: Make use of regmap_read_poll_timeout() Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29firmware: arm_sdei: Prohibit probing in '_sdei_handler'Xiongfeng Wang1-0/+3
Functions called in '_sdei_handler' are needed to be marked as 'nokprobe'. Because these functions are called in NMI context and neither the arch-code's debug infrastructure nor kprobes core supports this. Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-29Merge tag 'scmi-fixes-5.2' of ↵Olof Johansson1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers ARM SCMI fixes/cleanup for v5.2 1. Fix for of_node reference leak in scmi_mailbox_check by passing NULL argument to of_parse_phandle_with_args instead of dummy argument 2. Cleanup of_match_device->data NULL pointer handling using of_device_get_match_data() helper * tag 'scmi-fixes-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: replace of_match_device->data with of_device_get_match_data() firmware: arm_scmi: fix of_node leak in scmi_mailbox_check Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-17firmware: Move Trusted Foundations supportThierry Reding3-0/+193
Move the Trusted Foundations support out of arch/arm/firmware and into drivers/firmware where most other firmware support implementations are located. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17firmware/psci: add support for SYSTEM_RESET2Sudeep Holla1-1/+23
PSCI v1.1 introduced SYSTEM_RESET2 to allow both architectural resets where the semantics are described by the PSCI specification itself as well as vendor-specific resets. Currently only system warm reset semantics is defined as part of architectural resets by the specification. This patch implements support for SYSTEM_RESET2 by making using of reboot_mode passed by the reboot infrastructure in the kernel. Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-15firmware: xilinx: Add fpga API'sNava kishore Manne1-0/+45
This Patch Adds fpga API's to support the Bitstream loading by using firmware interface. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-12firmware: arm_scmi: replace of_match_device->data with ↵Aditya Pakki1-1/+3
of_device_get_match_data() of_match_device can return NULL if no matching device is found though it's highly unlikely to happen in scmi_probe as it's called only if a valid match is found. However we can use of_device_get_match_data() instead of of_match_device()->data to handle NULL pointer checks and return -EINVAL in such a scenario. Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-04-12firmware: arm_scmi: fix of_node leak in scmi_mailbox_checkSteven Price1-3/+1
of_parse_phandle_with_args() requires the caller to call of_node_put() on the returned args->np pointer. Otherwise the reference count will remain incremented. However, in this case, since we don't actually use the returned pointer, we can simply pass in NULL. Fixes: aa4f886f3893f ("firmware: arm_scmi: add basic driver infrastructure for SCMI") Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-04-12drivers: firmware: psci: Announce support for OS initiated suspend modeUlf Hansson1-1/+20
PSCI firmware v1.0+, supports two different modes for CPU_SUSPEND. The Platform Coordinated mode, which is the default and mandatory mode, while support for the OS initiated (OSI) mode is optional. In some cases it's interesting for the user/developer to know if the OSI mode is supported by the PSCI FW, so print a message to the log if that is the case. Co-developed-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-12drivers: firmware: psci: Simplify error path of psci_dt_init()Ulf Hansson1-13/+10
Instead of having each PSCI init function taking care of the of_node_put(), deal with that from psci_dt_init(), as this enables a bit simpler error path for each PSCI init function. Co-developed-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-12drivers: firmware: psci: Split psci_dt_cpu_init_idle()Ulf Hansson1-19/+23
Split the psci_dt_cpu_init_idle() function into two functions. This makes the code clearer and provides better re-usability. Co-developed-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-12drivers: firmware: psci: Move psci to separate directoryUlf Hansson6-16/+19
Some following changes extends the PSCI driver with some additional files. Avoid to continue cluttering the toplevel firmware directory and first move the PSCI files into a PSCI sub-directory. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-11firmware: imx: enable imx scu general irq functionAnson Huang3-1/+175
The System Controller Firmware (SCFW) controls RTC, thermal and WDOG etc., these resources' interrupt function are managed by SCU. When any IRQ pending, SCU will notify Linux via MU general interrupt channel #3, and Linux kernel needs to call SCU APIs to get IRQ status and notify each module to handle the interrupt. Since there is no data transmission for SCU IRQ notification, so doorbell mode is used for this MU channel, and SCU driver will use notifier mechanism to broadcast to every module which registers the SCU block notifier. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-09efi/arm/arm64: Makefile: Replace -pg with CC_FLAGS_FTRACETorsten Duwe1-3/+3
In preparation for arm64 supporting ftrace built on other compiler options, let's have Makefiles remove the $(CC_FLAGS_FTRACE) flags, whatever these maybe, rather than assuming '-pg'. While at it, fix arm32 as well. There should be no functional change as a result of this patch. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Torsten Duwe <duwe@suse.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-09ACPICA: Rename nameseg length macro/define for clarityBob Moore1-1/+1
ACPICA commit 24870bd9e73d71e2a1ff0a1e94519f8f8409e57d ACPI_NAME_SIZE changed to ACPI_NAMESEG_SIZE This clarifies that this is the length of an individual nameseg, not the length of a generic namestring/namepath. Improves understanding of the code. Link: https://github.com/acpica/acpica/commit/24870bd9 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-29efi/libstub/arm: Omit unneeded stripping of ksymtab/kcrctab sectionsArd Biesheuvel1-2/+1
Commit f922c4abdf764 ("module: allow symbol exports to be disabled") introduced a way to inhibit generation of kcrctab/ksymtab sections when building ordinary kernel code to be used in a different execution context (decompressor, EFI stub, etc) That means we no longer have to strip those sections explicitly when building the EFI libstub objects, so drop this from the Makefile. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190328193429.21373-6-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>