summaryrefslogtreecommitdiff
path: root/drivers/firmware
AgeCommit message (Collapse)AuthorFilesLines
2021-07-17Merge tag 'scmi-fixes-5.14' of ↵Arnd Bergmann4-12/+20
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes ARM SCMI fixes for v5.14 A small set of fixes: - adding check for presence of probe while registering the driver to prevent NULL pointer access - dropping the duplicate check as the driver core already takes care of it - fix for possible scmi_linux_errmap buffer overflow - fix to avoid sensor message structure padding - fix the range check for the maximum number of pending SCMI messages - fix for various kernel-doc warnings * tag 'scmi-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fix range check for the maximum number of pending messages firmware: arm_scmi: Avoid padding in sensor message structure firmware: arm_scmi: Fix kernel doc warnings about return values firmware: arm_scpi: Fix kernel doc warnings firmware: arm_scmi: Fix kernel doc warnings firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow firmware: arm_scmi: Ensure drivers provide a probe function firmware: arm_scmi: Simplify device probe function on the bus Link: https://lore.kernel.org/r/20210714165831.2617437-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-13firmware: arm_scmi: Fix range check for the maximum number of pending messagesCristian Marussi1-2/+3
SCMI message headers carry a sequence number and such field is sized to allow for MSG_TOKEN_MAX distinct numbers; moreover zero is not really an acceptable maximum number of pending in-flight messages. Fix accordingly the checks performed on the value exported by transports in scmi_desc.max_msg Link: https://lore.kernel.org/r/20210712141833.6628-3-cristian.marussi@arm.com Reported-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> [sudeep.holla: updated the patch title and error message] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-13firmware: arm_scmi: Avoid padding in sensor message structureCristian Marussi1-2/+4
scmi_resp_sensor_reading_complete structure is meant to represent an SCMI asynchronous reading complete message. The readings field with a 64bit type forces padding and breaks reads in scmi_sensor_reading_get. Split it in two adjacent 32bit readings_low/high subfields to avoid the padding within the structure. Alternatively we could to mark the structure packed. Link: https://lore.kernel.org/r/20210628170042.34105-1-cristian.marussi@arm.com Fixes: e2083d3673916 ("firmware: arm_scmi: Add SCMI v3.0 sensors timestamped reads") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-13firmware: arm_scmi: Fix kernel doc warnings about return valuesCristian Marussi2-0/+6
Kernel doc validation script still complains about the following: |No description found for return value of 'scmi_get_protocol_device' |No description found for return value of 'scmi_devm_notifier_register' |No description found for return value of 'scmi_devm_notifier_unregister' Fix adding missing Return kernel-doc statements. Link: https://lore.kernel.org/r/20210712143504.33541-1-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-12firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflowSudeep Holla1-2/+4
The ffa_linux_errmap buffer access index is supposed to range from 0-8 but it ranges from 1-9 instead. It reads one element out of bounds. It also changes the success into -EINVAL though ffa_to_linux_errno is never used in case of success, it is expected to work for success case too. It is slightly confusing code as the negative of the error code is used as index to the buffer. Fix it by negating it at the start and make it more readable. Link: https://lore.kernel.org/r/20210707134739.1869481-1-sudeep.holla@arm.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-12firmware: arm_ffa: Fix the comment styleSudeep Holla1-1/+1
clang produces the following warning: drivers/firmware/arm_ffa/driver.c:123: warning: expecting prototype for FF(). Prototype was for FFA_PAGE_SIZE() instead This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Fix the same by removing the kernel-doc style comment here. Link: https://lore.kernel.org/r/20210622162202.3485866-1-sudeep.holla@arm.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-12firmware: arm_ffa: Simplify probe functionUwe Kleine-König1-3/+0
When the driver core calls the probe callback it already checked that the devices match, so there is no need to call the match callback again. Link: https://lore.kernel.org/r/20210621201652.127611-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-12firmware: arm_ffa: Ensure drivers provide a probe functionUwe Kleine-König1-0/+3
The bus probe callback calls the driver callback without further checking. Better be safe than sorry and refuse registration of a driver without a probe function to prevent a NULL pointer exception. Link: https://lore.kernel.org/r/20210621201652.127611-1-u.kleine-koenig@pengutronix.de Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-12firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflowSudeep Holla1-3/+4
The scmi_linux_errmap buffer access index is supposed to depend on the array size to prevent element out of bounds access. It uses SCMI_ERR_MAX to check bounds but that can mismatch with the array size. It also changes the success into -EIO though scmi_linux_errmap is never used in case of success, it is expected to work for success case too. It is slightly confusing code as the negative of the error code is used as index to the buffer. Fix it by negating it at the start and make it more readable. Link: https://lore.kernel.org/r/20210707135028.1869642-1-sudeep.holla@arm.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-12firmware: arm_scmi: Ensure drivers provide a probe functionSudeep Holla1-0/+3
The bus probe callback calls the driver callback without further checking. Better be safe than sorry and refuse registration of a driver without a probe function to prevent a NULL pointer exception. Link: https://lore.kernel.org/r/20210624095059.4010157-2-sudeep.holla@arm.com Fixes: 933c504424a2 ("firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices") Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-12firmware: arm_scmi: Simplify device probe function on the busSudeep Holla1-5/+0
When the driver core calls the probe callback it already checked that the devices match, so there is no need to call the match callback again. Link: https://lore.kernel.org/r/20210624095059.4010157-1-sudeep.holla@arm.com Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-10Merge tag 'arm-drivers-5.14' of ↵Linus Torvalds20-22/+1157
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Olof Johansson: - Reset controllers: Adding support for Microchip Sparx5 Switch. - Memory controllers: ARM Primecell PL35x SMC memory controller driver cleanups and improvements. - i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN. - Rockchip: RK3568 power domains support + DT binding updates, cleanups. - Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details, including support for MSM8226, MDM9607, SM6125 and SC8180X. - ARM FFA driver: "Firmware Framework for ARMv8-A", defining management interfaces and communication (including bus model) between partitions both in Normal and Secure Worlds. - Tegra Memory controller changes, including major rework to deal with identity mappings at boot and integration with ARM SMMU pieces. * tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits) firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string firmware: turris-mox-rwtm: show message about HWRNG registration firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng firmware: turris-mox-rwtm: report failures better firmware: turris-mox-rwtm: fix reply status decoding function soc: imx: gpcv2: add support for i.MX8MN power domains dt-bindings: add defines for i.MX8MN power domains firmware: tegra: bpmp: Fix Tegra234-only builds iommu/arm-smmu: Use Tegra implementation on Tegra186 iommu/arm-smmu: tegra: Implement SID override programming iommu/arm-smmu: tegra: Detect number of instances at runtime dt-bindings: arm-smmu: Add Tegra186 compatible string firmware: qcom_scm: Add MDM9607 compatible soc: qcom: rpmpd: Add MDM9607 RPM Power Domains soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml memory: emif: remove unused frequency and voltage notifiers memory: fsl_ifc: fix leak of private memory on probe failure memory: fsl_ifc: fix leak of IO mapping on probe failure ...
2021-07-06Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-2/+10
Pull ARM development updates from Russell King: - Make it clear __swp_entry_to_pte() uses PTE_TYPE_FAULT - Updates for setting vmalloc size via command line to resolve an issue with the 8MiB hole not properly being accounted for, and clean up the code. - ftrace support for module PLTs - Spelling fixes - kbuild updates for removing generated files and pattern rules for generating files - Clang/llvm updates - Change the way the kernel is mapped, placing it in vmalloc space instead. - Remove arm_pm_restart from arm and aarch64. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (29 commits) ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE ARM: 9097/1: mmu: Declare section start/end correctly ARM: 9096/1: Remove arm_pm_restart() ARM: 9095/1: ARM64: Remove arm_pm_restart() ARM: 9094/1: Register with kernel restart handler ARM: 9093/1: drivers: firmwapsci: Register with kernel restart handler ARM: 9092/1: xen: Register with kernel restart handler ARM: 9091/1: Revert "mm: qsd8x50: Fix incorrect permission faults" ARM: 9090/1: Map the lowmem and kernel separately ARM: 9089/1: Define kernel physical section start and end ARM: 9088/1: Split KERNEL_OFFSET from PAGE_OFFSET ARM: 9087/1: kprobes: test-thumb: fix for LLVM_IAS=1 ARM: 9086/1: syscalls: use pattern rules to generate syscall headers ARM: 9085/1: remove unneeded abi parameter to syscallnr.sh ARM: 9084/1: simplify the build rule of mach-types.h ARM: 9083/1: uncompress: atags_to_fdt: Spelling s/REturn/Return/ ARM: 9082/1: [v2] mark prepare_page_table as __init ARM: 9079/1: ftrace: Add MODULE_PLTS support ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link() ARM: 9077/1: PLT: Move struct plt_entries definition to header ...
2021-07-05Merge tag 'char-misc-5.14-rc1' of ↵Linus Torvalds1-7/+15
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char / misc and other driver subsystem updates for 5.14-rc1. Included in here are: - habanalabs driver updates - fsl-mc driver updates - comedi driver updates - fpga driver updates - extcon driver updates - interconnect driver updates - mei driver updates - nvmem driver updates - phy driver updates - pnp driver updates - soundwire driver updates - lots of other tiny driver updates for char and misc drivers This is looking more and more like the "various driver subsystems mushed together" tree... All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) mcb: Use DEFINE_RES_MEM() helper macro and fix the end address PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls bus: mhi: Wait for M2 state during system resume bus: mhi: core: Fix power down latency intel_th: Wait until port is in reset before programming it intel_th: msu: Make contiguous buffers uncached intel_th: Remove an unused exit point from intel_th_remove() stm class: Spelling fix nitro_enclaves: Set Bus Master for the NE PCI device misc: ibmasm: Modify matricies to matrices misc: vmw_vmci: return the correct errno code siox: Simplify error handling via dev_err_probe() fpga: machxo2-spi: Address warning about unused variable lkdtm/heap: Add init_on_alloc tests selftests/lkdtm: Enable various testable CONFIGs lkdtm: Add CONFIG hints in errors where possible lkdtm: Enable DOUBLE_FAULT on all architectures lkdtm/heap: Add vmalloc linear overflow test lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE ...
2021-07-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+1
Merge more updates from Andrew Morton: "190 patches. Subsystems affected by this patch series: mm (hugetlb, userfaultfd, vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock, migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap, zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc, core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs, signals, exec, kcov, selftests, compress/decompress, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits) ipc/util.c: use binary search for max_idx ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock ipc: use kmalloc for msg_queue and shmid_kernel ipc sem: use kvmalloc for sem_undo allocation lib/decompressors: remove set but not used variabled 'level' selftests/vm/pkeys: exercise x86 XSAVE init state selftests/vm/pkeys: refill shadow register after implicit kernel write selftests/vm/pkeys: handle negative sys_pkey_alloc() return code selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random kcov: add __no_sanitize_coverage to fix noinstr for all architectures exec: remove checks in __register_bimfmt() x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned hfsplus: report create_date to kstat.btime hfsplus: remove unnecessary oom message nilfs2: remove redundant continue statement in a while-loop kprobes: remove duplicated strong free_insn_page in x86 and s390 init: print out unknown kernel parameters checkpatch: do not complain about positive return values starting with EPOLL checkpatch: improve the indented label test checkpatch: scripts/spdxcheck.py now requires python3 ...
2021-07-01kernel.h: split out panic and oops helpersAndy Shevchenko1-0/+1
kernel.h is being used as a dump for all kinds of stuff for a long time. Here is the attempt to start cleaning it up by splitting out panic and oops helpers. There are several purposes of doing this: - dropping dependency in bug.h - dropping a loop by moving out panic_notifier.h - unload kernel.h from something which has its own domain At the same time convert users tree-wide to use new headers, although for the time being include new header back to kernel.h to avoid twisted indirected includes for existing users. [akpm@linux-foundation.org: thread_info.h needs limits.h] [andriy.shevchenko@linux.intel.com: ia64 fix] Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01Merge tag 'clang-features-v5.14-rc1' of ↵Linus Torvalds1-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull clang feature updates from Kees Cook: - Add CC_HAS_NO_PROFILE_FN_ATTR in preparation for PGO support in the face of the noinstr attribute, paving the way for PGO and fixing GCOV. (Nick Desaulniers) - x86_64 LTO coverage is expanded to 32-bit x86. (Nathan Chancellor) - Small fixes to CFI. (Mark Rutland, Nathan Chancellor) * tag 'clang-features-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: qemu_fw_cfg: Make fw_cfg_rev_attr a proper kobj_attribute Kconfig: Introduce ARCH_WANTS_NO_INSTR and CC_HAS_NO_PROFILE_FN_ATTR compiler_attributes.h: cleanups for GCC 4.9+ compiler_attributes.h: define __no_profile, add to noinstr x86, lto: Enable Clang LTO for 32-bit as well CFI: Move function_nocfi() into compiler.h MAINTAINERS: Add Clang CFI section
2021-06-29qemu_fw_cfg: Make fw_cfg_rev_attr a proper kobj_attributeNathan Chancellor1-5/+3
fw_cfg_showrev() is called by an indirect call in kobj_attr_show(), which violates clang's CFI checking because fw_cfg_showrev()'s second parameter is 'struct attribute', whereas the ->show() member of 'struct kobj_structure' expects the second parameter to be of type 'struct kobj_attribute'. $ cat /sys/firmware/qemu_fw_cfg/rev 3 $ dmesg | grep "CFI failure" [ 26.016832] CFI failure (target: fw_cfg_showrev+0x0/0x8): Fix this by converting fw_cfg_rev_attr to 'struct kobj_attribute' where this would have been caught automatically by the incompatible pointer types compiler warning. Update fw_cfg_showrev() accordingly. Fixes: 75f3e8e47f38 ("firmware: introduce sysfs driver for QEMU's fw_cfg device") Link: https://github.com/ClangBuiltLinux/linux/issues/1299 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210211194258.4137998-1-nathan@kernel.org
2021-06-29Merge tag 'arm64-upstream' of ↵Linus Torvalds2-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "There's a reasonable amount here and the juicy details are all below. It's worth noting that the MTE/KASAN changes strayed outside of our usual directories due to core mm changes and some associated changes to some other architectures; Andrew asked for us to carry these [1] rather that take them via the -mm tree. Summary: - Optimise SVE switching for CPUs with 128-bit implementations. - Fix output format from SVE selftest. - Add support for versions v1.2 and 1.3 of the SMC calling convention. - Allow Pointer Authentication to be configured independently for kernel and userspace. - PMU driver cleanups for managing IRQ affinity and exposing event attributes via sysfs. - KASAN optimisations for both hardware tagging (MTE) and out-of-line software tagging implementations. - Relax frame record alignment requirements to facilitate 8-byte alignment with KASAN and Clang. - Cleanup of page-table definitions and removal of unused memory types. - Reduction of ARCH_DMA_MINALIGN back to 64 bytes. - Refactoring of our instruction decoding routines and addition of some missing encodings. - Move entry code moved into C and hardened against harmful compiler instrumentation. - Update booting requirements for the FEAT_HCX feature, added to v8.7 of the architecture. - Fix resume from idle when pNMI is being used. - Additional CPU sanity checks for MTE and preparatory changes for systems where not all of the CPUs support 32-bit EL0. - Update our kernel string routines to the latest Cortex Strings implementation. - Big cleanup of our cache maintenance routines, which were confusingly named and inconsistent in their implementations. - Tweak linker flags so that GDB can understand vmlinux when using RELR relocations. - Boot path cleanups to enable early initialisation of per-cpu operations needed by KCSAN. - Non-critical fixes and miscellaneous cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (150 commits) arm64: tlb: fix the TTL value of tlb_get_level arm64: Restrict undef hook for cpufeature registers arm64/mm: Rename ARM64_SWAPPER_USES_SECTION_MAPS arm64: insn: avoid circular include dependency arm64: smp: Bump debugging information print down to KERN_DEBUG drivers/perf: fix the missed ida_simple_remove() in ddr_perf_probe() perf/arm-cmn: Fix invalid pointer when access dtc object sharing the same IRQ number arm64: suspend: Use cpuidle context helpers in cpu_suspend() PSCI: Use cpuidle context helpers in psci_cpu_suspend_enter() arm64: Convert cpu_do_idle() to using cpuidle context helpers arm64: Add cpuidle context save/restore helpers arm64: head: fix code comments in set_cpu_boot_mode_flag arm64: mm: drop unused __pa(__idmap_text_start) arm64: mm: fix the count comments in compute_indices arm64/mm: Fix ttbr0 values stored in struct thread_info for software-pan arm64: mm: Pass original fault address to handle_mm_fault() arm64/mm: Drop SECTION_[SHIFT|SIZE|MASK] arm64/mm: Use CONT_PMD_SHIFT for ARM64_MEMSTART_SHIFT arm64/mm: Drop SWAPPER_INIT_MAP_SIZE arm64: Conditionally configure PTR_AUTH key of the kernel. ...
2021-06-24Merge branch 'for-next/smccc' into for-next/coreWill Deacon1-0/+4
Add support for versions v1.2 and 1.3 of the SMC calling convention. * for-next/smccc: arm64: smccc: Support SMCCC v1.3 SVE register saving hint arm64: smccc: Add support for SMCCCv1.2 extended input/output registers
2021-06-24Merge tag 'mvebu-drivers-5.14-1' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/drivers mvebu drivers for 5.14 (part 1) Make the turris mox rwtm firmware more generic for Armada 3700 SoCs * tag 'mvebu-drivers-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string Link: https://lore.kernel.org/r/87bl802a2d.fsf@BL-laptop Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-24Merge tag 'mvebu-fixes-5.13-1' of ↵Olof Johansson1-8/+47
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/drivers mvebu fixes for 5.13 (part 1) Few fixes for the Turris Mox rWTM firmware found on the Armada 3700 SoCs. * tag 'mvebu-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: firmware: turris-mox-rwtm: show message about HWRNG registration firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng firmware: turris-mox-rwtm: report failures better firmware: turris-mox-rwtm: fix reply status decoding function Link: https://lore.kernel.org/r/87eecx0w6s.fsf@BL-laptop Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-17PSCI: Use cpuidle context helpers in psci_cpu_suspend_enter()Marc Zyngier1-2/+7
The PSCI CPU suspend code isn't aware of the PMR vs DAIF game, resulting in a system that locks up if entering CPU suspend with GICv3 pNMI enabled. To save the day, teach the suspend code about our new cpuidle context helpers, which will do everything that's required just like the usual WFI cpuidle code. This fixes my Altra system, which would otherwise lock-up at boot time when booted with irqchip.gicv3_pseudo_nmi=1. Tested-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20210615111227.2454465-4-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-06-17firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible ↵Pali Rohár1-0/+1
string Add more generic compatible string 'marvell,armada-3700-rwtm-firmware' for this driver, since it can also be used on other Armada 3720 devices. Current compatible string 'cznic,turris-mox-rwtm' is kept for backward compatibility. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-06-17firmware: turris-mox-rwtm: show message about HWRNG registrationPali Rohár1-0/+2
Currently it is hard to determinate if on Armada 3720 device is HWRNG by running kernel accessible or not. So print information message into dmesg when HWRNG is available and registration was successful. Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-06-17firmware: turris-mox-rwtm: fail probing when firmware does not support hwrngPali Rohár1-0/+28
When Marvell's rWTM firmware, which does not support the GET_RANDOM command, is used, kernel prints an error message hwrng: no data available every 10 seconds. Fail probing of this driver if the rWTM firmware does not support the GET_RANDOM command. Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-06-17firmware: turris-mox-rwtm: report failures betterMarek Behún1-6/+12
Report a notice level message if a command is not supported by the rWTM firmware. This should not be an error, merely a notice, because the firmware can be used on boards that do not have manufacturing information burned. Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-06-17firmware: turris-mox-rwtm: fix reply status decoding functionMarek Behún1-2/+5
The status decoding function mox_get_status() currently contains an incorrect check: if the error status is not MBOX_STS_SUCCESS, it always returns -EIO, so the comparison to MBOX_STS_FAIL is never executed and we don't get the actual error code sent by the firmware. Fix this. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-06-15Merge tag 'arm-ffa-5.14' of ↵Olof Johansson8-0/+1040
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers Arm Firmware Framework for ARMv8-A(FFA) interface driver The Arm FFA specification describes a software architecture to leverages the virtualization extension to isolate software images provided by an ecosystem of vendors from each other and describes interfaces that standardize communication between the various software images including communication between images in the Secure world and Normal world. Any Hypervisor could use the FFA interfaces to enable communication between VMs it manages. The Hypervisor a.k.a Partition managers in FFA terminology can assign system resources(Memory regions, Devices, CPU cycles) to the partitions and manage isolation amongst them. This is the initial and minimal support for the FFA interface to enable communication between secure partitions and the normal world OS. * tag 'arm-ffa-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_ffa: Add support for MEM_* interfaces firmware: arm_ffa: Setup in-kernel users of FFA partitions firmware: arm_ffa: Add support for SMCCC as transport to FFA driver firmware: arm_ffa: Add initial Arm FFA driver support firmware: arm_ffa: Add initial FFA bus support for device enumeration arm64: smccc: Add support for SMCCCv1.2 extended input/output registers Link: https://lore.kernel.org/r/20210601095838.GA838783@bogus Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15Merge tag 'tegra-for-5.14-firmware' of ↵Olof Johansson4-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers firmware: tegra: Changes for v5.14-rc1 These changes contain two minor fixes for the Tegra BPMP driver. * tag 'tegra-for-5.14-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: firmware: tegra: bpmp: Fix Tegra234-only builds firmware: tegra: Fix error return code in tegra210_bpmp_init() Link: https://lore.kernel.org/r/20210611164437.3568059-3-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15Merge tag 'qcom-drivers-for-5.14' of ↵Olof Johansson1-0/+3
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.14 In addition to fixing a kerneldoc issue in the qcom-ebi2 driver this populates socinfo with a range of platforms and PMICs and extends a few of the Qualcomm drivers bits of support for MSM8226, MDM9607, SM6125 and SC8180X. * tag 'qcom-drivers-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: firmware: qcom_scm: Add MDM9607 compatible soc: qcom: rpmpd: Add MDM9607 RPM Power Domains soc: qcom: smd-rpm: Add MSM8226 compatible dt-bindings: soc: qcom: smd-rpm: Add MSM8226 compatible soc: qcom: socinfo: import PMIC IDs from pmic-spmi bus: qcom-ebi2: Fix incorrect documentation for '{slow,fast}_cfg' soc: qcom: socinfo: Add more IDs soc: qcom: rpmhpd: Add SC8180X dt-bindings: power: rpmpd: Add SC8180X to rpmpd binding dt-bindings: soc: qcom: smd-rpm: Document SM6125 compatible soc: qcom: smd-rpm: Add SM6125 compatible soc: qcom: socinfo: Add remaining IPQ6018 family ID-s soc: qcom: socinfo: Add missing SoC ID for SM6125 Link: https://lore.kernel.org/r/20210614223727.393159-1-bjorn.andersson@linaro.org Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-14Merge tag 'v5.13-rc6' into char-misc-nextGreg Kroah-Hartman4-9/+5
We need the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-13ARM: 9093/1: drivers: firmwapsci: Register with kernel restart handlerGuenter Roeck1-2/+10
Register with kernel restart handler instead of setting arm_pm_restart directly. This enables support for replacing the PSCI restart handler with a different handler if necessary for a specific board. Select a priority of 129 to indicate a higher than default priority, but keep it as low as possible since PSCI reset is known to fail on some boards. Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-12Merge tag 'scmi-updates-5.14' of ↵Olof Johansson7-11/+60
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers ARM SCMI updates for v5.14 - Support for SCMI clocks from the SCMI power domains - Addition of checks for correct compatibles for shmem devicetree nodes that were found missing in the process of YAML schema conversion - Kconfig and associated build fix found when optee transport are being worked on - Couple of fixes and cleanups found as with work-in-progress virtio transport support The new transports(optee and virtio) themselves are still being worked on with ongoing reviews, they are not part of this yet * tag 'scmi-updates-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Avoid multiple initialisations of hdr->protocol_id firmware: arm_scmi: Move reinit_completion from scmi_xfer_get to do_xfer firmware: arm_scmi: Add delayed response status check firmware: arm_scmi: Add compatibility checks for shmem node firmware: arm_scpi: Add compatibility checks for shmem node firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected firmware: arm_scmi: Reset Rx buffer to max size during async commands firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig firmware: arm_scmi: Add clock management to the SCMI power domain Link: https://lore.kernel.org/r/20210611075722.2813550-1-sudeep.holla@arm.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-11firmware: tegra: bpmp: Fix Tegra234-only buildsThierry Reding3-2/+5
The tegra186_bpmp_ops symbol is used on Tegra234, so make sure it's available. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-10firmware: qcom_scm: Add MDM9607 compatibleKonrad Dybcio1-0/+3
Add a compatible for MDM9607. It uses the "legacy" calling convention. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013058.54299-1-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-08firmware: arm_scmi: Avoid multiple initialisations of hdr->protocol_idSudeep Holla1-6/+2
Since the hdr->protocol_id is set from the scmi_protocol_instance handle just before the transfer, there is no need to initialise the same in scmi_xfer_get_init. Remove the unnecessary initialisations. Link: https://lore.kernel.org/r/20210608140140.2042257-1-sudeep.holla@arm.com Tested-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-06-08firmware: arm_scmi: Move reinit_completion from scmi_xfer_get to do_xferCristian Marussi1-1/+1
Re-using timed out xfers in a loop can lead to issue if completion was not properly reinitialized. Move reinit_completion from scmi_xfer_get to do_xfer to avoid the issue. Link: https://lore.kernel.org/r/20210606221232.33768-3-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> [sudeep.holla: moved reinit_completion instead of adding another one] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-06-08firmware: arm_scmi: Add delayed response status checkCristian Marussi1-2/+6
A successfully received delayed response could anyway report a failure at the protocol layer in the message status field. Add a check also for this error condition. Link: https://lore.kernel.org/r/20210608103056.3388-1-cristian.marussi@arm.com Fixes: 58ecdf03dbb9 ("firmware: arm_scmi: Add support for asynchronous commands and delayed response") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-06-08firmware: arm_scmi: Add compatibility checks for shmem nodeSudeep Holla2-0/+6
The shared memory node used for communication between the firmware and the OS should be compatible with "arm,scmi-shmem". Add the check for the same while parsing the node before fetching the memory regions. Link: https://lore.kernel.org/r/20210602073851.1005607-2-sudeep.holla@arm.com Cc: Rob Herring <robh+dt@kernel.org> Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jim Quinlan <jim2101024@gmail.com> Cc: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Tested-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-06-08arm64: smccc: Support SMCCC v1.3 SVE register saving hintMark Brown1-0/+4
SMCCC v1.2 requires that all SVE state be preserved over SMC calls which introduces substantial overhead in the common case where there is no SVE state in the registers. To avoid this SMCCC v1.3 introduces a flag which allows the caller to say that there is no state that needs to be preserved in the registers. Make use of this flag, setting it if the SMCCC version indicates support for it and the TIF_ flags indicate that there is no live SVE state in the registers, this avoids placing any constraints on when SMCCC calls can be done or triggering extra saving and reloading of SVE register state in the kernel. This would be straightforward enough except for the rather entertaining inline assembly we use to do SMCCC v1.1 calls to allow us to take advantage of the limited number of registers it clobbers. Deal with this by having a function which we call immediately before issuing the SMCCC call to make our checks and set the flag. Using alternatives the overhead if SVE is supported but not detected at runtime can be reduced to a single NOP. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210603184118.15090-1-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-06-03firmware: arm_scpi: Add compatibility checks for shmem nodeSudeep Holla1-0/+11
The shared memory node used for communication between the firmware and the OS should be compatible with one of the following: - amlogic,meson-gxbb-scp-shmem - amlogic,meson-axg-scp-shmem - arm,juno-scp-shmem - arm,scp-shmem Add the check for the same while parsing the node before fetching the memory regions. Link: https://lore.kernel.org/r/20210602073851.1005607-1-sudeep.holla@arm.com Cc: Rob Herring <robh+dt@kernel.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Tested-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-06-03firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selectedSudeep Holla1-0/+2
0day CI kernel test robot reported following build error with randconfig aarch64-linux-ld: drivers/firmware/arm_scmi/driver.o:(.rodata+0x1e0): undefined reference to `scmi_mailbox_desc' Fix the error by adding CONFIG_MAILBOX dependency for scmi_mailbox_desc. Link: https://lore.kernel.org/r/20210603072631.1660963-1-sudeep.holla@arm.com Cc: Etienne Carriere <etienne.carriere@linaro.org> Cc: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Tested-by: Cristian Marussi <cristian.marussi@arm.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-06-02firmware: arm_scmi: Reset Rx buffer to max size during async commandsCristian Marussi1-0/+4
During an async commands execution the Rx buffer length is at first set to max_msg_sz when the synchronous part of the command is first sent. However once the synchronous part completes the transport layer waits for the delayed response which will be processed using the same xfer descriptor initially allocated. Since synchronous response received at the end of the xfer will shrink the Rx buffer length to the effective payload response length, it needs to be reset again. Raise the Rx buffer length again to max_msg_sz before fetching the delayed response to ensure full response is read correctly from the shared memory. Link: https://lore.kernel.org/r/20210601102421.26581-2-cristian.marussi@arm.com Fixes: 58ecdf03dbb9 ("firmware: arm_scmi: Add support for asynchronous commands and delayed response") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> [sudeep.holla: moved reset to scmi_handle_response as it could race with do_xfer_with_response] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-06-02firmware: arm_scmi: Add SMCCC discovery dependency in KconfigEtienne Carriere2-2/+2
ARM_SCMI_PROTOCOL depends on either MAILBOX or HAVE_ARM_SMCCC_DISCOVERY, not MAILBOX alone. Fix the depedency in Kconfig file and driver to reflect the same. Link: https://lore.kernel.org/r/20210521134055.24271-1-etienne.carriere@linaro.org Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> [sudeep.holla: Minor tweaks to subject and change log] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-06-01firmware: tegra: Fix error return code in tegra210_bpmp_init()Zhen Lei1-1/+1
When call irq_get_irq_data() to get the IRQ's irq_data failed, an appropriate error code -ENOENT should be returned. However, we directly return 'err', which records the IRQ number instead of the error code. Fixes: 139251fc2208 ("firmware: tegra: add bpmp driver for Tegra210") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31Merge 5.13-rc4 into char-misc-nextGreg Kroah-Hartman2-3/+3
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27firmware: stratix10-svc: Fix a resource leak in an error handling pathChristophe JAILLET1-7/+15
If an error occurs after a successful 'kfifo_alloc()' call, it must be undone by a corresponding 'kfifo_free()' call, as already done in the remove function. While at it, move the 'platform_device_put()' call to this new error handling path and explicitly return 0 in the success path. Fixes: b5dc75c915cd ("firmware: stratix10-svc: extend svc to support new RSU features") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/0ca3f3ab139c53e846804455a1e7599ee8ae896a.1621621271.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27firmware: arm_ffa: Add support for MEM_* interfacesSudeep Holla1-0/+199
Most of the MEM_* APIs share the same parameters, so they can be generalised. Currently only MEM_SHARE is implemented and the user space interface for that is not added yet. Link: https://lore.kernel.org/r/20210521151033.181846-6-sudeep.holla@arm.com Tested-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-05-27firmware: arm_ffa: Setup in-kernel users of FFA partitionsSudeep Holla3-0/+233
Parse the FFA nodes from the device-tree and register all the partitions whose services will be used in the kernel. In order to also enable in-kernel users of FFA interface, let us add simple set of operations for such devices. The in-kernel users are registered without the character device interface. Link: https://lore.kernel.org/r/20210521151033.181846-5-sudeep.holla@arm.com Tested-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-29 00:53:49 +0300