| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main change this time was the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other
firmware drivers.
On the soc driver side, the updates are mostly cleanups across a
number of Arm platforms. On driver for loongarch adds power management
for DT based systems, another driver is for HiSilicon's Arm server
chips with their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform"
* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
bus: fsl-mc: Use common ranges functions
soc: kunpeng_hccs: fix some sparse warnings about incorrect type
soc: loongson2_pm: add power management support
soc: dt-bindings: add loongson-2 pm
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
bus: ti-sysc: Fix cast to enum warning
soc: kunpeng_hccs: add MAILBOX dependency
MAINTAINERS: remove OXNAS entry
dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
soc: kunpeng_hccs: fix size_t format string
soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
dt-bindings: firmware: qcom: scm: Updating VMID list
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull ARM SoC generic power domain driver updates from Ulf Hansson:
"This adds a new subsystem for generic power domain providers in
drivers/genpd and starts moving some of the corresponding code in
there.
We have currently ~60 users of the genpd provider interface, which are
sprinkled across various subsystems. To release some burden from the
soc maintainers (Arnd Bergmann, etc) in particular, but also to gain a
better overall view of what goes on in the area, I will help out with
maintenance"
[ I find the "genpd" name singularly uninformative, so we'll probably
end up moving this driver subsystem somewhere else, but that's still
being discussed - Linus ]
* tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (30 commits)
genpd: ti: Use for_each_node_with_property() simplify code logic
genpd: Explicitly include correct DT includes
genpd: imx: scu-pd: initialize is_off according to HW state
genpd: imx: scu-pd: Suppress bind attrs
genpd: imx: scu-pd: do not power off console if no_console_suspend
genpd: imx: scu-pd: add more PDs
genpd: imx: scu-pd: enlarge PD range
genpd: imx: relocate scu-pd under genpd
MAINTAINERS: adjust file entry in STARFIVE JH71XX PMU CONTROLLER DRIVER
genpd: Makefile: build imx
genpd: move owl-sps-helper.c from drivers/soc
soc: starfive: remove stale Makefile entry
ARM: ux500: Move power-domain driver to the genpd dir
ARM: ux500: Convert power-domain code into a regular platform driver
soc: xilinx: Move power-domain driver to the genpd dir
soc: ti: Mover power-domain drivers to the genpd dir
soc: tegra: Move powergate-bpmp driver to the genpd dir
soc: sunxi: Move power-domain driver to the genpd dir
soc: starfive: Move the power-domain driver to the genpd dir
soc: samsung: Move power-domain driver to the genpd dir
...
|
|
Let's convert to use for_each_node_with_property() to iterate through the
DT nodes, as to simplify the code logic a bit. No intended functional
change.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
into soc/drivers
This pull request contains Broadcom SoCs drivers changes for 6.6, please
pull the following:
- Rob updates the Broadcom SoC drivers to use the correct DT includes
* tag 'arm-soc/for-6.6/drivers' of https://github.com/Broadcom/stblinux:
soc: bcm: Explicitly include correct DT includes
Link: https://lore.kernel.org/r/20230818164539.2871539-3-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.6
Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.
An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.
The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.
In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.
The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.
The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.
PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.
An off-by-one string length check is corrected in the QMI encoder
decoder library.
The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.
The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.
The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.
Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().
The list of VMIDs defined for the SCM assign memory interface is
extended.
* tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (52 commits)
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
dt-bindings: firmware: qcom: scm: Updating VMID list
dt-bindings: qcom: Update RPMHPD entries for some SoCs
soc: qcom: qmi_encdec: Restrict string length in decode
soc: qcom: smem: Fix incompatible types in comparison
soc: qcom: ocmem: add missing clk_disable_unprepare() in ocmem_dev_probe()
soc: qcom: socinfo: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: drop the IPQ5019 SoC ID
soc: qcom: socinfo: drop the IPQ5019 SoC ID
soc: qcom: socinfo: add SM4450 ID
dt-bindings: arm: qcom,ids: add SoC ID for SM4450
soc: qcom: pmic_glink: enable altmode for SM8550
soc: qcom: pmic_glink_altmode: add retimer-switch support
soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
soc: qcom: rpmhpd: Add SDX75 power domains
dt-bindings: power: qcom,rpmpd: Add compatible for sdx75
genpd: Makefile: build imx
...
Link: https://lore.kernel.org/r/20230818023338.2484467-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers
PD_VO powerdomain for rv1126 and disabling of the automatic switch between
sdmmc and jtag for rk3588 (makes sdmmc unreliable).
This includes the shared genpd-v6.5-rc1-1 tag from Ulf Hansson, which moves
the powerdomain drivers into a new genpd subsystem.
* tag 'v6.6-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
Link: https://lore.kernel.org/r/40318909.XM6RcZxFsP@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The current code default set is_off to true except console resource,
this implies bootloader should power off all the resources it uses.
But this is not always true, let's check the HW state and set is_off.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This driver is registered as platform driver, but removing and binding
again would cause system not workable. So suppress bind attrs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Do not power off console if no_console_suspend, this will leave
the serial device's corresponding PM domain on during system suspend,
which is useful for debug system suspend.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add more PDs for i.MX8QM and i.MX8DXL, including
dma-ch, esai, gpu1, v2x-mu, seco-mu, hdmi, img and etc.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
There are 5 LPI2C, 5 LPUART and 32 DMA0 Channel resources per imx_rsrc.h,
and they are in i.MX8QM, so enlarge the PD range for them.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Move scu-pd driver under genpd directory where the driver
should be.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
PD_VO power-domain entry in RV1126 are connected to
- BIU_VO
- VOP
- RGA
- IEP
- DSIHOST
Add an entry for it.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230731110012.2913742-2-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.6
- Generic fixups: Explicitly include correct DT include.
- omap_prm: Cosmetic fixups for using devm_ api for ioremap_resource
- ti_sci: Documentation fixups, Using system_state to determine if
polling is needed.
- k3-ringcc: Documentation fixups, cleanup of log messages, using
devm_ to handle ioremap_resource.
- k3-socinfo: Add AM62PX detection.
* tag 'ti-driver-soc-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
soc: ti: Use devm_platform_ioremap_resource_byname simplify logic
soc: ti: k3-ringacc: remove non-fatal probe deferral log
soc: ti: Explicitly include correct DT includes
soc: ti: omap-prm: Use devm_platform_get_and_ioremap_resource()
soc: ti: k3-ringacc: Fixup documentation errors
firmware: ti_sci: Fixup documentation errors
firmware: ti_sci: Use system_state to determine polling
Link: https://lore.kernel.org/r/20230814160633.my3xbk5k2pxkvjyi@degrease
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers
i.MX drivers update for 6.6:
- A series from NXP i.MX developers (Peng Fan, etc.) to update imx-scu
and imx-scu-irq firmware drivers.
- Add dedicated lockdep class for nested genpd locks to fix a lockdep
warning in imx93-blk-ctrl driver.
- A change from Rob to explicitly include correct DT headers for i.MX
SoC drivers.
- Use devm_platform_ioremap_resource() in imx-weim bus driver.
* tag 'imx-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
firmware: imx: scu-irq: fix RCU complaint after M4 partition reset
firmware: imx: scu: use EOPNOTSUPP
firmware: imx: scu: use soc name for soc_id
firmware: imx: scu: increase RPC timeout
firmware: imx: scu: change init level to subsys_initcall_sync
soc: imx: Explicitly include correct DT includes
bus: imx-weim: use devm_platform_ioremap_resource
soc: imx: imx93-blk-ctrl: Add dedicated lockdep class for nested genpd locks
Link: https://lore.kernel.org/r/20230813133354.847010-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC driver changes for v6.6
Minor cleanup of headers and maintainer entries for Samsung SoC drivers.
* tag 'samsung-drivers-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
MAINTAINERS: mfd: Un-support Maxim and Samsung PMIC drivers
MAINTAINERS: samsung: Un-support cpuidle and clock drivers
soc: samsung: Explicitly include correct DT includes
Link: https://lore.kernel.org/r/20230810151250.220202-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic drivers changes for v6.6:
- Add C3 Power Domains
- Explicitly include correct DT includes in Amlogic SoC drivers
- fix to avoid potential NULL pointer dereference in meson_sm
- Merge of genpd-v6.5-rc1-1 to move genpd amlogic drivers
* tag 'amlogic-drivers-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
firmware: meson_sm: fix to avoid potential NULL pointer dereference
soc: amlogic: Explicitly include correct DT includes
soc: c3: Add support for power domains controller
dt-bindings: power: add Amlogic C3 power domains
soc: amlogic: use name instead of index as criterion
Link: https://lore.kernel.org/r/77e328b5-0d47-36e8-f62d-c745df06fb87@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230714175124.4066972-1-robh@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm into drivers-for-6.6
Merge the topic branch that introduces the genpd subsystem into the
Qualcomm soc driver tree, in order to deal with patches landed in the
Qualcomm rpmhpd driver already in this cycle.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm into v6.6/drivers-genpd
Create the new genpd subsystem and start moving providers
There are currently ~60 users of the genpd provider interface, which
implementations are sprinkled across various subsystems. To help out with
maintenance and to gain a bit better control, this creates a new subsystem
(drivers/genpd) and moves some of the soc/platform specific providers in
here.
|
|
The imx genpd was missed to be built out, add it in Makefile
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Moving only one of the two files in drivers/soc/actions to drivers/genpd
caused a link failure in allmodconfig, as drivers/genpd is entered
for compile testing, but drivers/soc/actions accidentally got skipped:
x86_64-linux-gnu-ld: vmlinux.o: in function `owl_sps_set_power':
owl-sps.c:(.text+0x16e259d): undefined reference to `owl_sps_set_pg'
Move the other one as well to allow build testing to work correctly.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
To simplify with maintenance let's move the ux500 power-domain driver to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the xilinx power-domain driver to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the ti power-domain drivers to the
new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Nishanth Menon <nm@ti.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Tero Kristo <kristo@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the powergate-bpmp driver to the
new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Note that, we leave the pmc driver in the soc directory for now, as it
looks like it may need some re-structuring before it's ready to be moved.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: <linux-tegra@vger.kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the sunxi power-domain driver to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: <linux-sunxi@lists.linux.dev>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the starfive power-domain driver to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Walker Chen <walker.chen@starfivetech.com>
Cc: Conor Dooley <conor@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the samsung power-domain driver to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: <linux-samsung-soc@vger.kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the rockchip power-domain driver to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: <linux-rockchip@lists.infradead.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the renesas power-domain drivers to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: <linux-renesas-soc@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the qcom power-domain drivers to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the mediatek power-domain drivers
to the new genpd directory. Going forward, patches are intended to be
managed through a separate git tree, according to MAINTAINERS.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: <linux-mediatek@lists.infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the imx power-domain drivers to the
new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: <kernel@pengutronix.de>
Cc: <linux-imx@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the bcm power-domain drivers to the
new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
While moving the drivers, we end up with a directory for bcm63xx that only
contains a Kconfig file, which seems a bit silly. Let's therefore also move
the Kconfig options into the Kconfig file a directory above, as it allows
us to drop the directory too.
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-rpi-kernel@lists.infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the apple power-domain driver to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Hector Martin <marcan@marcan.st>
Cc: Sven Peter <sven@svenpeter.dev>
Cc: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Cc: <asahi@lists.linux.dev>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the amlogic power-domain drivers to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: <linux-amlogic@lists.infradead.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the action power-domain driver to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: <linux-actions@lists.infradead.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
There are currently ~60 users of the genpd provider interface, which
implementations are sprinkled across various subsystems. To simplify with
maintenance let's create a new subsystem (drivers/genpd) and start moving
the providers in there.
My intention is also to host a git tree to collect and to get the patches
tested/integrated through the linux-next tree. Ideally this should release
some of the burden on the soc maintainers.
Note that, I will of course require acks/reviews from the current platform
maintainers, hence the MAINTAINERS file needs to be updated accordingly for
each genpd provider that is moved into the new genpd subsystem.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
