summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-aspeed.c
AgeCommit message (Collapse)AuthorFilesLines
2021-12-10gpio: aspeed: Convert aspeed_gpio.lock to raw_spinlockIwona Winiarska1-26/+26
The gpio-aspeed driver implements an irq_chip which need to be invoked from hardirq context. Since spin_lock() can sleep with PREEMPT_RT, it is no longer legal to invoke it while interrupts are disabled. This also causes lockdep to complain about: [ 0.649797] [ BUG: Invalid wait context ] because aspeed_gpio.lock (spin_lock_t) is taken under irq_desc.lock (raw_spinlock_t). Let's use of raw_spinlock_t instead of spinlock_t. Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-08-12gpio: Bulk conversion to generic_handle_domain_irq()Marc Zyngier1-6/+3
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-26gpio: aspeed: fix ast2600 bank propertiesBilly Tsai1-0/+1
GPIO_T is mapped to the most significant byte of input/output mask, and the byte in "output" mask should be 0 because GPIO_T is input only. All the other bits need to be 1 because GPIO_Q/R/S support both input and output modes. Fixes: ab4a85534c3e ("gpio: aspeed: Add in ast2600 details to Aspeed driver") Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-02Merge tag 'gpio-v5.9-2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Some late GPIO fixes for the v5.9 series: - Fix compiler warnings on the OMAP when PM is disabled - Clear the interrupt when setting edge sensitivity on the Spreadtrum driver. - Fix up spurious interrupts on the TC35894. - Support threaded interrupts on the Siox controller. - Fix resource leaks on the mockup driver. - Fix line event handling in syscall compatible mode for the character device. - Fix an unitialized variable in the PCA953A driver. - Fix access to all GPIO IRQs on the Aspeed AST2600. - Fix line direction on the AMD FCH driver. - Use the bitmap API instead of compiler intrinsics for bit manipulation in the PCA953x driver" * tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957x gpio: pca953x: Use bitmap API over implicit GCC extension gpio: amd-fch: correct logic of GPIO_LINE_DIRECTION gpio: aspeed: fix ast2600 bank properties gpio/aspeed-sgpio: don't enable all interrupts by default gpio/aspeed-sgpio: enable access to all 80 input & output sgpios gpio: pca953x: Fix uninitialized pending variable gpiolib: Fix line event handling in syscall compatible mode gpio: mockup: fix resource leak in error path gpio: siox: explicitly support only threaded irqs gpio: tc35894: fix up tc35894 interrupt configuration gpio: sprd: Clear interrupt when setting the type as edge gpio: omap: Fix warnings if PM is disabled
2020-09-24gpio: aspeed: fix ast2600 bank propertiesTao Ren1-2/+2
GPIO_U is mapped to the least significant byte of input/output mask, and the byte in "output" mask should be 0 because GPIO_U is input only. All the other bits need to be 1 because GPIO_V/W/X support both input and output modes. Similarly, GPIO_Y/Z are mapped to the 2 least significant bytes, and the according bits need to be 1 because GPIO_Y/Z support both input and output modes. Fixes: ab4a85534c3e ("gpio: aspeed: Add in ast2600 details to Aspeed driver") Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-3/+3
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-01-23gpio: aspeed-sgpio: fixed typosSachin agarwal1-1/+1
This fixes some various typos. Signed-off-by: Sachin Agarwal <asachin591@gmail.com> Link: https://lore.kernel.org/r/20200118105319.68637-1-sachinagarwal@sachins-MacBook-2.local Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-07gpio: Use new GPIO_LINE_DIRECTIONMatti Vaittinen1-4/+3
It's hard for occasional GPIO code reader/writer to know if values 0/1 equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT to help them out. NOTE - for gpio-amd-fch and gpio-bd9571mwv: This commit also changes the return value for direction get to equal 1 for direction INPUT. Prior this commit these drivers might have returned some other positive value but 1 for INPUT. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-11gpio: aspeed: Add in ast2600 details to Aspeed driverRashmica Gupta1-2/+20
The ast2600 is a new generation of SoC from ASPEED. Similarly to the ast2400 and ast2500, it has a GPIO controller for it's 3.3V GPIO pins. Additionally, it has a GPIO controller for 1.8V GPIO pins. As the register names for both controllers are the same and the 36 1.8V GPIOs and the first 36 of the 3.3V GPIOs are all bidirectional, we can use the same configuration struct and use the ngpio property to differentiate between the two sets of GPIOs. Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Link: https://lore.kernel.org/r/20190906063737.15428-1-rashmica.g@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-11gpio: aspeed: Use ngpio property from device tree if availableRashmica Gupta1-7/+11
Use the ngpio property from the device tree if it exists. If it doesn't then fallback to the hardcoded value in the config. This is in preparation for adding ast2600 support. The ast2600 SoC has two GPIO controllers and so requires two instances of the GPIO driver. We use the ngpio property to different between them as they have different numbers of GPIOs. Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Link: https://lore.kernel.org/r/20190906062727.13521-1-rashmica.g@gmail.com Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-11gpio: aspeed: Setup irqchip dynamicallyRashmica Gupta1-9/+7
This is in preparation for adding ast2600 support. The ast2600 SoC requires two instances of the GPIO driver as it has two GPIO controllers. Each instance needs it's own irqchip. Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Link: https://lore.kernel.org/r/20190906062644.13445-1-rashmica.g@gmail.com Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-11gpio/aspeed: Fix incorrect number of banksRashmica Gupta1-1/+1
The current calculation for the number of GPIO banks is only correct if the number of GPIOs is a multiple of 32 (if there were 31 GPIOs we would currently say there are 0 banks, which is incorrect). Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver') Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190906062623.13354-1-rashmica.g@gmail.com Reviewed-by: Joel Stanley <joel@jms.d.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-11gpio: Initialize the irqchip valid_mask with a callbackLinus Walleij1-7/+6
After changing the valid_mask for the struct gpio_chip to detect the need and presence of a valid mask with the presence of a .init_valid_mask() callback to fill it in, we augment the gpio_irq_chip to use the same logic. Switch all driver using the gpio_irq_chio valid_mask over to this new method. This makes sure the valid_mask for the gpio_irq_chip gets filled in when we add the gpio_chip, which makes it a little easier to switch over drivers using the old way of setting up gpio_irq_chip over to the new method of passing the gpio_irq_chip along with the gpio_chip. (See drivers/gpio/TODO for details.) Cc: Joel Stanley <joel@jms.id.au> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Link: https://lore.kernel.org/r/20190904140104.32426-1-linus.walleij@linaro.org
2019-08-15gpio: aspeed: Pass irqchip when adding gpiochipLinus Walleij1-31/+29
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20190809125515.19094-1-linus.walleij@linaro.org Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-08Merge tag 'v5.1-rc3' into develLinus Walleij1-0/+2
Linux 5.1-rc3
2019-04-04drivers: gpio: aspeed: use devm_platform_ioremap_resource()Enrico Weigelt, metux IT consult1-3/+1
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-03-25gpio: aspeed: fix a potential NULL pointer dereferenceKangjie Lu1-0/+2
In case devm_kzalloc, the patch returns ENOMEM to avoid potential NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2018-12-21gpio: aspeed: remove duplicated statementTao Ren1-1/+0
Remove duplicated assignment statement from aspeed_gpio_probe() function. Signed-off-by: Tao Ren <taoren@fb.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-13gpio: aspeed: fix compile testing warningArnd Bergmann1-1/+1
Gcc cannot always see that BUG_ON(1) is guaranteed to not return, so we get a warning message in some configurations: drivers/gpio/gpio-aspeed.c: In function 'bank_reg': drivers/gpio/gpio-aspeed.c:244:1: error: control reaches end of non-void function [-Werror=return-type] Using a plain BUG() is easier here and avoids the problem. Fixes: 44ddf559d579 ("gpio: aspeed: Rework register type accessors") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-02gpio: aspeed: Add interfaces for co-processor to grab GPIOsBenjamin Herrenschmidt1-20/+231
On the Aspeed chip, the GPIOs can be under control of the ARM chip or of the ColdFire coprocessor. (There's a third command source, the LPC bus, which we don't use or support yet). The control of which master is allowed to modify a given GPIO is per-bank (8 GPIOs). Unfortunately, systems already exist for which we want to use GPIOs of both sources in the same bank. This provides an API exported by the gpio-aspeed driver that an aspeed coprocessor driver can use to "grab" some GPIOs for use by the coprocessor, and allow the coprocessor driver to provide callbacks for arbitrating access. Once at least one GPIO of a given bank has been "grabbed" by the coprocessor, the entire bank is marked as being under coprocessor control. It's command source is switched to the coprocessor. If the ARM then tries to write to a GPIO in such a marked bank, the provided callbacks are used to request access from the coprocessor driver, which is responsible to doing whatever is necessary to "pause" the coprocessor or prevent it from trying to use the GPIOs while the ARM is doing its accesses. During that time, the command source for the bank is temporarily switched back to the ARM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-02gpio: aspeed: Add command source registersBenjamin Herrenschmidt1-0/+54
This adds the definitions for the command source registers and a helper to set them. Those registers allow to control which bus master on the SoC is allowed to modify a given bank of GPIOs and will be used by subsequent patches. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-02gpio: aspeed: Add "Read Data" register to read the write latchBenjamin Herrenschmidt1-2/+27
The Aspeed GPIO hardware has a quirk: the value register, for an output GPIO, doesn't contain the last value written (the write latch content) but the sampled input value. This means that when reading back shortly after writing, you can get an incorrect value as the input value is delayed by a few synchronizers. The HW supports a separate read-only register "Data Read Register" which allows you to read the write latch instead. This adds the definition for it, and uses it for the initial population of the GPIO value cache. It will be used more in subsequent patches. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-02gpio: aspeed: Rework register type accessorsBenjamin Herrenschmidt1-49/+69
Use a single accessor function for all register types instead of several spread around. This will make it easier/cleaner to introduce new registers and keep the mechanism in one place. The big switch/case is optimized at compile time since the switch value is a constant. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-2/+2
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-08Merge tag 'gpio-v4.18-1' of ↵Linus Torvalds1-4/+20
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.18 development cycle. Core changes: - We have killed off VLA from the core library and all drivers. The background should be clear for everyone at this point: https://lwn.net/Articles/749064/ Also I just don't like VLA's, kernel developers hate it when compilers do things behind their back. It's as simple as that. I'm sorry that they even slipped in to begin with. Kudos to Laura Abbott for exorcising them. - Support GPIO hogs in machines/board files. New drivers and chip support: - R-Car r8a77470 (RZ/G1C) - R-Car r8a77965 (M3-N) - R-Car r8a77990 (E3) - PCA953x driver improvements to accomodate more variants. Improvements and new features: - Support one interrupt per line on port A in the DesignWare dwapb driver. Misc: - Random cleanups, right header files in the drivers, some size optimizations etc" * tag 'gpio-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits) gpio: davinci: fix build warning when !CONFIG_OF gpio: dwapb: Fix rework support for 1 interrupt per port A GPIO gpio: pxa: Include the right header gpio: pl061: Include the right header gpio: pch: Include the right header gpio: pcf857x: Include the right header gpio: pca953x: Include the right header gpio: palmas: Include the right header gpio: omap: Include the right header gpio: octeon: Include the right header gpio: mxs: Switch to SPDX identifier gpio: Remove VLA from stmpe driver gpio: mxc: Switch to SPDX identifier gpio: mxc: add clock operation gpio: Remove VLA from gpiolib gpio: aspeed: Use a cache of output data registers gpio: aspeed: Set output latch before changing direction gpio: pca953x: fix address calculation for pcal6524 gpio: pca953x: define masks for addressing common and extended registers gpio: pca953x: set the PCA_PCAL flag also when matching by DT ...
2018-05-23gpio: aspeed: Use a cache of output data registersBenjamin Herrenschmidt1-2/+19
The current driver does a read/modify/write of the output registers when changing a bit in __aspeed_gpio_set(). This is sub-optimal for a couple of reasons: - If any of the neighbouring GPIOs (sharing the shared register) isn't (yet) configured as an output, it will read the current input value, and then apply it to the output latch, which may not be what the user expects. There should be no bug in practice as aspeed_gpio_dir_out() will establish a new value but it's not great either. - The GPIO block in the aspeed chip is clocked rather slowly (typically 25Mhz). That extra MMIO read halves the maximum speed at which we can toggle the GPIO. This provides a significant performance improvement to the GPIO based FSI master. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23gpio: aspeed: Set output latch before changing directionBenjamin Herrenschmidt1-2/+1
In aspeed_gpio_dir_out(), we need to establish the new output value in the output latch *before* we change the direction to output in order to avoid a glitch on the output line if the previous value of the latch was different. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-26gpio: fix aspeed_gpio unmask irqGovert Overgaauw1-1/+1
The unmask function disables all interrupts in a bank when unmasking an interrupt. Only disable the given interrupt. Cc: stable@vger.kernel.org Signed-off-by: Govert Overgaauw <govert.overgaauw@prodrive-technologies.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-28gpio: fix aspeed_gpio_banks array size checkVasyl Gomonovych1-1/+1
The test should be >= ARRAY_SIZE() instead of > ARRAY_SIZE(). Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-03gpio: aspeed: Add support for reset toleranceAndrew Jeffery1-2/+37
Use the new pinconf parameter for state persistence to expose the associated capability of the Aspeed GPIO controller. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-09Merge branch 'gpio-irqchip-rework' of /home/linus/linux-gpio into develLinus Walleij1-3/+6
2017-11-08gpio: Move irq_valid_mask into struct gpio_irq_chipThierry Reding1-2/+2
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding1-1/+1
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-19gpio: mark expected switch fall-throughsGustavo A. R. Silva1-0/+3
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-22pinctrl/gpio: Unify namespace for cross-callsLinus Walleij1-2/+2
The pinctrl_request_gpio() and pinctrl_free_gpio() break the nice namespacing in the other cross-calls like pinctrl_gpio_foo(). Just rename them and all references so we have one namespace with all cross-calls under pinctrl_gpio_*(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-15gpio: aspeed: Remove reference to clock name in debounce warning messageAndrew Jeffery1-1/+1
HPLL is in fact not the clock we need. Remove the description of which clock we failed to find a phandle to in order to avoid any further error. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22gpio: aspeed: Don't attempt to debounce if disabledJoel Stanley1-0/+3
We warn the user at driver probe time that debouncing is disabled. However, if they request debouncing later on we print a confusing error message: gpio_aspeed 1e780000.gpio: Failed to convert 5000us to cycles at 0Hz: -524 Instead bail out when the clock is not present. Fixes: 5ae4cb94b3133 (gpio: aspeed: Add debounce support) Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24gpio: aspeed: Add open-source and open-drain supportAndrew Jeffery1-0/+4
As per the datasheet, manage the IO and value states to implement open-source/open-drain, but do this by falling back to gpiolib's emulation. This commit simply makes the behaviour explicit for clarity, rather than relying on the implicit return of -ENOTSUPP to trigger the emulation. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24gpio: aspeed: Add debounce supportAndrew Jeffery1-5/+276
Each GPIO in the Aspeed GPIO controller can choose one of four input debounce states: to disable debouncing for an input, or select from one of three programmable debounce timer values. Each GPIO in a four-bank-set is assigned one bit in each of two debounce configuration registers dedicated to the set, and selects a debounce state by configuring the two bits to select one of the four options. The limitation on debounce timer values is managed by mapping offsets onto a configured timer value and keeping count of the number of users a timer has. Timer values are configured on a first-come-first-served basis. A small twist in the hardware design is that the debounce configuration register numbering is reversed with respect to the binary representation of the debounce timer of interest (i.e. debounce register 1 represents bit 1, and debounce register 2 represents bit 0 of the timer numbering). Tested on an AST2500EVB with additional inspection under QEMU's romulus-bmc machine. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-04gpio: aspeed: Remove dependence on GPIOF_* macrosAndrew Jeffery1-3/+2
1736f75d35e47409ad776273133d0f558a4c8253 is a (v2) patch which had unresolved review comments[1]. Address the comments by removing the use of macros from the consumer header (this patch represents the diff between v2 and v3[2]). [1] https://lkml.org/lkml/2017/1/26/337 [2] https://lkml.org/lkml/2017/1/26/786 Fixes: 1736f75d35e4 ("gpio: aspeed: Add banks Y, Z, AA, AB and AC") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: aspeed: Add banks Y, Z, AA, AB and ACAndrew Jeffery1-14/+160
This is less straight-forward than one would hope, as some banks only have 4 pins rather than 8, others are output only, yet more (W and X, already supported) are input-only, and in the case of the g4 SoC bank AC doesn't exist. Add some structs to describe the varying properties of different banks and integrate mechanisms to deny requests for unsupported configurations. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: aspeed: Make bank names stringsJoel Stanley1-7/+7
The Aspeed SoCs have more GPIOs than can be represented with A-Z. The documentation uses two letter names such as AA and AB, so make the names a three-character array in the bank struct to accommodate this. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23gpio: aspeed: remove redundant return value checkWei Yongjun1-3/+0
Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15gpio: aspeed: fix return value check in aspeed_gpio_probe()Wei Yongjun1-2/+2
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13gpio: aspeed: add MODULE_LICENSE()Linus Walleij1-0/+1
The build complains about missing MODULE_LICENSE() in the Aspeed GPIO driver. The license is evident from the file header, put in "GPL". Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alistair Popple <alistair@popple.id.au> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07gpio: Add Aspeed driverJoel Stanley1-0/+457
The Aspeed SoCs contain GPIOs banked by letter, where each bank contains 8 pins. The GPIO banks are then grouped in sets of four in the register layout. The implementation exposes multiple banks through the one driver and requests and releases pins via the pinctrl subsystem. The hardware supports generation of interrupts from all GPIO-capable pins. A number of hardware features are not yet supported: Configuration of interrupt direction (ARM or LPC), debouncing, and WDT reset tolerance for output ports. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>