summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-eic-sprd.c
AgeCommit message (Collapse)AuthorFilesLines
2024-02-12Merge tag 'v6.8-rc4' into gpio/for-nextBartosz Golaszewski1-4/+28
Linux 6.8-rc4 Pulling this for a bugfix upstream with which the gpio/for-next branch conflicts.
2024-01-22gpio: eic-sprd: Clear interrupt after set the interrupt typeWenhua Lin1-4/+28
The raw interrupt status of eic maybe set before the interrupt is enabled, since the eic interrupt has a latch function, which would trigger the interrupt event once enabled it from user side. To solve this problem, interrupts generated before setting the interrupt trigger type are ignored. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-01-22gpio: eic-sprd: Optimize the calculation method of eic numberWenhua Lin1-6/+4
The num_eics is a default value, but some SoCs support more than 8. In order to adapt to all projects, the total number of eics is automatically calculated through dts. Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-09-13gpio: eic-sprd: use a helper variable for &pdev->devBartosz Golaszewski1-10/+10
Instead of dereferencing pdev everywhere, just store the address of the underlying struct device in a local variable. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
2023-09-13gpio: eic-sprd: unregister from the irq notifier on remove()Bartosz Golaszewski1-2/+17
This is a tristate module, it can be unloaded. We need to cleanup properly and unregister from the interrupt notifier on driver detach. Fixes: b32415652a4d ("gpio: eic-sprd: use atomic notifiers to notify all chips about irqs") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
2023-09-11gpio: eic-sprd: use atomic notifiers to notify all chips about irqsBartosz Golaszewski1-19/+25
Calling gpiochip_find() from interrupt handler in this driver is an abuse of the GPIO API. It only happens to work because nobody added a might_sleep() to it and the lock used by GPIOLIB is a spinlock. Both will soon be changed as we're limiting both the number of interfaces allowed to be called from atomic context as well as making struct gpio_chip private to the GPIO code that owns it. We'll also switch to protecting the global GPIO device list with a mutex as there is no reason to allow changes to it from interrupt handlers. Instead of iterating over all SPRD chips and looking up each corresponding GPIO chip, let's make each SPRD GPIO controller register with a notifier chain. The chain will be called at interrupt so that every chip that already probed will be notified. The rest of the interrupt handling remains the same. This should result in faster code as we're avoiding iterating over the list of all GPIO devices. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com> Tested-by: Wenhua Lin <wenhua.lin@unisoc.com>
2023-07-29gpio: eic-sprd: remove unneeded platform_set_drvdata() callAndrei Coardos1-1/+0
The platform_set_drvdata() call was never used, ever since the driver was originally added. It looks like this copy+paste left-over. Possibly the author copied from a driver that had this line, but also had a remove hook. Reviewed-by: Alexandru Ardelean <alex@shruggie.ro> Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-07-19gpio: Explicitly include correct DT includesRob Herring1-1/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-12-30gpio: eic-sprd: Make the irqchip immutableCixi Geng1-9/+14
Remove the irq_chip from pmic_eic structure, use the various calls by defining the statically irq_chip structure. Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2021-12-17gpio: Get rid of duplicate of_node assignment in the driversAndy Shevchenko1-1/+0
GPIO library does copy the of_node from the parent device of the GPIO chip, there is no need to repeat this in the individual drivers. Remove these assignment all at once. For the details one may look into the of_gpio_dev_init() implementation. While at it, remove duplicate parent device assignment where it is the case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2020-12-09gpio: eic-sprd: break loop when getting NULL device resourceChunyan Zhang1-1/+1
EIC controller have unfixed numbers of banks on different Spreadtrum SoCs, and each bank has its own base address, the loop of getting there base address in driver should break if the resource gotten via platform_get_resource() is NULL already. The later ones would be all NULL even if the loop continues. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20201209055106.840100-1-zhang.lyra@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-3/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-04-02Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()"Baolin Wang1-2/+7
This reverts commit 0f5cb8cc27a266c81e6523b436479802e9aafc9e. This commit will cause below warnings, since our EIC controller can support differnt banks on different Spreadtrum SoCs, and each bank has its own base address, we will get invalid resource warning if the bank number is less than SPRD_EIC_MAX_BANK on some Spreadtrum SoCs. So we should not use devm_platform_ioremap_resource() here to remove the warnings. [ 1.118508] sprd-eic 40210000.gpio: invalid resource [ 1.118535] sprd-eic 40210000.gpio: invalid resource [ 1.119034] sprd-eic 40210080.gpio: invalid resource [ 1.119055] sprd-eic 40210080.gpio: invalid resource [ 1.119462] sprd-eic 402100a0.gpio: invalid resource [ 1.119482] sprd-eic 402100a0.gpio: invalid resource [ 1.119893] sprd-eic 402100c0.gpio: invalid resource [ 1.119913] sprd-eic 402100c0.gpio: invalid resource Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/8d3579f4b49bb675dc805035960f24852898be28.1585734060.git.baolin.wang7@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-01gpio: eic: sprd: Fix the incorrect EIC offset when togglingBruce Chen1-3/+4
When toggling the level trigger to emulate the edge trigger, the EIC offset is incorrect without adding the corresponding bank index, thus fix it. Fixes: 7bf0d7f62282 ("gpio: eic: Add edge trigger emulation for EIC") Cc: stable@vger.kernel.org Signed-off-by: Bruce Chen <bruce.chen@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-08-05gpio: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-3/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: linux-gpio@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-16-swboyd@chromium.org Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: eic-sprd: Use devm_platform_ioremap_resource()Enrico Weigelt, metux IT consult1-7/+2
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-11gpio: eic: sprd: Fix incorrect irq type setting for the sync EICBaolin Wang1-0/+1
When setting sync EIC as IRQ_TYPE_EDGE_BOTH type, we missed to set the SPRD_EIC_SYNC_INTMODE register to 0, which means detecting edge signals. Thus this patch fixes the issue. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Cc: <stable@vger.kernel.org> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-17Merge tag 'gpio-v5.1-updates-for-linus' of ↵Linus Walleij1-1/+13
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.1 - support for a new variant of pca953x - documentation fix from Wolfram - some tegra186 name changes - two minor fixes for madera and altera-a10sr
2019-02-13gpio: sprd: Add missing break in switch statementGustavo A. R. Silva1-0/+1
Fix the following warning by adding a missing break: drivers/gpio/gpio-eic-sprd.c: In function ‘sprd_eic_irq_set_type’: drivers/gpio/gpio-eic-sprd.c:403:3: warning: this statement may fall through [-Wimplicit-fallthrough=] switch (flow_type) { ^~~~~~ drivers/gpio/gpio-eic-sprd.c:435:2: note: here default: ^~~~~~~ This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-23gpio: sprd: Fix incorrect irq type setting for the async EICNeo Hou1-0/+1
When setting async EIC as IRQ_TYPE_EDGE_BOTH type, we missed to set the SPRD_EIC_ASYNC_INTMODE register to 0, which means detecting edge signals. Thus this patch fixes the issue. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Cc: <stable@vger.kernel.org> Signed-off-by: Neo Hou <neo.hou@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-01-23gpio: sprd: Fix the incorrect data registerNeo Hou1-1/+12
Since differnt type EICs have its own data register to read, thus fix the incorrect data register. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Cc: <stable@vger.kernel.org> Signed-off-by: Neo Hou <neo.hou@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2018-05-16gpio: eic: Add edge trigger emulation for EICBaolin Wang1-0/+73
The Spreadtrum debounce EIC and latch EIC can not support edge trigger, but most GPIO users (like gpio-key driver) only use the edge trigger, thus the EIC driver need add some support to emulate the edge trigger to satisfy this requirement. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27gpio: Add Spreadtrum EIC driver supportBaolin Wang1-0/+606
The Spreadtrum digital-chip EIC controller has 4 sub-modules: debounce EIC, latch EIC, async EIC and sync EIC, and each sub-module can has multiple banks and each bank contains 8 EICs. Each EIC can only be used as input mode, and has the capability to trigger interrupts when detecting input signals. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-29 23:30:35 +0300