summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-exar.c
AgeCommit message (Collapse)AuthorFilesLines
2023-07-29gpio: exar: remove unneeded platform_set_drvdata() callAndrei Coardos1-2/+0
The platform_set_drvdata() was needed when the driver had an explicit remove function. That function got removed a while back, so we don't need to keep a pointer (on 'dev->driver_data') for the private data of the driver anymore. Reviewed-by: Alexandru Ardelean <alex@shruggie.ro> Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-26gpio: exar: Allow IO port accessAndy Shevchenko1-0/+1
It's possible that PCI device can provide an IO port resource for the device. regmap MMIO currently uses MMIO by default. With an additional flag we enable support for IO port accesses. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-09-04gpio: exar: access MPIO registers on cascaded chipsQingtao Cao1-5/+35
When EXAR xr17v35x chips are cascaded in order to access the MPIO registers (part of the Device Configuration Registers) of the secondary chips, an offset needs to be applied based on the number of primary chip's UART channels. Signed-off-by: Qingtao Cao <qingtao.cao@digi.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2020-11-25gpio: exar: use devm action for freeing the IDA and drop remove()Bartosz Golaszewski1-15/+12
We can simplify the error path in probe() and drop remove() entirely if we provide a devm action for freeing the device ID. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25gpio: exar: switch to using regmapBartosz Golaszewski1-54/+37
We can simplify the code in gpio-exar by using regmap. This allows us to drop the mutex (regmap provides its own locking) and we can also reuse regmap's bit operations instead of implementing our own update function. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25gpio: exar: unduplicate address and offset computationBartosz Golaszewski1-12/+28
Provide and use helpers for calculating the register address and bit offset instead of hand coding it in every function. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25gpio: exar: use a helper variable for &pdev->devBartosz Golaszewski1-8/+7
It's more elegant to use a helper local variable to store the address of the underlying struct device than to dereference pdev everywhere. It also has the benefit of avoiding unnecessary line breaks. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25gpio: exar: switch to a simpler IDA interfaceBartosz Golaszewski1-3/+3
We don't need to specify any ranges when allocating IDs so we can switch to ida_alloc() and ida_free() instead of the ida_simple_ counterparts. ida_simple_get(ida, 0, 0, gfp) is equivalent to ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID larger than INT_MAX. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25gpio: exar: include idr.hBartosz Golaszewski1-0/+1
This driver uses IDA APIs but doesn't include the relevant header. This fixes it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25gpio: exar: add a newline after the copyright noticeBartosz Golaszewski1-0/+1
It's customary to have a newline between the copyright header and the includes. Add one to gpio-exar. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-05-05gpio: exar: Fix bad handling for ida_simple_get error pathTakashi Iwai1-2/+5
The commit 7ecced0934e5 ("gpio: exar: add a check for the return value of ida_simple_get fails") added a goto jump to the common error handler for ida_simple_get() error, but this is wrong in two ways: it doesn't set the proper return code and, more badly, it invokes ida_simple_remove() with a negative index that shall lead to a kernel panic via BUG_ON(). This patch addresses those two issues. Fixes: 7ecced0934e5 ("gpio: exar: add a check for the return value of ida_simple_get fails") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-11-07gpio: Use new GPIO_LINE_DIRECTIONMatti Vaittinen1-1/+4
It's hard for occasional GPIO code reader/writer to know if values 0/1 equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT to help them out. NOTE - for gpio-amd-fch and gpio-bd9571mwv: This commit also changes the return value for direction get to equal 1 for direction INPUT. Prior this commit these drivers might have returned some other positive value but 1 for INPUT. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22gpio: exar: add a check for the return value of ida_simple_get failsKangjie Lu1-0/+2
ida_simple_get may fail and return a negative error number. The fix checks its return value; if it fails, go to err_destroy. Cc: <stable@vger.kernel.org> Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2017-08-01gpio: exar: Use correct property prefix and document bindingsJan Kiszka1-1/+1
The device-specific property should be prefixed with the vendor name, not "linux,", as Linus Walleij pointed out. Change this and document the bindings of this platform device. We didn't ship the old binding in a release yet. So we can still change it without breaking an official API. Fixes: 380b1e2f3a2f ("gpio-exar/8250-exar: Make set of exported GPIOs configurable") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-03gpio-exar/8250-exar: Make set of exported GPIOs configurableJan Kiszka1-23/+33
On the SIMATIC, IOT2040 only a single pin is exportable as GPIO, the rest is required to operate the UART. To allow modeling this case, expand the platform device data structure to specify a (consecutive) pin subset for exporting by the gpio-exar driver. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-07-03gpio-exar/8250-exar: Rearrange gpiochip parenthoodJan Kiszka1-1/+1
Set the parent of the exar gpiochip to its platform device, like other gpiochips are doing it. In order to keep the relationship discoverable for ACPI systems, set the platform device companion to the PCI device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-03gpio: exar: Fix iomap requestJan Kiszka1-7/+3
The UART driver already maps the resource for us. Trying to do this here only fails and leaves us with a non-working device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-03gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cardsJan Kiszka1-3/+0
Commtech adapters need the MPIOs for internal purposes, and the gpio-exar driver already refused to pick them up. But there is actually no point in even creating the underlying platform device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-20gpio: exar: Fix reading of directions and valuesJan Kiszka1-4/+4
First, the logic for translating a register bit to the return code of exar_get_direction and exar_get_value were wrong. And second, there was a flip regarding the register bank in exar_get_direction. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: exar: Allocate resources on behalf of the platform deviceJan Kiszka1-2/+2
Do not allocate resources on behalf of the parent device but on our own. Otherwise, cleanup does not properly work if gpio-exar is removed but not the parent device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio-exar/8250-exar: Fix passing in of parent PCI deviceJan Kiszka1-1/+1
This fixes reloading of the GPIO driver for the same platform device instance as created by the exar UART driver: First of all, the driver sets drvdata to its own value during probing and does not restore the original value on exit. But this won't help anyway as the core clears drvdata after the driver left. Set the platform device parent instead. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15gpio: exar: Set proper output level in exar_direction_outputAxel Lin1-11/+12
Current code does not set output level in exar_direction_output, fix it. Also move the direction_output/direction_input code block to avoid forward declaration for exar_set_value(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: exar: add gpio for exar cardsSudip Mukherjee1-0/+200
Exar XR17V352/354/358 chips have 16 multi-purpose inputs/outputs which can be controlled using gpio interface. Add the gpio specific code. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>