summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-rcar.c
AgeCommit message (Collapse)AuthorFilesLines
2018-07-13gpio: rcar: Implement .get_direction() callbackGeert Uytterhoeven1-0/+8
Allow gpiolib to read back the current I/O direction configuration by implementing the .get_direction() callback. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-02gpio: rcar: Include the right headerLinus Walleij1-1/+1
This is a GPIO driver, include only <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-18Merge tag 'v4.16-rc5' into develLinus Walleij1-22/+6
Linux 4.16-rc5 merged into the GPIO devel branch to resolve a nasty conflict between fixes and devel in the RCAR driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-05gpio: rcar: Use wakeup_path i.s.o. explicit clock handlingGeert Uytterhoeven1-22/+16
Since commit ab82fa7da4dce5c7 ("gpio: rcar: Prevent module clock disable when wake-up is enabled"), when a GPIO is used for wakeup, the GPIO block's module clock (if exists) is manually kept running during system suspend, to make sure the device stays active. However, this explicit clock handling is merely a workaround for a failure to properly communicate wakeup information to the device core. Instead, set the device's power.wakeup_path field, to indicate this device is part of the wakeup path. Depending on the PM Domain's active_wakeup configuration, the genpd core code will keep the device enabled (and the clock running) during system suspend when needed. This allows for the removal of all explicit clock handling code from the driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: gpio-rcar: Support S2RAMHien Dang1-0/+66
This patch adds an implementation that saves and restores the state of GPIO configuration on suspend and resume. Signed-off-by: Hien Dang <hien.dang.eb@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Modify structure of the bank info to simplify a saving registers] [Remove DEV_PM_OPS macro] Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-09Merge branch 'gpio-irqchip-rework' of /home/linus/linux-gpio into develLinus Walleij1-15/+9
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding1-1/+1
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-31gpio-rcar: use devm_ioremap_resource()Sergei Shtylyov1-8/+6
Using devm_ioremap_resource() has several advantages over devm_ioremap(): - it checks the passed resource's validity; - it calls devm_request_mem_region() to check for the resource overlap; - it prints an error message in case of error. We can call devm_ioremap_resource() instead of devm_ioremap_nocache() as ioremap() and ioremap_nocache() are implemented identically on ARM. Doing this saves 2 LoCs and 80 bytes (AArch64 gcc 4.8.5). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-08gpio: rcar: Use of_device_get_match_data() helperGeert Uytterhoeven1-6/+2
Use the of_device_get_match_data() helper instead of open coding. Note that the gpio-rcar driver is used with DT only, so there's always a valid match. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-22pinctrl/gpio: Unify namespace for cross-callsLinus Walleij1-2/+2
The pinctrl_request_gpio() and pinctrl_free_gpio() break the nice namespacing in the other cross-calls like pinctrl_gpio_foo(). Just rename them and all references so we have one namespace with all cross-calls under pinctrl_gpio_*(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: rcar: add gen[123] fallback compatibility stringsSimon Horman1-0/+10
Add fallback compatibility string for R-Car Gen 1, 2 and 3. In the case of Renesas R-Car hardware we know that there are generations of SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme being adopted for drivers for Renesas SoCs. Also deprecate renesas,gpio-rcar as its name is more generic than its implementation. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29gpio: rcar: Add R8A7743 (RZ/G1M) supportBiju Das1-0/+4
Renesas RZ/G1M (R8A7743) SoC GPIO blocks are identical to the R-Car Gen2 family. Add support for its GPIO controllers. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-28gpio: rcar: Fine-grained Runtime PM supportGeert Uytterhoeven1-4/+16
Currently gpio modules are runtime-resumed at probe time. This means the gpio module will be active all the time (except during system suspend, if not configured as a wake-up source). While an R-Car Gen2 gpio module retains pins configured for output at the requested level while put in standby mode, gpio register cannot be accessed while suspended. Unfortunately pm_runtime_get_sync() cannot be called from all contexts where gpio register access is needed. Hence move the Runtime PM handling from probe/remove time to gpio request/free time, which is probably the best we can do. On r8a7791/koelsch, gpio modules 0, 1, 3, and 4 are now suspended during normal use (gpio2 is used for LEDs and regulators, gpio5 for keys, gpio6 for SD-Card CD & WP, gpio7 for keys and regulators). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [Niklas: s/gpio_to_priv(chip)/gpiochip_get_data(chip)/] Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-28gpio: rcar: set IRQ chip parent_deviceNiklas Söderlund1-0/+1
This enables Runtime PM handling for interrupts. By setting the parent_device in struct irq_chip genirq will call the pm_runtime_get/put APIs when an IRQ is requested/freed. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-08gpio: rcar: Add r8a7796 (R-Car M3-W) supportSimon Horman1-0/+4
R-Car Gen3's GPIO blocks are identical to Gen2's in every respect. Based on work for the r8a7795 (R-Car H3) by Ulrich Hecht. Cc: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: rcar: add R8A7792 supportSergei Shtylyov1-0/+3
Renesas R8A7792 SoC is a member of the R-Car gen2 family, add support for its GPIO controllers. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-18Merge tag 'gpio-v4.7-1' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel cycle v4.7: Core infrastructural changes: - Support for natively single-ended GPIO driver stages. This means that if the hardware has registers to configure open drain or open source configuration, we use that rather than (as we did before) try to emulate it by switching the line to an input to get high impedance. This is also documented throughly in Documentation/gpio/driver.txt for those of you who did not understand one word of what I just wrote. - Start to do away with the unnecessarily complex and unitelligible ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from the time when the GPIO subsystem was unmaintained. Archs can now just select GPIOLIB and be done with it, cleanups to arches will trickle in for the next kernel. Some minor archs ACKed the changes immediately so these are included in this pull request. - Advancing the use of the data pointer inside the GPIO device for storing driver data by switching the PowerPC, Super-H Unicore and a few other subarches or subsystem drivers in ALSA SoC, Input, serial, SSB, staging etc to use it. - The initialization now reads the input/output state of the GPIO lines, so that each GPIO descriptor knows - if this callback is implemented - whether the line is input or output. This also reflects nicely in userspace "lsgpio". - It is now possible to name GPIO producer names, line names, from the device tree. (Platform data has been supported for a while). I bet we will get a similar mechanism for ACPI one of those days. This makes is possible to get sensible producer names for e.g. GPIO rails in "lsgpio" in userspace. New drivers: - New driver for the Loongson1. - The XLP driver now supports Broadcom Vulcan ARM64. - The IT87 driver now supports IT8620 and IT8628. - The PCA953X driver now supports Galileo Gen2. Driver improvements: - MCP23S08 was switched to use the gpiolib irqchip helpers and now also suppors level-triggered interrupts. - 74x164 and RCAR now supports the .set_multiple() callback - AMDPT was converted to use generic GPIO. - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994 support the new single ended callback for open drain and in some cases open source. - Implement the .get_direction() callback for a few more drivers like PL061, Xgene. Cleanups: - Paul Gortmaker combed through the drivers and de-modularized those who are not really modules. - Move the GPIO poweroff DT bindings to the power subdir where they belong. - Rename gpio-generic.c to gpio-mmio.c, which is much more to the point. That's what it is handling, nothing more, nothing less" * tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits) MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB gpio: zevio: make it explicitly non-modular gpio: timberdale: make it explicitly non-modular gpio: stmpe: make it explicitly non-modular gpio: sodaville: make it explicitly non-modular pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms gpio: dt-bindings: add wd,mbl-gpio bindings gpio: of: make it possible to name GPIO lines gpio: make gpiod_to_irq() return negative for NO_IRQ gpio: xgene: implement .get_direction() gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver gpio: tegra: Implement gpio_get_direction callback gpio: set up initial state from .get_direction() gpio: rename gpio-generic.c into gpio-mmio.c gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case gpio: dwapb: add gpio-signaled acpi event support gpio: dwapb: convert device node to fwnode gpio: dwapb: remove name from dwapb_port_property gpio/qoriq: select IRQ_DOMAIN ...
2016-04-12Revert "gpio: rcar: Fine-grained Runtime PM support"Linus Walleij1-17/+6
This reverts commit 65194cb174b873448b208eb6e04ecb72237af76e.
2016-04-12Revert "gpio: rcar: Add Runtime PM handling for interrupts"Linus Walleij1-42/+0
This reverts commit b26a719bdba9aa926ceaadecc66e07623d2b8a53.
2016-03-30gpio: rcar: Implement gpiochip.set_multiple()Geert Uytterhoeven1-0/+20
This allows to set multiple outputs using a single register write. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: rcar: Add Runtime PM handling for interruptsGeert Uytterhoeven1-0/+42
The R-Car GPIO driver handles Runtime PM for requested GPIOs only. When using a GPIO purely as an interrupt source, no Runtime PM handling is done, and the GPIO module's clock may not be enabled. To fix this: - Add .irq_request_resources() and .irq_release_resources() callbacks to handle Runtime PM when an interrupt is requested, - Add irq_bus_lock() and sync_unlock() callbacks to handle Runtime PM when e.g. disabling/enabling an interrupt, or configuring the interrupt type. Fixes: d5c3d84657db57bd "net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS" Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: rcar: use gpiochip data pointerLinus Walleij1-21/+12
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-11gpio: rcar: Improve clock error handling and reportingGeert Uytterhoeven1-1/+10
If the Renesas R-Car GPIO driver cannot find a functional clock, it prints a warning, .e.g. gpio_rcar ffc40000.gpio: unable to get clock and continues, as the clock is optional, depending on the SoC type. This warning may confuse users. To fix this, add a flag to indicate that the clock is mandatory or optional: - If the clock is mandatory (on R-Car Gen2 and Gen3), a missing clock is now treated as a fatal error, - If the clock is optional (on R-Car Gen1), the warning is no longer printed. Suggested-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-11gpio: rcar: Remove obsolete platform data supportGeert Uytterhoeven1-51/+26
Since commit 4baadb9e05c68962 ("ARM: shmobile: r8a7778: remove obsolete setup code"), Renesas R-Car SoCs are only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to use platform data anymore, hence remove platform data configuration. Make gpio_rcar_priv.has_both_edge_trigger a boolean for consistency with gpio_rcar_info.has_both_edge_trigger. Move gpio_rcar_priv.irq_parent down while we're at it, to prevent gaps on 64-bit. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-1/+1
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27gpio: rcar: Add r8a7795 (R-Car H3) supportUlrich Hecht1-0/+4
R-Car Gen3's GPIO blocks are identical to Gen2's in every respect. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16gpio: rcar: Fine-grained Runtime PM supportGeert Uytterhoeven1-4/+16
Currently gpio modules are runtime-resumed at probe time. This means the gpio module will be active all the time (except during system suspend, if not configured as a wake-up source). While an R-Car Gen2 gpio module retains pins configured for output at the requested level while put in standby mode, gpio registercannot be accessed while suspended. Unfortunately pm_runtime_get_sync() cannot be called from all contexts where gpio register access is needed. Hence move the Runtime PM handling from probe/remove time to gpio request/free time, which is probably the best we can do. On r8a7791/koelsch, gpio modules 0, 1, 3, and 4 are now suspended during normal use (gpio2 is used for LEDs and regulators, gpio5 for keys, gpio6 for SD-Card CD & WP, gpio7 for keys and regulators). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01gpio: rcar: Check for irq_set_irq_wake() failuresGeert Uytterhoeven1-2/+11
If an interrupt controller doesn't support wake-up configuration, irq_set_irq_wake() returns an error code. Then any subsequent call trying to deconfigure wake-up will cause an imbalance, and a warning will be printed: WARNING: CPU: 1 PID: 1341 at kernel/irq/manage.c:540 irq_set_irq_wake+0x9c/0xf8() Unbalanced IRQ 26 wake disable To fix this, refrain from any further parent interrupt controller (de)configuration if irq_set_irq_wake() failed. Alternative fixes would be: - calling "gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE)" from the platform code, - setting "gic_chip.flags = IRQCHIP_SKIP_SET_WAKE" in the GIC driver code, but these were withheld as the GIC hardware doesn't really support wake-up interrupts. Fixes: ab82fa7da4dce5c7 ("gpio: rcar: Prevent module clock disable when wake-up is enabled") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-26gpio: rcar: Prevent module clock disable when wake-up is enabledGeert Uytterhoeven1-2/+31
When the GPIO module is needed for wake-up, it's module clock must not be disabled. Hence implement irq_chip.irq_set_wake(), which increments/decrements the clock's enable_count when needed, and forwards the wake-up state to the upstream interrupt controller. This fixes wake-up from s2ram using gpio-keys when using a PM Domain to manage the module clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-26gpio: rcar: Add more register documentationGeert Uytterhoeven1-12/+12
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-26gpio: rcar: Use local variable gpio_chip in gpio_rcar_probe()Geert Uytterhoeven1-3/+3
The existing variable gpio_chip already points to the gpiochip instance, hence use it everywhere. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15gpio: rcar: Switch to use gpiolib irqchip helpersGeert Uytterhoeven1-46/+23
Switch the R-Car Gen2 GPIO driver to use the gpiolib irqchip helpers. While doing this also make sure that gpiochip_irqchip_add() is called after the gpiochip itself is registered, as required. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15gpio: rcar: Fix error path for devm_kzalloc() failureGeert Uytterhoeven1-4/+2
If the call to devm_kzalloc() fails, nothing must be cleant up. This was missed before because gpio_rcar_probe() had a "return" statement after the first "goto err0". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: df0c6c80232f2ad4 ("gpio: rcar: Add minimal runtime PM support") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-11-27gpio: rcar: Add r8a7793 and r8a7794 supportHisashi Nakamura1-9/+18
The device tree probing for R-Car M2-N (r8a7793) and R-Car E2 (r8a7794) is added. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-09Merge tag 'gpio-v3.17-1' of ↵Linus Torvalds1-6/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO update from Linus Walleij: "This is the bulk of GPIO changes for the v3.17 development cycle, and this time we got a lot of action going on and it will continue: - The core GPIO library implementation has been split up in three different files: - gpiolib.c for the latest and greatest and shiny GPIO library code using GPIO descriptors only - gpiolib-legacy.c for the old integer number space API that we are phasing out gradually - gpiolib-sysfs.c for the sysfs interface that we are not entirely happy with, but has to live on for ABI compatibility - Add a flags argument to *gpiod_get* functions, with some backward-compatibility macros to ease transitions. We should have had the flags there from the beginning it seems, now we need to clean up the mess. There is a plan on how to move forward here devised by Alexandre Courbot and Mark Brown - Split off a special <linux/gpio/machine.h> header for the board gpio table registration, as per example from the regulator subsystem - Start to kill off the return value from gpiochip_remove() by removing the __must_check attribute and removing all checks inside the drivers/gpio directory. The rationale is: well what were we supposed to do if there is an error code? Not much: print an error message. And gpiolib already does that. So make this function return void eventually - Some cleanups of hairy gpiolib code, make some functions not to be used outside the library private and make sure they are not exported, remove gpiod_lock/unlock_as_irq() as the existing function is for driver-internal use and fine as it is, delete gpio_ensure_requested() as it is not meaningful anymore - Support the GPIOF_ACTIVE_LOW flag from gpio_request_one() function calls, which is logical since this is already supported when referencing GPIOs from e.g. device trees - Switch STMPE, intel-mid, lynxpoint and ACPI (!) to use the gpiolib irqchip helpers cutting down on GPIO irqchip boilerplate a bit more - New driver for the Zynq GPIO block - The usual incremental improvements around a bunch of drivers - Janitorial syntactic and semantic cleanups by Jingoo Han, and Rickard Strandqvist especially" * tag 'gpio-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (37 commits) MAINTAINERS: update GPIO include files gpio: add missing includes in machine.h gpio: add flags argument to gpiod_get*() functions MAINTAINERS: Update Samsung pin control entry gpio / ACPI: Move event handling registration to gpiolib irqchip helpers gpio: lynxpoint: Convert to use gpiolib irqchip gpio: split gpiod board registration into machine header gpio: remove gpio_ensure_requested() gpio: remove useless check in gpiolib_sysfs_init() gpiolib: Export gpiochip_request_own_desc and gpiochip_free_own_desc gpio: move gpio_ensure_requested() into legacy C file gpio: remove gpiod_lock/unlock_as_irq() gpio: make gpiochip_get_desc() gpiolib-private gpio: simplify gpiochip_export() gpio: remove export of private of_get_named_gpio_flags() gpio: Add support for GPIOF_ACTIVE_LOW to gpio_request_one functions gpio: zynq: Clear pending interrupt when enabling a IRQ gpio: drop retval check enforcing from gpiochip_remove() gpio: remove all usage of gpio_remove retval in driver/gpio devicetree: Add Zynq GPIO devicetree bindings documentation ...
2014-07-22gpio: remove all usage of gpio_remove retval in driver/gpioabdoulaye berthe1-4/+1
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-15gpio: rcar: Add support for DT IRQ flagsLaurent Pinchart1-0/+1
The gpio-rcar driver has no IRQ domain OF xlate function and thus ignores IRQ flags specified in DT. Fix this by using the two-cell xlate function. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09gpio: rcar: clamp returned value to [0,1]Jürg Billeter1-2/+2
While it will be clamped to bool by gpiolib, let's make this sane in the driver as well. Signed-off-by: Jürg Billeter <j@bitron.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: rcar: remove unnecessary OOM messagesJingoo Han1-1/+0
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-28gpio: rcar: Add minimal runtime PM supportGeert Uytterhoeven1-0/+8
This is just enough to automatically enable the functional clock, if present. Clock management during suspend/resume is still to be added. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-gpio@vger.kernel.org Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-29gpio: rcar: Add helper variable dev = &pdev->devGeert Uytterhoeven1-16/+16
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-gpio@vger.kernel.org Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-21Merge tag 'gpio-v3.14-1' of ↵Linus Torvalds1-16/+45
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO tree bulk changes from Linus Walleij: "A big set this merge window, as we have much going on in this subsystem. The changes to other subsystems (notably a slew of ARM machines as I am doing away with their custom APIs) have all been ACKed to the extent possible. Major changes this time: - Some core improvements and cleanups to the new GPIO descriptor API. This seems to be working now so we can start the exodus to this API, moving gradually away from the global GPIO numberspace. - Incremental improvements to the ACPI GPIO core, and move the few GPIO ACPI clients we have to the GPIO descriptor API right *now* before we go any further. We actually managed to contain this *before* we started to litter the kernel with yet another hackish global numberspace for the ACPI GPIOs, which is a big win. - The RFkill GPIO driver and all platforms using it have been migrated to use the GPIO descriptors rather than fixed number assignments. Tegra machine has been migrated as part of this. - New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x. Those should be really good examples of how I expect a nice GPIO driver to look these days. - Do away with custom GPIO implementations on a major part of the ARM machines: ks8695, lpc32xx, mv78xx0. Make a first step towards the same in the horribly convoluted Samsung S3C include forest. We expect to continue to clean this up as we move forward. - Flag GPIO lines used for IRQ on adnp, bcm-kona, em, intel-mid and lynxpoint. This makes the GPIOlib core aware that a certain GPIO line is used for IRQs and can then enforce some semantics such as disallowing a GPIO line marked as in use for IRQ to be switched to output mode. - Drop all use of irq_set_chip_and_handler_name(). The name provided in these cases were just unhelpful tags like "mux" or "demux". - Extend the MCP23s08 driver to handle interrupts. - Minor incremental improvements for rcar, lynxpoint, em 74x164 and msm drivers. - Some non-urgent bug fixes here and there, duplicate #includes and that usual kind of cleanups" Fix up broken Kconfig file manually to make this all compile. * tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits) gpio: mcp23s08: fix casting caused build warning gpio: mcp23s08: depend on OF_GPIO gpio: mcp23s08: Add irq functionality for i2c chips ARM: S5P[v210|c100|64x0]: Fix build error gpio: pxa: clamp gpio get value to [0,1] ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h> ARM: S3C[24|64]xx: move includes back under <mach/> scope Documentation / ACPI: update to GPIO descriptor API gpio / ACPI: get rid of acpi_gpio.h gpio / ACPI: register to ACPI events automatically mmc: sdhci-acpi: convert to use GPIO descriptor API ARM: s3c24xx: fix build error gpio: f7188x: set can_sleep attribute gpio: samsung: Update documentation gpio: samsung: Remove hardware.h inclusion gpio: xtensa: depend on HAVE_XTENSA_GPIO32 gpio: clps711x: Enable driver compilation with COMPILE_TEST gpio: clps711x: Use of_match_ptr() net: rfkill: gpio: convert to descriptor-based GPIO interface leds: s3c24xx: Fix build failure ...
2013-12-12gpio: rcar: Fix level interrupt handlingValentine Barshak1-1/+2
According to the manual, if a port is set for level detection using the corresponding bit in the edge/level select register and an external level interrupt signal is asserted, the corresponding bit in INTDT does not use the FF to hold the input. Thus, writing 1 to the corresponding bits in INTCLR cannot clear the corresponding bits in the INTDT register. Instead, when an external input signal is stopped, the corresponding bit in INTDT is cleared automatically. Since the INTDT bit cannot be cleared for the level interrupts until the interrupt signal is stopped, we end up with the infinite loop when using deferred (threaded) IRQ handling. Since a deferred interrupt is disabled by the low-level handler and re-enabled only when the deferred handler is completed, Fix the issue by dropping disabled interrupts from the pending mask as suggested by Laurent Pinchart <laurent.pinchart@ideasonboard.com> Changes in V2: * Drop disabled interrupts from pending mask altogether instead of dropping level interrupts one by one once they get handled. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-09Merge tag 'v3.13-rc3' into develLinus Walleij1-1/+1
Linux 3.13-rc3
2013-12-03gpio: rcar: Support both edge trigger with DTLaurent Pinchart1-13/+43
Some versions of the R-Car GPIO controller support triggering on both edges of the input signal. Whether this capability is supported is currently specified in platform data. R-Car GPIO devices instantiated from the device tree have the capability turned off even when the hardware supports it. To fix this, add DT match data support to the driver, initialize both edge trigger support from match data and enable both edge trigger in r8a7790 and r8a7791 match data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: rcar: Enable mask on suspendMagnus Damm1-1/+2
Now when lazy interrupt disable has been enabled in the driver then extend the code to set IRQCHIP_MASK_ON_SUSPEND which tells the core that only IRQs marked as wakeups need to stay enabled during Suspend-to-RAM. Tested on the Lager board with GPIO-keys and Suspend-to-RAM. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: rcar: Use lazy disableMagnus Damm1-2/+0
Set the ->irq_enable() and ->irq_disable() methods to NULL to enable lazy disable of interrupts. This by itself provides some level of optimization, but is mainly enabled as ground work for future Suspend-to-RAM wake up support. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: rcar: NULL dereference on error in probe()Dan Carpenter1-1/+1
It's not obvious from the label name but "err1" tries to release "p->irq_domain" which leads to a NULL dereference. Fixes: 119f5e448d32 ('gpio: Renesas R-Car GPIO driver V3') Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-16gpio: rcar: Include linux/of.h headerSachin Kamat1-0/+1
'of_match_ptr' is defined in linux/of.h. Include it explicitly to avoid build breakage in the future. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-16Merge tag 'v3.12-rc4' into develLinus Walleij1-4/+3
Linux 3.12-rc4