summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2014-07-24Merge tag 'pinctrl-v3.16-3' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here are three pin control fixes for the v3.16 series. Sorry that some of these arrive late, the summer heat in Sweden makes me slow. - an IRQ handling fix for the STi driver, also for stable - another IRQ fix for the RCAR GPIO driver - a MAINTAINERS entry" * tag 'pinctrl-v3.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: gpio: rcar: Add support for DT IRQ flags MAINTAINERS: Add entry for the Renesas pin controller driver pinctrl: st: Fix irqmux handler
2014-07-15gpio: rcar: Add support for DT IRQ flagsLaurent Pinchart1-0/+1
The gpio-rcar driver has no IRQ domain OF xlate function and thus ignores IRQ flags specified in DT. Fix this by using the two-cell xlate function. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-05gpio: mcp23s08: Eliminates redundant checking.Michael Welling1-6/+0
Unnecessary checking was added during the merge of the gpio branch. This patch removes the extra unnecessary checking. Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-12gpio: of: Fix handling for deferred probe for -gpio suffixTony Lindgren1-1/+1
Commit dd34c37aa3e (gpio: of: Allow -gpio suffix for property names) added parsing for both -gpio and -gpios suffix but also changed the handling for deferred probe unintentionally. Because of the looping the second name will now return -ENOENT instead of -EPROBE_DEFER. Fix the issue by breaking out of the loop if -EPROBE_DEFER is encountered. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-06Merge tag 'mfd-for-linus-3.16' of ↵Linus Torvalds1-13/+5
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next Pull MFD updates from Lee Jones: "Changes to existing drivers: - increase DT coverage: arizona, mc13xxx, stmpe-i2c, syscon, sun6i-prcm - regmap use of and/or clean-up: tps65090, twl6040 - basic renaming: max14577 - use new cpufreq helpers: db8500-prcmu - increase regulator support: stmpe, arizona, wm5102 - reduce legacy GPIO overhead: stmpe - provide necessary remove path: bcm590xx - expand sysfs presence: kempld - move driver specific code out to drivers: rtc-s5m, arizona - clk handling: twl6040 - use managed (devm_*) resources: ipaq-micro - clean-up/remove unused/duplicated code: tps65218, sec, pm8921, abx500-core, db8500-prcmu, menelaus - build/boot/sematic bug fixes: rtsx_usb, stmpe, bcm590xx, abx500, mc13xxx, rdc321x-southbridge, mfd-core, sec, max14577, syscon, cros_ec_spi - constify stuff: sm501, tps65910, tps6507x, tps6586x, max77686, max8997, kempld, max77693, max8907, rtsx_usb, db8500-prcmu, max8998, wm8400, sec, lp3943, max14577, as3711, omap-usb-host, ipaq-micro Support for new devices: - add support for max77836 into max14577 - add support for tps658640 into tps6586x - add support for cros-ec-i2c-tunnel into cros_ec - add new driver for rtsx_usb_sdmmc and rtsx_usb_ms - add new driver for axp20x - add new driver for sun6i-prcm - add new driver for ipaq-micro" * tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (77 commits) mfd: wm5102: Correct default for LDO Control 2 register mfd: menelaus: Use module_i2c_driver mfd: tps65218: Terminate of match table mfd: db8500-prcmu: Remove check for CONFIG_DBX500_PRCMU_DEBUG mfd: ti-keystone-devctrl: Add bindings for device state control mfd: palmas: Format the header file mfd: abx500-core: Remove unused function abx500_dump_all_banks() mfd: arizona: Correct addresses of always-on trigger registers mfd: max14577: Cast to architecture agnostic data type i2c: ChromeOS EC tunnel driver mfd: cros_ec: Sync to the latest cros_ec_commands.h from EC sources mfd: cros_ec: spi: Increase cros_ec_spi deadline from 5ms to 100ms mfd: cros_ec: spi: Make the cros_ec_spi timeout more reliable mfd: cros_ec: spi: Add mutex to cros_ec_spi mfd: cros_ec: spi: Calculate delay between transfers correctly mfd: arizona: Correct error message for addition of main IRQ chip mfd: wm8997: Add registers for high power mode mfd: arizona: Add MICVDD to mapped regulators mfd: ipaq-micro: Make mfd_cell array const mfd: ipaq-micro: Use devm_ioremap_resource() ...
2014-06-03Merge branches 'ib-from-asoc-3.16', 'ib-from-pm-3.16', ↵Lee Jones1-13/+5
'ib-from-regulator-3.16', 'ib-mfd-gpio-3.16' and 'ib-mfd-mmc-memstick-3.16', tags 'ib-mfd-extcon-3.16', 'ib-mfd-omap-3.16' and 'ib-mfd-regulator-3.16' into ibs-for-mfd-merged
2014-06-02Merge tag 'gpio-v3.16-1' of ↵Linus Torvalds44-650/+582
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into next Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v3.16 series. There is a lot of action in the GPIO subsystem doing refactorings and cleanups, almost as many deletions as insertions and minor feature growth and no new drivers this time. Which is actually pretty nice. Some GPIO-related stuff will come in through the pin control tree as well. Details: - We are finalizing and fixing up the gpiochip irqchip helpers bringing a helpful irqchip implementation into the gpiolib core and avoiding duplicate code and, more importantly, duplicate bug fixes: * Support for using the helpers with threaded interrupt handlers as used on sleeping GPIO-irqchips * Do not set up hardware triggers for edges or levels if the default IRQ type is IRQ_TYPE_NONE - some drivers would exploit the fact that you could get default initialization of the IRQ type from the core at probe() but if no default type is set up from the helper, we should not call the driver to configure anything. Wait until a consumer requests the interrupt instead. * Make the irqchip helpers put the GPIO irqs into their own lock class. The GPIO irqchips can often emit (harmless, but annoying) lockdep warnings about recursions when they are in fact just cascaded IRQs. By putting them into their own lock class we help the lockdep core to keep track of things. * Switch the tc3589x GPIO expanders to use the irqchip helpers * Switch the OMAP GPIO driver to use the irqchip helpers * Add some documentation for the irqchip helpers * select IRQ_DOMAIN when using the helpers since some platforms may not be using this by default and it's a strict dependency. - Continued GPIO descriptor refactoring: * Remove the one instance of gpio_to_desc() from the device tree code, making the OF GPIO code use GPIO descriptors only. * Introduce gpiod_get_optional() and gpiod_get_optional_index() akin to the similar regulator functions for cases where the use of GPIO is optional and not strictly required. * Make of_get_named_gpiod_flags() private - we do not want to unnecessarily expose APIs to drivers that make the gpiolib harder than necessary to maintain and refactor. Privatize this function. - Support "-gpio" suffix for the OF GPIO retrieveal path. We used to look for "foo-gpios" or just "gpios" in device tree nodes, but it turns out that some drivers with a single GPIO line will just state "foo-gpio" (singularis). Sigh. Support this with a fallback looking for it, as this simplifies driver code and handles it in core code. - Switch the ACPI GPIO core to fetch GPIOs with the *_cansleep function variants as the GPIO operation region handler can sleep, and shall be able to handle gpiochips that sleep. - Tons of cleanups and janitorial work from Jingoo Han, Axel Lin, Javier Martinez Canillas and Abdoulaye Berthe. Notably Jingoo cut off a ton of pointless OOM messages. - Incremental development and fixes for various drivers, nothing really special here" * tag 'gpio-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits) gpio: select IRQ_DOMAIN for gpiolib irqchip helpers gpio: pca953x: use gpiolib irqchip helpers gpio: pcf857x: Add IRQF_SHARED when request irq gpio: pcf857x: Avoid calling irq_domain_cleanup twice gpio: mcp23s08: switch chip count to int gpio: dwapb: use a second irq chip gpio: ep93xx: Use devm_ioremap_resource() gpio: mcp23s08: fixed count variable for devicetree probing gpio: Add run-time dependencies to R-Car driver gpio: pch: add slab include Documentation / ACPI: Fix location of GPIO documentation gpio / ACPI: use *_cansleep version of gpiod_get/set APIs gpio: generic: add request function pointer gpio-pch: Fix Kconfig dependencies gpio: make of_get_named_gpiod_flags() private gpio: gpioep93xx: use devm functions gpio: janzttl: use devm function gpio: timberdale: use devm functions gpio: bt8xx: use devm function for memory allocation gpio: include linux/bug.h in interface header ...
2014-05-29gpio: select IRQ_DOMAIN for gpiolib irqchip helpersLinus Walleij1-1/+2
These helpers depend on the IRQ_DOMAIN so select it explicitly, as it will not be present on all platforms such as Intel desktops and laptops using Intel-MID. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-28gpio: pca953x: use gpiolib irqchip helpersLinus Walleij2-61/+33
This switches the PCA953x driver over to using the gpiolib irqchip helpers to handle the threaded interrups cascaded off this GPIO chip. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-28gpio: pcf857x: Add IRQF_SHARED when request irqGeorge Cherian1-1/+1
It's quite possible that multiple pcf857x can be hooked up to the same interrupt line with the processor. So add IRQF_SHARED in request irq.. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-28gpio: pcf857x: Avoid calling irq_domain_cleanup twiceGeorge Cherian1-4/+5
Currently irq_domain_cleanup is called twice if irq_domain_init fails. This causes the following crash. Unable to handle kernel paging request at virtual address 00100104 pgd = c0004000 [00100104] *pgd=00000000 Internal error: Oops: 805 [#1] SMP ARM Modules linked in: CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 3.12.15-01889-gedd10a8-dirty #4 Workqueue: deferwq deferred_probe_work_func task: ed0ee800 ti: ed116000 task.ti: ed116000 PC is at irq_domain_remove+0x3c/0x8c LR is at 0x0 pc : [<c0089734>] lr : [<00000000>] psr: a0000013 sp : ed117b50 ip : 00100100 fp : ed117b64 r10: ed5d1a04 r9 : 00000008 r8 : 00000000 r7 : ffffffea r6 : ed5d1a20 r5 : ed5d1a00 r4 : ed5e7540 r3 : 00200200 r2 : 00100100 r1 : c08aa180 r0 : 00200200 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 8000406a DAC: 00000017 Process kworker/u4:0 (pid: 6, stack limit = 0xed116248) Stack: (0xed117b50 to 0xed118000) 7b40: 0000016b ed5d5f10 ed117b74 ed117b68 7b60: c02c8910 c0089704 ed117bb4 ed117b78 c02c8e14 c02c8900 ed5d1a04 ed5d4e80 ... <snip> ... fe0: 00000000 00000000 00000000 00000000 00000013 00000000 384a13ea 1590210a Backtrace: [<c00896f8>] (irq_domain_remove+0x0/0x8c) from [<c02c8910>] (pcf857x_irq_domain_cleanup+0x1c/0x20) r4:ed5d5f10 r3:0000016b [<c02c88f4>] (pcf857x_irq_domain_cleanup+0x0/0x20) from [<c02c8e14>] (pcf857x_probe+0x2a8/0x364) [<c02c8b6c>] (pcf857x_probe+0x0/0x364) from [<c04787ac>] (i2c_device_probe+0x80/0xc0) [<c047872c>] (i2c_device_probe+0x0/0xc0) from [<c036c33c>] (driver_probe_device+0x104/0x240) r6:00000000 r5:ed5d1a20 r4:c08c709c r3:c047872c [<c036c238>] (driver_probe_device+0x0/0x240) from [<c036c558>] (__device_attach+0x48/0x4c) r7:ed4fc480 r6:c036c510 r5:ed5d1a20 r4:c0866bb8 [<c036c510>] (__device_attach+0x0/0x4c) from [<c036a6d8>] (bus_for_each_drv+0x4c/0x94) r5:ed5d1a20 r4:00000000 [<c036a68c>] (bus_for_each_drv+0x0/0x94) from [<c036c1f4>] (device_attach+0x78/0x90) r6:c087fe50 r5:ed5d1a54 r4:ed5d1a20 [<c036c17c>] (device_attach+0x0/0x90) from [<c036b76c>] (bus_probe_device+0x8c/0xb4) r6:c087fe50 r5:ed5d1a20 r4:ed5d1a20 r3:ed17e1c0 [<c036b6e0>] (bus_probe_device+0x0/0xb4) from [<c0369888>] (device_add+0x34c/0x624) r6:ed5d1a28 r5:00000000 r4:ed5d1a20 r3:fffffffe [<c036953c>] (device_add+0x0/0x624) from [<c0369b7c>] (device_register+0x1c/0x20) ... <snip> ... [<c0060844>] (process_one_work+0x0/0x37c) from [<c0061040>] (worker_thread+0x13c/0x3c4) [<c0060f04>] (worker_thread+0x0/0x3c4) from [<c00670ec>] (kthread+0xac/0xb8) [<c0067040>] (kthread+0x0/0xb8) from [<c00148b8>] (ret_from_fork+0x14/0x3c) r7:00000000 r6:00000000 r5:c0067040 r4:ed105d20 Code: e59fc04c e591e000 e59f0048 e154000e (e5823004) ---[ end trace 59dd1e90032c4217 ]--- Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-28gpio: mcp23s08: switch chip count to intLinus Walleij1-1/+1
Commit 3e3bed913e8bbd78f38cefd5d575475f45c05dd0 "gpio: mcp23s08: fixed count variable for devicetree probing" introduced a loop check to see if the number of chips were unconsistent and going below zero counting downwards, but this requires the counting variable to be able to be negative, so switch the variable from unsigned to int. Cc: Michael Stickel <ms@mycable.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-27gpio: dwapb: use a second irq chipSebastian Andrzej Siewior1-13/+22
Right new have one irq chip running always in level mode. It would nicer to have two irq chips where one is handling level type interrupts and the other one is doing edge interrupts. So we can have at runtime two users where one is using edge and the other level. Acked-by: Alan Tull <delicious.quinoa@gmail.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-27gpio: ep93xx: Use devm_ioremap_resource()Jingoo Han1-1/+1
Use devm_ioremap_resource() because devm_request_and_ioremap() is obsoleted by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-27gpio: mcp23s08: fixed count variable for devicetree probingMichael Stickel1-1/+10
Fixed missing increase of count variable for devicetree path in driver probing. The gpio-mcp23s08 driver has two paths for getting the platform registration information. One for the classic platform initialization and one for openfirmware devicetree based initialization. The devicetree based path is missing the increase of the count variable, which results in the count variable to become negative in the later use, where it is decreased. The count variable is used as an index into a vector. This results in accessing invalid memory space and can result in an exception. Tested this with an AM3352 SoC with two mcp23s17 on two chip selects as well as on a shared chip select. Signed-off-by: Michael Stickel <ms@mycable.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-27gpio: Add run-time dependencies to R-Car driverJean Delvare1-1/+1
The Renesas R-Car GPIO driver is only useful on shmobile unless build testing. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Magnus Damm <damm@opensource.se> Cc: Alexandre Courbot <gnurou@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-27gpio: pch: add slab includeLinus Walleij1-0/+1
After change 3ff35cbcfa4bc7d7dbdd0279e32ea677567ded02 "gpio-pch: Fix Kconfig dependencies" which enabled COMPILE_TEST as an alternative for the PCH driver, we get build failures like this: drivers/gpio/gpio-pch.c: In function 'pch_gpio_probe': drivers/gpio/gpio-pch.c:359:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration] drivers/gpio/gpio-pch.c:359:7: warning: assignment makes pointer from integer without a cast [enabled by default] drivers/gpio/gpio-pch.c:442:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] Fix this by including <linux/slab.h> explicitly. Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-23gpio / ACPI: use *_cansleep version of gpiod_get/set APIsAaron Lu1-2/+3
The GPIO operation region handler should be called where sleep is allowed, so we should use the *_cansleep version of gpiod_get/set APIs or we will get a warning message complaining invalid context if the GPIO chip has the cansleep flag set. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-23gpio: generic: add request function pointerAnthony Fee1-0/+9
gpiolib will require all gpio drivers to expicitly set the request function pointer in the future. To encourage gpio driver developers to adhere to this standard gpio-generic.c now sets this function pointer. Signed-off-by: Anthony Fee <anthony.fee@emutex.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-23gpio-pch: Fix Kconfig dependenciesJean Delvare1-1/+1
The gpio-pch driver is for a companion chip to the Intel Atom E600 series processors. These are 32-bit x86 processors so the driver is only needed on X86_32. Add COMPILE_TEST as an alternative, so that the driver can still be build-tested elsewhere. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-23mfd: stmpe: root out static GPIO and IRQ assignmentsLinus Walleij1-13/+5
The only platform using the STMPE expander now boots from device tree using all-dynamic GPIO and IRQ number assignments, so remove the mechanism to pass this from the device tree entirely. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-21gpio: make of_get_named_gpiod_flags() privateAlexandre Courbot2-0/+19
of_get_named_gpiod_flags() is visible and directly usable by GPIO consumers, but it really should not as the gpiod interface relies on the simpler gpiod_get() to provide properly-configured GPIOs. of_get_named_gpiod_flags() is just used internally by gpiolib to implement gpiod_get(), and by the old of_get_named_gpio_flags() function, therefore it makes sense to make it gpiolib-private. As a side-effect, the unused (and unneeded) of_get_gpiod_flags() inline function is also removed, and of_get_named_gpio_flags() is moved from a static inline function to a regular one in gpiolib-of.c This results in all references to gpiod_* functions in of_gpio.h being gone, which is the way it should be since this file is part of the old integer GPIO interface. Changes since v1: - Fixed compilation error when CONFIG_OF_GPIO is not defined - Fixed warning due to of_gpio_flags enum not being declared in private gpiolib.h header Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-16gpio: gpioep93xx: use devm functionsabdoulaye berthe1-27/+7
This uses devm functions for mem allocation Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-16gpio: janzttl: use devm functionabdoulaye berthe1-29/+8
This uses dem function for mem allocation Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-16gpio: timberdale: use devm functionsabdoulaye berthe1-31/+16
This eases memory allocation and provides appropriate logging. Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-16gpio: bt8xx: use devm function for memory allocationabdoulaye berthe1-13/+6
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-16gpio: omap: prepare and unprepare the debounce clockRajendra Nayak1-5/+5
Replace the clk_enable()s with a clk_prepare_enable() and the clk_disables()s with a clk_disable_unprepare() This never showed issues due to the OMAP platform code (hwmod) leaving these clocks in clk_prepare()ed state by default. Reported-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: Add helpers for optional GPIOsThierry Reding2-0/+86
Introduce gpiod_get_optional() and gpiod_get_index_optional() helpers that make it easier for drivers to handle optional GPIOs. Currently in order to handle optional GPIOs, a driver needs to special case error handling for -ENOENT, such as this: gpio = gpiod_get(dev, "foo"); if (IS_ERR(gpio)) { if (PTR_ERR(gpio) != -ENOENT) return PTR_ERR(gpio); gpio = NULL; } if (gpio) { /* set up GPIO */ } With these new helpers the above is reduced to: gpio = gpiod_get_optional(dev, "foo"); if (IS_ERR(gpio)) return PTR_ERR(gpio); if (gpio) { /* set up GPIO */ } While at it, device-managed variants of these functions are also provided. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: pca953x: request a shared interruptToby Smith1-1/+2
Request a shared interrupt when requesting a pca953x GPIO interrupt Signed-off-by: Toby Smith <toby@tismith.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: pca953x: return IRQ_NONE when appropriateToby Smith1-2/+4
The irq handler should return IRQ_NONE or IRQ_HANDLED to report if we have handled the interrupt. Signed-off-by: Toby Smith <toby@tismith.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: mvebu: Remove initcall-based driver initializationEzequiel Garcia1-6/+1
There's no reason to use an initcall to initialize this driver, and regular module_platform_driver() can be used instead. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: zevio: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: xilinx: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: tegra: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: palmas: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: mvebu: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: mcp23s08: Make of_device_id array constJingoo Han1-2/+2
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: grgpio: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: zevio: remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: tps65910: remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: tps6586x: remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: tegra: remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: SPEAr: remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: rdc321x: remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: rcar: remove unnecessary OOM messagesJingoo Han1-1/+0
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: rc5t583: remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: palmas: remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: mvebu: remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: moxart: remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: lynxpoint: remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>