Age | Commit message (Collapse) | Author | Files | Lines |
|
Rearrange entries in Kconfig and Makefile alphabetically to make room
for additional KUnit test suites.
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115103537.220760-1-marpagan@redhat.com
|
|
This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Currently, the DRM GPUVM does not have any core dependencies preventing
a module build.
Also, new features from subsequent patches require helpers (namely
drm_exec) which can be built as module.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920144343.64830-3-dakr@redhat.com
|
|
As a result of the recent Kconfig reworks, the default settings for the
framebuffer interfaces changed in unexpected ways:
Configurations that leave CONFIG_FB disabled but use DRM now get
DRM_FBDEV_EMULATION by default. This also turns on the deprecated /dev/fb
device nodes for machines that don't actually want it.
In turn, configurations that previously had DRM_FBDEV_EMULATION enabled
now only get the /dev/fb front-end but not the more useful framebuffer
console, which is not selected any more.
We had previously decided that any combination of the three frontends
(FB_DEVICE, FRAMEBUFFER_CONSOLE and LOGO) should be selectable, but the
new default settings mean that a lot of defconfig files would have to
get adapted.
Change the defaults back to what they were in Linux 6.5:
- Leave DRM_FBDEV_EMULATION turned off unless CONFIG_FB
is enabled. Previously this was a hard dependency but now the two are
independent. However, configurations that enable CONFIG_FB probably
also want to keep the emulation for DRM, while those without FB
presumably did that intentionally in the past.
- Leave FB_DEVICE turned off for FB=n. Following the same
logic, the deprecated option should not automatically get enabled
here, most users that had FB turned off in the past do not want it,
even if they want the console
- Turn the FRAMEBUFFER_CONSOLE option on if
DRM_FBDEV_EMULATION is set to avoid having to change defconfig
files that relied on it being selected unconditionally in the past.
This also makes sense since both LOGO and FB_DEVICE are now disabled
by default for builds without CONFIG_FB, but DRM_FBDEV_EMULATION
would make no sense if all three are disabled.
Fixes: a5ae331edb02b ("drm: Drop select FRAMEBUFFER_CONSOLE for DRM_FBDEV_EMULATION")
Fixes: 701d2054fa317 ("fbdev: Make support for userspace interfaces configurable")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230911205338.2385278-1-arnd@kernel.org
|
|
Satisfy MMU dependency when testing TTM with KUnit. This fixes
compilation errors on platforms that don't select this option
by default.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308110133.f0lhFwMV-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202308111032.enU8IisR-lkp@intel.com/
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811113649.697886-1-karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit 78f46ecd9be8ec85a177c15d6188e1555657ba86)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Satisfy MMU dependency when testing TTM with KUnit. This fixes
compilation errors on platforms that don't select this option
by default.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308110133.f0lhFwMV-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202308111032.enU8IisR-lkp@intel.com/
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811113649.697886-1-karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Add the initial version of unit tests for ttm_device struct, together
with helper functions.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d1cc45c8a0cf536b92a850e0025f6c555de0169.1691487006.git.karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
The commit c242f48433e7 ("drm: Make FB_CORE to be selected if DRM fbdev
emulation is enabled") changed DRM_FBDEV_EMULATION from 'depends on FB'
to an effective 'select FB_CORE', so any config that previously had DRM=y
and FB=n now has FB_CORE=y and FRAMEBUFFER_CONSOLE=y.
This leads to unmet direct dependencies detected for FRAMEBUFFER_CONSOLE
as reported by Arthur Grillo, e.g:
WARNING: unmet direct dependencies detected for FRAMEBUFFER_CONSOLE
Depends on [n]: VT [=n] && FB_CORE [=y] && !UML [=y]
Selected by [y]:
- DRM_FBDEV_EMULATION [=y] && HAS_IOMEM [=y] && DRM [=y] && !EXPERT [=n]
Arnd Bergmann suggests to drop the select FRAMEBUFFER_CONSOLE for the
DRM_FBDEV_EMULATION Kconfig symbol, since a possible use case could
be to enable DRM fbdev emulation but without a framebuffer console.
Fixes: c242f48433e7 ("drm: Make FB_CORE to be selected if DRM fbdev emulation is enabled")
Reported-by: Arthur Grillo <arthurgrillo@riseup.net>
Closes: https://lore.kernel.org/dri-devel/20230726220325.278976-1-arthurgrillo@riseup.net
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804125156.1387542-1-javierm@redhat.com
|
|
Change the infix for fbdev's DMA-memory helpers from _DMA_ to
_DMAMEM_. The helpers perform operations within DMA-able memory,
but they don't perform DMA operations. Naming should make this
clear. Adapt all users. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-4-tzimmermann@suse.de
|
|
Change the infix for fbdev's system-memory helpers from _SYS_ to
_SYSMEM_. The helpers perform operations within system memory, but
not on the state of the operating system itself. Naming should make
this clear. Adapt all users. No functional changes.
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-3-tzimmermann@suse.de
|
|
Use fbdev's DMA helpers for fbdev-dma. They are equivalent to the
previously used system-memory helpers, so no functional changes here.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-3-tzimmermann@suse.de
|
|
Now that fbdev core has been split in FB_CORE and FB, make the DRM symbol
to select the FB_CORE option if the DRM fbdev emulation layer is enabled.
This allows to disable the CONFIG_FB option if is not needed, which will
avoid the need to explicitly disable each of the legacy fbdev drivers.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719081544.741051-5-javierm@redhat.com
|
|
Exercise at least all driver facing functions of this new component.
v2: add array test as well
v3: some kunit cleanups
v4: more tests and cleanups
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-3-christian.koenig@amd.com
|
|
This adds the infrastructure for an execution context for GEM buffers
which is similar to the existing TTMs execbuf util and intended to replace
it in the long term.
The basic functionality is that we abstracts the necessary loop to lock
many different GEM buffers with automated deadlock and duplicate handling.
v2: drop xarray and use dynamic resized array instead, the locking
overhead is unnecessary and measurable.
v3: drop duplicate tracking, radeon is really the only one needing that.
v4: fixes issues pointed out by Danilo, some typos in comments and a
helper for lock arrays of GEM objects.
v5: some suggestions by Boris Brezillon, especially just use one retry
macro, drop loop in prepare_array, use flags instead of bool
v6: minor changes suggested by Thomas, Boris and Danilo
v7: minor typos pointed out by checkpatch.pl fixed
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Tested-by: Danilo Krummrich <dakr@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-2-christian.koenig@amd.com
|
|
Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.
For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.
v1 -> v2:
1) Use hpd status reg when polling for ls7a2000.
2) Fix all warnings that emerged when compiling with W=1.
v2 -> v3:
1) Add COMPILE_TEST to Kconfig and make the driver off by default
2) Alphabetical sorting headers (Thomas)
3) Untangle register access functions as much as possible (Thomas)
4) Switch to TTM-based memory manager (Thomas)
5) Add the chip ID detection function which can be used to distinguish
chip models
6) Revise the built-in HDMI phy driver, nearly all main stream mode below
4K@30Hz is tested, and this driver supports clone(mirror) display mode
and extend(joint) display mode.
v3 -> v4:
1) Quickly fix a small mistake.
v4 -> v5:
1) Add per display pipe debugfs support to the builtin HDMI encoder.
v5 -> v6:
1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
2) Fix all typos I could found, make sentences and code more readable
3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
4) Rename this driver as loongson.
v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
during BO creation. Patch V1 ~ V6 of this series no longer work.
Thus, we send V7.
v7 -> v8:
1) Zero a compile warning on a 32-bit platform, compile with W=1
2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
3) Pageflip tested on the virtual terminal with the following commands:
modetest -M loongson -s 32:1920x1080 -v
modetest -M loongson -s 34:1920x1080 -v -F tiles
It works like a charm, when running the pageflip test with dual screens
configuration, another two additional BOs were created by the modetest,
VRAM usage up to 40+ MB, well we have at least 64MB, still enough.
# cat bos
bo[0000]: size: 8112kB VRAM
bo[0001]: size: 16kB VRAM
bo[0002]: size: 16kB VRAM
bo[0003]: size: 16208kB VRAM
bo[0004]: size: 8112kB VRAM
bo[0005]: size: 8112kB VRAM
v8 -> v9:
1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
2) Using pci_get_domain_bus_and_slot to get the GPU device.
v9 -> v10:
1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
the pinned BO could not be moved, the VRAM lost power when sleeping
to RAM. Thus, the data in the buffer who is pinned in VRAM will get
lost when resumed. Yet it's not a big problem because this driver
relies on the CPU to update the front framebuffer. We can see the
garbage data when resume from S3, but the screen will show the right
image as I move the cursor. This is due to the CPU repaint. v10 of
this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
them all to system RAM in lsdc_drm_freeze().
v10 -> v11:
1) On a double-screen case, The buffer object backing the single giant
framebuffer is referenced by two GEM objects; hence, it will be
pinned at least twice by prepare_fb() function. This causes its pin
count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
which is not correct on double-screen case. V11 of this patch unpin
the BOs until its pin count reaches zero when suspend. Then, we make
the S3 support complete finally. With v11, I can't see any garbage
data when resume.
2) Fix vblank wait timeout when disable CRTC.
3) Test against IGT, at least fbdev test and kms_flip test passed.
4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
5) Drop a few common hardware features description in lsdc_desc (Emil)
6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
create function. (Emil)
7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)
v11 -> v12:
none
v12 -> v13:
1) Add benchmarks to figure out the bandwidth of the hardware platform.
Usage:
# cd /sys/kernel/debug/dri/0/
# cat benchmark
2) VRAM is filled with garbage data if uninitialized, add a buffer
clearing procedure (lsdc_bo_clear), clear the BO on creation time.
3) Update copyrights and adjust coding style (Huacai)
v13 -> v14:
1) Trying to add async update support for cursor plane.
v14 -> v15:
1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
co-exist in the system, more is also possible (Emil and Xuerui)
2) Fix typos and grammar mistakes as much as possible (Xuerui)
3) Unify copyrights as GPL-2.0+ (Xuerui)
4) Fix a bug introduce since V13, TTM may import BO from other drivers,
we shouldn't clear it on such a case.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into drm-next
Renesas DRM/KMS drivers:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602111504.GA24855@pendragon.ideasonboard.com
|
|
Implement dedicated fbdev helpers for framebuffer I/O instead
of using DRM's helpers. Use an fbdev generator macro for
deferred I/O to create the fbdev callbacks. i915 was the only
caller of the DRM helpers, so remove them from the helper module.
i915's fbdev emulation is still incomplete as it doesn't implement
deferred I/O and damage handling for mmaped pages.
v4:
* generate deferred-I/O helpers
* use initializer macros for fb_ops
v2:
* use FB_IO_HELPERS options
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-14-tzimmermann@suse.de
|
|
Implement dedicated fbdev helpers for framebuffer I/O instead
of using DRM's helpers. Use an fbdev generator macro for
deferred I/O to create the callbacks. Fbdev-generic was the
only caller of the DRM helpers, so remove them from the helper
module.
v4:
* generate deferred-I/O helpers
* use initializer macros for fb_ops
v2:
* use FB_SYS_HELPERS_DEFERRED option
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-13-tzimmermann@suse.de
|
|
Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Fbdev-dma does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.
By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.
v4:
* use initializer macros for struct fb_ops
v2:
* use FB_SYS_HELPERS option
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-8-tzimmermann@suse.de
|
|
Create vendor specific renesas directory and move renesas drivers
to that directory.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
Note: Only changes since pull request from 2023-02-23 are included here.
UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
parsing.
Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.
Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.
Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ac1f5186-54bb-02f4-ac56-907f5b76f3de@linux.intel.com
|
|
Backmerging to get v6.3-rc1 and sync with the other DRM trees.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Suballocating a buffer object is something that is not driver-specific
and useful for many drivers.
Use a slightly modified version of amdgpu_sa.c
v2:
- Style cleanups.
- Added / Modified documentation.
- Use u64 for the sizes and offset. The code dates back to 2012 and
using unsigned int will probably soon come back to bite us.
We can consider size_t as well for better 32-bit efficiency.
- Add and document gfp, intr and align arguments to drm_suballoc_new().
- Use drm_printer for debug output.
v3:
- Remove stale author info (Christian König)
v4:
- Avoid 64-bit integer divisions (kernel test robot <lkp@intel.com>)
- Use size_t rather than u64 for the managed range. (Thomas)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224095152.30134-2-thomas.hellstrom@linux.intel.com
|
|
Pull drm updates from Dave Airlie:
"There are a bunch of changes all over in the usual places.
Highlights:
- habanalabs moves from misc to accel
- first accel driver for Intel VPU (Versatile Processing Unit)
inference engine
- dropped all the ancient legacy DRI1 drivers. I think it's been at
least 10 years since anyone has heard about these.
- Intel DG2 updates and prelim Meteorlake enablement
- etnaviv adds support for Versilicon NPU device (a GPU like engine
with inference accelerators)
Detailed summary:
Removals:
- remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via
New driver:
- intel VPU accelerator driver
- habanalabs comes via drm tree now
drm/core:
- use drm_dbg_ helpers in several places
- Document defaults for CRTC backgrounds
- Document use of drm_minor
edid:
- improve mode parsing and refactoring
connector:
- support analog TV mode property
media:
- add some common formats
udmabuf:
- add vmap/vunmap methods
fourcc:
- add XRGB1555 and RGB565 formats
- document open source user waiver
firmware:
- fix color-format selection for system framebuffer
format-helper:
- Add conversion from XRGB8888 to various sysfb formats
- Make XRGB8888 the only driver-emulated legacy format
- Add conversion from XRGB8888 to XBGR8888 and ABGR8888
fb-helper:
- fix preferred depth and bpp values across drivers
- Avoid blank consoles from selecting an incorrect color format
probe-helper:
- Enable/disable HPD on connectors
scheduler:
- Fix lockup in drm_sched_entity_kill()
- Deprecate drm_sched_resubmit_jobs()
bridge:
- remove unused functions
- implement i2c probe_new in various drivers
- ite-it6505: Locking fixes, Cache EDID data
- ite-it66121: Support IT6610 chip
- lontium-tl9611: Fix HDMI on DragonBoard 845c
- parade-ps8640: Use atomic bridge functions
- Support i.MX93 LDB plus DT bindings
debugfs:
- add per device helpers and convert drivers
displayport:
- mst fixes
- add DP adaptive sync DPCD definitions
fbdev:
- always pick 32bpp as default
- remove some unused code
simpledrm:
- support system memory framebuffers
panel:
- add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
- Use ktime_get_boottime() to measure power-down delay
- Fix auto-suspend delay
- Visionox VTDR6130 AMOLED DSI
- Support Himax HX8394
- Convert many drivers to common generic DSI write-sequence helper
- AUO A030JTN01
ttm:
- drop bo wait wrapper
- fix MIPS build
habanalabs:
- moved driver to accel subsystem
- gaudi2 decoder error improvement
- more trace events
- Gaudi2 abrupt reset by firmware support
- add uAPI to flush memory transactions
- add uAPI to pass through userspace reqs to fw
- remove dma-buf export by handle
amdgpu:
- add new INFO queries for peak and min sclk/mclk for profile modes
- Add PCIe info to the INFO IOCTL
- secure display support for multiple displays
- DML optimizations
- DCN 3.2 updates
- PSR updates
- DP 2.1 updates
- SR-IOV RAS updates
- VCN RAS support
- SMU 13.x updates
- Switch 1 element arrays to flexible arrays
- Add RAS support for DF 4.3
- Stack size improvements
- S0ix rework
- Allow 0 as a vram limit on APUs
- Handle profiling modes for SMU13.x
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so that we
don't lose the sbios console if FW is missing
- Fix power reporting on certain firmwares for CZN/RN
- Allow S0ix without BIOS support
- Enable freesync over PCon
- Re-enable the AGP aperture on GMC 11.x
amdkfd:
- Error handling fixes
- PASID fixes
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Switch 1 element arrays to flexible arrays
- Fix memory leak on shutdown
- move to new logging
i915:
- Meteorlake display/OA/GSC fw/workarounds enabling
- DP MST DSC support
- Gamma/degamma readout support for the state checker
- Enable SDP split support for DP 2.0
- Add probe blocking support to i915.force_probe parameter
- Enable Xe HP 4tile support
- Avoid display direct calls to uncore
- Fix HuC delayed load memory leaks
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663
- Improve suspend / resume times with VT-d scanout workaround active
- Fix DG2 visual corruption on small BAR systems by not forgetting to
copy CCS aux state
- Fix TLB invalidation for Gen12.50 video and compute engines
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct
drm_edid
- Start using unversioned DMC firmware paths for new platforms
- ELD refactor: Stop using hardware buffer, precompute ELD
- lots of display code refactoring
nouveau:
- drop legacy ioctl support
- replace 0-sized array
msm:
- dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform
- Added bindings for SM8150
- dpu: Partial support for DSC on SM8150 and SM8250
- dpu: Fixed color transformation matrix being lost on suspend/resume
- dp: Support SDM845 and SC8280XP platforms
- dp: Support for limiting DP link rate via DT property
- dsi: Validate display modes according to the DSI OPP table
- dsi: DSI PHY support for the SM6375 platform
- Add MSM_SUBMIT_BO_NO_IMPLICI
- a2xx: Support to load legacy firmware
- a6xx: GPU devcore dump updates for a650/a660
- GPU devfreq tuning and fixes
- Turn 8960 HDMI PHY into clock provider,
- Make 8960 HDMI PHY use PXO clock from DT
etnaviv:
- experimental versilicon NPU support
- report GPU load via fdinfo format
- MMU fault message improvements
tegra:
- rework syncpoint interrupt
mediatek:
- DSI timing fix
- fix config deps
ast:
- various fixes
exynos:
- restore bridge chain order fixes
gud:
- convert to shadow plane buffers
- perform flushing synchronously during atomic update
- Use new debugfs helpers
arm/hdlcd:
- Use new debugfs helper
ili9486:
- Support 16-bit pixel data
imx:
- Split off IPUv3 driver
mipi-dbi:
- convert to DRM shadow-plane helpers
- rsp driver changes
- Support separate I/O-voltage supply
mxsfb:
- Depend on ARCH_MXS or ARCH_MXC
sun4i:
- convert to new TV mode property
vc4:
- convert to new TV mode property
- kunit tests
- Support RGB565 and RGB666 formats
- convert dsi driver to bridge
- Various HVS an CRTC fixes
v3d:
- Do not opencode drm_gem_object_lookup()
virtio:
- improve tracing
vkms:
- support small cursors in IGT tests
- Fix SEGFAULT from incorrect GEM-buffer mapping
rcar-du:
- fixes and improvements"
* tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits)
msm/fbdev: fix unused variable warning with clang.
drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()
dma-buf: make kobj_type structure constant
drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
drm/amd/display: disable SubVP + DRR to prevent underflow
drm/amd/display: Fail atomic_check early on normalize_zpos error
drm/amd/pm: avoid unaligned access warnings
drm/amd/display: avoid unaligned access warnings
drm/amd/display: Remove duplicate/repeating expressions
drm/amd/display: Remove duplicate/repeating expression
drm/amd/display: Make variables declaration inside ifdef guard
drm/amd/display: Fix excess arguments on kernel-doc
drm/amd/display: Add previously missing includes
drm/amd/amdgpu: Add function prototypes to headers
drm/amd/display: Add function prototypes to headers
drm/amd/display: Turn global functions into static
drm/amd/display: remove unused _calculate_degamma_curve function
drm/amd/display: remove unused func declaration from resource headers
drm/amd/display: unset initial value for tf since it's never used
drm/amd/display: camel case cleanup in color_gamma file
...
|
|
Handle the command-line parameter video= in video/cmdline.c. Implement
the fbdev helper fb_get_options() on top. Will allows to handle the
kernel parameter in DRM without fbdev dependencies.
Note that __video_get_options() has the meaning of its return value
inverted compared to fb_get_options(). The new helper returns true if
the adapter has been enabled, and false otherwise.
There is the ofonly parameter, which disables output for non-OF-based
framebuffers. It is only for offb and looks like a workaround. The actual
purpose it not clear to me. Use 'video=off' or 'nomodeset' instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-9-tzimmermann@suse.de
|
|
CONFIG_DRM_USE_DYNAMIC_DEBUG breaks debug prints for (at least modular)
drm drivers. The debug prints can be reinstated by manually frobbing
/sys/module/drm/parameters/debug after the fact, but at that point the
damage is done and all debugs from driver probe are lost. This makes
drivers totally undebuggable.
There's a more complete fix in progress [1], with further details, but
we need this fixed in stable kernels. Mark the feature as broken and
disable it by default, with hopes distros follow suit and disable it as
well.
[1] https://lore.kernel.org/r/20230125203743.564009-1-jim.cromie@gmail.com
Fixes: 84ec67288c10 ("drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro")
Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207143337.2126678-1-jani.nikula@intel.com
|
|
Add comments to avoid removing DRM_LEGACY config menu,
because DRM_LEGACY menu could list other legacy drivers.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-9-cai.huoqing@linux.dev
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked via driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
VIA Unichrome->drivers/gpu/drm/via
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-8-cai.huoqing@linux.dev
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked tdfx driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
3dfx Glide-->driver/gpu/drm/tdfx
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-7-cai.huoqing@linux.dev
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked sis driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
Silicon Integrated Systems->drivers/gpu/drm/sis
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-6-cai.huoqing@linux.dev
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked savage driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
S3 Savage-->drivers/gpu/drm/savage
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-5-cai.huoqing@linux.dev
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked r128 driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
ATI Rage 128->drivers/gpu/drm/r128
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-4-cai.huoqing@linux.dev
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked mga driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
Matrox-->driver/gpu/drm/mga
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-3-cai.huoqing@linux.dev
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked i810 driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
Intel i810-->driver/gpu/drm/i810
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-2-cai.huoqing@linux.dev
|
|
While working on a drm driver that doesn't need the i2c algobit stuff I
noticed that DRM selects this code even though only 8 drivers actually use
it. While also only some drivers use i2c, keep the select for I2C for the
next cleanup patch. Still prepare this already by also selecting I2C for
the individual drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219083627.1401627-1-u.kleine-koenig@pengutronix.de
|
|
Driver-specific tests will need access to the helpers without pulling
every DRM framework test. Let's create an intermediate Kconfig options
for the helpers.
Suggested-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-2-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.2-2022-11-18:
amdgpu:
- SR-IOV fixes
- Clean up DC checks
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- Don't enable degamma on asics which don't support it
- IP discovery fixes
- BACO fixes
- Fix vbios allocation handling when vkms is enabled
- Drop buggy tdr advanced mode GPU reset handling
- Fix the build when DCN is not set in kconfig
- MST DSC fixes
- Userptr fixes
- FRU and RAS EEPROM fixes
- VCN 4.x RAS support
- Aldrebaran CU occupancy reporting fix
- PSP ring cleanup
amdkfd:
- Memory limit fix
- Enable cooperative launch on gfx 10.3
amd-drm-next-6.2-2022-11-11:
amdgpu:
- SMU 13.x updates
- GPUVM TLB race fix
- DCN 3.1.4 updates
- DCN 3.2.x updates
- PSR fixes
- Kerneldoc fix
- Vega10 fan fix
- GPUVM locking fixes in error pathes
- BACO fix for Beige Goby
- EEPROM I2C address cleanup
- GFXOFF fix
- Fix DC memory leak in error pathes
- Flexible array updates
- Mtype fix for GPUVM PTEs
- Move Kconfig into amdgpu directory
- SR-IOV updates
- Fix possible memory leak in CS IOCTL error path
amdkfd:
- Fix possible memory overrun
- CRIU fixes
radeon:
- ACPI ref count fix
- HDA audio notifier support
- Move Kconfig into radeon directory
UAPI:
- Add new GEM_CREATE flags to help to transition more KFD functionality to the DRM UAPI.
These are used internally in the driver to align location based memory coherency
requirements from memory allocated in the KFD with how we manage GPUVM PTEs. They
are currently blocked in the GEM_CREATE IOCTL as we don't have a user right now.
They are just used internally in the kernel driver for now for existing KFD memory
allocations. So a change to the UAPI header, but no functional change in the UAPI.
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118170807.6505-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Move the nomodeset kernel parameter to drivers/video to make it
available to non-DRM drivers. Adapt the interface, but keep the DRM
interface drm_firmware_drivers_only() to avoid churn within DRM. The
function should later be inlined into callers.
The parameter disables any DRM graphics driver that would replace a
driver for firmware-provided scanout buffers. It is an option to easily
fallback to basic graphics output if the hardware's native driver is
broken. Moving it to a more prominent location wil make it available
to fbdev as well.
v2:
* clarify the meaning of the nomodeset parameter (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-2-tzimmermann@suse.de
|
|
Most Kconfig options to enable a driver are in the Kconfig file
inside the relevant directory, move these two to the same.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds the support for the notification of HD-audio hotplug
via the already existing drm_audio_component framework to radeon
driver. This allows us more reliable hotplug notification and ELD
transfer without accessing HD-audio bus; it's more efficient, and more
importantly, it works without waking up the runtime PM.
The implementation is rather simplistic: radeon driver provides the
get_eld ops for HD-audio, and it notifies the audio hotplug via
pin_eld_notify callback upon each radeon_audio_enable() call.
The pin->id is referred as the port number passed to the notifier
callback, and the corresponding connector is looked through the
encoder list in the get_eld callback in turn.
The bind and unbind callbacks handle the device-link so that it
assures the PM call order.
Also, as a gratis bonus, this patch "fixes" the regression by the
recent change in HD-audio to be more strict for the HDMI/DP
connection, too. Since the HD-audio HDMI/DP codec requires both the
connection bit and the valid ELD to be provided, it started failing on
some RADEON gfx boards where the ELD update performed instably. As
this change switches the communication to a direct way between the
audio and the graphics drivers, now the system receives the proper
ELD, and the HDMI/DP hotplug starts working again.
[ v2: fix the logic in radeon_audio_component_get_eld to walk the
connector list since that is where the EDID lives and we can
derive the encoder from the connector because the encoder has
not been assigned at this point (i.e., during monitor probe).
v3: the component binding is moved outside radeon_audio_init() and
_fini(), as those are called from suspend/resume, too.
Drop modeset lock calls that caused Oops.
Moved Kconfig change so that it can be applied on older kernels.
v4: revive drm_modeset_lock*() again, add the missing
device_link_remove() call at unbinding
v5: squash in mutex fix
v6: squash in fix for audio get_eld callback ]
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1569
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core and debug printk changes for
6.1-rc1. Included in here is:
- dynamic debug updates for the core and the drm subsystem. The drm
changes have all been acked by the relevant maintainers
- kernfs fixes for syzbot reported problems
- kernfs refactors and updates for cgroup requirements
- magic number cleanups and removals from the kernel tree (they were
not being used and they really did not actually do anything)
- other tiny cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
docs: filesystems: sysfs: Make text and code for ->show() consistent
Documentation: NBD_REQUEST_MAGIC isn't a magic number
a.out: restore CMAGIC
device property: Add const qualifier to device_get_match_data() parameter
drm_print: add _ddebug descriptor to drm_*dbg prototypes
drm_print: prefer bare printk KERN_DEBUG on generic fn
drm_print: optimize drm_debug_enabled for jump-label
drm-print: add drm_dbg_driver to improve namespace symmetry
drm-print.h: include dyndbg header
drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
drm_print: interpose drm_*dbg with forwarding macros
drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
drm_print: condense enum drm_debug_category
debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
Documentation: ENI155_MAGIC isn't a magic number
Documentation: NBD_REPLY_MAGIC isn't a magic number
nbd: remove define-only NBD_MAGIC, previously magic number
Documentation: FW_HEADER_MAGIC isn't a magic number
Documentation: EEPROM_MAGIC_VALUE isn't a magic number
...
|
|
For CONFIG_DRM_USE_DYNAMIC_DEBUG=y, wrap __drm_dbg() & __drm_dev_dbg()
in one of dyndbg's Factory macros: _dynamic_func_call_no_desc().
This adds the callsite descriptor into the code, and an entry for each
into /proc/dynamic_debug/control.
#> echo class DRM_UT_ATOMIC +p > /proc/dynamic_debug/control
CONFIG_DRM_USE_DYNAMIC_DEBUG=y/n is configurable because of the .data
footprint cost of per-callsite control; 56 bytes/site * ~2k for i915,
~4k callsites for amdgpu. This is large enough that a kernel builder
might not want it.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-5-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into drm-misc-next
Immutable backlight-detect-refactor branch between acpi, drm-* and pdx86
Tag (immutable branch) with v6.0-rc1 + the (acpi/x86) backlight
detect refactor work. For merging into the acpi, drm-* and pdx86
subsystems.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmMVsogUHGhkZWdvZWRl
# QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yy6wgAlig+7hkq940L62lTpj0g2gNQv8zc
# HCsMpnU7dnJcZYaEvIjouZhf33ZbN52c0fQq2JWjt7fFX04LLyIiyrJ26Lc293JR
# ++yXpJcVoewRGqApy/P3Z05TKUCLll5bexvK4t8isnhOtEXD/nDPWKTLIV2Kd1DK
# nLY4KgRznXZ85RhYheUEdidZ7Lwlzt1JVBMq7tpnzu3nVdDExyZmqlqCUITcLynu
# ysuASQGr0D2i+1vb9eifHIA3xsQO0S37Bv62aBMBKxB6B8Fz1DYr8VA2YvoT82Hv
# IFT0hzCCZ/63Ljga05O78TwraxAQX0RvZWqjqGgnZg6fIBh2hxUiqeQY6g==
# =SA1R
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 05 Sep 2022 09:25:44 AM IST
# gpg: using RSA key BAF03B5D2718411A5E9E177E92EC4779440327DC
# gpg: issuer "hdegoede@redhat.com"
# gpg: Can't check signature: No public key
From: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/261afe3d-7790-e945-adf6-a2c96c9b1eff@redhat.com
|
|
drm_mipi_dbi needs lots of DRM_KMS_HELPER support, so select
that Kconfig symbol like it is done is most other uses, and
the way that it was before MIPS_DBI was moved from tinydrm
to its core location.
Fixes these build errors:
ld: drivers/gpu/drm/drm_mipi_dbi.o: in function `mipi_dbi_buf_copy':
drivers/gpu/drm/drm_mipi_dbi.c:205: undefined reference to `drm_gem_fb_get_obj'
ld: drivers/gpu/drm/drm_mipi_dbi.c:211: undefined reference to `drm_gem_fb_begin_cpu_access'
ld: drivers/gpu/drm/drm_mipi_dbi.c:215: undefined reference to `drm_gem_fb_vmap'
ld: drivers/gpu/drm/drm_mipi_dbi.c:222: undefined reference to `drm_fb_swab'
ld: drivers/gpu/drm/drm_mipi_dbi.c:224: undefined reference to `drm_fb_memcpy'
ld: drivers/gpu/drm/drm_mipi_dbi.c:227: undefined reference to `drm_fb_xrgb8888_to_rgb565'
ld: drivers/gpu/drm/drm_mipi_dbi.c:235: undefined reference to `drm_gem_fb_vunmap'
ld: drivers/gpu/drm/drm_mipi_dbi.c:237: undefined reference to `drm_gem_fb_end_cpu_access'
ld: drivers/gpu/drm/drm_mipi_dbi.o: in function `mipi_dbi_dev_init_with_formats':
ld: drivers/gpu/drm/drm_mipi_dbi.o:/X64/../drivers/gpu/drm/drm_mipi_dbi.c:469: undefined reference to `drm_gem_fb_create_with_dirty'
Fixes: 174102f4de23 ("drm/tinydrm: Move mipi-dbi")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Dillon Min <dillon.minfei@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220823004243.11596-1-rdunlap@infradead.org
|
|
Before this commit when we want userspace to use the acpi_video backlight
device we register both the GPU's native backlight device and acpi_video's
firmware acpi_video# backlight device. This relies on userspace preferring
firmware type backlight devices over native ones.
Registering 2 backlight devices for a single display really is
undesirable, don't register the GPU's native backlight device when
another backlight device should be used.
Changes in v2:
- To avoid linker errors when amdgpu is builtin and video_detect.c is in
a module, select ACPI_VIDEO and its deps if ACPI is enabled.
When ACPI is disabled, ACPI_VIDEO is also always disabled, ensuring
the stubs from acpi/video.h will be used.
Changes in v3:
- Use drm_info(drm_dev, "...") to log messages
- ACPI_VIDEO can now be enabled on non X86 too,
adjust the Kconfig changes to match this.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Before this commit when we want userspace to use the acpi_video backlight
device we register both the GPU's native backlight device and acpi_video's
firmware acpi_video# backlight device. This relies on userspace preferring
firmware type backlight devices over native ones.
Registering 2 backlight devices for a single display really is
undesirable, don't register the GPU's native backlight device when
another backlight device should be used.
Changes in v2:
- To avoid linker errors when amdgpu is builtin and video_detect.c is in
a module, select ACPI_VIDEO and its deps if ACPI is enabled.
When ACPI is disabled, ACPI_VIDEO is also always disabled, ensuring
the stubs from acpi/video.h will be used.
Changes in v3:
- Use drm_info(drm_dev, "...") to log messages
- ACPI_VIDEO can now be enabled on non X86 too,
adjust the Kconfig changes to match this.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.
Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".
Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
|
|
Considering the current adoption of the KUnit framework, convert the
DRM mm selftest to the KUnit API.
Signed-off-by: Arthur Grillo <arthur.grillo@usp.br>
Tested-by: David Gow <davidgow@google.com>
Acked-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708203052.236290-10-maira.canal@usp.br
|
|
Considering the current adoption of the KUnit framework, convert the
DRM damage helper selftest to the KUnit API.
Co-developed-by: Arthur Grillo <arthur.grillo@usp.br>
Signed-off-by: Arthur Grillo <arthur.grillo@usp.br>
Tested-by: David Gow <davidgow@google.com>
Acked-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708203052.236290-2-maira.canal@usp.br
|
|
Test the conversion from XRGB8888 to RGB332.
What is tested?
- Different values for the X in XRGB8888 to make sure it is ignored
- Different clip values: Single pixel and full and partial buffer
- Well known colors: White, black, red, green, blue, magenta, yellow
and cyan
- Other colors: Randomly picked
- Destination pitch
How to run the tests?
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/gpu/drm/tests \
--kconfig_add CONFIG_VIRTIO_UML=y \
--kconfig_add CONFIG_UML_PCI_OVER_VIRTIO=y
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620160640.3790-3-jose.exposito89@gmail.com
|