summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
AgeCommit message (Collapse)AuthorFilesLines
2023-05-18drm/amdgpu: skip disabling fence driver src_irqs when device is unpluggedGuchun Chen1-1/+2
When performing device unbind or halt, we have disabled all irqs at the very begining like amdgpu_pci_remove or amdgpu_device_halt. So amdgpu_irq_put for irqs stored in fence driver should not be called any more, otherwise, below calltrace will arrive. [ 139.114088] WARNING: CPU: 2 PID: 1550 at drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:616 amdgpu_irq_put+0xf6/0x110 [amdgpu] [ 139.114655] Call Trace: [ 139.114655] <TASK> [ 139.114657] amdgpu_fence_driver_hw_fini+0x93/0x130 [amdgpu] [ 139.114836] amdgpu_device_fini_hw+0xb6/0x350 [amdgpu] [ 139.114955] amdgpu_driver_unload_kms+0x51/0x70 [amdgpu] [ 139.115075] amdgpu_pci_remove+0x63/0x160 [amdgpu] [ 139.115193] ? __pm_runtime_resume+0x64/0x90 [ 139.115195] pci_device_remove+0x3a/0xb0 [ 139.115197] device_remove+0x43/0x70 [ 139.115198] device_release_driver_internal+0xbd/0x140 Signed-off-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-23drm/amdgpu: Force signal hw_fences that are embedded in non-sched jobsYuBiao Wang1-0/+9
[Why] For engines not supporting soft reset, i.e. VCN, there will be a failed ib test before mode 1 reset during asic reset. The fences in this case are never signaled and next time when we try to free the sa_bo, kernel will hang. [How] During pre_asic_reset, driver will clear job fences and afterwards the fences' refcount will be reduced to 1. For drm_sched_jobs it will be released in job_free_cb, and for non-sched jobs like ib_test, it's meant to be released in sa_bo_free but only when the fences are signaled. So we have to force signal the non_sched bad job's fence during pre_asic_reset or the clear is not complete. Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-09drm/amdgpu/fence: Fix oops due to non-matching drm_sched init/finiGuilherme G. Piccoli1-1/+7
Currently amdgpu calls drm_sched_fini() from the fence driver sw fini routine - such function is expected to be called only after the respective init function - drm_sched_init() - was executed successfully. Happens that we faced a driver probe failure in the Steam Deck recently, and the function drm_sched_fini() was called even without its counter-part had been previously called, causing the following oops: amdgpu: probe of 0000:04:00.0 failed with error -110 BUG: kernel NULL pointer dereference, address: 0000000000000090 PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 609 Comm: systemd-udevd Not tainted 6.2.0-rc3-gpiccoli #338 Hardware name: Valve Jupiter/Jupiter, BIOS F7A0113 11/04/2022 RIP: 0010:drm_sched_fini+0x84/0xa0 [gpu_sched] [...] Call Trace: <TASK> amdgpu_fence_driver_sw_fini+0xc8/0xd0 [amdgpu] amdgpu_device_fini_sw+0x2b/0x3b0 [amdgpu] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] devm_drm_dev_init_release+0x49/0x70 [...] To prevent that, check if the drm_sched was properly initialized for a given ring before calling its fini counter-part. Notice ideally we'd use sched.ready for that; such field is set as the latest thing on drm_sched_init(). But amdgpu seems to "override" the meaning of such field - in the above oops for example, it was a GFX ring causing the crash, and the sched.ready field was set to true in the ring init routine, regardless of the state of the DRM scheduler. Hence, we ended-up using sched.ops as per Christian's suggestion [0], and also removed the no_scheduler check [1]. [0] https://lore.kernel.org/amd-gfx/984ee981-2906-0eaf-ccec-9f80975cb136@amd.com/ [1] https://lore.kernel.org/amd-gfx/cd0e2994-f85f-d837-609f-7056d5fb7231@amd.com/ Fixes: 067f44c8b459 ("drm/amdgpu: avoid over-handle of fence driver fini in s3 test (v2)") Suggested-by: Christian König <christian.koenig@amd.com> Cc: Guchun Chen <guchun.chen@amd.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-12-02drm/amdgpu: MCBP based on DRM scheduler (v9)Jiadong.Zhu1-0/+54
Trigger Mid-Command Buffer Preemption according to the priority of the software rings and the hw fence signalling condition. The muxer saves the locations of the indirect buffer frames from the software ring together with the fence sequence number in its fifo queue, and pops out those records when the fences are signalled. The locations are used to resubmit packages in preemption scenarios by coping the chunks from the software ring. v2: Update comment style. v3: Fix conflict caused by previous modifications. v4: Remove unnecessary prints. v5: Fix corner cases for resubmission cases. v6: Refactor functions for resubmission, calling fence_process in irq handler. v7: Solve conflict for removing amdgpu_sw_ring.c. v8: Add time threshold to judge if preemption request is needed. v9: Correct comment spelling. Set fence emit timestamp before rsu assignment. Cc: Christian Koenig <Christian.Koenig@amd.com> Cc: Luben Tuikov <Luben.Tuikov@amd.com> Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-28drm/amdgpu: Remove fence_process in count_emittedJiadong.Zhu1-1/+0
The function amdgpu_fence_count_emitted used in work_hander should not call amdgpu_fence_process which must be used in irq handler. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-13drm/amdgpu: support reset flag set for gpu resetLikun Gao1-1/+8
Move reset_context out of gpu recover function to make it configurable for different reset purpose. For the reset way of call gpu_recovery sysfs, force to use full reset method. Otherwise, try soft reset by default if the related ASIC supportted, if soft reset failed, will use full reset. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-28drm/amdgpu: Follow up change to previous drm scheduler change.Andrey Grodzovsky1-1/+6
Align refcount behaviour for amdgpu_job embedded HW fence with classic pointer style HW fences by increasing refcount each time emit is called so amdgpu code doesn't need to make workarounds using amdgpu_job.job_run_counter to keep the HW fence refcount balanced. Also since in the previous patch we resumed setting s_fence->parent to NULL in drm_sched_stop switch to directly checking if job->hw_fence is signaled to short circuit reset if already signed. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Tested-by: Yiqing Yao <yiqing.yao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-28drm/amdgpu: Prevent race between late signaled fences and GPU reset.Andrey Grodzovsky1-0/+18
Problem: After we start handling timed out jobs we assume there fences won't be signaled but we cannot be sure and sometimes they fire late. We need to prevent concurrent accesses to fence array from amdgpu_fence_driver_clear_job_fences during GPU reset and amdgpu_fence_process from a late EOP interrupt. Fix: Before accessing fence array in GPU disable EOP interrupt and flush all pending interrupt handlers for amdgpu device's interrupt line. v2: Switch from irq_get/put to full enable/disable_irq for amdgpu Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-28drm/amdgpu: Add put fence in amdgpu_fence_driver_clear_job_fencesAndrey Grodzovsky1-1/+3
This function should drop the fence refcount when it extracts the fence from the fence array, just as it's done in amdgpu_fence_process. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-10drm/amdgpu: Rename amdgpu_device_gpu_recover_imp back to ↵Andrey Grodzovsky1-1/+1
amdgpu_device_gpu_recover We removed the wrapper that was queueing the recover function into reset domain queue who was using this name. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-10drm/amdgpu: Add work_struct for GPU reset from debugfsAndrey Grodzovsky1-2/+17
We need to have a work_struct to cancel this reset if another already in progress. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amdgpu: assign the cpu/gpu address of fence from ringJack Xiao1-2/+2
assign the cpu/gpu address of fence for the normal or mes ring from ring structure. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-09drm/amdgpu: Move scheduler init to after XGMI is readyAndrey Grodzovsky1-38/+5
Before we initialize schedulers we must know which reset domain are we in - for single device there iis a single domain per device and so single wq per device. For XGMI the reset domain spans the entire XGMI hive and so the reset wq is per hive. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74112.html
2022-01-09Revert "drm/amdgpu: stop scheduler when calling hw_fini (v2)"Len Brown1-8/+0
This reverts commit f7d6779df642720e22bffd449e683bb8690bd3bf. This bisected regression has impacted suspend-resume stability since 5.15-rc1. It regressed -stable via 5.14.10. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215315 Fixes: f7d6779df64 ("drm/amdgpu: stop scheduler when calling hw_fini (v2)") Cc: Guchun Chen <guchun.chen@amd.com> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org> # 5.14+ Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-17drm/amdgpu: introduce new amdgpu_fence object to indicate the job embedded fenceHuang Rui1-39/+87
The job embedded fence donesn't initialize the flags at dma_fence_init(). Then we will go a wrong way in amdgpu_fence_get_timeline_name callback and trigger a null pointer panic once we enabled the trace event here. So introduce new amdgpu_fence object to indicate the job embedded fence. [ 156.131790] BUG: kernel NULL pointer dereference, address: 00000000000002a0 [ 156.131804] #PF: supervisor read access in kernel mode [ 156.131811] #PF: error_code(0x0000) - not-present page [ 156.131817] PGD 0 P4D 0 [ 156.131824] Oops: 0000 [#1] PREEMPT SMP PTI [ 156.131832] CPU: 6 PID: 1404 Comm: sdma0 Tainted: G OE 5.16.0-rc1-custom #1 [ 156.131842] Hardware name: Gigabyte Technology Co., Ltd. Z170XP-SLI/Z170XP-SLI-CF, BIOS F20 11/04/2016 [ 156.131848] RIP: 0010:strlen+0x0/0x20 [ 156.131859] Code: 89 c0 c3 0f 1f 80 00 00 00 00 48 01 fe eb 0f 0f b6 07 38 d0 74 10 48 83 c7 01 84 c0 74 05 48 39 f7 75 ec 31 c0 c3 48 89 f8 c3 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 31 [ 156.131872] RSP: 0018:ffff9bd0018dbcf8 EFLAGS: 00010206 [ 156.131880] RAX: 00000000000002a0 RBX: ffff8d0305ef01b0 RCX: 000000000000000b [ 156.131888] RDX: ffff8d03772ab924 RSI: ffff8d0305ef01b0 RDI: 00000000000002a0 [ 156.131895] RBP: ffff9bd0018dbd60 R08: ffff8d03002094d0 R09: 0000000000000000 [ 156.131901] R10: 000000000000005e R11: 0000000000000065 R12: ffff8d03002094d0 [ 156.131907] R13: 000000000000001f R14: 0000000000070018 R15: 0000000000000007 [ 156.131914] FS: 0000000000000000(0000) GS:ffff8d062ed80000(0000) knlGS:0000000000000000 [ 156.131923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 156.131929] CR2: 00000000000002a0 CR3: 000000001120a005 CR4: 00000000003706e0 [ 156.131937] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 156.131942] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 156.131949] Call Trace: [ 156.131953] <TASK> [ 156.131957] ? trace_event_raw_event_dma_fence+0xcc/0x200 [ 156.131973] ? ring_buffer_unlock_commit+0x23/0x130 [ 156.131982] dma_fence_init+0x92/0xb0 [ 156.131993] amdgpu_fence_emit+0x10d/0x2b0 [amdgpu] [ 156.132302] amdgpu_ib_schedule+0x2f9/0x580 [amdgpu] [ 156.132586] amdgpu_job_run+0xed/0x220 [amdgpu] v2: fix mismatch warning between the prototype and function name (Ray, kernel test robot) Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-08drm/amdgpu: use adev_to_drm for consistency when accessing drm_deviceGuchun Chen1-1/+1
adev_to_drm is used everywhere, so improve recent changes when accessing drm_device pointer from amdgpu_device. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14Merge drm/drm-next into drm-misc-nextMaxime Ripard1-22/+80
Kickstart new drm-misc-next cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-09-02dma-buf: nuke DMA_FENCE_TRACE macros v2Christian König1-9/+1
Only the DRM GPU scheduler, radeon and amdgpu where using them and they depend on a non existing config option to actually emit some code. v2: keep the signal path as is for now Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210818105443.1578-1-christian.koenig@amd.com
2021-08-31drm/amdgpu: stop scheduler when calling hw_fini (v2)Guchun Chen1-0/+8
This gurantees no more work on the ring can be submitted to hardware in suspend/resume case, otherwise a potential race will occur and the ring will get no chance to stay empty before suspend. v2: Call drm_sched_resubmit_job before drm_sched_start to restart jobs from the pending list. Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-16drm/amd/amdgpu embed hw_fence into amdgpu_jobJack Zhang1-19/+67
Why: Previously hw fence is alloced separately with job. It caused historical lifetime issues and corner cases. The ideal situation is to take fence to manage both job and fence's lifetime, and simplify the design of gpu-scheduler. How: We propose to embed hw_fence into amdgpu_job. 1. We cover the normal job submission by this method. 2. For ib_test, and submit without a parent job keep the legacy way to create a hw fence separately. v2: use AMDGPU_FENCE_FLAG_EMBED_IN_JOB_BIT to show that the fence is embedded in a job. v3: remove redundant variable ring in amdgpu_job v4: add tdr sequence support for this feature. Add a job_run_counter to indicate whether this job is a resubmit job. v5 add missing handling in amdgpu_fence_enable_signaling Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com> Signed-off-by: Jack Zhang <Jack.Zhang7@hotmail.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed by: Monk Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amdgpu: avoid over-handle of fence driver fini in s3 test (v2)Guchun Chen1-5/+7
In amdgpu_fence_driver_hw_fini, no need to call drm_sched_fini to stop scheduler in s3 test, otherwise, fence related failure will arrive after resume. To fix this and for a better clean up, move drm_sched_fini from fence_hw_fini to fence_sw_fini, as it's part of driver shutdown, and should never be called in hw_fini. v2: rename amdgpu_fence_driver_init to amdgpu_fence_driver_sw_init, to keep sw_init and sw_fini paired. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1668 Fixes: 8d35a2596164c1 ("drm/amdgpu: adjust fence driver enable sequence") Suggested-by: Christian König <christian.koenig@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-30Merge tag 'amd-drm-next-5.15-2021-07-29' of ↵Dave Airlie1-39/+5
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.15-2021-07-29: amdgpu: - VCN/JPEG power down sequencing fixes - Various navi pcie link handling fixes - Clockgating fixes - Yellow Carp fixes - Beige Goby fixes - Misc code cleanups - S0ix fixes - SMU i2c bus rework - EEPROM handling rework - PSP ucode handling cleanup - SMU error handling rework - AMD HDMI freesync fixes - USB PD firmware update rework - MMIO based vram access rework - Misc display fixes - Backlight fixes - Add initial Cyan Skillfish support - Overclocking fixes suspend/resume amdkfd: - Sysfs leak fix - Add counters for vm faults and migration - GPUVM TLB optimizations radeon: - Misc fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730033455.3852-1-alexander.deucher@amd.com
2021-07-29drm/amdgpu: adjust fence driver enable sequenceLikun Gao1-39/+5
Fence driver was enabled per ring when sw init on per IP block before. Change to enable all the fence driver at the same time after amdgpu_device_ip_init finished. Rename some function related to fence to make it reasonable for read. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-01drm/sched: Allow using a dedicated workqueue for the timeout/fault tdrBoris Brezillon1-1/+1
Mali Midgard/Bifrost GPUs have 3 hardware queues but only a global GPU reset. This leads to extra complexity when we need to synchronize timeout works with the reset work. One solution to address that is to have an ordered workqueue at the driver level that will be used by the different schedulers to queue their timeout work. Thanks to the serialization provided by the ordered workqueue we are guaranteed that timeout handlers are executed sequentially, and can thus easily reset the GPU from the timeout handler without extra synchronization. v5: * Add a new paragraph to the timedout_job() method v3: * New patch v4: * Actually use the timeout_wq to queue the timeout work Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Cc: Qiang Yu <yuq825@gmail.com> Cc: Emma Anholt <emma@anholt.net> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-3-boris.brezillon@collabora.com
2021-05-22Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-0/+1
Backmerging from drm/drm-next to the patches for AMD devices for v5.14. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-05-20drm/amdgpu: Fix hang on device removal.Andrey Grodzovsky1-6/+10
If removing while commands in flight you cannot wait to flush the HW fences on a ring since the device is gone. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-13-andrey.grodzovsky@amd.com
2021-05-20drm/amdgpu: Split amdgpu_device_fini into early and lateAndrey Grodzovsky1-1/+14
Some of the stuff in amdgpu_device_fini such as HW interrupts disable and pending fences finilization must be done right away on pci_remove while most of the stuff which relates to finilizing and releasing driver data structures can be kept until drm_driver.release hook is called, i.e. when the last device reference is dropped. v4: Change functions prefix early->hw and late->sw Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-3-andrey.grodzovsky@amd.com
2021-04-21drm/amd/amdgpu/amdgpu_fence: Provide description for 'sched_score'Lee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:444: warning: Function parameter or member 'sched_score' not described in 'amdgpu_fence_driver_init_ring' Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Jerome Glisse <glisse@freedesktop.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amdgpu: add the sched_score to amdgpu_ring_initChristian König1-24/+26
Allow separate ring to share the same scheduler score. No functional change. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-and-Tested-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-26Merge tag 'amd-drm-next-5.13-2021-03-23' of ↵Daniel Vetter1-29/+22
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.13-2021-03-23: amdgpu: - Debugfs cleanup - Various cleanups and spelling fixes - Flexible array cleanups - Initial AMD Freesync HDMI - Display fixes - 10bpc dithering improvements - Display ASSR support - Clean up and unify powerplay and swsmu interfaces - Vangogh fixes - Add SMU gfx busy queues for RV/PCO - PCIE DPM fixes - S0ix fixes - GPU metrics data fixes - DCN secure display support - Backlight type override - Add initial support for Aldebaran - RAS fixes - Prime fixes for A+A systems - Reset fixes - Initial resource cursor support - Drop legacy IO BAR requirements - Various power fixes amdkfd: - MMU notifier fixes - APU fixes radeon: - Debugfs cleanups - Flexible array cleanups UAPI: - amdgpu: Add a new INFO ioctl interface to query video capabilities rather than hardcoding them in userspace. This allows us to provide fine grained asic capabilities (e.g., if a particular part is bandwidth limited, we can limit the capabilities). Proposed userspace: https://gitlab.freedesktop.org/leoliu/drm/-/commits/info_video_caps https://gitlab.freedesktop.org/leoliu/mesa/-/commits/info_video_caps - amdkfd: bump the driver version. There was a problem with reporting some RAS features on older versions of the driver. Proposed userspace: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/commit/7cdd63475c36bb9f49bb960f90f9a8cdb7e80a21 Danvet: A bunch of conflicts all over, but it seems to compile ... I did put the call to dc_allow_idle_optimizations() on a single line since it looked a bit too jarring to be left alone. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324040147.1990338-1-alexander.deucher@amd.com
2021-03-05drm/amdgpu: Fix some unload driver issuesEmily Deng1-2/+3
When unloading driver after killing some applications, it will hit sdma flush tlb job timeout which is called by ttm_bo_delay_delete. So to avoid the job submit after fence driver fini, call ttm_bo_lock_delayed_workqueue before fence driver fini. And also put drm_sched_fini before waiting fence. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amdgpu: do not use drm middle layer for debugfsNirmoy Das1-27/+19
Use debugfs API directly instead of drm middle layer. This also includes following debugfs file output changes: 1 amdgpu_evict_vram/amdgpu_evict_gtt output will not contain any braces. e.g. (0) --> 0 2 amdgpu_gpu_recover output will print return value of amdgpu_device_gpu_recover() instead of not so important "gpu recover" message. v2: * checkpatch.pl: use '0444' instead of S_IRUGO. * remove S_IFREG from mode. * remove mode variable. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-05drm/scheduler: provide scheduler score externallyChristian König1-1/+1
Allow multiple schedulers to share the load balancing score. This is useful when one engine has different hw rings. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-and-Tested-by: Leo Liu <leo.liu@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204144405.2737-1-christian.koenig@amd.com
2020-11-13drm/amd/amdgpu/amdgpu_fence: Fix some issues pertaining to function ↵Lee Jones1-5/+6
documentation Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:139: warning: Function parameter or member 'flags' not described in 'amdgpu_fence_emit' drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:197: warning: Function parameter or member 'timeout' not described in 'amdgpu_fence_emit_polling' drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:302: warning: Function parameter or member 't' not described in 'amdgpu_fence_fallback' drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:302: warning: Excess function parameter 'work' description in 'amdgpu_fence_fallback' drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:320: warning: Excess function parameter 'adev' description in 'amdgpu_fence_wait_empty' drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:649: warning: Function parameter or member 'f' not described in 'amdgpu_fence_enable_signaling' drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:649: warning: Excess function parameter 'fence' description in 'amdgpu_fence_enable_signaling' drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:684: warning: Function parameter or member 'f' not described in 'amdgpu_fence_release' drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:684: warning: Excess function parameter 'fence' description in 'amdgpu_fence_release' drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:749: warning: Function parameter or member 'm' not described in 'amdgpu_debugfs_gpu_recover' drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:749: warning: Function parameter or member 'data' not described in 'amdgpu_debugfs_gpu_recover' Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Jerome Glisse <glisse@freedesktop.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amdgpu: Get DRM dev from adev by inline-fLuben Tuikov1-3/+3
Add a static inline adev_to_drm() to obtain the DRM device pointer from an amdgpu_device pointer. Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amdgpu: drm_device to amdgpu_device by inline-f (v2)Luben Tuikov1-2/+2
Get the amdgpu_device from the DRM device by use of an inline function, drm_to_adev(). The inline function resolves a pointer to struct drm_device to a pointer to struct amdgpu_device. v2: Use a typed visible static inline function instead of an invisible macro. Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amdgpu: use ARRAY_SIZE() to add amdgpu debugfs filesXiaojie Yuan1-2/+4
to easily add new debugfs file w/o changing the hardcoded list count. Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08gpu/drm: Remove debug info about CPU addressTiezhu Yang1-3/+2
When I update the latest kernel, I see the following "____ptrval____" boot messages. [ 1.872600] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000048000c00 and cpu addr 0x(____ptrval____) [ 1.879095] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x0000000040056038 and cpu addr 0x(____ptrval____) Both radeon_fence_driver_start_ring() and amdgpu_fence_driver_start_ring() have the similar issue, there exists the following two methods to solve it: (1) Use "%pK" instead of "%p" so that the CPU address can be printed when the kptr_restrict sysctl is set to 1. (2) Just completely drop the CPU address suggested by Christian, because the CPU address was useful in the past, but isn't any more. We now have a debugfs file to read the current fence values. Since the CPU address is not much useful, just remove the debug info about CPU address. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu: restrict the hw sched jobs number to power of twoKevin Wang1-2/+1
the module parameter sched_hw_submission is probably from user mode, and the kernel need to check whether it is legal. 1. align hw sched jobs to power of 2 and set minimum number is 2. 2. use kernel api is_power_of_2() to simplify driver code. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu/fence: fix ref count leak when pm_runtime_get_sync failsAlex Deucher1-1/+3
The call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu/fence: use the no_scheduler flagAlex Deucher1-4/+4
Rather than checking the ring type manually. We already set this for MES and KIQ (and a few other special cases). Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu: skip GPU scheduler setup for KIQ and MES ringLikun Gao1-1/+1
Fix the coding error to skip GPU scheduler setup for KIQ and MES ring. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu: no need to set up GPU scheduler for mes ringJack Xiao1-2/+3
As mes ring directly submits to hardwared, it's no need to set up GPU scheduler for mes ring. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu: avoid dereferencing a NULL pointerJack Xiao1-7/+12
Check if irq_src is NULL to avoid dereferencing a NULL pointer, for MES ring is uneccessary to recieve an interrupt notification. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-24drm/amdgpu: protect ring overrunYintian Tao1-1/+9
Wait for the oldest sequence on the ring to be signaled in order to make sure there will be no command overrun. v2: fix coding stype and remove abs operation v3: remove the initialization of variable r Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-26drm/amdgpu/fence: move debugfs init into core amdgpu debugfsAlex Deucher1-3/+0
In order to remove the load and unload drm callbacks, we need to reorder the init sequence to move all the drm debugfs file handling. Do this for fence handling. Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-14drm/amdgpu/debugfs: properly handle runtime pmAlex Deucher1-0/+8
If driver debugfs files are accessed, power up the GPU when necessary. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amdgpu/pm_runtime: update usage count in fence handlingAlex Deucher1-1/+5
Increment the usage count in emit fence, and decrement in process fence to make sure the GPU is always considered in use while there are fences outstanding. We always wait for the engines to drain in runtime suspend, but in practice that only covers short lived jobs for gfx. This should cover us for longer lived fences. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/amdgpu:Fix compute ring unable to detect hang.Jesse Zhang1-12/+1
When compute fence did not signal, compute ring cannot detect hardware hang because its timeout value is set to be infinite by default. In SR-IOV and passthrough mode, if user does not declare custome timeout value for compute ring, then use gfx ring timeout value as default. So that when there is a ture hardware hang, compute ring can detect it. Signed-off-by: Jesse Zhang <zhexi.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-01 09:59:31 +0300