summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/drm_syncobj.c
AgeCommit message (Collapse)AuthorFilesLines
2024-02-26Merge v6.8-rc6 into drm-nextDaniel Vetter1-1/+12
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches, there's a few same-area-changed conflicts (xe and amdgpu mostly) that are getting a bit too annoying. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-02-22drm/syncobj: handle NULL fence in syncobj_eventfd_entry_funcErik Kurzinger1-1/+12
During syncobj_eventfd_entry_func, dma_fence_chain_find_seqno may set the fence to NULL if the given seqno is signaled and a later seqno has already been submitted. In that case, the eventfd should be signaled immediately which currently does not happen. This is a similar issue to the one addressed by commit b19926d4f3a6 ("drm/syncobj: Deal with signalled fences in drm_syncobj_find_fence."). As a fix, if the return value of dma_fence_chain_find_seqno indicates success but it sets the fence to NULL, we will assign a stub fence to ensure the following code still signals the eventfd. v1 -> v2: assign a stub fence instead of signaling the eventfd Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com> Fixes: c7a472297169 ("drm/syncobj: add IOCTL to register an eventfd") Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20240221184527.37667-1-ekurzinger@nvidia.com
2024-02-22drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is setErik Kurzinger1-2/+4
When waiting for a syncobj timeline point whose fence has not yet been submitted with the WAIT_FOR_SUBMIT flag, a callback is registered using drm_syncobj_fence_add_wait and the thread is put to sleep until the timeout expires. If the fence is submitted before then, drm_syncobj_add_point will wake up the sleeping thread immediately which will proceed to wait for the fence to be signaled. However, if the WAIT_AVAILABLE flag is used instead, drm_syncobj_fence_add_wait won't get called, meaning the waiting thread will always sleep for the full timeout duration, even if the fence gets submitted earlier. If it turns out that the fence *has* been submitted by the time it eventually wakes up, it will still indicate to userspace that the wait completed successfully (it won't return -ETIME), but it will have taken much longer than it should have. To fix this, we must call drm_syncobj_fence_add_wait if *either* the WAIT_FOR_SUBMIT flag or the WAIT_AVAILABLE flag is set. The only difference being that with WAIT_FOR_SUBMIT we will also wait for the fence to be signaled after it has been submitted while with WAIT_AVAILABLE we will return immediately. IGT test patch: https://lists.freedesktop.org/archives/igt-dev/2024-January/067537.html v1 -> v2: adjust lockdep_assert_none_held_once condition (cherry picked from commit 8c44ea81634a4a337df70a32621a5f3791be23df) Fixes: 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8") Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-1-ekurzinger@nvidia.com
2024-02-22drm/syncobj: call might_sleep before waiting for fence submissionErik Kurzinger1-1/+3
If either the DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT or DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE flags are passed to drm_syncobj_array_wait_timeout, the function might sleep if the fence at one of the given timeline points has not yet been submitted. Therefore, we should call might_sleep in that case to catch potential bugs. Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-3-ekurzinger@nvidia.com
2024-02-22drm/syncobj: reject invalid flags in drm_syncobj_find_fenceErik Kurzinger1-0/+3
The only flag that is meaningful to drm_syncobj_find_fence is DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT. It should return -EINVAL for any other flag bits. Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-2-ekurzinger@nvidia.com
2024-02-22drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is setErik Kurzinger1-2/+4
When waiting for a syncobj timeline point whose fence has not yet been submitted with the WAIT_FOR_SUBMIT flag, a callback is registered using drm_syncobj_fence_add_wait and the thread is put to sleep until the timeout expires. If the fence is submitted before then, drm_syncobj_add_point will wake up the sleeping thread immediately which will proceed to wait for the fence to be signaled. However, if the WAIT_AVAILABLE flag is used instead, drm_syncobj_fence_add_wait won't get called, meaning the waiting thread will always sleep for the full timeout duration, even if the fence gets submitted earlier. If it turns out that the fence *has* been submitted by the time it eventually wakes up, it will still indicate to userspace that the wait completed successfully (it won't return -ETIME), but it will have taken much longer than it should have. To fix this, we must call drm_syncobj_fence_add_wait if *either* the WAIT_FOR_SUBMIT flag or the WAIT_AVAILABLE flag is set. The only difference being that with WAIT_FOR_SUBMIT we will also wait for the fence to be signaled after it has been submitted while with WAIT_AVAILABLE we will return immediately. IGT test patch: https://lists.freedesktop.org/archives/igt-dev/2024-January/067537.html v1 -> v2: adjust lockdep_assert_none_held_once condition Fixes: 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8") Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-1-ekurzinger@nvidia.com
2024-01-12Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-13/+51
Pull drm updates from Dave Airlie: "This contains two major new drivers: - imagination is a first driver for Imagination Technologies devices, it only covers very specific devices, but there is hope to grow it - xe is a reboot of the i915 GPU (shares display) side using a more upstream focused development model, and trying to maximise code sharing. It's not enabled for any hw by default, and will hopefully get switched on for Intel's Lunarlake. This also drops a bunch of the old UMS ioctls. It's been dead long enough. amdgpu has a bunch of new color management code that is being used in the Steam Deck. amdgpu also has a new ACPI WBRF interaction to help avoid radio interference. Otherwise it's the usual lots of changes in lots of places. Detailed summary: new drivers: - imagination - new driver for Imagination Technologies GPU - xe - new driver for Intel GPUs using core drm concepts core: - add CLOSE_FB ioctl - remove old UMS ioctls - increase max objects to accomodate AMD color mgmt encoder: - create per-encoder debugfs directory edid: - split out drm_eld - SAD helpers - drop edid_firmware module parameter format-helper: - cache format conversion buffers sched: - move from kthread to workqueue - rename some internals - implement dynamic job-flow control gpuvm: - provide more features to handle GEM objects client: - don't acquire module reference displayport: - add mst path property documentation fdinfo: - alignment fix dma-buf: - add fence timestamp helper - add fence deadline support bridge: - transparent aux-bridge for DP/USB-C - lt8912b: add suspend/resume support and power regulator support panel: - edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 - chromebook panel support - elida-kd35t133: rework pm - powkiddy RK2023 panel - himax-hx8394: drop prepare/unprepare and shutdown logic - BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G - Evervision VGG644804, SDC ATNA45AF01 - nv3052c: register docs, init sequence fixes, fascontek FS035VG158 - st7701: Anbernic RG-ARC support - r63353 panel controller - Ilitek ILI9805 panel controller - AUO G156HAN04.0 simplefb: - support memory regions - support power domains amdgpu: - add new 64-bit sequence number infrastructure - add AMD specific color management - ACPI WBRF support for RF interference handling - GPUVM updates - RAS updates - DCN 3.5 updates - Rework PCIe link speed handling - Document GPU reset types - DMUB fixes - eDP fixes - NBIO 7.9/7.11 updates - SubVP updates - XGMI PCIe state dumping for aqua vanjaram - GFX11 golden register updates - enable tunnelling on high pri compute amdkfd: - Migrate TLB flushing logic to amdgpu - Trap handler fixes - Fix restore workers handling on suspend/resume - Fix possible memory leak in pqm_uninit() - support import/export of dma-bufs using GEM handles radeon: - fix possible overflows in command buffer checking - check for errors in ring_lock i915: - reorg display code for reuse in xe driver - fdinfo memory stats printing - DP MST bandwidth mgmt improvements - DP panel replay enabling - MTL C20 phy state verification - MTL DP DSC fractional bpp support - Audio fastset support - use dma_fence interfaces instead of i915_sw_fence - Separate gem and display code - AUX register macro refactoring - Separate display module/device parameters - Move display capabilities debugfs under display - Makefile cleanups - Register cleanups - Move display lock inits under display/ - VLV/CHV DPIO PHY register and interface refactoring - DSI VBT sequence refactoring - C10/C20 PHY PLL hardware readout - DPLL code cleanups - Cleanup PXP plane protection checks - Improve display debug msgs - PSR selective fetch fixes/improvements - DP MST fixes - Xe2LPD FBC restrictions removed - DGFX uses direct VBT pin mapping - more MTL WAs - fix MTL eDP bug - eliminate use of kmap_atomic habanalabs: - sysfs entry to identify a device minor id with debugfs path - sysfs entry to expose device module id - add signed device info retrieval through INFO ioctl - add Gaudi2C device support - pcie reset prepare/done hooks msm: - Add support for SDM670, SM8650 - Handle the CFG interconnect to fix the obscure hangs / timeouts - Kconfig fix for QMP dependency - use managed allocators - DPU: SDM670, SM8650 support - DPU: Enable SmartDMA on SM8350 and SM8450 - DP: enable runtime PM support - GPU: add metadata UAPI - GPU: move devcoredumps to GPU device - GPU: convert to drm_exec ivpu: - update FW API - new debugfs file - a new NOP job submission test mode - improve suspend/resume - PM improvements - MMU PT optimizations - firmware profile frequency support - support for uncached buffers - switch to gem shmem helpers - replace kthread with threaded irqs rockchip: - rk3066_hdmi: convert to atomic - vop2: support nv20 and nv30 - rk3588 support mediatek: - use devm_platform_ioremap_resource - stop using iommu_present - MT8188 VDOSYS1 display support panfrost: - PM improvements - improve interrupt handling as poweroff qaic: - allow to run with single MSI - support host/device time sync - switch to persistent DRM devices exynos: - fix potential error pointer dereference - fix wrong error checking - add missing call to drm_atomic_helper_shutdown omapdrm: - dma-fence lockdep annotation fix tidss: - dma-fence lockdep annotation fix - support for AM62A7 v3d: - BCM2712 - rpi5 support - fdinfo + gputop support - uapi for CPU job handling virtio-gpu: - add context debug name" * tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits) drm/amd/display: Allow z8/z10 from driver drm/amd/display: fix bandwidth validation failure on DCN 2.1 drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm drm/amd/display: Fix recent checkpatch errors in amdgpu_dm Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole" drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings() drm/amd/display: Fix power_helpers.c codestyle drm/amd/display: Fix hdcp_log.h codestyle drm/amd/display: Fix hdcp2_execution.c codestyle drm/amd/display: Fix hdcp_psp.h codestyle drm/amd/display: Fix freesync.c codestyle drm/amd/display: Fix hdcp_psp.c codestyle drm/amd/display: Fix hdcp1_execution.c codestyle drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()' drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()' drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()' drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()' ...
2023-12-02drm/syncobj: Add deadline support for syncobj waitsRob Clark1-13/+51
Add a new flag to let userspace provide a deadline as a hint for syncobj and timeline waits. This gives a hint to the driver signaling the backing fences about how soon userspace needs it to compete work, so it can adjust GPU frequency accordingly. An immediate deadline can be given to provide something equivalent to i915 "wait boost". v2: Use absolute u64 ns value for deadline hint, drop cap and driver feature flag in favor of allowing count_handles==0 as a way for userspace to probe kernel for support of new flag v3: More verbose comments about UAPI v4: Fix negative zero, s/deadline_ns/deadline_nsec/ for consistency with existing ioctl struct fields v5: Comment/description typo fixes Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [DB: fixed checkpatch warnings] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230823215458.203366-2-robdclark@gmail.com
2023-11-28eventfd: simplify eventfd_signal()Christian Brauner1-3/+3
Ever since the eventfd type was introduced back in 2007 in commit e1ad7468c77d ("signal/timer/event: eventfd core") the eventfd_signal() function only ever passed 1 as a value for @n. There's no point in keeping that additional argument. Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-2-bd549b14ce0c@kernel.org Acked-by: Xu Yilun <yilun.xu@intel.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl Acked-by: Eric Farman <farman@linux.ibm.com> # s390 Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-26drm/syncobj: fix DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLEErik Kurzinger1-1/+2
If DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT is invoked with the DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE flag set but no fence has yet been submitted for the given timeline point the call will fail immediately with EINVAL. This does not match the intended behavior where the call should wait until the fence has been submitted (or the timeout expires). The following small example program illustrates the issue. It should wait for 5 seconds and then print ETIME, but instead it terminates right away after printing EINVAL. #include <stdio.h> #include <fcntl.h> #include <time.h> #include <errno.h> #include <xf86drm.h> int main(void) { int fd = open("/dev/dri/card0", O_RDWR); uint32_t syncobj; drmSyncobjCreate(fd, 0, &syncobj); struct timespec ts; clock_gettime(CLOCK_MONOTONIC, &ts); uint64_t point = 1; if (drmSyncobjTimelineWait(fd, &syncobj, &point, 1, ts.tv_sec * 1000000000 + ts.tv_nsec + 5000000000, // 5s DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE, NULL)) { printf("drmSyncobjTimelineWait failed %d\n", errno); } } Fixes: 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8") Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com> Reviewed by: Simon Ser <contact@emersion.fd> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/1fac96f1-2f3f-f9f9-4eb0-340f27a8f6c0@nvidia.com
2023-07-27Merge tag 'drm-misc-next-2023-07-21' of ↵Daniel Vetter1-6/+142
ssh://git.freedesktop.org/git/drm/drm-misc into drm-next drm-misc-next for 6.6: UAPI Changes: - syncobj: New DRM_IOCTL_SYNCOBJ_EVENTFD ioctl Cross-subsystem Changes: - Converge to use of_device_uevent() Core Changes: - GPU VA Manager - improvements to make it clearer that drm_minor_type is uAPI Driver Changes: - ssd130x: Improve intermediate buffer size computation - bridges: - adv7511: Fix low refresh rate - anx7625: Switch to macros instead of hardcoded values - panel: - ld9040: Backlight support, magic improved Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/urs7omo5xnhglztxgwgsslws7duqfj4jhzrtppaenuvdh2lwuz@4htm4iiqhkep
2023-07-20drm/syncobj: add IOCTL to register an eventfdSimon Ser1-6/+142
Introduce a new DRM_IOCTL_SYNCOBJ_EVENTFD IOCTL which signals an eventfd from a syncobj. This is useful for Wayland compositors to handle wait-before-submit. Wayland clients can send a timeline point to the compositor before the point has materialized yet, then compositors can wait for the point to materialize via this new IOCTL. The existing DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT IOCTL is not suitable because it blocks. Compositors want to integrate the wait with their poll(2)-based event loop. Requirements for new uAPI: - User-space patch: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4262 - IGT: https://lists.freedesktop.org/archives/igt-dev/2023-July/057893.html v2: - Wait for fence when flags is zero - Improve documentation (Pekka) - Rename IOCTL (Christian) - Fix typo in drm_syncobj_add_eventfd() (Christian) v3: - Link user-space + IGT patches - Add reference from overview docs v4: fix IOCTL number conflict with GETFB2 (Nicholas Choi, Vitaly Prosyak) Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Daniel Stone <daniel@fooishbar.org> Cc: James Jones <jajones@nvidia.com> Cc: Austin Shafer <ashafer@nvidia.com> Cc: Vitaly Prosyak <vprosyak@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714111257.11940-1-contact@emersion.fr
2023-07-06dma-buf: fix an error pointer vs NULL bugDan Carpenter1-2/+2
Smatch detected potential error pointer dereference. drivers/gpu/drm/drm_syncobj.c:888 drm_syncobj_transfer_to_timeline() error: 'fence' dereferencing possible ERR_PTR() The error pointer comes from dma_fence_allocate_private_stub(). One caller expected error pointers and one expected NULL pointers. Change it to return NULL and update the caller which expected error pointers, drm_syncobj_assign_null_handle(), to check for NULL instead. Fixes: f781f661e8c9 ("dma-buf: keep the signaling time of merged fences v3") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/b09f1996-3838-4fa2-9193-832b68262e43@moroto.mountain
2023-07-03dma-buf: keep the signaling time of merged fences v3Christian König1-1/+1
Some Android CTS is testing if the signaling time keeps consistent during merges. v2: use the current time if the fence is still in the signaling path and the timestamp not yet available. v3: improve comment, fix one more case to use the correct timestamp Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230630120041.109216-1-christian.koenig@amd.com
2022-06-13drm/syncobj: add missing error return code in drm_syncobj_transfer_to_timeline()Yang Yingliang1-1/+3
If dma_fence_unwrap_merge() fails, it should return error code in drm_syncobj_transfer_to_timeline() Fixes: ec8d985ff26f ("drm: use dma_fence_unwrap_merge() in drm_syncobj") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220613063454.2609364-1-yangyingliang@huawei.com
2022-05-30drm: use dma_fence_unwrap_merge() in drm_syncobjChristian König1-50/+7
The unwrap merge function is now intended for this use case. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220518135844.3338-6-christian.koenig@amd.com
2022-02-11drm/syncobj: flatten dma_fence_chains on transferChristian König1-5/+56
It is illegal to add a dma_fence_chain as timeline point. Flatten out the fences into a dma_fence_array instead. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nirmoy Das <nirmoy.das@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220209182600.434803-1-christian.koenig@amd.com
2021-12-08drm/syncobj: Deal with signalled fences in drm_syncobj_find_fence.Bas Nieuwenhuizen1-1/+10
dma_fence_chain_find_seqno only ever returns the top fence in the chain or an unsignalled fence. Hence if we request a seqno that is already signalled it returns a NULL fence. Some callers are not prepared to handle this, like the syncobj transfer functions for example. This behavior is "new" with timeline syncobj and it looks like not all callers were updated. To fix this behavior make sure that a successful drm_sync_find_fence always returns a non-NULL fence. v2: Move the fix to drm_syncobj_find_fence from the transfer functions. Fixes: ea569910cbab ("drm/syncobj: add transition iotcls between binary and timeline v2") Cc: stable@vger.kernel.org Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211208023935.17018-1-bas@basnieuwenhuizen.nl
2021-08-02drm: Fix typo in commentsCai Huoqing1-1/+1
fix typo for drm v1->v2: respin with the change "iff ==> implies that" Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210730132729.376-1-caihuoqing@baidu.com
2021-06-14dma-buf: add dma_fence_chain_alloc/free v3Christian König1-3/+3
Add a common allocation helper. Cleaning up the mix of kzalloc/kmalloc and some unused code in the selftest. v2: polish kernel doc a bit v3: polish kernel doc even a bit more Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210611120301.10595-3-christian.koenig@amd.com
2021-04-08drm/syncobj: use newly allocated stub fencesDavid Stevens1-6/+19
Allocate a new private stub fence in drm_syncobj_assign_null_handle, instead of using a static stub fence. When userspace creates a fence with DRM_SYNCOBJ_CREATE_SIGNALED or when userspace signals a fence via DRM_IOCTL_SYNCOBJ_SIGNAL, the timestamp obtained when the fence is exported and queried with SYNC_IOC_FILE_INFO should match when the fence's status was changed from the perspective of userspace, which is during the respective ioctl. When a static stub fence started being used in by these ioctls, this behavior changed. Instead, the timestamp returned by SYNC_IOC_FILE_INFO became the first time anything used the static stub fence, which has no meaning to userspace. Signed-off-by: David Stevens <stevensd@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210408095428.3983055-1-stevensd@google.com Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of ↵Dave Airlie1-0/+12
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-01-20drm/syncobj: make lockdep complain on WAIT_FOR_SUBMIT v3Christian König1-0/+12
DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT can't be used when we hold locks since we are basically waiting for userspace to do something. Holding a lock while doing so can trivial deadlock with page faults etc... So make lockdep complain when a driver tries to do this. v2: Add lockdep_assert_none_held() macro. v3: Add might_sleep() and also use lockdep_assert_none_held() in the IOCTL path. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patchwork.freedesktop.org/patch/414944/
2021-01-20drm/syncobj: Fix use-after-freeDaniel Vetter1-3/+5
While reviewing Christian's annotation patch I noticed that we have a user-after-free for the WAIT_FOR_SUBMIT case: We drop the syncobj reference before we've completed the waiting. Of course usually there's nothing bad happening here since userspace keeps the reference, but we can't rely on userspace to play nice here! Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Fixes: bc9c80fe01a2 ("drm/syncobj: use the timeline point in drm_syncobj_find_fence v4") Reviewed-by: Christian König <christian.koenig@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.2+ Link: https://patchwork.freedesktop.org/patch/msgid/20210119130318.615145-1-daniel.vetter@ffwll.ch
2020-08-02drm/syncobj: Tune down unordered timeline DRM_ERRORDaniel Vetter1-1/+1
Userspace can provoke this, we generally don't allow userspace to spam dmesg. Tune it down to debug. Unfortunately we don't have easy access to the drm_device here (not at all without changing a few things), so leave it as old style dmesg output for now. References: https://patchwork.freedesktop.org/series/80146/ Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: "Christian König" <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200801092625.1107609-1-daniel.vetter@ffwll.ch
2020-07-02drm : Insert blank lines after declarations.Suraj Upadhyay1-0/+1
Resolve checkpatch issues for missing blank lines after declarations. Issues found in multiple files with checkpatch.pl. Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200702131749.GA25710@blackclown
2020-01-20drm/syncobj: Add documentation for timeline syncobjLionel Landwerlin1-13/+74
We've added a set of new APIs to manipulate syncobjs holding timelines of dma_fence. This adds a bit of documentation about how this works. v2: Small language nits (Lionel) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/348578/ Cc: Christian Koenig <Christian.Koenig@amd.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: David(ChunMing) Zhou <David1.Zhou@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2019-10-18drm/syncobj: extend syncobj query ability v3Chunming Zhou1-15/+22
user space needs a flexiable query ability. So that umd can get last signaled or submitted point. v2: add sanitizer checking. v3: rebase Change-Id: I6512b430524ebabe715e602a2bf5abb0a7e780ea Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Christian König <Christian.Koenig@amd.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/series/64044/
2019-09-30drm/syncobj: Include the prototype for drm_timeout_abs_to_jiffies()Ville Syrjälä1-0/+1
Sparse complains: ../drivers/gpu/drm/drm_syncobj.c:942:13: warning: symbol 'drm_timeout_abs_to_jiffies' was not declared. Should it be static? Include the correct header with the prototype. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190710125143.9965-4-ville.syrjala@linux.intel.com Reviewed-by: Sean Paul <sean@poorly.run>
2019-08-12drm/syncobj: Add better overview documentation for syncobj (v2)Jason Ekstrand1-11/+87
This patch only brings the syncobj documentation up-to-date for the original form of syncobj. It does not contain any information about the design of timeline syncobjs. v2: Incorporate feedback from Lionel and Christian: - Mention actual ioctl and flag names - Better language around reference counting - Misc. language cleanups Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812142211.15885-1-jason@jlekstrand.net
2019-07-30drm/syncobj: fix leaking dma_fence in drm_syncobj_query_ioctlChristian König1-5/+5
We need to check the context number instead if the previous sequence to detect an error and if an error is detected we need to drop the reference to the current fence or otherwise would leak it. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 27b575a9aa2f ("drm/syncobj: add timeline payload query ioctl v6") Link: https://patchwork.freedesktop.org/patch/319123/
2019-07-20drm: direct include of drm.h in drm_syncobj.cSam Ravnborg1-0/+1
Do not rely on including drm.h from drm_file.h, as the include in drm_file.h will be dropped. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sean Paul <sean@poorly.run> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-10-sam@ravnborg.org
2019-05-27drm: drop use of drmP.h in drm/*Sam Ravnborg1-4/+9
The use of the drmP.h header file is deprecated. Remove use from all files in drm/* so people do not look there and follow a bad example. Build tested allyesconfig,allmodconfig on x86, arm etc. Including alpha that is as always more challenging than the rest. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org
2019-05-09Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-30/+419
Pull drm updates from Dave Airlie: "This has two exciting community drivers for ARM Mali accelerators. Since ARM has never been open source friendly on the GPU side of the house, the community has had to create open source drivers for the Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx series. Well done to all involved and hopefully this will help ARM head in the right direction. There is also now the ability if you don't have any of the legacy drivers enabled (pre-KMS) to remove all the pre-KMS support code from the core drm, this saves 10% or so in codesize on my machine. i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo moves out of staging. There are also some rcar-du patches which crossover with media tree but all should be acked by Mauro. Summary: uapi changes: - Colorspace connector property - fourcc - new YUV formts - timeline sync objects initially merged - expose FB_DAMAGE_CLIPS to atomic userspace new drivers: - vboxvideo: moved out of staging - aspeed: ASPEED SoC BMC chip display support - lima: ARM Mali4xx GPU acceleration driver support - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support core: - component helper docs - unplugging fixes - devm device init - MIPI/DSI rate control - shmem backed gem objects - connector, display_info, edid_quirks cleanups - dma_buf fence chain support - 64-bit dma-fence seqno comparison fixes - move initial fb config code to core - gem fence array helpers for Lima - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size) - lease fixes ttm: - unified DRM_FILE_PAGE_OFFSET handling - Account for kernel allocations in kernel zone only panel: - OSD070T1718-19TS panel support - panel-tpo-td028ttec1 backlight support - Ronbo RB070D30 MIPI/DSI - Feiyang FY07024DI26A30-D MIPI-DSI panel - Rocktech jh057n00900 MIPI-DSI panel i915: - Comet Lake (Gen9) PCI IDs - Updated Icelake PCI IDs - Elkhartlake (Gen11) support - DP MST property addtions - plane and watermark fixes - Icelake port sync and VEBOX disable fixes - struct_mutex usage reduction - Icelake gamma fix - GuC reset fixes - make mmap more asynchronous - sound display power well race fixes - DDI/MIPI-DSI clocks for Icelake - Icelake RPS frequency changing support - Icelake workarounds amdgpu: - Use HMM for userptr - vega20 experimental smu11 support - RAS support for vega20 - BACO support for vega12 + fixes for vega20 - reworked IH interrupt handling - amdkfd RAS support - Freesync improvements - initial timeline sync object support - DC Z ordering fixes - NV12 planes support - colorspace properties for planes= - eDP opts if eDP already initialized nouveau: - misc fixes etnaviv: - misc fixes msm: - GPU zap shader support expansion - robustness ABI addition exynos: - Logging cleanups tegra: - Shared reset fix - CPU cache maintenance fix cirrus: - driver rewritten using simple helpers meson: - G12A support vmwgfx: - Resource dirtying management improvements - Userspace logging improvements virtio: - PRIME fixes rockchip: - rk3066 hdmi support sun4i: - DSI burst mode support vc4: - load tracker to detect underflow v3d: - v3d v4.2 support malidp: - initial Mali D71 support in komeda driver tfp410: - omap related improvement omapdrm: - drm bridge/panel support - drop some omap specific panels rcar-du: - Display writeback support" * tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits) drm/msm/a6xx: No zap shader is not an error drm/cma-helper: Fix drm_gem_cma_free_object() drm: Fix timestamp docs for variable refresh properties. drm/komeda: Mark the local functions as static drm/komeda: Fixed warning: Function parameter or member not described drm/komeda: Expose bus_width to Komeda-CORE drm/komeda: Add sysfs attribute: core_id and config_id drm: add non-desktop quirk for Valve HMDs drm/panfrost: Show stored feature registers drm/panfrost: Don't scream about deferred probe drm/panfrost: Disable PM on probe failure drm/panfrost: Set DMA masks earlier drm/panfrost: Add sanity checks to submit IOCTL drm/etnaviv: initialize idle mask before querying the HW db drm: introduce a capability flag for syncobj timeline support drm: report consistent errors when checking syncobj capibility drm/nouveau/nouveau: forward error generated while resuming objects tree drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully" drm/nouveau/i2c: Disable i2c bus access after ->fini() drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition ...
2019-05-02drm_syncobj: switch to fdget()Al Viro1-7/+6
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-02drm: introduce a capability flag for syncobj timeline supportLionel Landwerlin1-5/+5
Unfortunately userspace users of this API cannot be publicly disclosed yet. This commit effectively disables timeline syncobj ioctls for all drivers. Each driver wishing to support this feature will need to expose DRIVER_SYNCOBJ_TIMELINE. v2: Add uAPI capability check (Christian) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Christian König <christian.koenig@amd.com> Cc: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190416125750.31370-1-lionel.g.landwerlin@intel.com
2019-05-02drm: report consistent errors when checking syncobj capibilityLionel Landwerlin1-2/+2
We've been somewhat inconsistent when adding the new ioctl and returned ENODEV instead of EOPNOTSUPPORTED upon failing the syncobj capibility. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: ea569910cbab98 ("drm/syncobj: add transition iotcls between binary and timeline v2") Fixes: 01d6c357837918 ("drm/syncobj: add support for timeline point wait v8") Cc: Dave Airlie <airlied@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> for the series. Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190416123048.2913-1-lionel.g.landwerlin@intel.com
2019-04-01drm/syncobj: add timeline signal ioctl for syncobj v5Chunming Zhou1-0/+73
v2: individually allocate chain array, since chain node is free independently. v3: all existing points must be already signaled before cpu perform signal operation, so add check condition for that. v4: remove v3 change and add checking to prevent out-of-order v5: unify binary and timeline Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: Tobias Hector <Tobias.Hector@amd.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/295792/?series=58813&rev=1
2019-04-01drm/syncobj: add transition iotcls between binary and timeline v2Chunming Zhou1-0/+74
we need to import/export timeline point. v2: unify to one transfer ioctl Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/295790/?series=58813&rev=1
2019-04-01drm/syncobj: use the timeline point in drm_syncobj_find_fence v4Christian König1-3/+47
Implement finding the right timeline point in drm_syncobj_find_fence. v2: return -EINVAL when the point is not submitted yet. v3: fix reference counting bug, add flags handling as well v4: add timeout for find fence Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/295786/?series=58813&rev=1
2019-04-01drm/syncobj: add timeline payload query ioctl v6Chunming Zhou1-0/+62
user mode can query timeline payload. v2: check return value of copy_to_user v3: handle querying entry by entry v4: rebase on new chain container, simplify interface v5: query last signaled timeline point, not last point. v6: add unorder point check Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: Tobias Hector <Tobias.Hector@amd.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/295784/?series=58813&rev=1
2019-04-01drm/syncobj: add support for timeline point wait v8Chunming Zhou1-29/+124
points array is one-to-one match with syncobjs array. v2: add seperate ioctl for timeline point wait, otherwise break uapi. v3: userspace can specify two kinds waits:: a. Wait for time point to be completed. b. and wait for time point to become available v4: rebase v5: add comment for xxx_WAIT_AVAILABLE v6: rebase and rework on new container v7: drop _WAIT_COMPLETED, it is the default anyway v8: correctly handle garbage collected fences Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: Tobias Hector <Tobias.Hector@amd.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/295782/?series=58813&rev=1
2019-04-01drm/syncobj: add new drm_syncobj_add_point interface v4Christian König1-0/+40
Use the dma_fence_chain object to create a timeline of fence objects instead of just replacing the existing fence. v2: rebase and cleanup v3: fix garbage collection parameters v4: add unorder point check, print a warn calltrace Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/295780/?series=58813&rev=1
2019-03-07drm: export drm_timeout_abs_to_jiffiesQiang Yu1-1/+2
For other driver like lima usage. Cc: Rob Herring <robh@kernel.org> Signed-off-by: Qiang Yu <yuq825@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190225140717.20586-2-yuq825@gmail.com
2018-12-11drm/syncobj: remove drm_syncobj_cb and cleanupChristian König1-61/+30
This completes "drm/syncobj: Drop add/remove_callback from driver interface" and cleans up the implementation a bit. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Link: https://patchwork.freedesktop.org/patch/266255/
2018-12-05drm: revert "expand replace_fence to support timeline point v2"Christian König1-8/+6
This reverts commit 9a09a42369a4a37a959c051d8e1a1f948c1529a4. The whole interface isn't thought through. Since this function can't fail we actually can't allocate an object to store the sync point. Sorry, I should have taken the lead on this from the very beginning and reviewed it more thoughtfully. Going to propose a new interface as a follow up change. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Link: https://patchwork.freedesktop.org/patch/265580/
2018-12-03drm/syncobj: use dma_fence_get_stubChristian König1-44/+14
Extract of useful code from the timeline work. Let's use just a single stub fence instance instead of allocating a new one all the time. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Link: https://patchwork.freedesktop.org/patch/265248/
2018-11-12drm/syncobj: Fix compilation following partial revertChris Wilson1-4/+0
We need to include the revert of commit 783195ec1cad ("drm/syncobj: disable the timeline UAPI for now v2") along with undoing the change to drm/i915. Fixes: 131280a162e7 ("drm: Revert syncobj timeline changes.") Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181112152130.12275-1-chris@chris-wilson.co.uk
2018-11-12drm: Revert syncobj timeline changes.Eric Anholt1-288/+71
Daniel suggested I submit this, since we're still seeing regressions from it. This is a revert to before 48197bc564c7 ("drm: add syncobj timeline support v9") and its followon fixes. Fixes this on first V3D testcase execution: [ 48.767088] ============================================ [ 48.772410] WARNING: possible recursive locking detected [ 48.777739] 4.19.0-rc6+ #489 Not tainted [ 48.781668] -------------------------------------------- [ 48.786993] shader_runner/3284 is trying to acquire lock: [ 48.792408] ce309d7f (&(&array->lock)->rlock){....}, at: dma_fence_add_callback+0x30/0x23c [ 48.800714] [ 48.800714] but task is already holding lock: [ 48.806559] c5952bd3 (&(&array->lock)->rlock){....}, at: dma_fence_add_callback+0x30/0x23c [ 48.814862] [ 48.814862] other info that might help us debug this: [ 48.821410] Possible unsafe locking scenario: [ 48.821410] [ 48.827338] CPU0 [ 48.829788] ---- [ 48.832239] lock(&(&array->lock)->rlock); [ 48.836434] lock(&(&array->lock)->rlock); [ 48.840640] [ 48.840640] *** DEADLOCK *** [ 48.840640] [ 48.846582] May be due to missing lock nesting notation [ 130.763560] 1 lock held by cts-runner/3270: [ 130.767745] #0: 7834b793 (&(&array->lock)->rlock){-...}, at: dma_fence_add_callback+0x30/0x23c [ 130.776461] stack backtrace: [ 130.780825] CPU: 1 PID: 3270 Comm: cts-runner Not tainted 4.19.0-rc6+ #486 [ 130.787706] Hardware name: Broadcom STB (Flattened Device Tree) [ 130.793645] [<c021269c>] (unwind_backtrace) from [<c020db1c>] (show_stack+0x10/0x14) [ 130.801404] [<c020db1c>] (show_stack) from [<c0c2c4b0>] (dump_stack+0xa8/0xd4) [ 130.808642] [<c0c2c4b0>] (dump_stack) from [<c0281a84>] (__lock_acquire+0x848/0x1a68) [ 130.816483] [<c0281a84>] (__lock_acquire) from [<c02835d8>] (lock_acquire+0xd8/0x22c) [ 130.824326] [<c02835d8>] (lock_acquire) from [<c0c49948>] (_raw_spin_lock_irqsave+0x54/0x68) [ 130.832777] [<c0c49948>] (_raw_spin_lock_irqsave) from [<c086bf54>] (dma_fence_add_callback+0x30/0x23c) [ 130.842183] [<c086bf54>] (dma_fence_add_callback) from [<c086d4c8>] (dma_fence_array_enable_signaling+0x58/0xec) [ 130.852371] [<c086d4c8>] (dma_fence_array_enable_signaling) from [<c086c00c>] (dma_fence_add_callback+0xe8/0x23c) [ 130.862647] [<c086c00c>] (dma_fence_add_callback) from [<c06d8774>] (drm_syncobj_wait_ioctl+0x518/0x614) [ 130.872143] [<c06d8774>] (drm_syncobj_wait_ioctl) from [<c06b8458>] (drm_ioctl_kernel+0xb0/0xf0) [ 130.880940] [<c06b8458>] (drm_ioctl_kernel) from [<c06b8818>] (drm_ioctl+0x1d8/0x390) [ 130.888782] [<c06b8818>] (drm_ioctl) from [<c03a4510>] (do_vfs_ioctl+0xb0/0x8ac) [ 130.896187] [<c03a4510>] (do_vfs_ioctl) from [<c03a4d40>] (ksys_ioctl+0x34/0x60) [ 130.903593] [<c03a4d40>] (ksys_ioctl) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/261044/
2018-11-08drm/syncobj: disable the timeline UAPI for now v2Christian König1-0/+4
Until we have sorted out all problems. v2: return -EINVAL during create if flag is set. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/260937/
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-31 16:51:35 +0300