summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/drm_vblank.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-14drm/atomic-helper: Remove the timestamping constant update from ↵Ville Syrjälä1-2/+2
drm_atomic_helper_update_legacy_modeset_state() The timestamping constants have nothing to do with any legacy state so should not be updated from drm_atomic_helper_update_legacy_modeset_state(). Let's make everyone call drm_atomic_helper_calc_timestamping_constants() directly instead of relying on drm_atomic_helper_update_legacy_modeset_state() to call it. @@ expression S; @@ - drm_atomic_helper_calc_timestamping_constants(S); @@ expression D, S; @@ drm_atomic_helper_update_legacy_modeset_state(D, S); + drm_atomic_helper_calc_timestamping_constants(S); v2: Update drm_crtc_vblank_helper_get_vblank_timestamp{,_internal}() docs (Daniel) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-2-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-07-21drm/vblank: Use spin_(un)lock_irq() in drm_crtc_queue_sequence_ioctl()Lyude Paul1-4/+3
This is an ioctl callback, so we're guaranteed to have IRQs enabled when calling this function. Use the plain _irq() variants of spin_(un)lock() to make this more obvious. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-6-lyude@redhat.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-07-21drm/vblank: Use spin_(un)lock_irq() in drm_queue_vblank_event()Lyude Paul1-4/+3
This one's easy - we're already calling kzalloc(GFP_KERNEL) in this function, so we must already be guaranteed to have IRQs enabled when calling this. So, use the plain _irq() variants of spin_(un)lock() to make this more obvious. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-5-lyude@redhat.com
2020-07-21drm/vblank: Use spin_(un)lock_irq() in drm_legacy_vblank_post_modeset()Lyude Paul1-3/+2
This function is only ever called from ioctl context, so we're guaranteed to have interrupts enabled. Stop using the irqsave/irqrestore variants of spin_(un)lock_irq() to make this more obvious. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-4-lyude@redhat.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-07-21drm/vblank: Use spin_(un)lock_irq() in drm_crtc_vblank_on()Lyude Paul1-3/+2
This is only called from: * Atomic modesetting hooks * Module probing routines * Legacy modesetting hooks All of which have IRQs enabled, so we can also get rid of irqsave/restore here to make the IRQ context of this function more obvious. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-3-lyude@redhat.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-07-21drm/vblank: Use spin_(un)lock_irq() in drm_crtc_vblank_reset()Lyude Paul1-3/+2
All of the drivers in the kernel tree only call this from one of the following contexts: * drm_crtc_funcs->reset * During initial module load Since both of these contexts are guaranteed to have interrupts enabled beforehand, there's no need to use the irqsave/irqrestore variants of spin_(un)lock(). So, fix this to make the irq context of this function more obvious. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-2-lyude@redhat.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-07-17drm/vblank: Add vblank worksLyude Paul1-15/+29
Add some kind of vblank workers. The interface is similar to regular delayed works, and is mostly based off kthread_work. It allows for scheduling delayed works that execute once a particular vblank sequence has passed. It also allows for accurate flushing of scheduled vblank works - in that flushing waits for both the vblank sequence and job execution to complete, or for the work to get cancelled - whichever comes first. Whatever hardware programming we do in the work must be fast (must at least complete during the vblank or scanout period, sometimes during the first few scanlines of the vblank). As such we use a high-priority per-CRTC thread to accomplish this. Changes since v7: * Stuff drm_vblank_internal.h and drm_vblank_work_internal.h contents into drm_internal.h * Get rid of unnecessary spinlock in drm_crtc_vblank_on() * Remove !vblank->worker check * Grab vbl_lock in drm_vblank_work_schedule() * Mention self-rearming work items in drm_vblank_work_schedule() kdocs * Return 1 from drm_vblank_work_schedule() if the work was scheduled successfully, 0 or error code otherwise * Use drm_dbg_core() instead of DRM_DEV_ERROR() in drm_vblank_work_schedule() * Remove vblank->worker checks in drm_vblank_destroy_worker() and drm_vblank_flush_worker() Changes since v6: * Get rid of ->pending and seqcounts, and implement flushing through simpler means - danvet * Get rid of work_lock, just use drm_device->event_lock * Move drm_vblank_work item cleanup into drm_crtc_vblank_off() so that we ensure that all vblank work has finished before disabling vblanks * Add checks into drm_crtc_vblank_reset() so we yell if it gets called while there's vblank workers active * Grab event_lock in both drm_crtc_vblank_on()/drm_crtc_vblank_off(), the main reason for this is so that other threads calling drm_vblank_work_schedule() are blocked from attempting to schedule while we're in the middle of enabling/disabling vblanks. * Move drm_handle_vblank_works() call below drm_handle_vblank_events() * Simplify drm_vblank_work_cancel_sync() * Fix drm_vblank_work_cancel_sync() documentation * Move wake_up_all() calls out of spinlock where we can. The only one I left was the call to wake_up_all() in drm_vblank_handle_works() as this seemed like it made more sense just living in that function (which is all technically under lock) * Move drm_vblank_work related functions into their own source files * Add drm_vblank_internal.h so we can export some functions we don't want drivers using, but that we do need to use in drm_vblank_work.c * Add a bunch of documentation Changes since v4: * Get rid of kthread interfaces we tried adding and move all of the locking into drm_vblank.c. For implementing drm_vblank_work_flush(), we now use a wait_queue and sequence counters in order to differentiate between multiple work item executions. * Get rid of drm_vblank_work_cancel() - this would have been pretty difficult to actually reimplement and it occurred to me that neither nouveau or i915 are even planning to use this function. Since there's also no async cancel function for most of the work interfaces in the kernel, it seems a bit unnecessary anyway. * Get rid of to_drm_vblank_work() since we now are also able to just pass the struct drm_vblank_work to work item callbacks anyway Changes since v3: * Use our own spinlocks, don't integrate so tightly with kthread_works Changes since v2: * Use kthread_workers instead of reinventing the wheel. Cc: Tejun Heo <tj@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Co-developed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Dave Airlie <airlied@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-4-lyude@redhat.com
2020-07-17drm/vblank: Use spin_(un)lock_irq() in drm_crtc_vblank_off()Lyude Paul1-3/+2
This got me confused for a bit while looking over this code: I had been planning on adding some blocking function calls into this function, but seeing the irqsave/irqrestore variants of spin_(un)lock() didn't make it very clear whether or not that would actually be safe. So I went ahead and reviewed every single driver in the kernel that uses this function, and they all fall into three categories: * Driver probe code * ->atomic_disable() callbacks * Legacy modesetting callbacks All of these will be guaranteed to have IRQs enabled, which means it's perfectly safe to block here. Just to make things a little less confusing to others in the future, let's switch over to spin_lock_irq()/spin_unlock_irq() to make that fact a little more obvious. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-3-lyude@redhat.com
2020-07-17drm/vblank: Register drmm cleanup action once per drm_vblank_crtcLyude Paul1-13/+10
Since we'll be allocating resources for kthread_create_worker() in the next commit (which could fail and require us to clean up the mess), let's simplify the cleanup process a bit by registering a drm_vblank_init_release() action for each drm_vblank_crtc so they're still cleaned up if we fail to initialize one of them. Changes since v3: * Use drmm_add_action_or_reset() - Daniel Vetter Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Dave Airlie <airlied@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-2-lyude@redhat.com
2020-07-02drm : Insert blank lines after declarations.Suraj Upadhyay1-0/+1
Resolve checkpatch issues for missing blank lines after declarations. Issues found in multiple files with checkpatch.pl. Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200702131749.GA25710@blackclown
2020-05-31drm/vblank: use drm_WARN for all warningsSam Ravnborg1-33/+35
Replace all the WARN_* variants with their drm_WARN counterparts. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Lyude Paul <lyude@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200523071224.1716837-3-sam@ravnborg.org
2020-05-31drm/vblank: use drm_* functions for loggingSam Ravnborg1-58/+75
Replace all DRM_* logging functions with their drm_ counterparts. checkpatch emits a few "quoted string split across lines", which is left as is. The strings was already split in the original code base and it would not increase readability to fix them. v2: - added braces to if statement (Thomas) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Lyude Paul <lyude@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200523071224.1716837-2-sam@ravnborg.org
2020-05-29drm: use drm_dev_has_vblank moreDaniel Vetter1-7/+7
For historical reasons it's called dev->num_crtcs, which is rather confusing ever since kms was added. But now we have a nice helper, so let's use it for better readability! Only code change is in atomic helpers: vblank support means that dev->irq_enabled must be set too. Another one of these quirky things ... But since it's implied we can simplify that check. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200527111134.1571781-1-daniel.vetter@ffwll.ch
2020-05-23drm/vblank: Fix -Wformat compile warnings on some archesLyude Paul1-2/+2
On some architectures like ppc64le and aarch64, compiling with -Wformat=1 will throw the following warnings: In file included from drivers/gpu/drm/drm_vblank.c:33: drivers/gpu/drm/drm_vblank.c: In function 'drm_update_vblank_count': drivers/gpu/drm/drm_vblank.c:273:16: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type 'long int' [-Wformat=] DRM_DEBUG_VBL("updating vblank count on crtc %u:" ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/drm/drm_print.h:407:22: note: in definition of macro 'DRM_DEBUG_VBL' drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__) ^~~ drivers/gpu/drm/drm_vblank.c:274:22: note: format string is defined here " current=%llu, diff=%u, hw=%u hw_last=%u\n", ~~~^ %lu So, fix that with a typecast. Signed-off-by: Lyude Paul <lyude@redhat.com> Co-developed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fixed too long line] Link: https://patchwork.freedesktop.org/patch/msgid/20200521204647.2578479-1-lyude@redhat.com
2020-05-14drm/vblank: remove outdated and noisy outputWolfram Sang1-2/+0
The R-Car DU driver calls drm_vblank_init via some helper functions in probe(). From what I checked, most drivers do this as well. I have a config now where DU always stays in deferred_probe state because of a missing dependency. This means that every time I rebind another driver like MMC, the vblank init message is displayed again when the DU driver is retried. Because the message doesn't really carry a useful information, I suggest to simply drop it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200513201016.23047-1-wsa+renesas@sang-engineering.com
2020-04-07drm/vblank: Add intro to documentationSam Ravnborg1-0/+63
Lyude Paul wrote a very good intro to vblank here: https://lore.kernel.org/dri-devel/faf63d8a9ed23c16af69762f59d0dca6b2bf085f.camel@redhat.com/T/#mce6480be738160e9d07c5d023e88fd78d7a06d27 Add this to the intro chapter in drm_vblank.c so others can benefit from it too. v2: - Reworded to improve readability (Thomas) v3: - Added nice ascii drawing from Lyude (Lyude) - Added referende to high-precision timestamp (Daniel) - Improved grammar (Thomas) - Combined it all and made kernel-doc happy - Dropped any a-b, r-b do to the amount of changes v4: - Add intro to vblank interrupt (Liviu) - Add historical reference for blanking (Alex) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Co-developed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20200406194746.26433-2-sam@ravnborg.org
2020-03-26drm: Manage drm_vblank_cleanup with drmm_Daniel Vetter1-19/+12
Nothing special here, except that this is the first time that we automatically clean up something that's initialized with an explicit driver call. But the cleanup was done at the very end of the release sequence for all drivers, and that's still the case. At least without more uses of drmm_ through explicit driver calls. Also for this one we need drmm_kcalloc, so lets add those. The motivation here is to allow us to remove the explicit calls to drm_dev_fini() from all drivers. v2: Sort includes (Laurent) v3: Motivate the change in the commit message better (Sam) Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-25-daniel.vetter@ffwll.ch
2020-03-06drm/vblank: Fix documentation of VBLANK timestamp helperThomas Zimmermann1-2/+1
Per-CRTC VBLANK information used to be addressed by device and pipe index. A call drm_crtc_vblank_helper_get_vblank_timestamp_internal() receives a pointer to the CRTC instead. Fix the documentation. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: f1e2b6371c12 ("drm: Add get_scanout_position() to struct drm_crtc_helper_funcs") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20200303073135.10605-1-tzimmermann@suse.de
2020-02-13drm: Remove legacy version of get_scanout_position()Thomas Zimmermann1-20/+7
The legacy version of get_scanout_position() was only useful while drivers still used drm_driver.get_scanout_position(). With no such drivers left, the related typedef and code can be removed Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-23-tzimmermann@suse.de
2020-02-13drm: Clean-up VBLANK-related callbacks in struct drm_driverThomas Zimmermann1-72/+9
All non-legacy users of VBLANK functions in struct drm_driver have been converted to use the respective interfaces in struct drm_crtc_funcs. The remaining users of VBLANK callbacks in struct drm_driver are legacy drivers with userspace modesetting. All users of struct drm_driver.get_scanout_position() have been converted to the respective CRTC helper function. Remove the callback from struct drm_driver. There are no users left of get_vblank_timestamp(), so the callback is being removed. The other VBLANK callbacks are being moved to the legacy section at the end of struct drm_driver. Also removed is drm_calc_vbltimestamp_from_scanoutpos(). Callers of this function have been converted to use the CRTC instead. v4: * more readable code for setting high_prec (Ville, Jani) v2: * merge with removal of struct drm_driver.get_scanout_position() * remove drm_calc_vbltimestamp_from_scanoutpos() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Yannick Fertré <yannick.fertre@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-22-tzimmermann@suse.de
2020-02-13drm: Add get_vblank_timestamp() to struct drm_crtc_funcsThomas Zimmermann1-9/+67
The callback get_vblank_timestamp() is currently located in struct drm_driver, but really belongs into struct drm_crtc_funcs. Add an equivalent there. Driver will be converted in separate patches. The default implementation is drm_calc_vbltimestamp_from_scanoutpos(). The patch adds drm_crtc_vblank_helper_get_vblank_timestamp(), which is an implementation for the CRTC callback. v4: * more readable code for setting high_prec (Ville, Jani) v3: * use refactored timestamp calculation to minimize duplicated code * do more checks for crtc != NULL to support legacy drivers v2: * rename helper to drm_crtc_vblank_helper_get_vblank_timestamp() * replace drm_calc_vbltimestamp_from_scanoutpos() with drm_crtc_vblank_helper_get_vblank_timestamp() in docs Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-4-tzimmermann@suse.de
2020-02-13drm: Add get_scanout_position() to struct drm_crtc_helper_funcsThomas Zimmermann1-18/+83
The new callback get_scanout_position() reads the current location of the scanout process. The operation is currently located in struct drm_driver, but really belongs to the CRTC. Drivers will be converted in separate patches. To help with the conversion, the timestamp calculation has been moved from drm_calc_vbltimestamp_from_scanoutpos() to drm_crtc_vblank_helper_get_vblank_timestamp_internal(). The helper function supports the new and old interface of get_scanout_position(). drm_calc_vbltimestamp_from_scanoutpos() remains as a wrapper around the new function. Callback functions return the scanout position from the CRTC. The legacy version of the interface receives the device and pipe index, the modern version receives a pointer to the CRTC. We keep the legacy version until all drivers have been converted. v4: * 80-character line fixes v3: * refactor drm_calc_vbltimestamp_from_scanoutpos() to minimize code duplication * define types for get_scanout_position() callbacks v2: * fix logical op in drm_calc_vbltimestamp_from_scanoutpos() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Yannick Fertré <yannick.fertre@st.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-3-tzimmermann@suse.de
2020-02-13drm: Remove internal setup of struct drm_device.vblank_disable_immediateThomas Zimmermann1-13/+0
VBLANK interrupts can be disabled immediately or with a delay, where the latter is the default. The former option can be selected by setting get_vblank_timestamp and enabling vblank_disable_immediate in struct drm_device. Simplify the code in preparation of the removal of struct drm_device.get_vblank_timestamp. v3: * remove internal setup of vblank_disable_immediate Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-2-tzimmermann@suse.de
2020-01-30drm: Initialize struct drm_crtc_state.no_vblank from device settingsThomas Zimmermann1-0/+28
At the end of a commit, atomic helpers can generate a fake VBLANK event automatically. Originally implemented for writeback connectors, the functionality can be used by any driver and/or hardware without proper VBLANK interrupt. The patch updates the documentation to make this behaviour official: settings struct drm_crtc_state.no_vblank to true enables automatic generation of fake VBLANK events. The new interface drm_dev_has_vblank() returns true if vblanking has been initialized for a device, or false otherwise. Atomic helpers use this function when initializing no_vblank in the CRTC state in drm_atomic_helper_check_modeset(). If vblanking has been initialized for a device, no_blank is disabled. Otherwise it's enabled. Hence, atomic helpers will automatically send out fake VBLANK events with any driver that did not initialize vblanking. v5: * more precise documentation and commit message v4: * replace drm_crtc_has_vblank() with drm_dev_has_vblank() * add drm_dev_has_vblank() in this patch * move driver changes into separate patches v3: * squash all related changes patches into this patch Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-2-tzimmermann@suse.de
2019-10-09drm/drm_vblank: Change EINVAL by the correct errnoRodrigo Siqueira1-3/+3
For historical reasons, the function drm_wait_vblank_ioctl always return -EINVAL if something gets wrong. This scenario limits the flexibility for the userspace to make detailed verification of any problem and take some action. In particular, the validation of “if (!dev->irq_enabled)” in the drm_wait_vblank_ioctl is responsible for checking if the driver support vblank or not. If the driver does not support VBlank, the function drm_wait_vblank_ioctl returns EINVAL, which does not represent the real issue; this patch changes this behavior by return EOPNOTSUPP. Additionally, drm_crtc_get_sequence_ioctl and drm_crtc_queue_sequence_ioctl, also returns EINVAL if vblank is not supported; this patch also changes the return value to EOPNOTSUPP in these functions. Lastly, these functions are invoked by libdrm, which is used by many compositors; because of this, it is important to check if this change breaks any compositor. In this sense, the following projects were examined: * Drm-hwcomposer * Kwin * Sway * Wlroots * Wayland * Weston * Mutter * Xorg (67 different drivers) For each repository the verification happened in three steps: * Update the main branch * Look for any occurrence of "drmCrtcQueueSequence", "drmCrtcGetSequence", and "drmWaitVBlank" with the command git grep -n "STRING". * Look in the git history of the project with the command git log -S<STRING> None of the above projects validate the use of EINVAL when using drmWaitVBlank(), which make safe, at least for these projects, to change the return values. On the other hand, mesa and xserver project uses drmCrtcQueueSequence() and drmCrtcGetSequence(); this change is harmless for both projects. Change since V5 (Pekka Paalanen): - Check if the change also affects Mutter Change since V4 (Daniel): - Also return EOPNOTSUPP in drm_crtc_[get|queue]_sequence_ioctl Change since V3: - Return EINVAL for _DRM_VBLANK_SIGNAL (Daniel) Change since V2: Daniel Vetter and Chris Wilson - Replace ENOTTY by EOPNOTSUPP - Return EINVAL if the parameters are wrong Cc: Keith Packard <keithp@keithp.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002140516.adeyj3htylimmlmg@smtp.gmail.com
2019-10-02drm/print: add drm_debug_enabled()Jani Nikula1-3/+3
Add helper to check if a drm debug category is enabled. Convert drm core to use it. No functional changes. v2: Move unlikely() to drm_debug_enabled() (Eric) v3: Keep unlikely() when combined with other conditions (Eric) Cc: Eric Engestrom <eric@engestrom.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Eric Engestrom <eric@engestrom.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191001140614.26909-1-jani.nikula@intel.com
2019-09-03drm/vblank: Document and fix vblank count barrier semanticsDaniel Vetter1-4/+41
Noticed while reviewing code. I'm not sure whether this might or might not explain some of the missed vblank hilarity we've been seeing on various drivers (but those got tracked down to driver issues, at least mostly). I think those all go through the vblank completion event, which has unconditional barriers - it always takes the spinlock. Therefore no cc stable. v2: - Barrriers are hard, put them in in the right order (Chris). - Improve the comments a bit. v3: Ville noticed that on 32bit we might be breaking up the load/stores, now that the vblank counter has been switched over to be 64 bit. Fix that up by switching to atomic64_t. This this happens so rarely in practice I figured no need to cc: stable ... Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Keith Packard <keithp@keithp.com> References: 570e86963a51 ("drm: Widen vblank count to 64-bits [v3]") Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190723131337.22031-1-daniel.vetter@ffwll.ch
2019-09-03drm: Add high-precision time to vblank trace eventHeinrich Fink1-1/+2
Store the timestamp of the current vblank in the new field 'time' of the vblank trace event. If the timestamp is calculated by a driver that supports high-precision vblank timing, set the field 'high-prec' to 'true'. User space can now access actual hardware vblank times via the tracing infrastructure. Tracing applications (such as GPUVis, see [0] for related discussion), can use the newly added information to conduct a more accurate analysis of display timing. v2 Fix author name (missing last name) [0] https://github.com/mikesart/gpuvis/issues/30 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Heinrich Fink <heinrich.fink@daqri.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190902142412.27846-2-heinrich.fink@daqri.com
2019-08-03drm/vblank: drop use of DRM_WAIT_ON()Sam Ravnborg1-5/+20
DRM_WAIT_ON() is from the deprecated drm_os_linux header and the modern replacement is the wait_event_*. The return values differ, so a conversion is needed to keep the original interface towards userspace. Introduced a switch/case to make code obvious. Analysis from Michel Dänzer: The waiting condition rely on all relevant places where vblank_count is modified calls wake_up(&vblank->queue). drm_handle_vblank(): - Calls wake_up(&vblank->queue) drm_vblank_enable(): - There is no need here because there can be no sleeping waiters in the queue, because vblank->enabled == false immediately terminates any waits. drm_crtc_accurate_vblank_count(): - This is called from interrupt handlers, at least from amdgpu_dm.c:dm_pflip_high_irq(). Not sure it needs to wake up the queue though, the driver should call drm_(crtc_)_handle_vblank anyway. drm_vblank_disable_and_save(): - It can be called from an interrupt, via drm_handle_vblank -> vblank_disable_fn. However, the only place where drm_vblank_disable_and_save can be called with sleeping waiters in the queue is in drm_crtc_vblank_off, which wakes up the queue afterwards (which terminates all waits, because vblank->enabled == false at this point). v3: - Added analysis to changelog from Michel Dänzer - Moved return result handling inside if (req_seq != seq) (Daniel V) - Reused more of the former logic - resulting in simpler code - Dropped Reviewed-by from Sean Paul as this is a new implementation v2: - Fix so the case where req_seq equals seq was handled properly - quick hack to check if IGT became happy - Only sent to igt, not to dri-devel Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: Sean Paul <sean@poorly.run> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190726210658.GA6299@ravnborg.org
2019-06-14drm: add debug print to update_vblank_countOleg Vasilev1-3/+7
Since we are logging all vblank counter updates 30 lines below, it is also good to have some details whether and how vblank count difference is calculated. Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613121802.2193-1-oleg.vasilev@intel.com
2019-05-27drm: drop use of drmP.h in drm/*Sam Ravnborg1-3/+9
The use of the drmP.h header file is deprecated. Remove use from all files in drm/* so people do not look there and follow a bad example. Build tested allyesconfig,allmodconfig on x86, arm etc. Including alpha that is as always more challenging than the rest. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org
2019-02-04drm: Trivial comment grammar cleanupsMatt Roper1-1/+1
Most of these are just cases where code comments used contractions (it's, who's) where they actually mean to use a possessive pronoun (its, whose) or vice-versa. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190202012326.20096-1-matthew.d.roper@intel.com
2019-01-14drm/vblank: Allow dynamic per-crtc max_vblank_countVille Syrjälä1-3/+42
On i965gm we need to adjust max_vblank_count dynamically depending on whether the TV encoder is used or not. To that end add a per-crtc max_vblank_count that takes precedence over its device wide counterpart. The driver can now call drm_crtc_set_max_vblank_count() to configure the per-crtc value before calling drm_vblank_on(). Also looks like there was some discussion about exynos needing similar treatment. v2: Drop the extra max_vblank_count!=0 check for the WARN(last!=current), will take care of it in i915 code (Daniel) WARN_ON(!inmodeset) (Daniel) WARN_ON(dev->max_vblank_count) Pimp up the docs (Daniel) Cc: stable@vger.kernel.org Cc: Inki Dae <inki.dae@samsung.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181127182004.28885-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-09-14drm: Differentiate the lack of an interface from invalid parameterChris Wilson1-2/+2
If the ioctl is not supported on a particular piece of HW/driver combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily distinguished from both the lack of the ioctl and from a regular invalid parameter. v2: Across all the kms ioctls we had a mixture of reporting EINVAL, ENODEV and a few ENOTSUPP (most where EINVAL) for a failed drm_core_check_feature(). Update everybody to report ENOTSUPP. v3: ENOTSUPP is an internal errno! It's value (524) does not correspond to a POSIX errno, the one we want is ENOTSUP. However, uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says "ENOTSUP and EOPNOTSUPP have the same value on Linux, but according to POSIX.1 these error values should be distinct." so use EOPNOTSUPP as its equivalent. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
2018-09-04drm: Suppress user controlled spam for invalid drm_wait_vblank_ioctlChris Wilson1-1/+1
The ioctl arguments are under control of the user and as such we should resist any temptation to flood the kernel logs with their errors. Relegate the DRM_ERROR to a DRM_DEBUG so the user has to opt into hearing of their own mistakes. (One day we will have a small ringbuffer attached to the task, so that the concerned process can inspect its own debug info for EINVAL without them being hitting syslog at all.) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180904115719.24525-1-chris@chris-wilson.co.uk
2018-08-08drm/doc: clarify how to acquire required vblank event referenceStefan Agner1-2/+2
As a driver write it is not entirely obvious that a reference to the event e mentioned in the doc can be obtained via drm_crtc_vblank_get(). Clarify how to obtain the reference. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180807201143.7446-1-stefan@agner.ch
2018-03-14Merge tag 'drm-intel-next-2018-03-08' of ↵Dave Airlie1-8/+14
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Query uAPI interface (used for GPU topology information currently) * Mesa: https://patchwork.freedesktop.org/series/38795/ Driver Changes: - Increase PSR2 size for CNL (DK) - Avoid retraining LSPCON link unnecessarily (Ville) - Decrease request signaling latency (Chris) - GuC error capture fix (Daniele) * tag 'drm-intel-next-2018-03-08' of git://anongit.freedesktop.org/drm/drm-intel: (127 commits) drm/i915: Update DRIVER_DATE to 20180308 drm/i915: add schedule out notification of preempted but completed request drm/i915: expose rcs topology through query uAPI drm/i915: add query uAPI drm/i915: add rcs topology to error state drm/i915/debugfs: add rcs topology entry drm/i915/debugfs: reuse max slice/subslices already stored in sseu drm/i915: store all subslice masks drm/i915/guc: work around gcc-4.4.4 union initializer issue drm/i915/cnl: Add Wa_2201832410 drm/i915/icl: Gen11 forcewake support drm/i915/icl: Add Indirect Context Offset for Gen11 drm/i915/icl: Enhanced execution list support drm/i915/icl: new context descriptor support drm/i915/icl: Correctly initialize the Gen11 engines drm/i915: Assert that the request is indeed complete when signaled from irq drm/i915: Handle changing enable_fbc parameter at runtime better. drm/i915: Track whether the DP link is trained or not drm/i915: Nuke intel_dp->channel_eq_status drm/i915: Move SST DP link retraining into the ->post_hotplug() hook ...
2018-03-14Merge tag 'drm-misc-next-2018-03-09-3' of ↵Dave Airlie1-0/+9
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.17: UAPI Changes: plane: Add color encoding/range properties (Jyri) nouveau: Replace iturbt_709 property with color_encoding property (Ville) Core Changes: atomic: Move plane clipping into plane check helper (Ville) property: Multiple new property checks/verification (Ville) Driver Changes: rockchip: Fixes & improvements for rk3399/chromebook plus (various) sun4i: Add H3/H5 HDMI support (Jernej) i915: Add support for limited/full-range ycbcr toggling (Ville) pl111: Add bandwidth checking/limiting (Linus) Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Jyri Sarha <jsarha@ti.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> * tag 'drm-misc-next-2018-03-09-3' of git://anongit.freedesktop.org/drm/drm-misc: (85 commits) drm/rockchip: Don't use atomic constructs for psr drm/rockchip: analogix_dp: set psr activate/deactivate when enable/disable bridge drm/rockchip: dw_hdmi: Move HDMI vpll clock enable to bind() drm/rockchip: inno_hdmi: reorder clk_disable_unprepare call in unbind drm/rockchip: inno_hdmi: Fix error handling path. drm/rockchip: dw-mipi-dsi: Fix connector and encoder cleanup. drm/nouveau: Replace the iturbt_709 prop with the standard COLOR_ENCODING prop drm/pl111: Use max memory bandwidth for resolution drm/bridge: sii902x: Retry status read after DDI I2C drm/pl111: Handle the RealView variant separately drm/pl111: Make the default BPP a per-variant variable drm: simple_kms_helper: Fix .mode_valid() documentation bridge: Elaborate a bit on dumb VGA bridges in Kconfig drm/atomic: Add new reverse iterator over all plane state (V2) drm: Reject bad property flag combinations drm: Make property flags u32 drm/uapi: Deprecate DRM_MODE_PROP_PENDING drm: WARN when trying to add enum value > 63 to a bitmask property drm: WARN when trying add enum values to non-enum/bitmask properties drm: Reject replacing property enum values ...
2018-03-06drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problemJoe Moriarty1-0/+9
The Parfait (version 2.1.0) static code analysis tool found the following NULL pointer derefernce problem. - drivers/gpu/drm/drm_vblank.c Null pointer checks were added to return values from calls to drm_crtc_from_index(). There is a possibility, however minute, that crtc->index may not be found when trying to find the struct crtc from it's assigned index given in drm_crtc_init_with_planes(). 3 return checks for NULL where added with a call to WARN_ON(!crtc). Signed-off-by: Joe Moriarty <joe.moriarty@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180220191157.100960-2-joe.moriarty@oracle.com
2018-02-21drm/doc: Fix documentation for _vblank_restore().Dhinakaran Pandiyan1-8/+14
No code changes, fixes doc build warnings and polish some doc text. Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180221073908.4500-1-dhinakaran.pandiyan@intel.com
2018-02-15drm/vblank: Restoring vblank counts after device PM events.Dhinakaran Pandiyan1-0/+59
The HW frame counter can get reset if device enters a low power state after vblank interrupts were disabled. This messes up any following vblank count update as a negative diff (huge unsigned diff) is calculated from the HW frame counter change. We cannot ignore negative diffs altogther as there could be legitimate wrap arounds. So, allow drivers to update vblank->count with missed vblanks for the time interrupts were disabled. This is similar to _crtc_vblank_on() except that vblanks interrupts are not enabled at the end as this function is expected to be called from the driver _enable_vblank() vfunc. v2: drm_crtc_vblank_restore should take crtc as arg. (Chris) Add docs and sprinkle some asserts. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-9-dhinakaran.pandiyan@intel.com
2018-02-15drm/vblank: Do not update vblank count if interrupts are already disabled.Dhinakaran Pandiyan1-8/+10
Updating vblank counts requires register reads and these reads may not return meaningful values if the device was in a low power state after vblank interrupts were last disabled. So, update the count only if vblank interrupts are enabled. Secondly, this means the registers should be read before disabling vblank interrupts. v2: Don't check vblank->enabled outside it's lock (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-8-dhinakaran.pandiyan@intel.com
2018-02-15drm/vblank: Data type fixes for 64-bit vblank sequences.Dhinakaran Pandiyan1-4/+4
drm_vblank_count() has an u32 type returning what is a 64-bit vblank count. The effect of this is when drm_wait_vblank_ioctl() tries to widen the user space requested vblank sequence using this clipped 32-bit count(when the value is >= 2^32) as reference, the requested sequence remains a 32-bit value and gets queued like that. However, the code that checks if the requested sequence has passed compares this against the 64-bit vblank count. With drm_vblank_count() returning all bits of the vblank count, update drm_crtc_accurate_vblank_count() so that drm_crtc_arm_vblank_event() queues the correct sequence. Otherwise, this leads to prolonged waits for a vblank sequence when the current count is >=2^32. Finally, fix drm_wait_one_vblank() too. v2: Commit message fix (Keith) Squash commits (Rodrigo) Fixes: 570e86963a51 ("drm: Widen vblank count to 64-bits [v3]") Cc: Keith Packard <keithp@keithp.com> Cc: Michel Dänzer <michel@daenzer.net> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-1-dhinakaran.pandiyan@intel.com
2017-12-03Merge tag 'drm-misc-next-2017-11-30' of ↵Dave Airlie1-5/+7
git://anongit.freedesktop.org/drm/drm-misc into drm-next Cross-subsystem Changes: - device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71 panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu) Core Changes: The most important changes are: - Add drm_driver .last_close and .output_poll_changed helpers to reduce fbdev emulation footprint in drivers (Noralf) - Fix plane clipping in core and for vmwgfx (Ville) Then we have a bunch of of improvement for print and debug such as the addition of a framebuffer debugfs file. ELD connector, HDMI and improvements. And a bunch of misc improvements, clean ups and style changes and doc updates [airlied: drop eld bits from amdgpu_dm] Driver Changes: - sii8620: filter unsupported modes and add DVI mode support (Maciej Purski) - rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen) - virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu) - virtio: replace reference/unreference with get/put (Aastha Gupta) - vc4, gma500: Convert timers to use timer_setup() (Kees Cook) - vc4: Reject HDMI modes with too high of clocks (Eric) - vc4: Add support for more pixel formats (Dave Stevenson) - stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu) - stm: ltdc: add a 2nd endpoint (Philippe Cornu) - via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann) * tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits) drm/bridge: tc358767: add copyright lines MAINTAINERS: change maintainer for Rockchip drm drivers drm/vblank: Fix vblank timestamp debugs drm/via: use monotonic time for VIA_WAIT_IRQ dma-buf: Fix ifnullfree.cocci warnings drm/printer: Add drm_vprintf() drm/edid: Allow HDMI infoframe without VIC or S3D video/hdmi: Allow "empty" HDMI infoframes dma-buf/fence: Fix lock inversion within dma-fence-array drm/sti: Handle return value of platform_get_irq_byname drm/vc4: Add support for NV21 and NV61. drm/vc4: Use .pixel_order instead of custom .flip_cbcr drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state() drm/vmwgfx: Try to fix plane clipping drm/vmwgfx: Use drm_plane_helper_check_state() drm/vmwgfx: Remove bogus crtc coords vs fb size check gpu: gma500: remove unneeded DRIVER_LICENSE #define drm: don't link DP aux i2c adapter to the hardware device node ...
2017-11-29drm/vblank: Fix vblank timestamp debugsVille Syrjälä1-5/+7
We're currently calling ktime_to_timespec64() on stack garbage hence the debug output for vblank timestamps also contains garbage. Let's assing something to the ktime_t first before we go converting it to a timespec. While at it micro-optimize the ktime_to_timespec64() calls away when vblank debugging isn't enabled. Fixes: 67680d3c0464 ("drm: vblank: use ktime_t instead of timeval") Cc: Arnd Bergmann <arnd@arndb.de> Cc: Keith Packard <keithp@keithp.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113150210.11311-1-ville.syrjala@linux.intel.com Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-11-22treewide: setup_timer() -> timer_setup()Kees Cook1-6/+5
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-07drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debugVille Syrjälä1-2/+2
Since commit 632c6e4edef1 ("drm/vblank: Fix flip event vblank count") even drivers that don't implement accurate vblank timestamps will end up using drm_crtc_accurate_vblank_count(). That leads to a WARN every time drm_crtc_arm_vblank_event() gets called. The could be as often as every frame for each active crtc. Considering drm_crtc_accurate_vblank_count() is never any worse than the drm_vblank_count() we used previously, let's just skip the WARN unless DRM_UT_VBL is enabled. That way people won't be bothered by this unless they're debugging vblank code. And let's also change it to WARN_ONCE() so that even when you're debugging vblank code you won't get drowned by constant WARNs. Cc: stable@vger.kernel.org Cc: Daniel Vetter <daniel@ffwll.ch> Cc: "Szyprowski, Marek" <m.szyprowski@samsung.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Reported-by: Andrzej Hajda <a.hajda@samsung.com> Fixes: 632c6e4edef1 ("drm/vblank: Fix flip event vblank count") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023152540.15364-1-ville.syrjala@linux.intel.com Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-10-25drm: Check mode object lease status in all master ioctl paths [v4]Keith Packard1-2/+20
Attempts to modify un-leased objects are rejected with an error. Information returned about unleased objects is modified to make them appear unusable and/or disconnected. Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>: * With the change in the __drm_mode_object_find API to pass the file_priv along, we can now centralize most of the lease-based access checks in that function. * A few places skip that API and require in-line checks. Changes for v3 provided by Dave Airlie <airlied@redhat.com> * remove support for leasing encoders. * add support for leasing planes. Changes for v4 * Only call drm_lease_held if DRIVER_MODESET. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-10-23drm: Add CRTC_GET_SEQUENCE and CRTC_QUEUE_SEQUENCE ioctls [v3]Keith Packard1-0/+168
These provide crtc-id based functions instead of pipe-number, while also offering higher resolution time (ns) and wider frame count (64) as required by the Vulkan API. v2: * Check for DRIVER_MODESET in new crtc-based vblank ioctls Failing to check this will oops the driver. * Ensure vblank interupt is running in crtc_get_sequence ioctl The sequence and timing values are not correct while the interrupt is off, so make sure it's running before asking for them. * Short-circuit get_sequence if the counter is enabled and accurate Steal the idea from the code in wait_vblank to avoid the expense of drm_vblank_get/put * Return active state of crtc in crtc_get_sequence ioctl Might be useful for applications that aren't in charge of modesetting? * Use drm_crtc_vblank_get/put in new crtc-based vblank sequence ioctls Daniel Vetter prefers these over the old drm_vblank_put/get APIs. * Return s64 ns instead of u64 in new sequence event Suggested-by: Daniel Vetter <daniel@ffwll.ch> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> v3: * Removed FIRST_PIXEL_OUT_FLAG * Document that the timestamp in the query and event are that of the first pixel leaving the display engine for the display (using the same wording as the Vulkan spec). Suggested-by: Michel Dänzer <michel@daenzer.net> Acked-by: Dave Airlie <airlied@redhat.com> [airlied: left->leaves (Michel)] Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-10-21drm: Reorganize drm_pending_event to support future event types [v2]Keith Packard1-17/+24
Place drm_event_vblank in a new union that includes that and a bare drm_event structure. This will allow new members of that union to be added in the future without changing code related to the existing vbl event type. Assignments to the crtc_id field are now done when the event is allocated, rather than when delievered. This way, delivery doesn't need to have the crtc ID available. v2: * Remove 'dev' argument from create_vblank_event It wasn't being used anyways, and if we need it in the future, we can always get it from crtc->dev. * Check for MODESETTING before looking for crtc in queue_vblank_event UMS drivers will oops if we try to get a crtc, so make sure we're modesetting before we try to find a crtc_id to fill into the event. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com> (cherry picked from commit dc695b85fde88eca3ef3b03fcd82f15b6bc6e462)
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-29 06:03:15 +0300