| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
drm_crtc.h has no need for drm_edid.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_edid.h.
Quite a few placs do currently depend on drm_edid.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up i915 and msm some more
v3: Fix alphabetical ordering (Sam)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Rename struct dma_buf_map to struct iosys_map and corresponding APIs.
Over time dma-buf-map grew up to more functionality than the one used by
dma-buf: in fact it's just a shim layer to abstract system memory, that
can be accessed via regular load and store, from IO memory that needs to
be acessed via arch helpers.
The idea is to extend this API so it can fulfill other needs, internal
to a single driver. Example: in the i915 driver it's desired to share
the implementation for integrated graphics, which uses mostly system
memory, with discrete graphics, which may need to access IO memory.
The conversion was mostly done with the following semantic patch:
@r1@
@@
- struct dma_buf_map
+ struct iosys_map
@r2@
@@
(
- DMA_BUF_MAP_INIT_VADDR
+ IOSYS_MAP_INIT_VADDR
|
- dma_buf_map_set_vaddr
+ iosys_map_set_vaddr
|
- dma_buf_map_set_vaddr_iomem
+ iosys_map_set_vaddr_iomem
|
- dma_buf_map_is_equal
+ iosys_map_is_equal
|
- dma_buf_map_is_null
+ iosys_map_is_null
|
- dma_buf_map_is_set
+ iosys_map_is_set
|
- dma_buf_map_clear
+ iosys_map_clear
|
- dma_buf_map_memcpy_to
+ iosys_map_memcpy_to
|
- dma_buf_map_incr
+ iosys_map_incr
)
@@
@@
- #include <linux/dma-buf-map.h>
+ #include <linux/iosys-map.h>
Then some files had their includes adjusted and some comments were
update to remove mentions to dma-buf-map.
Since this is not specific to dma-buf anymore, move the documentation to
the "Bus-Independent Device Accesses" section.
v2:
- Squash patches
v3:
- Fix wrong removal of dma-buf.h from MAINTAINERS
- Move documentation from dma-buf.rst to device-io.rst
v4:
- Change documentation title and level
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
|
|
Move destination-buffer clipping from all format-helper conversion
functions into callers. Support destination-buffer pitch. Only
distinguish between system and I/O memory, but use same logic
everywhere.
Simply harmonize the interface and semantics of the existing code.
Not all conversion helpers support all combinations of parameters.
We have to add additional features when we need them.
v2:
* fix default destination pitch in drm_fb_xrgb8888_to_gray8()
(Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-5-tzimmermann@suse.de
|
|
Add destination-buffer pitch as argument to drm_fb_swab(). Done for
consistency with the rest of the interface.
v2:
* update documentation (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-4-tzimmermann@suse.de
|
|
Move destination-buffer clipping from all format-helper memcpy
function into callers. Support destination-buffer pitch. Only
distinguish between system and I/O memory, but use same logic
everywhere.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-3-tzimmermann@suse.de
|
|
Add support for the RGB888 pixel format.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929191201.34456-7-noralf@tronnes.org
|
|
Add support for the RGB332 pixel format.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929191201.34456-6-noralf@tronnes.org
|
|
Add support for 8-bit greyscale format.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929191201.34456-5-noralf@tronnes.org
|
|
We want to stop gup, which isn't the case if we use vmf_insert_page
and VM_MIXEDMAP, because that does not set pte_special.
The motivation here is to stop get_user_pages from working on buffer
object mmaps in general. Quoting some discussion with Thomas:
On Thu, Jul 22, 2021 at 08:22:43PM +0200, Thomas Zimmermann wrote:
> Am 13.07.21 um 22:51 schrieb Daniel Vetter:
> > We want to stop gup, which isn't the case if we use vmf_insert_page
>
> What is gup?
get_user_pages. It pins memory wherever it is, which badly wreaks at least
ttm and could also cause trouble with cma allocations. In both cases
becaue we can't move/reuse these pages anymore.
Now get_user_pages fails when the memory isn't considered "normal", like
with VM_PFNMAP and using vm_insert_pfn. For consistency across all dma-buf
I'm trying (together with Christian König) to roll this out everywhere,
for fewer surprises.
E.g. for 5.14 iirc we merged a patch to do the same for ttm, where it
closes an actual bug (ttm gets really badly confused when there's suddenly
pinned pages where it thought it can move them).
cma allcoations already use VM_PFNMAP (because that's what dma_mmap is
using underneath), as is anything that's using remap_pfn_range. Worst case
we have to revert this patch for shmem helpers if it breaks something, but
I hope that's not the case. On the ttm side we've also had some fallout
that we needed to paper over with clever tricks.
v2: With this shmem gem helpers now definitely need CONFIG_MMU (0day)
v3: add more depends on MMU. For usb drivers this is a bit awkward,
but really it's correct: To be able to provide a contig mapping of
buffers to userspace on !MMU platforms we'd need to use the cma
helpers for these drivers on those platforms. As-is this wont work.
Also not exactly sure why vm_insert_page doesn't go boom, because that
definitely wont fly in practice since the pages are non-contig to
begin with.
v4: Explain the entire motivation a lot more (Thomas)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812131412.2487363-2-daniel.vetter@ffwll.ch
|
|
Pass the data parameter to drm_gem_fb_vmap() to retrieve pointers
to the data. This address is different from the mapping addresses
for framebuffers with non-zero offsets. Replaces gud's internal
computation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-4-tzimmermann@suse.de
|
|
Add an additional argument to drm_gem_fb_vmap() to return each BO's
mapping adjusted by the respective offset. Update all callers.
The newly returned values point to the first byite of the data stored
in the framebuffer BOs. Drivers that access the BO data should use it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-2-tzimmermann@suse.de
|
|
Abstract the framebuffer details by mapping its BOs with a call
to drm_gem_fb_vmap(). Unmap with drm_gem_fb_vunmap().
The call to drm_gem_fb_vmap() ensures that all BOs are mapped
correctly. Gud still only supports single-plane formats.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-5-tzimmermann@suse.de
|
|
Replace dma_buf_begin_cpu_access() with drm_gem_fb_begin_cpu_access();
same for _end_cpu_access(). Remove some boiler-plate code. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210716140801.1215-5-tzimmermann@suse.de
|
|
Provide a way for userspace to choose synchronous flushing/pageflips.
This helps save CPU and power.
It is also useful for test scripts since userspace can know when a flush
has happended and wait before doing the next visual test.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20210703141321.35494-2-noralf@tronnes.org
|
|
Add VID/PID for the Raspberry Pi Pico implementation.
Source: https://github.com/notro/gud-pico
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20210703141321.35494-1-noralf@tronnes.org
|
|
There'a limit to how big a kmalloc buffer can be, and as memory gets
fragmented it becomes more difficult to get big buffers. The downside of
smaller buffers is that the driver has to split the transfer up which
hampers performance. Compression might also take a hit because of the
splitting.
Solve this by allocating the transfer buffer using vmalloc and create a
SG table to be passed on to the USB subsystem. vmalloc_32() is used to
avoid DMA bounce buffers on USB controllers that can only access 32-bit
addresses.
This also solves the problem that split transfers can give host side
tearing since flushing is decoupled from rendering.
usb_sg_wait() doesn't have timeout handling builtin, so it is wrapped in
a timer like 4 out of 6 users in the kernel have done.
v2:
- Use DIV_ROUND_UP (Linus)
- Add timeout note to the commit log (Linus)
- Expand note about upper buffer limit (Linus)
- Change var name s/timer/ctx/ in gud_usb_bulk_timeout()
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701170748.58009-2-noralf@tronnes.org
|
|
Free transfer and compression buffers on device removal instead of at
DRM device removal time. This ensures that the usual 2x8MB buffers are
released when the device is unplugged and not kept around should
userspace keep the DRM device fd open.
At least Ubuntu 20.04 doesn't release the DRM device on unplug.
The damage_lock mutex is not destroyed because it is used outside the
drm_dev_enter/exit block in gud_pipe_update(). AFAICT it's possible for
an open fbdev descriptor to trigger a commit after the USB device is gone.
v2: Don't destroy damage_lock
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701170748.58009-1-noralf@tronnes.org
|
|
Goes through all the drivers and deletes the default hook since it's
the default now.
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Emma Anholt <emma@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-14-daniel.vetter@ffwll.ch
|
|
Fix coccicheck warning:
drivers/gpu/drm/gud/gud_internal.h:89:2-3: Unneeded semicolon
drivers/gpu/drm/gud/gud_internal.h:107:2-3: Unneeded semicolon
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210402085523.76928-1-bernard@vivo.com
|
|
drivers/gpu/drm/gud/gud_connector.c:658:2-3: Unneeded semicolon
drivers/gpu/drm/gud/gud_connector.c:186:2-3: Unneeded semicolon
drivers/gpu/drm/gud/gud_drv.c:511:3-4: Unneeded semicolon
drivers/gpu/drm/gud/gud_pipe.c:127:4-5: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes: 40e1a70b4aed ("drm: Add GUD USB Display driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
[fix subject and squash 3 per file patches]
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322174434.58849-2-noralf@tronnes.org
|
|
drivers/gpu/drm/gud/gud_connector.c:710:37-43: ERROR: application of sizeof to pointer
sizeof when applied to a pointer typed expression gives the size of
the pointer
Generated by: scripts/coccinelle/misc/noderef.cocci
Fixes: 40e1a70b4aed ("drm: Add GUD USB Display driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
[fix subject]
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322174434.58849-1-noralf@tronnes.org
|
|
This adds a USB display driver with the intention that it can be
used with future USB interfaced low end displays/adapters. The Linux
gadget device driver will serve as the canonical device implementation.
The following DRM properties are supported:
- Plane rotation
- Connector TV properties
There is also support for backlight brightness exposed as a backlight
device.
Display modes can be made available to the host driver either as DRM
display modes or through EDID. If both are present, EDID is just passed
on to userspace.
Performance is preferred over color depth, so if the device supports
RGB565, DRM_CAP_DUMB_PREFERRED_DEPTH will return 16.
If the device transfer buffer can't fit an uncompressed framebuffer
update, the update is split up into parts that do fit.
Optimal user experience is achieved by providing damage reports either by
setting FB_DAMAGE_CLIPS on pageflips or calling DRM_IOCTL_MODE_DIRTYFB.
LZ4 compression is used if the device supports it.
The driver supports a one bit monochrome transfer format: R1. This is not
implemented in the gadget driver. It is added in preparation for future
monochrome e-ink displays.
The driver is MIT licensed to smooth the path for any BSD port of the
driver.
v2:
- Use devm_drm_dev_alloc() and drmm_mode_config_init()
- drm_fbdev_generic_setup: Use preferred_bpp=0, 16 was a copy paste error
- The drm_backlight_helper is dropped, copy in the code
- Support protocol version backwards compatibility for device
v3:
- Use donated Openmoko USB pid
- Use direct compression from framebuffer when pitch matches, not only on
full frames, so split updates can benefit
- Use __le16 in struct gud_drm_req_get_connector_status
- Set edid property when the device only provides edid
- Clear compression fields in struct gud_drm_req_set_buffer
- Fix protocol version negotiation
- Remove mode->vrefresh, it's calculated
v4:
- Drop the status req polling which was a workaround for something that
turned out to be a dwc2 udc driver problem
- Add a flag for the Linux gadget to require a status request on
SET operations. Other devices will only get status req on STALL errors
- Use protocol specific error codes (Peter)
- Add a flag for devices that want to receive the entire framebuffer on
each flush (Lubomir)
- Retry a failed framebuffer flush
- If mode has changed wait for worker and clear pending damage before
queuing up new damage, fb width/height might have changed
- Increase error counter on bulk transfer failures
- Use DRM_MODE_CONNECTOR_USB
- Handle R1 kmalloc error (Peter)
- Don't try and replicate the USB get descriptor request standard for the
display descriptor (Peter)
- Make max_buffer_size optional (Peter), drop the pow2 requirement since
it's not necessary anymore.
- Don't pre-alloc a control request buffer, it was only 4k
- Let gud.h describe the whole protocol explicitly and don't let DRM
leak into it (Peter)
- Drop display mode .hskew and .vscan from the protocol
- Shorten names: s/GUD_DRM_/GUD_/ s/gud_drm_/gud_/ (Peter)
- Fix gud_pipe_check() connector picking when switching connector
- Drop gud_drm_driver_gem_create_object() cached is default now
- Retrieve USB device from struct drm_device.dev instead of keeping a
pointer
- Honour fb->offsets[0]
- Fix mode fetching when connector status is forced
- Check EDID length reported by the device
- Use drm_do_get_edid() so userspace can overrride EDID
- Set epoch counter to signal connector status change
- gud_drm_driver can be const now
v5:
- GUD_DRM_FORMAT_R1: Use non-human ascii values (Daniel)
- Change name to: GUD USB Display (Thomas, Simon)
- Change one __u32 -> __le32 in protocol header
- Always log fb flush errors, unless the previous one failed
- Run backlight update in a worker to avoid upsetting lockdep (Daniel)
- Drop backlight_ops.get_brightness, there's no readback from the device
so it doesn't really add anything.
- Set dma mask, needed by dma-buf importers
v6:
- Use obj-y in Makefile (Peter)
- Fix missing le32_to_cpu() when using GUD_DISPLAY_MAGIC (Peter)
- Set initial brightness on backlight device
v7:
- LZ4_compress_default() can return zero, check for that
- Fix memory leak in gud_pipe_check() error path (Peter)
- Improve debug and error messages (Peter)
- Don't pass length in protocol structs (Peter)
- Pass USB interface to gud_usb_control_msg() et al. (Peter)
- Improve gud_connector_fill_properties() (Peter)
- Add GUD_PIXEL_FORMAT_RGB111 (Peter)
- Remove GUD_REQ_SET_VERSION (Peter)
- Fix DRM_IOCTL_MODE_OBJ_SETPROPERTY and the rotation property
- Fix dma-buf import (Thomas)
v8:
- Forgot to filter RGB111 from reaching userspace
- Handle a device that only returns unknown device properties (Peter)
- s/GUD_PIXEL_FORMAT_RGB111/GUD_PIXEL_FORMAT_XRGB1111/ (Peter)
- Fix R1 and XRGB1111 format conversion
- Add FIXME about Big Endian being broken (Peter, Ilia)
Cc: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: Peter Stuge <peter@stuge.se>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210313112545.37527-4-noralf@tronnes.org
|
