summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)AuthorFilesLines
2024-07-05drm/i915/gt: Fix potential UAF by revoke of fence registersJanusz Krzysztofik1-0/+1
commit 996c3412a06578e9d779a16b9e79ace18125ab50 upstream. CI has been sporadically reporting the following issue triggered by igt@i915_selftest@live@hangcheck on ADL-P and similar machines: <6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence ... <6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <3> [414.070354] Unable to pin Y-tiled fence; err:-4 <3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active)) ... <4>[ 609.603992] ------------[ cut here ]------------ <2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301! <4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1 <4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 <4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915] <4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915] ... <4>[ 609.604271] Call Trace: <4>[ 609.604273] <TASK> ... <4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915] <4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915] <4>[ 609.604977] force_unbind+0x24/0xa0 [i915] <4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915] <4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915] <4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915] <4>[ 609.605440] process_scheduled_works+0x351/0x690 ... In the past, there were similar failures reported by CI from other IGT tests, observed on other platforms. Before commit 63baf4f3d587 ("drm/i915/gt: Only wait for GPU activity before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for idleness of vma->active via fence_update(). That commit introduced vma->fence->active in order for the fence_update() to be able to wait selectively on that one instead of vma->active since only idleness of fence registers was needed. But then, another commit 0d86ee35097a ("drm/i915/gt: Make fence revocation unequivocal") replaced the call to fence_update() in i915_vma_revoke_fence() with only fence_write(), and also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front. No justification was provided on why we might then expect idleness of vma->fence->active without first waiting on it. The issue can be potentially caused by a race among revocation of fence registers on one side and sequential execution of signal callbacks invoked on completion of a request that was using them on the other, still processed in parallel to revocation of those fence registers. Fix it by waiting for idleness of vma->fence->active in i915_vma_revoke_fence(). Fixes: 0d86ee35097a ("drm/i915/gt: Make fence revocation unequivocal") Closes: https://gitlab.freedesktop.org/drm/intel/issues/10021 Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: stable@vger.kernel.org # v5.8+ Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240603195446.297690-2-janusz.krzysztofik@linux.intel.com (cherry picked from commit 24bb052d3dd499c5956abad5f7d8e4fd07da7fb1) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-27drm/i915/mso: using joiner is not possible with eDP MSOJani Nikula1-0/+4
commit 49cc17967be95d64606d5684416ee51eec35e84a upstream. It's not possible to use the joiner at the same time with eDP MSO. When a panel needs MSO, it's not optional, so MSO trumps joiner. v3: Only change intel_dp_has_joiner(), leave debugfs alone (Ville) Fixes: bc71194e8897 ("drm/i915/edp: enable eDP MSO during link training") Cc: <stable@vger.kernel.org> # v5.13+ Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1668 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240614142311.589089-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 8b5a92ca24eb96bb71e2a55e352687487d87687f) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21drm/i915: Fix audio component initializationImre Deak3-11/+24
commit 75800e2e4203ea83bbc9d4f63ad97ea582244a08 upstream. After registering the audio component in i915_audio_component_init() the audio driver may call i915_audio_component_get_power() via the component ops. This could program AUD_FREQ_CNTRL with an uninitialized value if the latter function is called before display.audio.freq_cntrl gets initialized. The get_power() function also does a modeset which in the above case happens too early before the initialization step and triggers the "Reject display access from task" error message added by the Fixes: commit below. Fix the above issue by registering the audio component only after the initialization step. Fixes: 87c1694533c9 ("drm/i915: save AUD_FREQ_CNTRL state at audio domain suspend") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10291 Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240521143022.3784539-1-imre.deak@intel.com (cherry picked from commit fdd0b80172758ce284f19fa8a26d90c61e4371d2) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21drm/i915/dpt: Make DPT object unshrinkableVidya Srinivas1-1/+3
commit 43e2b37e2ab660c3565d4cff27922bc70e79c3f1 upstream. In some scenarios, the DPT object gets shrunk but the actual framebuffer did not and thus its still there on the DPT's vm->bound_list. Then it tries to rewrite the PTEs via a stale CPU mapping. This causes panic. Cc: stable@vger.kernel.org Reported-by: Shawn Lee <shawn.c.lee@intel.com> Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt") Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> [vsyrjala: Add TODO comment] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240520165634.1162470-1-vidya.srinivas@intel.com (cherry picked from commit 51064d471c53dcc8eddd2333c3f1c1d9131ba36c) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21drm/i915/gt: Disarm breadcrumbs if engines are already idleChris Wilson1-8/+7
commit 70cb9188ffc75e643debf292fcddff36c9dbd4ae upstream. The breadcrumbs use a GT wakeref for guarding the interrupt, but are disarmed during release of the engine wakeref. This leaves a hole where we may attach a breadcrumb just as the engine is parking (after it has parked its breadcrumbs), execute the irq worker with some signalers still attached, but never be woken again. That issue manifests itself in CI with IGT runner timeouts while tests are waiting indefinitely for release of all GT wakerefs. <6> [209.151778] i915: Running live_engine_pm_selftests/live_engine_busy_stats <7> [209.231628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5 <7> [209.231816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [209.231944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [209.232056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [209.232166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [209.232270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [209.232368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4> [299.356116] [IGT] Inactivity timeout exceeded. Killing the current test with SIGQUIT. ... <6> [299.356526] sysrq: Show State ... <6> [299.373964] task:i915_selftest state:D stack:11784 pid:5578 tgid:5578 ppid:873 flags:0x00004002 <6> [299.373967] Call Trace: <6> [299.373968] <TASK> <6> [299.373970] __schedule+0x3bb/0xda0 <6> [299.373974] schedule+0x41/0x110 <6> [299.373976] intel_wakeref_wait_for_idle+0x82/0x100 [i915] <6> [299.374083] ? __pfx_var_wake_function+0x10/0x10 <6> [299.374087] live_engine_busy_stats+0x9b/0x500 [i915] <6> [299.374173] __i915_subtests+0xbe/0x240 [i915] <6> [299.374277] ? __pfx___intel_gt_live_setup+0x10/0x10 [i915] <6> [299.374369] ? __pfx___intel_gt_live_teardown+0x10/0x10 [i915] <6> [299.374456] intel_engine_live_selftests+0x1c/0x30 [i915] <6> [299.374547] __run_selftests+0xbb/0x190 [i915] <6> [299.374635] i915_live_selftests+0x4b/0x90 [i915] <6> [299.374717] i915_pci_probe+0x10d/0x210 [i915] At the end of the interrupt worker, if there are no more engines awake, disarm the breadcrumb and go to sleep. Fixes: 9d5612ca165a ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission") Closes: https://gitlab.freedesktop.org/drm/intel/issues/10026 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240423165505.465734-2-janusz.krzysztofik@linux.intel.com (cherry picked from commit fbad43eccae5cb14594195c20113369aabaa22b5) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16drm/i915/hwmon: Get rid of devmAshutosh Dixit1-14/+32
commit 5bc9de065b8bb9b8dd8799ecb4592d0403b54281 upstream. When both hwmon and hwmon drvdata (on which hwmon depends) are device managed resources, the expectation, on device unbind, is that hwmon will be released before drvdata. However, in i915 there are two separate code paths, which both release either drvdata or hwmon and either can be released before the other. These code paths (for device unbind) are as follows (see also the bug referenced below): Call Trace: release_nodes+0x11/0x70 devres_release_group+0xb2/0x110 component_unbind_all+0x8d/0xa0 component_del+0xa5/0x140 intel_pxp_tee_component_fini+0x29/0x40 [i915] intel_pxp_fini+0x33/0x80 [i915] i915_driver_remove+0x4c/0x120 [i915] i915_pci_remove+0x19/0x30 [i915] pci_device_remove+0x32/0xa0 device_release_driver_internal+0x19c/0x200 unbind_store+0x9c/0xb0 and Call Trace: release_nodes+0x11/0x70 devres_release_all+0x8a/0xc0 device_unbind_cleanup+0x9/0x70 device_release_driver_internal+0x1c1/0x200 unbind_store+0x9c/0xb0 This means that in i915, if use devm, we cannot gurantee that hwmon will always be released before drvdata. Which means that we have a uaf if hwmon sysfs is accessed when drvdata has been released but hwmon hasn't. The only way out of this seems to be do get rid of devm_ and release/free everything explicitly during device unbind. v2: Change commit message and other minor code changes v3: Cleanup from i915_hwmon_register on error (Armin Wolf) v4: Eliminate potential static analyzer warning (Rodrigo) Eliminate fetch_and_zero (Jani) v5: Restore previous logic for ddat_gt->hwmon_dev error return (Andi) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10366 Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417145646.793223-1-ashutosh.dixit@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-12drm/i915/gt: Fix CCS id's calculation for CCS mode settingAndi Shyti3-1/+15
[ Upstream commit ee01b6a386eaf9984b58a2476e8f531149679da9 ] The whole point of the previous fixes has been to change the CCS hardware configuration to generate only one stream available to the compute users. We did this by changing the info.engine_mask that is set during device probe, reset during the detection of the fused engines, and finally reset again when choosing the CCS mode. We can't use the engine_mask variable anymore, as with the current configuration, it imposes only one CCS no matter what the hardware configuration is. Before changing the engine_mask for the third time, save it and use it for calculating the CCS mode. After the previous changes, the user reported a performance drop to around 1/4. We have tested that the compute operations, with the current patch, have improved by the same factor. Fixes: 6db31251bb26 ("drm/i915/gt: Enable only one CCS for compute workload") Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Gnattu OC <gnattuoc@me.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Tested-by: Jian Ye <jian.ye@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Tested-by: Gnattu OC <gnattuoc@me.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240517090616.242529-1-andi.shyti@linux.intel.com (cherry picked from commit a09d2327a9ba8e3f5be238bc1b7ca2809255b464) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12drm/i915/guc: avoid FIELD_PREP warningArnd Bergmann1-3/+3
[ Upstream commit d4f36db62396b73bed383c0b6e48d36278cafa78 ] With gcc-7 and earlier, there are lots of warnings like In file included from <command-line>:0:0: In function '__guc_context_policy_add_priority.isra.66', inlined from '__guc_context_set_prio.isra.67' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3292:3, inlined from 'guc_context_set_prio' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3320:2: include/linux/compiler_types.h:399:38: error: call to '__compiletime_assert_631' declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ... drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:2422:3: note: in expansion of macro 'FIELD_PREP' FIELD_PREP(GUC_KLV_0_KEY, GUC_CONTEXT_POLICIES_KLV_ID_##id) | \ ^~~~~~~~~~ Make sure that GUC_KLV_0_KEY is an unsigned value to avoid the warning. Fixes: 77b6f79df66e ("drm/i915/guc: Update to GuC version 69.0.3") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430164809.482131-1-julia.filipchuk@intel.com (cherry picked from commit 364e039827ef628c650c21c1afe1c54d9c3296d9) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12kthread: add kthread_stop_putAndreas Gruenbacher1-3/+1
[ Upstream commit 6309727ef27162deabd5c095c11af24970fba5a2 ] Add a kthread_stop_put() helper that stops a thread and puts its task struct. Use it to replace the various instances of kthread_stop() followed by put_task_struct(). Remove the kthread_stop_put() macro in usbip that is similar but doesn't return the result of kthread_stop(). [agruenba@redhat.com: fix kerneldoc comment] Link: https://lkml.kernel.org/r/20230911111730.2565537-1-agruenba@redhat.com [akpm@linux-foundation.org: document kthread_stop_put()'s argument] Link: https://lkml.kernel.org/r/20230907234048.2499820-1-agruenba@redhat.com Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: bb9025f4432f ("dma-mapping: benchmark: fix up kthread-related error handling") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()Sean Young1-3/+3
[ Upstream commit c748a6d77c06a78651030e17da6beb278a1c9470 ] In order to introduce a pwm api which can be used from atomic context, we will need two functions for applying pwm changes: int pwm_apply_might_sleep(struct pwm *, struct pwm_state *); int pwm_apply_atomic(struct pwm *, struct pwm_state *); This commit just deals with renaming pwm_apply_state(), a following commit will introduce the pwm_apply_atomic() function. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Lee Jones <lee@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Stable-dep-of: 974afccd3794 ("leds: pwm: Disable PWM when going to suspend") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12i915: make inject_virtual_interrupt() voidChristian Brauner1-7/+6
[ Upstream commit 85884871921000b9bca2184077b1159771e50047 ] The single caller of inject_virtual_interrupt() ignores the return value anyway. This allows us to simplify eventfd_signal() in follow-up patches. Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-1-bd549b14ce0c@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org> Stable-dep-of: 82b951e6fbd3 ("vfio/pci: fix potential memory leak in vfio_intx_enable()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17drm/i915/bios: Fix parsing backlight BDB dataKarthikeyan Ramasubramanian2-20/+4
commit 43b26bdd2ee5cfca80939be910d5b23a50cd7f9d upstream. Starting BDB version 239, hdr_dpcd_refresh_timeout is introduced to backlight BDB data. Commit 700034566d68 ("drm/i915/bios: Define more BDB contents") updated the backlight BDB data accordingly. This broke the parsing of backlight BDB data in VBT for versions 236 - 238 (both inclusive) and hence the backlight controls are not responding on units with the concerned BDB version. backlight_control information has been present in backlight BDB data from at least BDB version 191 onwards, if not before. Hence this patch extracts the backlight_control information for BDB version 191 or newer. Tested on Chromebooks using Jasperlake SoC (reports bdb->version = 236). Tested on Chromebooks using Raptorlake SoC (reports bdb->version = 251). v2: removed checking the block size of the backlight BDB data [vsyrjala: this is completely safe thanks to commit e163cfb4c96d ("drm/i915/bios: Make copies of VBT data blocks")] Fixes: 700034566d68 ("drm/i915/bios: Define more BDB contents") Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240221180622.v2.1.I0690aa3e96a83a43b3fc33f50395d334b2981826@changeid Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit c286f6a973c66c0d993ecab9f7162c790e7064c8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-17drm/i915/gt: Automate CCS Mode setting during engine resetsAndi Shyti3-5/+7
commit 51c1b42a232f17743cd825be6790cb64735ff98f upstream. We missed setting the CCS mode during resume and engine resets. Create a workaround to be added in the engine's workaround list. This workaround sets the XEHP_CCS_MODE value at every reset. The issue can be reproduced by running: $ clpeak --kernel-latency Without resetting the CCS mode, we encounter a fence timeout: Fence expiration time out i915-0000:03:00.0:clpeak[2387]:2! Fixes: 6db31251bb26 ("drm/i915/gt: Enable only one CCS for compute workload") Reported-by: Gnattu OC <gnattuoc@me.com> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895 Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: <stable@vger.kernel.org> # v6.2+ Tested-by: Gnattu OC <gnattuoc@me.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by: Krzysztof Gibala <krzysztof.gibala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240426000723.229296-1-andi.shyti@linux.intel.com (cherry picked from commit 4cfca03f76413db115c3cc18f4370debb1b81b2b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-17drm/i915/audio: Fix audio time stamp programming for DPChaitanya Kumar Borah1-105/+8
commit c66b8356273c8d22498f88e4223af47a7bf8a23c upstream. Intel hardware is capable of programming the Maud/Naud SDPs on its own based on real-time clocks. While doing so, it takes care of any deviations from the theoretical values. Programming the registers explicitly with static values can interfere with this logic. Therefore, let the HW decide the Maud and Naud SDPs on it's own. Cc: stable@vger.kernel.org # v5.17 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8097 Co-developed-by: Kai Vehmanen <kai.vehmanen@intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430091825.733499-1-chaitanya.kumar.borah@intel.com (cherry picked from commit 8e056b50d92ae7f4d6895d1c97a69a2a953cf97b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27drm/i915/mst: Limit MST+DSC to TGL+Ville Syrjälä2-1/+2
[ Upstream commit 51bc63392e96ca45d7be98bc43c180b174ffca09 ] The MST code currently assumes that glk+ already supports MST+DSC, which is incorrect. We need to check for TGL+ actually. ICL does support SST+DSC, but supposedly it can't do MST+FEC which will also rule out MST+DSC. Note that a straight TGL+ check doesn't work here because DSC support can get fused out, so we do need to also check 'has_dsc'. Cc: stable@vger.kernel.org Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path") Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-6-ville.syrjala@linux.intel.com (cherry picked from commit c9c92f286dbdf872390ef3e74dbe5f0641e46f55) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915/vma: Fix UAF on destroy against retire raceJanusz Krzysztofik1-7/+35
commit 0e45882ca829b26b915162e8e86dbb1095768e9e upstream. Object debugging tools were sporadically reporting illegal attempts to free a still active i915 VMA object when parking a GT believed to be idle. [161.359441] ODEBUG: free active (active state 0) object: ffff88811643b958 object type: i915_active hint: __i915_vma_active+0x0/0x50 [i915] [161.360082] WARNING: CPU: 5 PID: 276 at lib/debugobjects.c:514 debug_print_object+0x80/0xb0 ... [161.360304] CPU: 5 PID: 276 Comm: kworker/5:2 Not tainted 6.5.0-rc1-CI_DRM_13375-g003f860e5577+ #1 [161.360314] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022 [161.360322] Workqueue: i915-unordered __intel_wakeref_put_work [i915] [161.360592] RIP: 0010:debug_print_object+0x80/0xb0 ... [161.361347] debug_object_free+0xeb/0x110 [161.361362] i915_active_fini+0x14/0x130 [i915] [161.361866] release_references+0xfe/0x1f0 [i915] [161.362543] i915_vma_parked+0x1db/0x380 [i915] [161.363129] __gt_park+0x121/0x230 [i915] [161.363515] ____intel_wakeref_put_last+0x1f/0x70 [i915] That has been tracked down to be happening when another thread is deactivating the VMA inside __active_retire() helper, after the VMA's active counter has been already decremented to 0, but before deactivation of the VMA's object is reported to the object debugging tool. We could prevent from that race by serializing i915_active_fini() with __active_retire() via ref->tree_lock, but that wouldn't stop the VMA from being used, e.g. from __i915_vma_retire() called at the end of __active_retire(), after that VMA has been already freed by a concurrent i915_vma_destroy() on return from the i915_active_fini(). Then, we should rather fix the issue at the VMA level, not in i915_active. Since __i915_vma_parked() is called from __gt_park() on last put of the GT's wakeref, the issue could be addressed by holding the GT wakeref long enough for __active_retire() to complete before that wakeref is released and the GT parked. I believe the issue was introduced by commit d93939730347 ("drm/i915: Remove the vma refcount") which moved a call to i915_active_fini() from a dropped i915_vma_release(), called on last put of the removed VMA kref, to i915_vma_parked() processing path called on last put of a GT wakeref. However, its visibility to the object debugging tool was suppressed by a bug in i915_active that was fixed two weeks later with commit e92eb246feb9 ("drm/i915/active: Fix missing debug object activation"). A VMA associated with a request doesn't acquire a GT wakeref by itself. Instead, it depends on a wakeref held directly by the request's active intel_context for a GT associated with its VM, and indirectly on that intel_context's engine wakeref if the engine belongs to the same GT as the VMA's VM. Those wakerefs are released asynchronously to VMA deactivation. Fix the issue by getting a wakeref for the VMA's GT when activating it, and putting that wakeref only after the VMA is deactivated. However, exclude global GTT from that processing path, otherwise the GPU never goes idle. Since __i915_vma_retire() may be called from atomic contexts, use async variant of wakeref put. Also, to avoid circular locking dependency, take care of acquiring the wakeref before VM mutex when both are needed. v7: Add inline comments with justifications for: - using untracked variants of intel_gt_pm_get/put() (Nirmoy), - using async variant of _put(), - not getting the wakeref in case of a global GTT, - always getting the first wakeref outside vm->mutex. v6: Since __i915_vma_active/retire() callbacks are not serialized, storing a wakeref tracking handle inside struct i915_vma is not safe, and there is no other good place for that. Use untracked variants of intel_gt_pm_get/put_async(). v5: Replace "tile" with "GT" across commit description (Rodrigo), - avoid mentioning multi-GT case in commit description (Rodrigo), - explain why we need to take a temporary wakeref unconditionally inside i915_vma_pin_ww() (Rodrigo). v4: Refresh on top of commit 5e4e06e4087e ("drm/i915: Track gt pm wakerefs") (Andi), - for more easy backporting, split out removal of former insufficient workarounds and move them to separate patches (Nirmoy). - clean up commit message and description a bit. v3: Identify root cause more precisely, and a commit to blame, - identify and drop former workarounds, - update commit message and description. v2: Get the wakeref before VM mutex to avoid circular locking dependency, - drop questionable Fixes: tag. Fixes: d93939730347 ("drm/i915: Remove the vma refcount") Closes: https://gitlab.freedesktop.org/drm/intel/issues/8875 Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org # v5.19+ Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240305143747.335367-6-janusz.krzysztofik@linux.intel.com (cherry picked from commit f3c71b2ded5c4367144a810ef25f998fd1d6c381) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27drm/i915: Disable live M/N updates when using bigjoinerVille Syrjälä1-1/+5
[ Upstream commit 4a36e46df7aa781c756f09727d37dc2783f1ee75 ] All joined pipes share the same transcoder/timing generator. Currently we just do the commits per-pipe, which doesn't really work if we need to change the timings at the same time. For now just disable live M/N updates when bigjoiner is needed. Cc: stable@vger.kernel.org Tested-by: Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-5-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit ef79820db723a2a7c229a7251c12859e7e25a247) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915: Adjust seamless_m_n flag behaviourVille Syrjälä5-12/+17
[ Upstream commit 825edc8bc72f3266534a04e9a4447b12332fac82 ] Make the seamless_m_n flag more like the update_pipe fastset flag, ie. the flag will only be set if we need to do the seamless M/N update, and in all other cases the flag is cleared. Also rename the flag to update_m_n to make it more clear it's similar to update_pipe. I believe special casing seamless_m_n like this makes sense as it also affects eg. vblank evasion. We can potentially avoid some vblank evasion tricks, simplify some checks, and hopefully will help with the VRR vs. M/N mess. Cc: Manasi Navare <navaremanasi@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-6-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915: Enable VRR later during fastsetsVille Syrjälä2-20/+36
[ Upstream commit 691dec86acc3afb469f09e9a4a00508b458bdb0c ] In order to reconcile seamless M/N updates with VRR we'll need to defer the fastset VRR enable to happen after the seamless M/N update (which happens during the vblank evade critical section). So just push the VRR enable to be the last thing during the update. This will also affect the vblank evasion as the transcoder will now still be running with the old VRR state during the vblank evasion. So just grab the timings always from the old crtc state during any non-modeset commit, and also grab the current state of VRR from the active timings (as we disable VRR before vblank evasion during fastsets). This also fixes vblank evasion for seamless M/N updates as we now properly account for the fact that the M/N update happens after vblank evasion. Cc: Manasi Navare <navaremanasi@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-5-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915: Extract intel_crtc_vblank_evade_scanlines()Ville Syrjälä1-22/+31
[ Upstream commit f4b0cece716c95e16d973a774d5a5c5cc8cb335d ] Pull the vblank evasion scanline calculations into their own helper to declutter intel_pipe_update_start() a bit. Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-4-ville.syrjala@linux.intel.com Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915: Change intel_pipe_update_{start,end}() calling conventionVille Syrjälä3-10/+18
[ Upstream commit 09f390d4e2f38f8433431f4da31ca0a17a5c7853 ] We'll need to also look at the old crtc state in intel_pipe_update_start() so change the calling convention to just plumb in the full atomic state instead. Cc: Manasi Navare <navaremanasi@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-3-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915/cdclk: Fix voltage_level programming edge caseVille Syrjälä1-10/+27
[ Upstream commit 6154cc9177ccea00c89ce0bf93352e474b819ff2 ] Currently we only consider the relationship of the old and new CDCLK frequencies when determining whether to do the repgramming from intel_set_cdclk_pre_plane_update() or intel_set_cdclk_post_plane_update(). It is technically possible to have a situation where the CDCLK frequency is decreasing, but the voltage_level is increasing due a DDI port. In this case we should bump the voltage level already in intel_set_cdclk_pre_plane_update() (so that the voltage_level will have been increased by the time the port gets enabled), while leaving the CDCLK frequency unchanged (as active planes/etc. may still depend on it). We can then reduce the CDCLK frequency to its final value from intel_set_cdclk_post_plane_update(). In order to handle that correctly we shall construct a suitable amalgam of the old and new cdclk states in intel_set_cdclk_pre_plane_update(). And we can simply call intel_set_cdclk() unconditionally in both places as it will not do anything if nothing actually changes vs. the current hw state. v2: Handle cdclk_state->disable_pipes v3: Only synchronize the cd2x update against the pipe's vblank when the cdclk frequency is changing during the current commit phase (Gustavo) Cc: stable@vger.kernel.org Cc: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-3-ville.syrjala@linux.intel.com (cherry picked from commit 34d127e2bdef73a923aa0dcd95cbc3257ad5af52) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915/mst: Reject FEC+MST on ICLVille Syrjälä1-1/+2
[ Upstream commit 99f855082f228cdcecd6ab768d3b8b505e0eb028 ] ICL supposedly doesn't support FEC on MST. Reject it. Cc: stable@vger.kernel.org Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path") Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-7-ville.syrjala@linux.intel.com (cherry picked from commit b648ce2a28ba83c4fa67c61fcc5983e15e9d4afb) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915: Fix FEC pipe A vs. DDI A mixupVille Syrjälä1-2/+2
[ Upstream commit 126f94e87e7960ef7ae58180e39c19cc9dcbbf7f ] On pre-TGL FEC is a port level feature, not a transcoder level feature, and it's DDI A which doesn't have it, not trancoder A. Check for the correct thing when determining whether FEC is supported or not. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-5-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Stable-dep-of: 99f855082f22 ("drm/i915/mst: Reject FEC+MST on ICL") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17drm/i915: Disable port sync when bigjoiner is usedVille Syrjälä1-0/+5
commit 0653d501409eeb9f1deb7e4c12e4d0d2c9f1cba1 upstream. The current modeset sequence can't handle port sync and bigjoiner at the same time. Refuse port sync when bigjoiner is needed, at least until we fix the modeset sequence. v2: Add a FIXME (Vandite) Cc: stable@vger.kernel.org Tested-by: Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-4-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit b37e1347b991459c38c56ec2476087854a4f720b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17drm/i915/cdclk: Fix CDCLK programming order when pipes are activeVille Syrjälä2-2/+8
commit 7b1f6b5aaec0f849e19c3e99d4eea75876853cdd upstream. Currently we always reprogram CDCLK from the intel_set_cdclk_pre_plane_update() when using squash/crawl. The code only works correctly for the cd2x update or full modeset cases, and it was simply never updated to deal with squash/crawl. If the CDCLK frequency is increasing we must reprogram it before we do anything else that might depend on the new higher frequency, and conversely we must not decrease the frequency until everything that might still depend on the old higher frequency has been dealt with. Since cdclk_state->pipe is only relevant when doing a cd2x update we can't use it to determine the correct sequence during squash/crawl. To that end introduce cdclk_state->disable_pipes which simply indicates that we must perform the update while the pipes are disable (ie. during intel_set_cdclk_pre_plane_update()). Otherwise we use the same old vs. new CDCLK frequency comparsiong as for cd2x updates. The only remaining problem case is when the voltage_level needs to increase due to a DDI port, but the CDCLK frequency is decreasing (and not all pipes are being disabled). The current approach will not bump the voltage level up until after the port has already been enabled, which is too late. But we'll take care of that case separately. v2: Don't break the "must disable pipes case" v3: Keep the on stack 'pipe' for future use Cc: stable@vger.kernel.org Fixes: d62686ba3b54 ("drm/i915/adl_p: CDCLK crawl support for ADL") Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-2-ville.syrjala@linux.intel.com (cherry picked from commit 3aecee90ac12a351905f12dda7643d5b0676d6ca) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17drm/i915/vrr: Disable VRR when using bigjoinerVille Syrjälä1-0/+7
commit dcd8992e47f13afb5c11a61e8d9c141c35e23751 upstream. All joined pipes share the same transcoder/timing generator. Currently we just do the commits per-pipe, which doesn't really work if we need to change switch between non-VRR and VRR timings generators on the fly, or even when sending the push to the transcoder. For now just disable VRR when bigjoiner is needed. Cc: stable@vger.kernel.org Tested-by: Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-6-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit f9d5e51db65652dbd8a2102fd7619440e3599fd2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-10drm/i915/gt: Enable only one CCS for compute workloadAndi Shyti5-0/+65
commit 6db31251bb265813994bfb104eb4b4d0f44d64fb upstream. Enable only one CCS engine by default with all the compute sices allocated to it. While generating the list of UABI engines to be exposed to the user, exclude any additional CCS engines beyond the first instance. This change can be tested with igt i915_query. Fixes: d2eae8e98d59 ("drm/i915/dg2: Drop force_probe requirement") Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: <stable@vger.kernel.org> # v6.2+ Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Michal Mrozek <michal.mrozek@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-4-andi.shyti@linux.intel.com (cherry picked from commit 2bebae0112b117de7e8a7289277a4bd2403b9e17) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-10drm/i915/gt: Do not generate the command streamer for all the CCSAndi Shyti1-0/+17
commit ea315f98e5d6d3191b74beb0c3e5fc16081d517c upstream. We want a fixed load CCS balancing consisting in all slices sharing one single user engine. For this reason do not create the intel_engine_cs structure with its dedicated command streamer for CCS slices beyond the first. Fixes: d2eae8e98d59 ("drm/i915/dg2: Drop force_probe requirement") Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: <stable@vger.kernel.org> # v6.2+ Acked-by: Michal Mrozek <michal.mrozek@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-3-andi.shyti@linux.intel.com (cherry picked from commit c7a5aa4e57f88470313a8277eb299b221b86e3b1) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-10drm/i915/gt: Disable HW load balancing for CCSAndi Shyti2-2/+22
commit bc9a1ec01289e6e7259dc5030b413a9c6654a99a upstream. The hardware should not dynamically balance the load between CCS engines. Wa_14019159160 recommends disabling it across all platforms. Fixes: d2eae8e98d59 ("drm/i915/dg2: Drop force_probe requirement") Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: <stable@vger.kernel.org> # v6.2+ Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Michal Mrozek <michal.mrozek@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-2-andi.shyti@linux.intel.com (cherry picked from commit f5d2904cf814f20b79e3e4c1b24a4ccc2411b7e0) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-10drm/i915/mtl: Update workaround 14018575942Tejas Upadhyay1-0/+1
[ Upstream commit 186bce682772e7346bf7ced5325b5f4ff050ccfb ] Applying WA 14018575942 only on Compute engine has impact on some apps like chrome. Updating this WA to apply on Render engine as well as it is helping with performance on Chrome. Note: There is no concern from media team thus not applying WA on media engines. We will revisit if any issues reported from media team. V2(Matt): - Use correct WA number Fixes: 668f37e1ee11 ("drm/i915/mtl: Update workaround 14018778641") Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240228103738.2018458-1-tejas.upadhyay@intel.com (cherry picked from commit 71271280175aa0ed6673e40cce7c01296bcd05f6) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10drm/i915/xelpg: Extend some workarounds/tuning to gfx version 12.74Matt Roper3-12/+18
[ Upstream commit c44d4ef47fdad0a33966de89f9064e19736bb52f ] Some of our existing Xe_LPG workarounds and tuning are also applicable to the version 12.74 variant. Extend the condition bounds accordingly. Also fix the comment on Wa_14018575942 while we're at it. v2: Extend some more workarounds (Harish) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240108122738.14399-4-haridhar.kalvala@intel.com Stable-dep-of: 186bce682772 ("drm/i915/mtl: Update workaround 14018575942") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10drm/i915/mtl: Update workaround 14016712196Tejas Upadhyay1-4/+3
[ Upstream commit 7467e1da906468bcbd311023b30708193103ecf9 ] Now this workaround is permanent workaround on MTL and DG2, earlier we used to apply on MTL A0 step only. VLK-45480 Fixes: d922b80b1010 ("drm/i915/gt: Add workaround 14016712196") Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230828063450.2642748-1-tejas.upadhyay@intel.com Stable-dep-of: 186bce682772 ("drm/i915/mtl: Update workaround 14018575942") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10drm/i915: Replace several IS_METEORLAKE with proper IP version checksMatt Roper8-14/+13
[ Upstream commit 14128d64090fa88445376cb8ccf91c50c08bd410 ] Many of the IS_METEORLAKE conditions throughout the driver are supposed to be checks for Xe_LPG and/or Xe_LPM+ IP, not for the MTL platform specifically. Update those checks to ensure that the code will still operate properly if/when these IP versions show up on future platforms. v2: - Update two more conditions (one for pg_enable, one for MTL HuC compatibility). v3: - Don't change GuC/HuC compatibility check, which sounds like it truly is specific to the MTL platform. (Gustavo) - Drop a non-lineage workaround number for the OA timestamp frequency workaround. (Gustavo) Cc: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-20-matthew.d.roper@intel.com Stable-dep-of: 186bce682772 ("drm/i915/mtl: Update workaround 14018575942") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10drm/i915: Eliminate IS_MTL_GRAPHICS_STEPMatt Roper10-43/+62
[ Upstream commit 5a213086a025349361b5cf75c8fd4591d96a7a99 ] Several workarounds are guarded by IS_MTL_GRAPHICS_STEP. However none of these workarounds are actually tied to MTL as a platform; they only relate to the Xe_LPG graphics IP, regardless of what platform it appears in. At the moment MTL is the only platform that uses Xe_LPG with IP versions 12.70 and 12.71, but we can't count on this being true in the future. Switch these to use a new IS_GFX_GT_IP_STEP() macro instead that is purely based on IP version. IS_GFX_GT_IP_STEP() is also GT-based rather than device-based, which will help prevent mistakes where we accidentally try to apply Xe_LPG graphics workarounds to the Xe_LPM+ media GT and vice-versa. v2: - Switch to a more generic and shorter IS_GT_IP_STEP macro that can be used for both graphics and media IP (and any other kind of GTs that show up in the future). v3: - Switch back to long-form IS_GFX_GT_IP_STEP macro. (Jani) - Move macro to intel_gt.h. (Andi) v4: - Build IS_GFX_GT_IP_STEP on top of IS_GFX_GT_IP_RANGE and IS_GRAPHICS_STEP building blocks and name the parameters from/until rather than begin/fixed. (Jani) - Fix usage examples in comment. v5: - Tweak comment on macro. (Gustavo) Cc: Gustavo Sousa <gustavo.sousa@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-15-matthew.d.roper@intel.com Stable-dep-of: 186bce682772 ("drm/i915/mtl: Update workaround 14018575942") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10drm/i915/xelpg: Call Xe_LPG workaround functions based on IP versionMatt Roper2-18/+31
[ Upstream commit f7696ded7c9e358670dae1801660f442f059c7db ] Although some of our Xe_LPG workarounds were already being applied based on IP version correctly, others were matching on MTL as a base platform, which is incorrect. Although MTL is the only platform right now that uses Xe_LPG IP, this may not always be the case. If a future platform re-uses this graphics IP, the same workarounds should be applied, even if it isn't a "MTL" platform. We were also incorrectly applying Xe_LPG workarounds/tuning to the Xe_LPM+ media IP in one or two places; we should make sure that we don't try to apply graphics workarounds to the media GT and vice versa where they don't belong. A new helper macro IS_GT_IP_RANGE() is added to help ensure this is handled properly -- it checks that the GT matches the IP type being tested as well as the IP version falling in the proper range. Note that many of the stepping-based workarounds are still incorrectly checking for a MTL base platform; that will be remedied in a later patch. v2: - Rework macro into a slightly more generic IS_GT_IP_RANGE() that can be used for either GFX or MEDIA checks. v3: - Switch back to separate macros for gfx and media. (Jani) - Move macro to intel_gt.h. (Andi) Cc: Gustavo Sousa <gustavo.sousa@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-14-matthew.d.roper@intel.com Stable-dep-of: 186bce682772 ("drm/i915/mtl: Update workaround 14018575942") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10drm/i915: Consolidate condition for Wa_22011802037Matt Roper6-12/+24
[ Upstream commit 28c46feec7f8760683ef08f12746630a3598173e ] The workaround bounds for Wa_22011802037 are somewhat complex and are replicated in several places throughout the code. Pull the condition out to a helper function to prevent mistakes if this condition needs to change again in the future. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-12-matthew.d.roper@intel.com Stable-dep-of: 186bce682772 ("drm/i915/mtl: Update workaround 14018575942") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10drm/i915: Tidy workaround definitionsMatt Roper1-54/+46
[ Upstream commit f1c805716516f9e648e13f0108cea8096e0c7023 ] Removal of the DG2 pre-production workarounds has left duplicate condition blocks in a couple places, as well as some inconsistent platform ordering. Reshuffle and consolidate some of the workarounds to reduce the number of condition blocks and to more consistently follow the "newest platform first" convention. Code movement only; no functional change. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230816214201.534095-11-matthew.d.roper@intel.com Stable-dep-of: 186bce682772 ("drm/i915/mtl: Update workaround 14018575942") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10drm/i915/dg2: Drop pre-production GT workaroundsMatt Roper6-279/+21
[ Upstream commit eaeb4b3614529bfa8a7edfdd7ecf6977b27f18b2 ] DG2 first production steppings were C0 (for DG2-G10), B1 (for DG2-G11), and A1 (for DG2-G12). Several workarounds that apply onto to pre-production hardware can be dropped. Furthermore, several workarounds that apply to all production steppings can have their conditions simplified to no longer check the GT stepping. v2: - Keep Wa_16011777198 in place for now; it will be removed separately in a follow-up patch to keep review easier. Bspec: 44477 Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230816214201.534095-10-matthew.d.roper@intel.com Stable-dep-of: 186bce682772 ("drm/i915/mtl: Update workaround 14018575942") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10drm/i915: Pre-populate the cursor physical dma addressVille Syrjälä3-3/+12
[ Upstream commit 582dc04b0658ef3b90aeb49cbdd9747c2f1eccc3 ] Calling i915_gem_object_get_dma_address() from the vblank evade critical section triggers might_sleep(). While we know that we've already pinned the framebuffer and thus i915_gem_object_get_dma_address() will in fact not sleep in this case, it seems reasonable to keep the unconditional might_sleep() for maximum coverage. So let's instead pre-populate the dma address during fb pinning, which all happens before we enter the vblank evade critical section. We can use u32 for the dma address as this class of hardware doesn't support >32bit addresses. Cc: stable@vger.kernel.org Fixes: 0225a90981c8 ("drm/i915: Make cursor plane registers unlocked") Reported-by: Borislav Petkov <bp@alien8.de> Closes: https://lore.kernel.org/intel-gfx/20240227100342.GAZd2zfmYcPS_SndtO@fat_crate.local/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240325175738.3440-1-ville.syrjala@linux.intel.com Tested-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> (cherry picked from commit c1289a5c3594cf04caa94ebf0edeb50c62009f1f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10drm/i915/display: Use i915_gem_object_get_dma_address to get dma addressMaarten Lankhorst1-2/+4
[ Upstream commit 7054b551de18e9875fbdf8d4f3baade428353545 ] Works better for xe like that. obj is no longer const. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204134946.16219-1-maarten.lankhorst@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Stable-dep-of: 582dc04b0658 ("drm/i915: Pre-populate the cursor physical dma address") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03drm/i915/gt: Reset queue_priority_hint on parkingChris Wilson2-3/+3
commit 4a3859ea5240365d21f6053ee219bb240d520895 upstream. Originally, with strict in order execution, we could complete execution only when the queue was empty. Preempt-to-busy allows replacement of an active request that may complete before the preemption is processed by HW. If that happens, the request is retired from the queue, but the queue_priority_hint remains set, preventing direct submission until after the next CS interrupt is processed. This preempt-to-busy race can be triggered by the heartbeat, which will also act as the power-management barrier and upon completion allow us to idle the HW. We may process the completion of the heartbeat, and begin parking the engine before the CS event that restores the queue_priority_hint, causing us to fail the assertion that it is MIN. <3>[ 166.210729] __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1)) <0>[ 166.210781] Dumping ftrace buffer: <0>[ 166.210795] --------------------------------- ... <0>[ 167.302811] drm_fdin-1097 2..s1. 165741070us : trace_ports: 0000:00:02.0 rcs0: promote { ccid:20 1217:2 prio 0 } <0>[ 167.302861] drm_fdin-1097 2d.s2. 165741072us : execlists_submission_tasklet: 0000:00:02.0 rcs0: preempting last=1217:2, prio=0, hint=2147483646 <0>[ 167.302928] drm_fdin-1097 2d.s2. 165741072us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 1217:2, current 0 <0>[ 167.302992] drm_fdin-1097 2d.s2. 165741073us : __i915_request_submit: 0000:00:02.0 rcs0: fence 3:4660, current 4659 <0>[ 167.303044] drm_fdin-1097 2d.s1. 165741076us : execlists_submission_tasklet: 0000:00:02.0 rcs0: context:3 schedule-in, ccid:40 <0>[ 167.303095] drm_fdin-1097 2d.s1. 165741077us : trace_ports: 0000:00:02.0 rcs0: submit { ccid:40 3:4660* prio 2147483646 } <0>[ 167.303159] kworker/-89 11..... 165741139us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence c90:2, current 2 <0>[ 167.303208] kworker/-89 11..... 165741148us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:c90 unpin <0>[ 167.303272] kworker/-89 11..... 165741159us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 1217:2, current 2 <0>[ 167.303321] kworker/-89 11..... 165741166us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:1217 unpin <0>[ 167.303384] kworker/-89 11..... 165741170us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 3:4660, current 4660 <0>[ 167.303434] kworker/-89 11d..1. 165741172us : __intel_context_retire: 0000:00:02.0 rcs0: context:1216 retire runtime: { total:56028ns, avg:56028ns } <0>[ 167.303484] kworker/-89 11..... 165741198us : __engine_park: 0000:00:02.0 rcs0: parked <0>[ 167.303534] <idle>-0 5d.H3. 165741207us : execlists_irq_handler: 0000:00:02.0 rcs0: semaphore yield: 00000040 <0>[ 167.303583] kworker/-89 11..... 165741397us : __intel_context_retire: 0000:00:02.0 rcs0: context:1217 retire runtime: { total:325575ns, avg:0ns } <0>[ 167.303756] kworker/-89 11..... 165741777us : __intel_context_retire: 0000:00:02.0 rcs0: context:c90 retire runtime: { total:0ns, avg:0ns } <0>[ 167.303806] kworker/-89 11..... 165742017us : __engine_park: __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1)) <0>[ 167.303811] --------------------------------- <4>[ 167.304722] ------------[ cut here ]------------ <2>[ 167.304725] kernel BUG at drivers/gpu/drm/i915/gt/intel_engine_pm.c:283! <4>[ 167.304731] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 167.304734] CPU: 11 PID: 89 Comm: kworker/11:1 Tainted: G W 6.8.0-rc2-CI_DRM_14193-gc655e0fd2804+ #1 <4>[ 167.304736] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022 <4>[ 167.304738] Workqueue: i915-unordered retire_work_handler [i915] <4>[ 167.304839] RIP: 0010:__engine_park+0x3fd/0x680 [i915] <4>[ 167.304937] Code: 00 48 c7 c2 b0 e5 86 a0 48 8d 3d 00 00 00 00 e8 79 48 d4 e0 bf 01 00 00 00 e8 ef 0a d4 e0 31 f6 bf 09 00 00 00 e8 03 49 c0 e0 <0f> 0b 0f 0b be 01 00 00 00 e8 f5 61 fd ff 31 c0 e9 34 fd ff ff 48 <4>[ 167.304940] RSP: 0018:ffffc9000059fce0 EFLAGS: 00010246 <4>[ 167.304942] RAX: 0000000000000200 RBX: 0000000000000000 RCX: 0000000000000006 <4>[ 167.304944] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000009 <4>[ 167.304946] RBP: ffff8881330ca1b0 R08: 0000000000000001 R09: 0000000000000001 <4>[ 167.304947] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881330ca000 <4>[ 167.304948] R13: ffff888110f02aa0 R14: ffff88812d1d0205 R15: ffff88811277d4f0 <4>[ 167.304950] FS: 0000000000000000(0000) GS:ffff88844f780000(0000) knlGS:0000000000000000 <4>[ 167.304952] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 167.304953] CR2: 00007fc362200c40 CR3: 000000013306e003 CR4: 0000000000770ef0 <4>[ 167.304955] PKRU: 55555554 <4>[ 167.304957] Call Trace: <4>[ 167.304958] <TASK> <4>[ 167.305573] ____intel_wakeref_put_last+0x1d/0x80 [i915] <4>[ 167.305685] i915_request_retire.part.0+0x34f/0x600 [i915] <4>[ 167.305800] retire_requests+0x51/0x80 [i915] <4>[ 167.305892] intel_gt_retire_requests_timeout+0x27f/0x700 [i915] <4>[ 167.305985] process_scheduled_works+0x2db/0x530 <4>[ 167.305990] worker_thread+0x18c/0x350 <4>[ 167.305993] kthread+0xfe/0x130 <4>[ 167.305997] ret_from_fork+0x2c/0x50 <4>[ 167.306001] ret_from_fork_asm+0x1b/0x30 <4>[ 167.306004] </TASK> It is necessary for the queue_priority_hint to be lower than the next request submission upon waking up, as we rely on the hint to decide when to kick the tasklet to submit that first request. Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy") Closes: https://gitlab.freedesktop.org/drm/intel/issues/10154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240318135906.716055-2-janusz.krzysztofik@linux.intel.com (cherry picked from commit 98850e96cf811dc2d0a7d0af491caff9f5d49c1e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03drm/i915: Do not match JSL in ehl_combo_pll_div_frac_wa_needed()Jonathon Hall1-1/+1
commit e41d769f1a7a1dc533c35ef7b366be3dbf432a1c upstream. Since commit 0c65dc062611 ("drm/i915/jsl: s/JSL/JASPERLAKE for platform/subplatform defines"), boot freezes on a Jasper Lake tablet (Librem 11), usually with graphical corruption on the eDP display, but sometimes just a black screen. This commit was included in 6.6 and later. That commit was intended to refactor EHL and JSL macros, but the change to ehl_combo_pll_div_frac_wa_needed() started matching JSL incorrectly when it was only intended to match EHL. It replaced: return ((IS_PLATFORM(i915, INTEL_ELKHARTLAKE) && IS_JSL_EHL_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) || with: return (((IS_ELKHARTLAKE(i915) || IS_JASPERLAKE(i915)) && IS_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) || Remove IS_JASPERLAKE() to fix the regression. Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm> Cc: stable@vger.kernel.org Fixes: 0c65dc062611 ("drm/i915/jsl: s/JSL/JASPERLAKE for platform/subplatform defines") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240313135424.3731410-1-jonathon.hall@puri.sm Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 1ef48859317b2a77672dea8682df133abf9c44ed) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03drm/i915/dsi: Go back to the previous INIT_OTP/DISPLAY_ON order, mostlyVille Syrjälä2-7/+39
commit 18846627ef1210dcd55d65342b055ea97a46ffff upstream. Reinstate commit 88b065943cb5 ("drm/i915/dsi: Do display on sequence later on icl+"), for the most part. Turns out some machines (eg. Chuwi Minibook X) really do need that updated order. It is also the order the Windows driver uses. However we can't just undo the revert since that would again break Lenovo 82TQ. After staring at the VBT sequences for both machines I've concluded that the Lenovo 82TQ sequences look somewhat broken: - INIT_OTP is not present at all - what should be in INIT_OTP is found in DISPLAY_ON - what should be in DISPLAY_ON is found in BACKLIGHT_ON (along with the actual backlight stuff) The Chuwi Minibook X on the other hand has a full complement of sequences in its VBT. So let's try to deal with the broken sequences in the Lenovo 82TQ VBT by simply swapping the (non-existent) INIT_OTP sequence with the DISPLAY_ON sequence. Thus we execute DISPLAY_ON when intending to execute INIT_OTP, and execute nothing at all when intending to execute DISPLAY_ON. That should be 100% equivalent to the revert, for such broken VBTs. Cc: stable@vger.kernel.org Fixes: 6992eb815d08 ("Revert "drm/i915/dsi: Do display on sequence later on icl+"") References: https://gitlab.freedesktop.org/drm/intel/-/issues/10071 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10334 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240305083659.8396-1-ville.syrjala@linux.intel.com Acked-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 94ae4612ea336bfc3c12b3fc68467c6711a4f39b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03drm/i915/bios: Tolerate devdata==NULL in ↵Ville Syrjälä1-0/+3
intel_bios_encoder_supports_dp_dual_mode() commit 32e39bab59934bfd3f37097d4dd85ac5eb0fd549 upstream. If we have no VBT, or the VBT didn't declare the encoder in question, we won't have the 'devdata' for the encoder. Instead of oopsing just bail early. We won't be able to tell whether the port is DP++ or not, but so be it. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10464 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240319092443.15769-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 26410896206342c8a80d2b027923e9ee7d33b733) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03drm/i915/hwmon: Fix locking inversion in sysfs getterJanusz Krzysztofik1-18/+19
commit b212b79768ccde74429f872c37618c543fa11333 upstream. In i915 hwmon sysfs getter path we now take a hwmon_lock, then acquire an rpm wakeref. That results in lock inversion: <4> [197.079335] ====================================================== <4> [197.085473] WARNING: possible circular locking dependency detected <4> [197.091611] 6.8.0-rc7-Patchwork_129026v7-gc4dc92fb1152+ #1 Not tainted <4> [197.098096] ------------------------------------------------------ <4> [197.104231] prometheus-node/839 is trying to acquire lock: <4> [197.109680] ffffffff82764d80 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc+0x9a/0x350 <4> [197.116939] but task is already holding lock: <4> [197.122730] ffff88811b772a40 (&hwmon->hwmon_lock){+.+.}-{3:3}, at: hwm_energy+0x4b/0x100 [i915] <4> [197.131543] which lock already depends on the new lock. ... <4> [197.507922] Chain exists of: fs_reclaim --> &gt->reset.mutex --> &hwmon->hwmon_lock <4> [197.518528] Possible unsafe locking scenario: <4> [197.524411] CPU0 CPU1 <4> [197.528916] ---- ---- <4> [197.533418] lock(&hwmon->hwmon_lock); <4> [197.537237] lock(&gt->reset.mutex); <4> [197.543376] lock(&hwmon->hwmon_lock); <4> [197.549682] lock(fs_reclaim); ... <4> [197.632548] Call Trace: <4> [197.634990] <TASK> <4> [197.637088] dump_stack_lvl+0x64/0xb0 <4> [197.640738] check_noncircular+0x15e/0x180 <4> [197.652968] check_prev_add+0xe9/0xce0 <4> [197.656705] __lock_acquire+0x179f/0x2300 <4> [197.660694] lock_acquire+0xd8/0x2d0 <4> [197.673009] fs_reclaim_acquire+0xa1/0xd0 <4> [197.680478] __kmalloc+0x9a/0x350 <4> [197.689063] acpi_ns_internalize_name.part.0+0x4a/0xb0 <4> [197.694170] acpi_ns_get_node_unlocked+0x60/0xf0 <4> [197.720608] acpi_ns_get_node+0x3b/0x60 <4> [197.724428] acpi_get_handle+0x57/0xb0 <4> [197.728164] acpi_has_method+0x20/0x50 <4> [197.731896] acpi_pci_set_power_state+0x43/0x120 <4> [197.736485] pci_power_up+0x24/0x1c0 <4> [197.740047] pci_pm_default_resume_early+0x9/0x30 <4> [197.744725] pci_pm_runtime_resume+0x2d/0x90 <4> [197.753911] __rpm_callback+0x3c/0x110 <4> [197.762586] rpm_callback+0x58/0x70 <4> [197.766064] rpm_resume+0x51e/0x730 <4> [197.769542] rpm_resume+0x267/0x730 <4> [197.773020] rpm_resume+0x267/0x730 <4> [197.776498] rpm_resume+0x267/0x730 <4> [197.779974] __pm_runtime_resume+0x49/0x90 <4> [197.784055] __intel_runtime_pm_get+0x19/0xa0 [i915] <4> [197.789070] hwm_energy+0x55/0x100 [i915] <4> [197.793183] hwm_read+0x9a/0x310 [i915] <4> [197.797124] hwmon_attr_show+0x36/0x120 <4> [197.800946] dev_attr_show+0x15/0x60 <4> [197.804509] sysfs_kf_seq_show+0xb5/0x100 Acquire the wakeref before the lock and hold it as long as the lock is also held. Follow that pattern across the whole source file where similar lock inversion can happen. v2: Keep hardware read under the lock so the whole operation of updating energy from hardware is still atomic (Guenter), - instead, acquire the rpm wakeref before the lock and hold it as long as the lock is held, - use the same aproach for other similar places across the i915_hwmon.c source file (Rodrigo). Fixes: 1b44019a93e2 ("drm/i915/guc: Disable PL1 power limit when loading GuC firmware") Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: <stable@vger.kernel.org> # v6.5+ Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240311203500.518675-2-janusz.krzysztofik@linux.intel.com (cherry picked from commit 71b218771426ea84c0e0148a2b7ac52c1f76e792) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03drm/i915: Don't explode when the dig port we don't have an AUX CHVille Syrjälä1-3/+14
commit 0b385be4c3ccd5636441923d7cad5eda6b4651cb upstream. The icl+ power well code currently assumes that every AUX power well maps to an encoder which is using said power well. That is by no menas guaranteed as we: - only register encoders for ports declared in the VBT - combo PHY HDMI-only encoder no longer get an AUX CH since commit 9856308c94ca ("drm/i915: Only populate aux_ch if really needed") However we have places such as intel_power_domains_sanitize_state() that blindly traverse all the possible power wells. So these bits of code may very well encounbter an aux power well with no associated encoder. In this particular case the BIOS seems to have left one AUX power well enabled even though we're dealing with a HDMI only encoder on a combo PHY. We then proceed to turn off said power well and explode when we can't find a matching encoder. As a short term fix we should be able to just skip the PHY related parts of the power well programming since we know this situation can only happen with combo PHYs. Another option might be to go back to always picking an AUX CH for all encoders. However I'm a bit wary about that since we might in theory end up conflicting with the VBT AUX CH assignment. Also that wouldn't help with encoders not declared in the VBT, should we ever need to poke the corresponding power wells. Longer term we need to figure out what the actual relationship is between the PHY vs. AUX CH vs. AUX power well. Currently this is entirely unclear. Cc: stable@vger.kernel.org Fixes: 9856308c94ca ("drm/i915: Only populate aux_ch if really needed") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10184 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240223203216.15210-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 6a8c66bf0e565c34ad0a18f820e0bb17951f7f91) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03drm/i915: Check before removing mm notifierNirmoy Das1-0/+3
commit 01bb1ae35006e473138c90711bad1a6b614a1823 upstream. Error in mmu_interval_notifier_insert() can leave a NULL notifier.mm pointer. Catch that and return early. Fixes: ed29c2691188 ("drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7.") Cc: <stable@vger.kernel.org> # v5.13+ [tursulin: Added Fixes and cc stable.] Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Shawn Lee <shawn.c.lee@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240219125047.28906-1-nirmoy.das@intel.com Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit db7bbd13f08774cde0332c705f042e327fe21e73) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03drm/i915: Add missing ; to __assign_str() macros in tracepoint codeSteven Rostedt (Google)1-3/+3
[ Upstream commit 0df4c388a1e310400a6e90fb10b286e2673756f0 ] I'm working on improving the __assign_str() and __string() macros to be more efficient, and removed some unneeded semicolons. This triggered a bug in the build as some of the __assign_str() macros in intel_display_trace was missing a terminating semicolon. Link: https://lore.kernel.org/linux-trace-kernel/20240222133057.2af72a19@gandalf.local.home Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: stable@vger.kernel.org Fixes: 2ceea5d88048b ("drm/i915: Print plane name in fbc tracepoints") Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01drm/i915/tv: Fix TV modeMaxime Ripard2-10/+10
[ Upstream commit fb1e881273f432e593f8789f99e725b09304cc97 ] Commit 1fd4a5a36f9f ("drm/connector: Rename legacy TV property") failed to update all the users of the struct drm_tv_connector_state mode field, which resulted in a build failure in i915. However, a subsequent commit in the same series reintroduced a mode field in that structure, with a different semantic but the same type, with the assumption that all previous users were updated. Since that didn't happen, the i915 driver now compiles, but mixes accesses to the legacy_mode field and the newer mode field, but with the previous semantics. This obviously doesn't work very well, so we need to update the accesses that weren't in the legacy renaming commit. Fixes: 1fd4a5a36f9f ("drm/connector: Rename legacy TV property") Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240220131251.453060-1-mripard@kernel.org (cherry picked from commit bf7626f19d6ff14b9722273e23700400cc4d78ba) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-24 23:22:15 +0300