summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/imx/parallel-display.c
AgeCommit message (Collapse)AuthorFilesLines
2022-07-05drm: Remove linux/media-bus-format.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for linux/media-bus-format.h, so don't include it. Avoids useless rebuilds of the entire universe when touching linux/media-bus-format.h. Quite a few placs do currently depend on linux/media-bus-format.h without actually including it directly. All of those need to be fixed up. v2: Deal with ingenic as well v3: Fix up mxsfb and remaining parts of imx Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-4-ville.syrjala@linux.intel.com
2022-06-20drm: Drop drm_edid.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for drm_edid.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_edid.h. Quite a few placs do currently depend on drm_edid.h without actually including it directly. All of those need to be fixed up. v2: Fix up i915 and msm some more v3: Fix alphabetical ordering (Sam) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-04-04drm/imx: Fix memory leak in imx_pd_connector_get_modesJosé Expósito1-1/+3
Avoid leaking the display mode variable if of_get_drm_display_mode fails. Fixes: 76ecd9c9fb24 ("drm/imx: parallel-display: check return code from of_get_drm_display_mode()") Addresses-Coverity-ID: 1443943 ("Resource leak") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220108165230.44610-1-jose.exposito89@gmail.com
2022-03-16drm/imx: parallel-display: Remove bus flags check in ↵Christoph Niedermaier1-8/+0
imx_pd_bridge_atomic_check() If display timings were read from the devicetree using of_get_display_timing() and pixelclk-active is defined there, the flag DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE is automatically generated. Through the function drm_bus_flags_from_videomode() e.g. called in the panel-simple driver this flag got into the bus flags, but then in imx_pd_bridge_atomic_check() the bus flag check failed and will not initialize the display. The original commit fe141cedc433 does not explain why this check was introduced. So remove the bus flags check, because it stops the initialization of the display with valid bus flags. Fixes: fe141cedc433 ("drm/imx: pd: Use bus format/flags provided by the bridge when available") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Marek Vasut <marex@denx.de> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org To: dri-devel@lists.freedesktop.org Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220201113643.4638-1-cniedermaier@dh-electronics.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-07-28drm/bridge: Centralize error message when bridge attach failsLaurent Pinchart1-4/+1
Being informed of a failure to attach a bridge is useful, and many drivers prints an error message in that case. Move the message to drm_bridge_attach() to avoid code duplication. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
2021-01-04drm/imx: parallel-display: use drm managed resourcesPhilipp Zabel1-28/+29
Use drmm_simple_encoder_alloc() to align encoder memory lifetime with the drm device. drm_encoder_cleanup() is called automatically before the memory is freed. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: parallel-display: move initialization into probePhilipp Zabel1-22/+20
Parts of the initialization that do not require the drm device can be done once during probe instead of possibly multiple times during bind. The bind function only creates the encoder. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04drm/imx: parallel-display: use local bridge and connector variablesPhilipp Zabel1-10/+10
Use local variables for bridge and connector. This simplifies the following commits. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04gpu: drm: imx: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-10-27drm/imx: parallel-display: reduce scope of edid_lenPhilipp Zabel1-4/+3
The edid_len variable is never used again. Use a local variable instead of storing it in the device structure. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-10-27drm/imx: parallel-display: remove unused function enc_to_imxpd()Philipp Zabel1-5/+0
Remove leftover container_of helper, it has been replaced by bridge_to_imxpd(). Fixes: fe141cedc433 ("drm/imx: pd: Use bus format/flags provided by the bridge when available") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-10-27drm/imx: parallel-display: fix edid memory leakMarco Felsch1-10/+2
The edid memory is only freed if the component.unbind() is called. This is okay if the parallel-display was bound but if the bind() fails we leak the memory. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> [p.zabel@pengutronix.de: rebased, dropped now empty unbind()] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-08-12Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-21/+17
Backmerging drm-next into drm-misc-next for nouveau and panel updates. Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got renamed to struct ttm_resource. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2020-08-08drm: Remove unnecessary drm_panel_attach and drm_panel_detachJoe Perches1-6/+0
These functions are now empty and no longer useful so remove the functions and their uses. Signed-off-by: Joe Perches <joe@perches.com> Cc: Bernard Zhao <bernard@vivo.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org>, Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Icenowy Zheng <icenowy@aosc.io>, Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: dri-devel@lists.freedesktop.org, Cc: linux-kernel@vger.kernel.org Cc: opensource.kernel@vivo.com Signed-off-by: Sam Ravnborg <sam@ravnborg.org> # Fixed build and a few warnings Link: https://patchwork.freedesktop.org/patch/msgid/9e13761020750b1ce2f1fabee23ef6e2a2942882.camel@perches.com
2020-07-20drm/imx: parallel-display: move panel/bridge detection to fail earlyMarco Felsch1-6/+6
We do some string parsing and string comparison in front of drm_of_find_panel_or_bridge(). All this work is useless if the call fails. Move drm_of_find_panel_or_bridge() infront of the parsing work to fail early. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20drm/imx: drop useless best_encoder callbackMarco Felsch1-9/+0
The best_encoder() callback is used by the drm-core to find an encoder if the connector is connected to multiple encoders but the parallel, tve and ldb uses always the 1-encoder : 1-connector setup. Such a simple setup can be handled by the drm-core. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20drm/imx: parallel-display: Adjust bus_flags handlingMarek Vasut1-1/+1
The bus_flags handling logic does not seem to cover all potential usecases. Specifically, this seems to fail with an "edt,etm0700g0edh6" display attached to an 24bit display interface, with interface-pix-fmt = "rgb24" set in DT. This patch fixes the problem by overriding the imx_crtc_state->bus_flags from the imxpd->bus_flags only if the DT property "interface-pix-fmt" is present or if the DI provides no formats. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20drm/imx: fix use after freePhilipp Zabel1-5/+10
Component driver structures allocated with devm_kmalloc() in bind() are freed automatically after unbind(). Since the contained drm structures are accessed afterwards in drm_mode_config_cleanup(), move the allocation into probe() to extend the driver structure's lifetime to the lifetime of the device. This should eventually be changed to use drm resource managed allocations with lifetime of the drm device. We also need to ensure that all componets are available during the unbind() so we need to call component_unbind_all() before we free non-devres resources like planes. Note this patch fixes the the use after free bug but introduces a possible boot loop issue. The issue is triggered if the HDMI support is enabled and a component driver always return -EPROBE_DEFER, see discussion [1] for more details. [1] https://lkml.org/lkml/2020/3/24/1467 Fixes: 17b5001b5143 ("imx-drm: convert to componentised device support") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [m.felsch@pengutronix: fix imx_tve_probe()] [m.felsch@pengutronix: resort component_unbind_all()) [m.felsch@pengutronix: adapt commit message] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-04-02drm/imx: Use simple encoderThomas Zimmermann1-6/+2
The imx driver uses empty implementations for its encoders. Replace the code with the generic simple encoder. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-9-tzimmermann@suse.de
2020-02-26drm/bridge: Extend bridge API to disable connector creationLaurent Pinchart1-2/+2
Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core). Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet. The change is based on the following semantic patch, with manual review and edits. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... } @ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> } @@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
2020-01-31drm/imx: pd: Use bus format/flags provided by the bridge when availableBoris Brezillon1-25/+151
Now that bridges can expose the bus format/flags they expect, we can use those instead of the relying on the display_info provided by the connector (which is only valid if the encoder is directly connected to bridge element driving the panel/display). We also explicitly expose the bus formats supported by our encoder by filling encoder->output_bus_caps with proper info. v10: * Add changelog to the commit message * Use kmalloc() instead of kcalloc() * Add a dev_warn() when unsupported flags are requested v8 -> v9: * No changes v7: * Add an imx_pd_format_supported() helper (suggested by Philipp) * Simplify imx_pd_bridge_atomic_get_output_bus_fmts() (suggested by Philipp) * Simplify imx_pd_bridge_atomic_get_input_bus_fmts() * Explicitly set the duplicate/destro_state() and reset() hooks v4 -> v6: * Patch was not part of the series v3 (all suggested by Philipp): * Adjust to match core changes * Propagate output format to input format * Pick a default value when output_fmt = _FIXED * Add missing BGR888 and GBR888 fmts to imx_pd_bus_fmts[] v2: * Adjust things to match the new bus-format negotiation infra Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-8-boris.brezillon@collabora.com
2019-12-10drm/panel: decouple connector from drm_panelSam Ravnborg1-1/+1
To facilitate moving connector creation to display drivers, decouple the drm_connector from drm_panel. This patch adds a connector argument to drm_panel_get_modes(). All users of drm_panel_get_modes() already had the connector available, so updating users was trivial. With this patch drm_panel no longer keeps a reference to the drm_connector. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@nxp.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Torsten Duwe <duwe@lst.de> Cc: Vasily Khoruzhick <anarsoul@gmail.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Sean Paul <seanpaul@chromium.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Brian Masney <masneyb@onstation.org> Cc: Rob Clark <robdclark@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Allison Randal <allison@lohutok.net> Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-7-sam@ravnborg.org
2019-08-28drm: Stop including drm_bridge.h from drm_crtc.hBoris Brezillon1-0/+1
We are about to add a drm_bridge_state that inherits from drm_private_state which is defined in drm_atomic.h. Problem is, drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h, leading to "drm_private_state has incomplete type" error. Let's force all users of the drm_bridge API to explicitly include drm_bridge.h. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-2-boris.brezillon@collabora.com
2019-08-10drm/imx: fix opencoded use of drm_panel_*Sam Ravnborg1-7/+4
Use the drm_panel_get_modes() function to get the modes. This patch leave one test for the function pointer: panel->funcs->get_modes This is used to check if the panel may have any modes. There is no direct replacement. We may be able to just check that drm_panel_get_modes() return > 0, but as this is not the same functionality it is left for later. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-5-sam@ravnborg.org
2019-07-17drm/imx: drop use of drmP.hSam Ravnborg1-3/+5
Drop use of the deprecated drmP.h header file. While touching the include files divide them in blocks and sort the include files within each block. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Emil Velikov <emil.velikov@collabora.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-18-sam@ravnborg.org
2019-01-24drm: Split out drm_probe_helper.hDaniel Vetter1-1/+1
Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2018-11-05drm/imx: Switch to SPDX identifierFabio Estevam1-9/+1
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-13drm: drop _mode_ from drm_mode_connector_attach_encoderDaniel Vetter1-1/+1
Again to align with the usual prefix of just drm_connector_. Again done with sed + manual fixup for indent issues. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch
2018-07-13drm: drop _mode_ from update_edit_property()Daniel Vetter1-1/+1
Just makes it longer, and for most things in drm_connector.[hc] we just use the drm_connector_ prefix. Done with sed + a bit of manual fixup for the indenting. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch
2017-10-02drm/imx: parallel-display: use correct connector enumLucas Stach1-1/+1
The imx parrallel display exposes a, well, display parallel interface. Use the correct enum, instead of disguising the thing as a VGA connector. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-08-08drm: Nuke drm_atomic_helper_connector_dpmsDaniel Vetter1-1/+0
It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Peter Senna Tschudin <peter.senna@collabora.com> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Yakir Yang <kuankuan.y@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Romain Perier <romain.perier@collabora.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Hai Li <hali@codeaurora.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang <wzz@rock-chips.com> Cc: Baoyou Xie <baoyou.xie@linaro.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Archit Taneja <architt@codeaurora.org> Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Vincent Abriou <vincent.abriou@st.com>
2017-07-17drm/imx: parallel-display: Accept drm_of_find_panel_or_bridge failurePhilipp Zabel1-1/+1
The parallel panel driver should continue to work without having an endpoint linking to an panel in DT for backwards compatibility. With the recent switch to drm_of_find_panel_or_bridge, an absent panel results in a failure with -ENODEV error return code. To restore the old behaviour, ignore the -ENODEV return code. Reported-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Fixes: ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge") Tested-by: Chris Healy <cphealy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-04-07drm: convert drivers to use drm_of_find_panel_or_bridgeRob Herring1-32/+4
Similar to the previous commit, convert drivers open coding OF graph parsing to use drm_of_find_panel_or_bridge instead. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [seanpaul dropped rockchip changes since they're now obsolete] Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-12-18drm: bridge: Detach bridge from encoder at encoder cleanup timeLaurent Pinchart1-2/+0
Most drivers that use bridges forgot to detach them at cleanup time. Instead of fixing them one by one, detach the bridge in the core drm_encoder_cleanup() function. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-5-git-send-email-laurent.pinchart+renesas@ideasonboard.com
2016-12-18drm: bridge: Link encoder and bridge in core codeLaurent Pinchart1-3/+1
Instead of linking encoders and bridges in every driver (and getting it wrong half of the time, as many drivers forget to set the drm_bridge encoder pointer), do so in core code. The drm_bridge_attach() function needs the encoder and optional previous bridge to perform that task, update all the callers. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Stefan Agner <stefan@agner.ch> # For DCU Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # For atmel-hlcdc Acked-by: Vincent Abriou <vincent.abriou@st.com> # For STI Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # For sun4i Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> # For hisilicon Acked-by: Jyri Sarha <jsarha@ti.com> # For tilcdc Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com
2016-12-01drm: Make the connector .detect() callback optionalLaurent Pinchart1-7/+0
Many drivers (21 to be exact) create connectors that are always connected (for instance to an LVDS or DSI panel). Instead of forcing them to implement a dummy .detect() handler, make the callback optional and consider the connector as always connected in that case. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jyri Sarha <jsarha@ti.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Vincent Abriou <vincent.abriou@st.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [seanpaul fixed small conflict in rcar-du/rcar_du_lvdscon.c] Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-29drm/imx: parallel-display: detach bridge or panel on unbindPhilipp Zabel1-0/+5
Don't leave any bridge or panel attached to a stale driver instance when unbinding, to allow reattachment on a rebind. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-29drm/imx: don't destroy mode objects manually on driver unbindLucas Stach1-3/+0
Instead let drm_mode_config_cleanup() do the work when taking down the master device. This requires all cleanup functions to be properly hooked up to the mode object .destroy callback. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-08drm/imx: convey the pixelclk-active and de-active flags from DT to the ↵Lothar Waßmann1-3/+7
ipu-di driver The 'de-active' and 'pixelclk-active' DT properties are evaluated by of_parse_display_timing() called from of_get_drm_display_mode(), but later lost in the conversion from videomode.flags to drm_display_mode.flags. Enhance of_get_drm_display_mode() to also return the bus flags in a separate variable, so that they can be passed on to the ipu-di driver. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-14drm/imx: parallel-display: add bridge supportPhilipp Zabel1-9/+41
Add support for bridge chips connected externally to the i.MX DISP0/DISP1 DPI interfaces. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: parallel-display: check return code from of_get_drm_display_mode()Lothar Waßmann1-1/+7
of_get_drm_display_mode() may fail. Check its return code and bail out on error. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: turn remaining container_of macros into inline functionsPhilipp Zabel1-2/+5
This allows the compiler to do type checking. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: store internal bus configuration in crtc statePhilipp Zabel1-25/+38
The internal bus configuration is imx-drm specific crtc state. Store it in imx_crtc_state and let the encoder atomic_check callbacks determine bus_flags, bus_format and the sync pins, possibly taking into account the mode and the connector display info. The custom imx_drm_encoder structure can be replaced again with drm_encoder. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: remove empty mode_set encoder callbacksPhilipp Zabel1-7/+0
With atomic modeset support, these callbacks are optional. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: atomic phase 3 step 2: Legacy callback fixupsLiu Ying1-15/+3
Now that we can use atomic configurations, all the legacy callbacks of CRTCs, encoders and connectors can be switched to the atomic version. For the imx-ldb driver, there is a clock parent setting mismatch bewteen ->enable and ->disable after the switch, so a fixup is added. For the imx-tve driver, since the encoder's callback ->dpms is replaced by ->disable, we need to move the setting for the IPU_CLK_EN bit(in register TVE_COM_CONF_REG) from ->enable/->disable to ->mode_set, otherwise, the relevant CRTC cannot be disabled correctly with a warning on DC stop timeout. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: Remove encoders' ->prepare callbacksLiu Ying1-27/+29
The main task of imx encoders' ->prepare callbacks is to set bus_format, bus_flags, di_vsync_pin and di_hsync_pin. We may create a structure named imx_encoder to cache them. The atomic encoder callback ->disable may replace ->prepare later, so let's remove ->prepare. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: atomic phase 2 step 1: Wire up state ->reset, ->duplicate and ->destroyLiu Ying1-0/+4
Wire up CRTCs', planes' and connectors' ->reset, ->duplicate and ->destroy state hooks to use the default implementations from the atomic helper library. The helpers track each DRM object state. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30drm/imx: parallel-display: remove dead codeLothar Waßmann1-12/+0
The 'mode_valid' flag is never set in this driver. Remove it and the code that depends on it. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30drm/imx: use bus_flags for pixel clock polarityPhilipp Zabel1-2/+2
This patch allows panels to set pixel clock and data enable pin polarity other than the default of driving data at the falling pixel clock edge and active high display enable. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30drm/imx: parallel-display: use of_graph_get_endpoint_by_regs helperPhilipp Zabel1-12/+12
Instead of using of_graph_get_port_by_id() to get the port and then of_get_child_by_name() to get the first endpoint, get to the endpoint in a single step. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-12 10:13:06 +0300