summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/mgag200/mgag200_mode.c
AgeCommit message (Collapse)AuthorFilesLines
2024-01-10drm/mgag200: Fix gamma lut not initialized for G200ER, G200EV, G200SEJocelyn Falempe1-5/+5
commit 11f9eb899ecc8c02b769cf8d2532ba12786a7af7 upstream. When mgag200 switched from simple KMS to regular atomic helpers, the initialization of the gamma settings was lost. This leads to a black screen, if the bios/uefi doesn't use the same pixel color depth. This has been fixed with commit ad81e23426a6 ("drm/mgag200: Fix gamma lut not initialized.") for most G200, but G200ER, G200EV, G200SE use their own version of crtc_helper_atomic_enable() and need to be fixed too. Fixes: 1baf9127c482 ("drm/mgag200: Replace simple-KMS with regular atomic helpers") Cc: <stable@vger.kernel.org> #v6.1+ Reported-by: Roger Sewell <roger.sewell@cantab.net> Suggested-by: Roger Sewell <roger.sewell@cantab.net> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231214163849.359691-1-jfalempe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-12Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard1-10/+12
Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-05-11drm/mgag200: Fix gamma lut not initialized.Jocelyn Falempe1-0/+5
When mgag200 switched from simple KMS to regular atomic helpers, the initialization of the gamma settings was lost. This leads to a black screen, if the bios/uefi doesn't use the same pixel color depth. v2: rebase on top of drm-misc-fixes, and add Cc stable tag. Link: https://bugzilla.redhat.com/show_bug.cgi?id=2171155 Fixes: 1baf9127c482 ("drm/mgag200: Replace simple-KMS with regular atomic helpers") Cc: <stable@vger.kernel.org> Tested-by: Phil Oester <kernel@linuxace.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230510131034.284078-1-jfalempe@redhat.com
2023-02-20drm/mgag200: Implement struct drm_plane_helper_funcs.atomic_enableThomas Zimmermann1-7/+12
Enable the primary plane for mgag200 hardware via atomic_enable. Atomic helpers invoke this callback only when the plane becomes active. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-5-tzimmermann@suse.de
2023-02-20drm/mgag200: Remove disable handling from atomic_updateThomas Zimmermann1-3/+0
The primary plane has the atomic_disable helper set, so atomic_update won't be called if the plane gets disabled. Remove the respective branch from the helper. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-4-tzimmermann@suse.de
2022-10-20drm: Remove drm_mode_config::fb_baseZack Rusin1-1/+0
The fb_base in struct drm_mode_config has been unused for a long time. Some drivers set it and some don't leading to a very confusing state where the variable can't be relied upon, because there's no indication as to which driver sets it and which doesn't. The only usage of fb_base is internal to two drivers so instead of trying to force it into all the drivers to get it into a coherent state completely remove it. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Zimmermann <tzimemrmann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221019024401.394617-1-zack@kde.org
2022-10-13drm/mgag200: Do not call drm_atomic_add_affected_planes()Javier Martinez Canillas1-1/+1
There's no need to add planes to the atomic state. Remove the call to drm_atomic_add_affected_planes() from mgag200. On full modesets, the DRM helpers already add a CRTC's planes to the atomic state; see drm_atomic_helper_check_modeset(). There's no reason to call drm_atomic_add_affected_planes() unconditionally in the CRTC's atomic_check() in mgag200. It's also too late, as the atomic_check() of the added planes will not be called before the commit. Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-2-javierm@redhat.com
2022-10-08drm/atomic-helper: Replace drm_atomic_helper_check_crtc_state()Thomas Zimmermann1-4/+4
Rename the atomic helper function drm_atomic_helper_check_crtc_state() to drm_atomic_helper_check_crtc_primary_plane() and only check for an attached primary plane. Adapt callers. Instead of having one big function to check for various CRTC state conditions, we rather want smaller functions that drivers can pick individually. v5: * rebase on top of udl changes Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-3-tzimmermann@suse.de
2022-08-10drm/format-helper: Merge drm_fb_memcpy() and drm_fb_memcpy_toio()Thomas Zimmermann1-5/+4
Merge drm_fb_memcpy() and drm_fb_memcpy_toio() into a drm_fb_memcpy() that uses struct iosys_map for buffers. The new function also supports multi-plane color formats. Convert all users of the original helpers. v2: * rebase onto refactored mgag200 * use drm_formap_info_bpp() (Sam) * do static init in hyperv and mgag200 (Sam) * update documentation (Sam) * add TODO on vaddr location (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-4-tzimmermann@suse.de
2022-07-29drm/mgag200: Move CRTC atomic_enable to model-specific codeThomas Zimmermann1-79/+3
The CRTC atomic_enable helper contains per-model branches for G200ER, G200EV and G200SE devices. Implement a dedicated helper for each of them and remove the branches from the shared helper. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-14-tzimmermann@suse.de
2022-07-29drm/mgag200: Move mode-config to model-specific codeThomas Zimmermann1-164/+21
Move the mode-config code into model-specific code and call the plane/CRTC helpers as needed. This will help with providing per- model implementations of individual helpers. Duplication of the pipeline init function is accepted. Some macros simplify this for shared helpers. v3: * clean up style Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-13-tzimmermann@suse.de
2022-07-29drm/mgag200: Provide per-device callbacks for PIXPLLCThomas Zimmermann1-12/+8
Move the PIXPLLC code into per-model source files and wire it up with per-model callbacks. No functional changes. The PIXPLLC pixel-clock is part of the CRTC, but really separate hardware that varies with each model of the G200. Move the PIXPLLC code for each model into the per-model source file and call it from CRTC helpers via device functions. This allows to remove struct mgag200_pll and the related code. The new callbacks behave like the CRTC's atomic_check and atomic_enable functions. v3: * clean up style Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-12-tzimmermann@suse.de
2022-07-29drm/mgag200: Provide per-device callbacks for BMC synchronizationThomas Zimmermann1-97/+10
Move the BMC-related code into its own file and wire it up with device callbacks. While programming a new display mode, G200EW3 and G200WB have to de- synchronize with the BMC. Synchronization is done via VIDRST pins and controlled via VRSTEN and HRSTEN bits. Move the BMC code behind a serviceable interface and call it from the CRTC's enable and disable functions. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-11-tzimmermann@suse.de
2022-07-29drm/mgag200: Set SCROFF in primary-plane codeThomas Zimmermann1-15/+20
The SCROFF bit controls reading the primary plane's scanout buffer from video memory. Set it from primary-plane code, instead of CRTC code. v3: * only flip SCROFF when enabling/disabling the plane (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-9-tzimmermann@suse.de
2022-07-29drm/mgag200: Replace simple-KMS with regular atomic helpersThomas Zimmermann1-155/+227
Drop simple-KMS in favor of regular atomic helpers. Makes the code more modular and hence better to adapt to per-model requirements. The simple-KMS helpers provide few extra features, so the patch is mostly about open-coding what simple-KMS does. The simple-KMS helpers do mix up plane and CRTC state. Changing to regular atomic helpers requires to split some of the simple-pipe functions into per-plane and per-CRTC code No functional changes. v3: * always run drm_atomic_helper_check_plane_state() * clean up style Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-8-tzimmermann@suse.de
2022-07-29drm/mgag200: Reorganize before dropping simple-KMS helpersThomas Zimmermann1-48/+47
Move around some modesetting code before dropping simple-KMS helpers. Makes the next patch more readable. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-7-tzimmermann@suse.de
2022-07-29drm/mgag200: Store primary plane's color format in CRTC stateThomas Zimmermann1-10/+12
Store the primary plane's color format in the CRTC state and use it for programming the CRTC's gamma LUTs. Gamma tables (i.e., color management) are provided by the CRTC, but depend in the primary plane's color format. Store the format in the CRTC state and use it. This has not been an issue with simple-KMS helpers, which mix-up plane and CRTC state to some extent. For using regular atomic helpers, it's necessary to distinguish between the two. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-6-tzimmermann@suse.de
2022-07-29drm/mgag200: Acquire I/O-register lock in atomic_commit_tail functionThomas Zimmermann1-14/+21
Hold I/O-register lock in atomic_commit_tail to protect all pipeline updates at once. Protects against concurrent I/O access in get-modes helper. Complex modesetting operations involve mode changes, plane updates and possibly BMC updates. Make all this atomic wrt to reading display modes via EDID. It's not so much an issue with simple-KMS helpers, but will become necessary for using regular atomic helpers. v4: * remove empty line Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-5-tzimmermann@suse.de
2022-07-29drm/mgag200: Move ER/EW3 register initialization to per-model codeThomas Zimmermann1-6/+0
The register initialization code contains special cases for G200ER and G200EW3 hardware. Move this to per-model code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-4-tzimmermann@suse.de
2022-07-29drm/mgag200: Move DAC-register setup into model-specific codeThomas Zimmermann1-79/+1
Provide an init function for each model's DAC registers. Remove the shared helper. The code for initializing the DAC registers consisted of a large table of default value, plus many exceptions for the various G200 models. Providing a per-model implementation makes if more readable. At some point, some of the initialization should probably move into the modesetting code. v2: * don't duplicate DAC values unnecessarily (Sam, Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-3-tzimmermann@suse.de
2022-07-29drm/mgag200: Split mgag200_modeset_init()Thomas Zimmermann1-9/+32
Split mgag200_modeset_init() into smaller helpers to initialize the mode_config structure and the pipeline. This will be helpful for transforming this code into per-model functions. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-2-tzimmermann@suse.de
2022-07-26drm: Remove unnecessary include statements of drm_plane_helper.hThomas Zimmermann1-1/+0
Remove the include statement for drm_plane_helper.h from all the files that don't need it. Althogh the header file is almost empty, many drivers include it somewhere. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de
2022-06-20drm: Drop drm_framebuffer.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for drm_frambuffer.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_framebuffer.h. Quite a few placs do currently depend on drm_framebuffer.h without actually including it directly. All of those need to be fixed up. v2: Fix up msm some more v2: Deal with ingenic and shmobile as well Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-07drm/mgag200: Store vidrst flag in device infoThomas Zimmermann1-3/+4
Set new vidrst flag in device info for models that synchronize with external sources (i.e., BMCs). In modesetting, set the corresponding bits from the device-info flag. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-10-tzimmermann@suse.de
2022-06-07drm/mgag200: Store maximum resolution and memory bandwidth in device infoThomas Zimmermann1-49/+20
The maximum resolution and memory bandwidth are model-specific limits. Both are used during display-mode validation. Store the values in struct mgag200_device_info and simplify the validation code. v2: * 'bandwith' -> 'bandwidth' in commit message Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-9-tzimmermann@suse.de
2022-06-07drm/mgag200: Store HW_BUG_NO_STARTADD flag in device infoThomas Zimmermann1-1/+1
Flag devices with broken handling of the startadd field in struct mgag200_device_info, instead of PCI driver data. This reduces the driver data to a simple type constant. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-8-tzimmermann@suse.de
2022-06-07drm/mgag200: Implement new init logicThomas Zimmermann1-6/+1
Rework mgag200_regs_init() and mgag200_mm_init() into device preinit and init functions. The preinit function, mgag200_device_preinit(), requests and maps a device's I/O and video memory. The init function, mgag200_device_init() initializes the state of struct mga_device. Splitting the initialization between the two functions is necessary to perform per-model operations between the two calls, such as reading the unique revision ID on G200SEs. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-6-tzimmermann@suse.de
2022-06-07drm/mgag200: Call mgag200_device_probe_vram() from per-model initThomas Zimmermann1-2/+9
Call mgag200_device_probe_vram() from each model's initializer. The G200EW3 uses a special helper with additional instructions. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-5-tzimmermann@suse.de
2022-06-07drm/mgag200: Initialize each model in separate functionThomas Zimmermann1-11/+14
Add a separate initializer function for each model. Add separate devic structures for G200 and G200SE, which require additional information. Also move G200's and G200SE's helpers for reading the BIOS and version id into model-specific code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-3-tzimmermann@suse.de
2022-06-07drm/mgag200: Remove special case for G200SE with <2 MiBThomas Zimmermann1-12/+1
Remove old test for 32-bit vs 16-bit colors. Prefer 24-bit color depth on all devices. 32-bit color depth doesn't exist, it should have always been 24-bit. G200SE with less than 2 MiB of video memory have defaulted to 16-bit color depth, as the original revision of the G200SE had only 1.75 MiB of video memory. Using 16-bit colors enabled XGA resolution. But we now already limit these devices to VGA resolutions as the memory-bandwith test assumes 32-bit pixel size. So drop the special case from color-depth selection. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-2-tzimmermann@suse.de
2022-05-17drm/mgag200: Split up connector's mode_valid helperThomas Zimmermann1-77/+69
Split up the connector's mode_valid helper into a simple-pipe and a mode-config helper. The simple-pipe helper tests for display-size limits while the mode-config helper tests for memory-bandwidth limits. Also add the mgag200_ prefix to mga_vga_calculate_mode_bandwidth() and comment on the function's purpose. The memory-bandwidth tests assume that the display uses 4 bytes per pixel. The first models of G200SE-A only had 1.75 MiB of VRAM, which limits these devices to 640x480-32. v2: * note the memory constraints on early G200SE-A Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-8-tzimmermann@suse.de
2022-05-17drm/mgag200: Test memory requirements in drm_mode_config_funcs.mode_validThomas Zimmermann1-14/+21
Test for a mode's memory requirements in the device-wide mode_valid helper. For simplicify, always assume a 32-bit color format. While some rejected modes would work with less colors, implementing this is probably not worth the effort. Also remove the memory-related test from the connector's mode_valid helper. The test uses the bpp value that users can specify on the kernel's command line. This value is unrelated and the test would belong into atomic_check. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-7-tzimmermann@suse.de
2022-05-17drm/mgag200: Remove struct mga_connectorThomas Zimmermann1-30/+14
struct mga_connector has outlived its purpose. Inline the rsp init helper into the mode-config code and remove the data structure. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-6-tzimmermann@suse.de
2022-05-17drm/mgag200: Switch I2C code to managed cleanupThomas Zimmermann1-19/+5
Store the I2C state within struct mga_device and switch I2C to managed release. Simplifies the related code and lets us remove mga_connector_destroy(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-5-tzimmermann@suse.de
2022-05-17drm/mgag200: Implement connector's get_modes with helperThomas Zimmermann1-13/+4
Provide drm_connector_helper_get_modes_from_ddc() to implement the connector's get_modes callback. The new helper updates the connector from DDC-provided EDID data. v2: * clear property if EDID is NULL in helper Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-4-tzimmermann@suse.de
2022-05-17drm/mgag200: Fail on I2C initialization errorsThomas Zimmermann1-2/+5
Initialization of the I2C adapter was allowed to fail. The mgag200 driver would have continued without DDC support. Had this happened in practice, it would have led to segmentation faults in the connector code. Resolve this problem by failing driver initialization on I2C- related errors. v2: * initialize 'ret' before drm_err() (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-3-tzimmermann@suse.de
2022-05-17drm/mgag200: Acquire I/O lock while reading EDIDThomas Zimmermann1-0/+10
DDC operation conflicts with concurrent mode setting. Acquire the driver's I/O lock in get_modes to prevent this. This change should have been part of commit 931e3f3a0e99 ("drm/mgag200: Protect concurrent access to I/O registers with lock"), but apparently got lost somewhere. v3: * fix commit message to say 'drm/mgag200' (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 931e3f3a0e99 ("drm/mgag200: Protect concurrent access to I/O registers with lock") Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-2-tzimmermann@suse.de
2022-05-16drm/mgag200: Enable atomic gamma lut updateJocelyn Falempe1-44/+83
Add support for atomic update of gamma lut. With this patch the "Night light" feature of gnome3 is working properly on mgag200. v2: - Add a default linear gamma function - renamed functions with mgag200 prefix - use format's 4cc code instead of bit depth - use better interpolation for 16bits gamma - remove legacy function mga_crtc_load_lut() - can't remove the call to drm_mode_crtc_set_gamma_size() because it doesn't work with userspace. - other small refactors v3: - change mgag200_crtc_set_gamma*() argument to struct drm_format_info *format - fix printk format to %p4cc for 4cc and %zu for size_t - rebased to drm-misc-next. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220513084900.1832381-1-jfalempe@redhat.com
2022-05-12drm/mgag200: Warn once if trying to set start address on broken hardware.Jocelyn Falempe1-0/+3
Some MGA200 hardware is broken and can't use a start address > 0. v2: Warn if startaddr is not 0, and hw doesn't support it. (instead of removing MGAG200_FLAG_HW_BUG_NO_STARTADD) Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220504134026.283417-4-jfalempe@redhat.com
2022-05-12drm/mgag200: Optimize damage clipsJocelyn Falempe1-5/+11
When there are multiple damage clips, previous code merged them into one big rectangle. As the Matrox memory is very slow, it's faster to copy each damage clip. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220504134026.283417-2-jfalempe@redhat.com
2022-05-12drm/mgag200: Add FB_DAMAGE_CLIPS supportJocelyn Falempe1-0/+2
The driver does support damage clips, but doesn't advertise it. So when running gnome/wayland on Matrox hardware, the full frame is copied to the slow Matrox memory, which leads to very poor performances. Add drm_plane_enable_fb_damage_clips() to advertise this capability to userspace. With this patch, gnome/wayland becomes usable on Matrox GPU. Suggested-by: Jonas Ådahl <jadahl@gmail.com> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220504134026.283417-2-jfalempe@redhat.com
2022-05-05drm/mgag200: Protect concurrent access to I/O registers with lockThomas Zimmermann1-0/+14
Add a mutex lock to protect concurrent access to I/O registers against each other. This happens between invocation of commit- tail functions and get-mode operations. Both with use the CRTC index registers MGA1064_GEN_IO_DATA and MGA1064_GEN_IO_CTL. Concurrent access can lead to failed mode-setting operations. v2: * fix typo in commit description (Jocelyn) * add comment to explain rmmio_lock Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220502142514.2174-4-tzimmermann@suse.de
2022-02-11Merge tag 'drm-intel-next-2022-02-08' of ↵Dave Airlie1-2/+2
git://anongit.freedesktop.org/drm/drm-intel into drm-next Cross-subsystem Changes: ------------------------ dma-buf: - dma-buf-map: Rename to iosys-map (Lucas) Core Changes: ------------- drm: - Always include the debugfs_entry in drm_crtc (Ville) - Add orientation quirk for GPD Win Max (Anisse) Driver Changes: --------------- gvt: - Constify some pointers. (Rikard Falkeborn) - Use list_entry to access list members. (Guenter Roeck) - Fix cmd parser error for Passmark9. (Zhenyu Wang) i915: - Various clean-ups including headers and removing unused and unnecessary stuff\ (Jani, Hans, Andy, Ville) - Cleaning up on our registers definitions i915_reg.h (Matt) - More multi-FBC refactoring (Ville) - Baytrail backlight fix (Hans) - DG1 OPROM read through SPI controller (Clint) - ADL-N platform enabling (Tejas) - Fix slab-out-of-bounds access (Jani) - Add opregion mailbox #5 support for possible EDID override (Anisse) - Fix possible NULL dereferences (Harish) - Updates and fixes around display voltage swing values (Clint, Jose) - Fix RPM wekeref on PXP code (Juston) - Many register definitions clean-up, including planes registers (Ville) - More conversion towards display version over the old gen (Madhumitha, Ville) - DP MST ESI handling improvements (Jani) - drm device based logging conversions (Jani) - Prevent divide by zero (Dan) - Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville) - Async flip optimization for DG2 (Stanislav) - Multiple DSC and bigjoiner fixes and improvements (Ville) - Fix ADL-P TypeC Phy ready status readout (Imre) - Fix up DP DFP 4:2:0 handling more display related fixes (Ville) - Display M/N cleanup (Ville) - Switch to use VGA definitions from video/vga.h (Jani) - Fixes and improvements to abstract CPU architecture (Lucas) - Disable unsused power wells left enabled by BIOS (Imre) - Allow !join_mbus cases for adlp+ dbuf configuration (Ville) - Populate pipe dbuf slices more accurately during readout (Ville) - Workaround broken BIOS DBUF configuration on TGL/RKL (Ville) - Fix trailing semicolon (Lucas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YgKFLmCgpv4vQEa1@intel.com
2022-02-08dma-buf-map: Rename to iosys-mapLucas De Marchi1-2/+2
Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-01-19mgag200 fix memmapsl configuration in GCTL6 registerJocelyn Falempe1-1/+4
On some servers with MGA G200_SE_A (rev 42), booting with Legacy BIOS, the hardware hangs when using kdump and kexec into the kdump kernel. This happens when the uncompress code tries to write "Decompressing Linux" to the VGA Console. It can be reproduced by writing to the VGA console (0xB8000) after booting to graphic mode, it generates the following error: kernel:NMI: PCI system error (SERR) for reason a0 on CPU 0. kernel:Dazed and confused, but trying to continue The root cause is the configuration of the MGA GCTL6 register According to the GCTL6 register documentation: bit 0 is gcgrmode: 0: Enables alpha mode, and the character generator addressing system is activated. 1: Enables graphics mode, and the character addressing system is not used. bit 1 is chainodd even: 0: The A0 signal of the memory address bus is used during system memory addressing. 1: Allows A0 to be replaced by either the A16 signal of the system address (ifmemmapsl is ‘00’), or by the hpgoddev (MISC<5>, odd/even page select) field, described on page 3-294). bit 3-2 are memmapsl: Memory map select bits 1 and 0. VGA. These bits select where the video memory is mapped, as shown below: 00 => A0000h - BFFFFh 01 => A0000h - AFFFFh 10 => B0000h - B7FFFh 11 => B8000h - BFFFFh bit 7-4 are reserved. Current code set it to 0x05 => memmapsl to b01 => 0xa0000 (graphic mode) But on x86, the VGA console is at 0xb8000 (text mode) In arch/x86/boot/compressed/misc.c debug strings are written to 0xb8000 As the driver doesn't use this mapping at 0xa0000, it is safe to set it to 0xb8000 instead, to avoid kernel hang on G200_SE_A rev42, with kexec/kdump. Thus changing the value 0x05 to 0x0d Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220119102905.1194787-1-jfalempe@redhat.com
2021-11-11drm/format-helper: Rework format-helper memcpy functionsThomas Zimmermann1-1/+3
Move destination-buffer clipping from all format-helper memcpy function into callers. Support destination-buffer pitch. Only distinguish between system and I/O memory, but use same logic everywhere. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-3-tzimmermann@suse.de
2021-08-08drm/mgag200: Use offset-adjusted shadow-plane mappingsThomas Zimmermann1-2/+2
For framebuffers with non-zero offset fields, shadow-plane helpers provide a pointer to the first byte of the contained data. Use it in mgag200. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-6-tzimmermann@suse.de
2021-08-08drm/mgag200: Compute PLL values during atomic checkThomas Zimmermann1-18/+20
PLL setup can fail if the display mode's clock is not supported by any PLL configuration. Compute the PLL values during atomic check, so that atomic commits can fail at the appropriate time. If successful, use the values in the atomic-update phase. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-14-tzimmermann@suse.de
2021-08-08drm/mgag200: Introduce custom CRTC stateThomas Zimmermann1-0/+46
Inherit from struct drm_crtc_state by embeding it and providing the rsp callbacks for simple-kms helpers. No functional changes. The new state struct mgag200_crtc_state will hold PLL values for modeset operations. v2: * move the simple-kms changes into a separate patch (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-13-tzimmermann@suse.de
2021-08-08drm/mgag200: Abstract pixel PLL via struct mgag200_pllThomas Zimmermann1-901/+8
Move all PLL compute and update functions into mgag200_pll.c. No functional changes to the rsp algorithms. Introduce struct mgag200_pll and mgag200_pll_funcs. The data strutures abstract the details of each revision's PLL. Perform calls to compute and update functionality via function pointers. Init the PLL once as part of the driver initialization. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-11-tzimmermann@suse.de
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-07 13:47:19 +0300