| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
there is a repeated word "or" in comments, so remove it.
Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220718145536.4866-1-dengshaomin@cdjrlc.com
|
|
Set new vidrst flag in device info for models that synchronize with
external sources (i.e., BMCs). In modesetting, set the corresponding
bits from the device-info flag.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-10-tzimmermann@suse.de
|
|
Put the clock-selection code into each of the PLL-update functions to
make them select the correct pixel clock. Instead of copying the code,
introduce a new helper WREG_MISC_MASKED, which does masked writes into
<MISC>. Use it from each individual PLL update function.
The pixel clock for video output was not actually set before programming
the clock's values. It worked because the device had the correct clock
pre-set.
v2:
* don't duplicate <MISC> update code (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: db05f8d3dc87 ("drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.9+
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-2-tzimmermann@suse.de
|
|
MGA cards can run in traditional VGA mode or an enhanced MGA mode; with
the latter being required for KMS. So far, MGA mode was enabled during
modesetting. As it's fundamental for device operation, the patch moves
it next to the device register setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-5-tzimmermann@suse.de
|
|
The mgag200 driver maps registers into the address space. Move the
code into a separate helper function. No functional changes.
One small difference is in the handling of SDRAM/SGRAM. MGA devices
can come with either SDRAM or SGRAM. So far, the driver checked for
SDRAM, which is the common case. The patch moves this code into a
separate helper and checks for SGRAM, which is the special case. The
test itself is the same as before.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-3-tzimmermann@suse.de
|
|
Modifying the <syncrst> field in mgag200_{enable,disable}_display()
makes the code more readable. Also clear the <asyncrst> field to enable
the display. The other bits in SEQ0 are unused, so no functional changes
are made.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-6-tzimmermann@suse.de
|
|
Of the DPMS code, only ON and OFF states are used. Simplify mode setting
by moving both into separate functions and removing the rest.
The original code busy waited in the middle of updating the screen state
in SEQ1. To simplify the procedure, the new code busy waits first and then
updates SEQ1 in one chunk.
The DPMS code also set the LUT before enabling the screen. The patch moves
this code into the simple-display pipe's enable function.
v2:
* comment on SEQ1 updates in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-5-tzimmermann@suse.de
|
|
The prepare function write-protects several registers that it doesn't
even touch. Removed the related code.
The code for unprotecting registers also clears VINT interrupts. Both
is now done once during initialization.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-2-tzimmermann@suse.de
|
|
The TAGFIFO state is now reset in mgag200_g200er_reset_tagfifo().
v2:
* define MGAREG_SEQ1_SCROFF
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-10-tzimmermann@suse.de
|
|
The framebuffer's pitch is now set in mgag200_set_offset().
v2:
* move offset and bpp-shift calculation into helper functions
* use u8 instead of uint8_t
* add MGAREG_CRTCEXT0_OFFSET_MASK
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-8-tzimmermann@suse.de
|
|
Set different fields in MISC in their rsp location in the code. This
patch also fixes a bug in the original code where the mode's SYNC flags
were never written into the MISC register.
v2:
* use u8 instead of uint8_t
* define MGAREG_MISC_CLK_SEL_MASK
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-6-tzimmermann@suse.de
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
G200 cards support, at best, 16 colour palleted images for the cursor
so we do a conversion in the cursor_set function, and reject cursors
with more than 16 colours, or cursors with partial transparency. Xorg
falls back gracefully to software cursors in this case.
We can't disable/enable the cursor hardware without causing momentary
corruption around the cursor. Instead, once the cursor is on we leave
it on, and simulate turning the cursor off by moving it
offscreen. This works well.
Since we can't disable -> update -> enable the cursors, we double
buffer cursor icons, then just move the base address that points to
the old cursor, to the new. This also works well, but uses an extra
page of memory.
The cursor buffers are lazily-allocated on first cursor_set. This is
to make sure they don't take priority over any framebuffers in case of
limited memory.
Here is a representation of how the bitmap for the cursor is mapped in G200 memory :
Each line of color cursor use 6 Slices of 8 bytes. Slices 0 to 3
are used for the 4bpp bitmap, slice 4 for XOR mask and slice 5 for
AND mask. Each line has the following format:
// Byte 0 Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7
//
// S0: P00-01 P02-03 P04-05 P06-07 P08-09 P10-11 P12-13 P14-15
// S1: P16-17 P18-19 P20-21 P22-23 P24-25 P26-27 P28-29 P30-31
// S2: P32-33 P34-35 P36-37 P38-39 P40-41 P42-43 P44-45 P46-47
// S3: P48-49 P50-51 P52-53 P54-55 P56-57 P58-59 P60-61 P62-63
// S4: X63-56 X55-48 X47-40 X39-32 X31-24 X23-16 X15-08 X07-00
// S5: A63-56 A55-48 A47-40 A39-32 A31-24 A23-16 A15-08 A07-00
//
// S0 to S5 = Slices 0 to 5
// P00 to P63 = Bitmap - pixels 0 to 63
// X00 to X63 = always 0 - pixels 0 to 63
// A00 to A63 = transparent markers - pixels 0 to 63
// 1 means colour, 0 means transparent
Signed-off-by: Christopher Harvey <charvey@matrox.com>
Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com>
Acked-by: Julia Lemire <jlemire@matrox.com>
Tested-by: Julia Lemire <jlemire@matrox.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
|
|
This is a driver for the G200 server engines chips,
it doesn't driver any of the Matrix G series desktop cards.
It will bind to G200 SE A,B, G200EV, G200WB, G200EH and G200ER cards.
Its based on previous work done my Matthew Garrett but remodelled
to follow the same style and flow as the AST server driver. It also
works along the same lines as the AST server driver wrt memory management.
There is no userspace driver planned, xf86-video-modesetting should be used.
It also appears these GPUs have no ARGB hw cursors.
v2: add missing tagfifo reset + G200 SE memory bw setup pieces.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
