summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/disp
AgeCommit message (Collapse)AuthorFilesLines
2021-04-02drm/msm/disp/dpu1: program 3d_merge only if block is attachedKalyan Thota1-1/+3
Update the 3d merge as active in the data path only if the hw block is selected in the configuration. Reported-by: Stephen Boyd <swboyd@chromium.org> Fixes: 73bfb790ac78 ("msm:disp:dpu1: setup display datapath for SC7180 target") Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Message-Id: <1617364493-13518-1-git-send-email-kalyan_t@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-03-23drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resumeKalyan Thota1-5/+7
DPU runtime resume will request for a min vote on the AXI bus as it is a necessary step before turning ON the AXI clock. The change does below 1) Move the icc path set before requesting runtime get_sync. 2) remove the dependency of hw catalog for min ib vote as it is initialized at a later point. Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-02-05drm/msm/disp/mdp5: mdp5_cfg: Fix msm8974v2 max_clkKonrad Dybcio1-1/+1
The maximum mdp clock rate on msm8974v2 is 320MHz. Fix it. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-31drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: Remove unneeded semicolonXu Wang1-1/+1
fix semicolon.cocci warnings: drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:752:2-3: Unneeded semicolon Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-31drm/msm/mdp5: Fix wait-for-commit for cmd panelsIskren Chernev1-1/+1
Before the offending commit in msm_atomic_commit_tail wait_flush was called once per frame, after the commit was submitted. After it wait_flush is also called at the beginning to ensure previous potentially async commits are done. For cmd panels the source of wait_flush is a ping-pong irq notifying a completion. The completion needs to be notified with complete_all so multiple waiting parties (new async committers) can proceed. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Suggested-by: Rob Clark <robdclark@gmail.com> Fixes: 2d99ced787e3d ("drm/msm: async commit support") Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-31drm/msm/dpu1: add support for qseed3lite used on sm8250Dmitry Baryshkov7-7/+112
SM8250 has quite unique qseed lut type: qseed3lite, which is a lightweight version of qseed3 scaler. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-31drm/msm/dpu: Remove unused call in wait_for_commit_doneAngeloGioacchino Del Regno1-8/+3
The call to dpu_encoder_phys_cmd_prepare_for_kickoff is useless as it's unused because the serialize_wait4pp variable is never set to true by .. anything, literally: remove the call. While at it, also reduce indentation by inverting the check for dpu_encoder_phys_cmd_is_master. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-31drm/msm/dpu: Correctly configure vsync tearcheck for command modeAngeloGioacchino Del Regno1-7/+4
When configuring the tearcheck, the parameters for the engine were being set mostly as they should've been, but then it wasn't getting configured to get the vsync indication from the TE GPIO input because it was assumed that autorefresh could be enabled: since a previous commit makes sure to disable the autorefresh bit when committing to the cmd engine, it is now safe to just enable the vsync pin input at tearcheck setup time (instead of erroneously never enabling it). Also, set the right sync_cfg_height to enable the DPU auto-generated TE signal in order to avoid stalls in the event that we miss one external TE signal: this will still trigger recovery mechanisms in case the display is really unreachable. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-31drm/msm/dpu: Disable autorefresh in command modeAngeloGioacchino Del Regno3-0/+108
When a command mode display is used, it may be retaining the bootloader configuration which, in most of the cases, enables the autorefresh feature in order to keep the splash up. Since there is no autorefresh management in this driver, wire up the autorefresh ops in the dpu_hw_pingpong and disable the feature when preparing for cmd commit: instead of disabling it when initializing the command mode, this road was chosen as to open future possibility of enabling and managing the autorefresh feature in the driver. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-31drm/msm/dpu: Allow specifying features and sblk in DSPP_BLK macroAngeloGioacchino Del Regno1-7/+12
The DSPP_BLK macro was ad-hoc made for SC7180, but this is wrong because not all of the DPU DSPP versions can use the same DSPP block configuration, and not all of them have got the same features. For this reason, add two more params to the DSPP_BLK macro, so that it is possible to specify the feature mask and the sblk config for each DSPP. Fixes: 4259ff7ae509 ("drm/msm/dpu: add support for pcc color block in dpu driver") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-31drm/msm/dpu: Add prog_fetch_lines_worst_case to INTF_BLK macroAngeloGioacchino Del Regno1-12/+12
Not all DPU interface sub-block versions need the same value for prog_fetch_lines_worst_case: add this to the INTF_BLK macro, so that it becomes possible to vary it for other INTF versions. For example, this is needed to implement support for older SoCs, like MSM8998 and SDM630/660 and most probably will also be needed for future SoCs. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-31drm/msm/dpu: Move DPU_SSPP_QOS_8LVL bit to SDM845 and SC7180 masksAngeloGioacchino Del Regno1-3/+3
Not all DPU versions that are supported in this driver are supposed to have a 8-Levels VIG QoS setting. Move this flag to SDM845 and SC7180 specific masks. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-31drm/msm/dpu: Fix VBIF_XINL_QOS_LVL_REMAP_000 register offsetAngeloGioacchino Del Regno1-4/+5
On DPUs prior to version 4 the VBIF_XINL_QOS_LVL_REMAP_000 register is at 0x570 offset from vbif base instead of 0x590, due to the VBIF_XINL_QOS_RP_REMAP_000 having less instances (less possible XINs). Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-12-10Merge tag 'drm-msm-next-2020-12-07' of ↵Dave Airlie33-253/+543
https://gitlab.freedesktop.org/drm/msm into drm-next * Shutdown hook for GPU (to ensure GPU is idle before iommu goes away) * GPU cooling device support * DSI 7nm and 10nm phy/pll updates * Additional sm8150/sm8250 DPU support (merge_3d and DSPP color processing) * Various DP fixes * A whole bunch of W=1 fixes from Lee Jones * GEM locking re-work (no more trylock_recursive in shrinker!) * LLCC (system cache) support * Various other fixes/cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt0G=H3_RbF_GAQv838z5uujSmFd+7fYhL6Yg=23LwZ=g@mail.gmail.com
2020-12-05drm/msm/dpu: enable DSPP support on SM8[12]50Dmitry Baryshkov2-7/+22
Add support for color correction sub block on SM8150 and SM8250. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-12-03drm/msm/dpu: update the qos remap only if the client type changesAbhinav Kumar2-2/+17
Update the qos remap only if the client type changes for the plane. This will avoid unnecessary register programming and also avoid log spam from the dpu_vbif_set_qos_remap() function. changes in v2: - get rid of the dirty flag and simplify the logic to call _dpu_plane_set_qos_remap() Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-12-03drm/msm/disp/dpu1/dpu_hw_interrupts: Demote kernel-doc formatting misuseLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:246: error: Cannot parse struct or union! drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:756: error: Cannot parse struct or union! Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Shubhashree Dhar <dhar@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29drm/msm/dpu: consider vertical front porch in the prefill bw calculationKalyan Thota1-2/+9
In case of panels with low vertical back porch, the prefill bw requirement will be high as we will have less time(vbp+pw) to fetch and fill the hw latency buffers before start of first line in active period. For ex: Say hw_latency_line_buffers = 24, and if blanking vbp+pw = 10 Here we need to fetch 24 lines of data in 10 line times. This will increase the bw to the ratio of linebuffers to blanking. DPU hw can also fetch data during vertical front porch provided interface prefetch is enabled. Use vfp in the prefill calculation as dpu driver enables prefetch if the blanking is not sufficient to fill the latency lines. Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Tested-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29drm/msm/disp/dpu1/dpu_plane: Fix some spelling and missing function param ↵Lee Jones1-3/+5
descriptions Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:152: warning: Function parameter or member 'plane' not described in '_dpu_plane_calc_bw' drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:152: warning: Function parameter or member 'fb' not described in '_dpu_plane_calc_bw' drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:152: warning: Excess function parameter 'Plane' description in '_dpu_plane_calc_bw' drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:200: warning: Function parameter or member 'plane' not described in '_dpu_plane_calc_clk' drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:200: warning: Excess function parameter 'Plane' description in '_dpu_plane_calc_clk' drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:232: warning: Function parameter or member 'src_width' not described in '_dpu_plane_calc_fill_level' drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:232: warning: Excess function parameter 'src_wdith' description in '_dpu_plane_calc_fill_level' drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1060: warning: Function parameter or member 'error' not described in 'dpu_plane_set_error' Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Kalyan Thota <kalyan_t@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29drm/msm/disp/dpu1/dpu_vbif: Fix a couple of function param descriptionsLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c:150: warning: Function parameter or member 'dpu_kms' not described in 'dpu_vbif_set_ot_limit' drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c:150: warning: Excess function parameter 'vbif' description in 'dpu_vbif_set_ot_limit' Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29drm/msm/disp/dpu1/dpu_rm: Fix formatting issues and supply 'global_state' ↵Lee Jones1-2/+3
description Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c:247: warning: Excess function parameter 'Return' description in '_dpu_rm_check_lm_peer' drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c:283: warning: Function parameter or member 'global_state' not described in '_dpu_rm_check_lm_and_get_connected_blks' drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c:283: warning: Excess function parameter 'Return' description in '_dpu_rm_check_lm_and_get_connected_blks' Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Drew Davenport <ddavenport@chromium.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29drm/msm/disp/dpu1/dpu_hw_sspp: Fix kernel-doc formatting abuseLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:240: warning: Function parameter or member 'ctx' not described in 'dpu_hw_sspp_setup_format' drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:240: warning: Function parameter or member 'fmt' not described in 'dpu_hw_sspp_setup_format' drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:240: warning: Function parameter or member 'flags' not described in 'dpu_hw_sspp_setup_format' drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:240: warning: Function parameter or member 'rect_mode' not described in 'dpu_hw_sspp_setup_format' drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:446: warning: Function parameter or member 'ctx' not described in 'dpu_hw_sspp_setup_rects' drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:446: warning: Function parameter or member 'cfg' not described in 'dpu_hw_sspp_setup_rects' drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:446: warning: Function parameter or member 'rect_index' not described in 'dpu_hw_sspp_setup_rects' Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jonathan Marek <jonathan@marek.ca> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29drm/msm/disp/dpu1/dpu_hw_lm: Fix misnaming of parameter 'ctx'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c:55: warning: Function parameter or member 'ctx' not described in '_stage_offset' drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c:55: warning: Excess function parameter 'c' description in '_stage_offset' Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29drm/msm/disp/dpu1/dpu_encoder: Fix a few parameter/member formatting issuesLee Jones1-7/+8
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:207: warning: Function parameter or member 'cur_slave' not described in 'dpu_encoder_virt' drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:207: warning: Function parameter or member 'hw_pp' not described in 'dpu_encoder_virt' drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:207: warning: Function parameter or member 'intfs_swapped' not described in 'dpu_encoder_virt' drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1445: warning: Function parameter or member 'drm_enc' not described in '_dpu_encoder_trigger_flush' drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1445: warning: Function parameter or member 'phys' not described in '_dpu_encoder_trigger_flush' drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1445: warning: Function parameter or member 'extra_flush_bits' not described in '_dpu_encoder_trigger_flush' drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1481: warning: Function parameter or member 'phys' not described in '_dpu_encoder_trigger_start' drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1564: warning: Function parameter or member 'dpu_enc' not described in '_dpu_encoder_kickoff_phys' Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29drm/msm/disp/dpu1/dpu_hw_catalog: Move definitions to the only place they ↵Lee Jones3-90/+83
are used These tables are not large or overbearing, so moving them into the source file seems like the right thing to do. The alternative is to use __maybe_unused, which is undesirable. Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c:11: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog_format.h:7:23: warning: ‘qcom_compressed_supported_formats’ defined but not used [-Wunused-const-variable=] 7 | static const uint32_t qcom_compressed_supported_formats[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog_format.h:48:23: warning: ‘plane_formats_yuv’ defined but not used [-Wunused-const-variable=] 48 | static const uint32_t plane_formats_yuv[] = { | ^~~~~~~~~~~~~~~~~ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog_format.h:17:23: warning: ‘plane_formats’ defined but not used [-Wunused-const-variable=] 17 | static const uint32_t plane_formats[] = { | ^~~~~~~~~~~~~ Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29drm/msm/disp/dpu1/dpu_hw_catalog: Remove duplicated initialisation of ↵Lee Jones1-1/+0
'max_linewidth' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c:124:19: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c:124:19: note: (near initialization for ‘sm8250_dpu_caps.max_linewidth’) Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29drm/msm/disp/dpu1/dpu_formats: Demote non-conformant kernel-doc headerLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'fmt' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'a' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'r' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'g' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'b' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'e0' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'e1' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'e2' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'e3' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'uc' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'alpha' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'bp' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'flg' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'fm' not described in 'INTERLEAVED_RGB_FMT' drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'np' not described in 'INTERLEAVED_RGB_FMT' Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Fritz Koenig <frkoenig@google.com> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29drm/msm/disp/dpu1/dpu_hw_blk: Add one missing and remove an extra param ↵Lee Jones1-1/+1
description Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_hw_blk.c:28: warning: Function parameter or member 'hw_blk' not described in 'dpu_hw_blk_init' drivers/gpu/drm/msm/disp/dpu1/dpu_hw_blk.c:120: warning: Excess function parameter 'free_blk' description in 'dpu_hw_blk_put' Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29drm/msm/disp/dpu1/dpu_core_perf: Fix kernel-doc formatting issuesLee Jones1-8/+9
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:31: warning: Enum value 'DPU_PERF_MODE_MAX' not described in enum 'dpu_perf_mode' drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:34: warning: Cannot understand * @_dpu_core_perf_calc_bw() - to calculate BW per crtc drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:73: warning: Function parameter or member 'kms' not described in '_dpu_core_perf_calc_clk' drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:73: warning: Function parameter or member 'crtc' not described in '_dpu_core_perf_calc_clk' drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:73: warning: Function parameter or member 'state' not described in '_dpu_core_perf_calc_clk' drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:249: warning: Cannot understand * @dpu_core_perf_crtc_release_bw() - request zero bandwidth Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Kalyan Thota <kalyan_t@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29msm/mdp5: Fix some kernel-doc warningsRob Clark1-1/+10
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:227: warning: Function parameter or member 'ctl' not described in 'mdp5_ctl_set_encoder_state' drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:227: warning: Function parameter or member 'pipeline' not described in 'mdp5_ctl_set_encoder_state' drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:227: warning: Function parameter or member 'enabled' not described in 'mdp5_ctl_set_encoder_state' drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:227: warning: Excess function parameter 'enable' description in 'mdp5_ctl_set_encoder_state' drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:529: warning: Function parameter or member 'ctl' not described in 'mdp5_ctl_commit' drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:529: warning: Function parameter or member 'pipeline' not described in 'mdp5_ctl_commit' drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:529: warning: Function parameter or member 'flush_mask' not described in 'mdp5_ctl_commit' drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:529: warning: Function parameter or member 'start' not described in 'mdp5_ctl_commit' Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2020-11-24drm/msm/disp/dpu1/dpu_encoder: Remove a bunch of unused variablesLee Jones1-10/+2
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function ‘dpu_encoder_virt_mode_set’: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:981:31: warning: variable ‘num_dspp’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:976:30: warning: variable ‘topology’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function ‘_dpu_encoder_virt_enable_helper’: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1099:26: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function ‘dpu_encoder_virt_disable’: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1210:18: warning: variable ‘dpu_kms’ set but not used [-Wunused-but-set-variable] Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-24drm/msm/disp/dpu1/dpu_core_perf: Remove set but unused variable 'dpu_cstate'Lee Jones1-3/+0
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c: In function ‘_dpu_core_perf_calc_crtc’: drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:113:25: warning: variable ‘dpu_cstate’ set but not used [-Wunused-but-set-variable] Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Kalyan Thota <kalyan_t@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-24drm/msm/disp/mdp5/mdp5_kms: Make local functions 'mdp5_{en, dis}able()' staticLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c:299:5: warning: no previous prototype for ‘mdp5_disable’ [-Wmissing-prototypes] drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c:319:5: warning: no previous prototype for ‘mdp5_enable’ [-Wmissing-prototypes] Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-24drm/msm/disp/mdp5/mdp5_crtc: Make local function ↵Lee Jones1-3/+3
'mdp5_crtc_setup_pipeline()' static Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:581:5: warning: no previous prototype for ‘mdp5_crtc_setup_pipeline’ [-Wmissing-prototypes] Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-05drm/msm/gem: Move prototypes to msm_gem.hRob Clark2-0/+2
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: fix clock scaling on non-sc7180 boardDmitry Baryshkov1-3/+3
c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") has added support for handling bandwidth voting in kms path in addition to old mdss path. However this broke all other platforms since _dpu_core_perf_crtc_update_bus() will now error out instead of properly calculating bandwidth and core clocks. Fix _dpu_core_perf_crtc_update_bus() to just skip bandwidth setting instead of returning an error in case kms->num_paths == 0 (MDSS is used for bandwidth management). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: enable merge_3d support on sm8150/sm8250Dmitry Baryshkov3-0/+14
Handle new merge_3d block setup in dpu encoder code. Pass correct mode and id. Note, that merge_3d blocks are not handled via usual RM reservation mechanism, as each merge_3d block is tied to two PPs, so by reserving PP you get merge_3d automatically. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: setup merge modes in merge_3d blockDmitry Baryshkov2-0/+25
Handle setting up merge mode in merge_3d hardware block. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: handle merge_3d configuration in hw_ctl blockDmitry Baryshkov2-0/+28
Active HW CTL blocks need separate handling for merge_3d flushes. Implement necessary merge_3d configuration and flushing. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: initial support for merge3D hardware blockDmitry Baryshkov7-14/+230
Add initial support for merge3D hardware block on SM8[12]50. Merge3D is reposible for merging contents of two LMs (two PPs) into single interface. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: simplify interface flush handlingDmitry Baryshkov4-68/+23
Instead of calling 4 callbacks to set pending masks, call just one to update both pending_flush_mask and pending_intf_flush mask. Note, that CMD mode support incorrectly did not update pending_intf_flush mask, breaking CMD support on SC7180/SM8x50. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: Add newline to printksStephen Boyd1-2/+2
Printk messages need newlines. Add it here. Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Add missing struct identifierTian Tao1-3/+4
fix warnings reported by make W=1 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:195: warning: cannot understand function prototype: 'const struct dpu_intr_reg dpu_intr_set[] = ' drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:252: warning: cannot understand function prototype: 'const struct dpu_irq_type dpu_irq_map[] = ' Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-02drm/atomic: Pass the full state to CRTC atomic begin and flushMaxime Ripard3-6/+6
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_begin and atomic_flush. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_begin(crtc, old_crtc_state); + FUNCS->atomic_begin(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_flush(crtc, old_crtc_state); + FUNCS->atomic_flush(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_begin(crtc, crtc_state); + FUNCS->atomic_begin(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_flush(crtc, crtc_state); + FUNCS->atomic_flush(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech
2020-11-02drm/atomic: Pass the full state to CRTC atomic_checkMaxime Ripard3-16/+22
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_check. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier ret, f; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <... - ret = FUNCS->atomic_check(crtc, crtc_state); + ret = FUNCS->atomic_check(crtc, state); ...> } @@ identifier crtc, new_state; @@ struct drm_crtc_helper_funcs { ... - int (*atomic_check)(struct drm_crtc *crtc, struct drm_crtc_state *new_state); + int (*atomic_check)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ static struct drm_crtc_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @ ignores_new_state @ identifier crtc_atomic_func.func; identifier crtc, new_state; @@ int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state) { ... when != new_state } @ adds_new_state depends on crtc_atomic_func && !ignores_new_state @ identifier crtc_atomic_func.func; identifier crtc, new_state; @@ int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state) { + struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ int func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ int func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier new_state; identifier crtc; @@ int func(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ) { ... } @@ identifier new_state; identifier crtc; @@ int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @@ identifier new_state; identifier crtc; @@ int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ); @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-1-maxime@cerno.tech
2020-11-02Merge drm/drm-next into drm-misc-nextMaxime Ripard17-397/+386
Daniel needs -rc2 in drm-misc-next to merge some patches Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-11-01drm/msm: Unconditionally call dev_pm_opp_of_remove_table()Viresh Kumar2-10/+5
dev_pm_opp_of_remove_table() doesn't report any errors when it fails to find the OPP table with error -ENODEV (i.e. OPP table not present for the device). And we can call dev_pm_opp_of_remove_table() unconditionally here. While at it, also create a label to put clkname. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-01drm/msm/kms: Update msm_kms_init/destroyRob Clark4-7/+29
Add msm_kms_destroy() and add err return from msm_kms_init(). Prep work for next patch. Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-10-09drm/atomic: Pass the full state to CRTC atomic enable/disableMaxime Ripard3-6/+9
If the CRTC driver ever needs to access the full DRM state, it can't do so at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state will have cleared the pointer from the struct drm_crtc_state to the struct drm_atomic_state before calling those hooks. In order to allow that, let's pass the full DRM state to atomic_enable and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_disable(crtc, crtc_state); + FUNCS->atomic_disable(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_enable(crtc, crtc_state); + FUNCS->atomic_enable(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_enable = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech
2020-09-29Merge tag 'drm-msm-next-2020-09-27' of ↵Dave Airlie17-397/+386
https://gitlab.freedesktop.org/drm/msm into drm-next * DSI support for sm8150/sm8250 * Support for per-process GPU pagetables (finally!) for a6xx. There are still some iommu/arm-smmu changes required to enable, without which it will fallback to the current single pgtable state. The first part (ie. what doesn't depend on drm side patches) is queued up for v5.10[1]. * DisplayPort support. Userspace DP compliance tool support is already merged in IGT[2] * The usual assortment of smaller fixes/cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvqjuzH=Po_9EzzFsp2Xq3tqJUTKfsA2g09XY7_+6Ypfw@mail.gmail.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-01 07:50:01 +0300