Age | Commit message (Collapse) | Author | Files | Lines |
|
This reverts commit 250aa22920cd5d956a5d3e9c6a43d671c2bae217.
The DMA-fence annotations cause a lockdep warning (see below). As per
https://patchwork.freedesktop.org/patch/462170/ it sounds like the
annotations don't work correctly.
======================================================
WARNING: possible circular locking dependency detected
6.5.0-rc2+ #2 Not tainted
------------------------------------------------------
kmstest/219 is trying to acquire lock:
c4705838 (&hdmi->lock){+.+.}-{3:3}, at: hdmi5_bridge_mode_set+0x1c/0x50
but task is already holding lock:
c11e1128 (dma_fence_map){++++}-{0:0}, at: omap_atomic_commit_tail+0x14/0xbc
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (dma_fence_map){++++}-{0:0}:
__dma_fence_might_wait+0x48/0xb4
dma_resv_lockdep+0x1b8/0x2bc
do_one_initcall+0x68/0x3b0
kernel_init_freeable+0x260/0x34c
kernel_init+0x14/0x140
ret_from_fork+0x14/0x28
-> #1 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x70/0xa8
__kmem_cache_alloc_node+0x3c/0x368
kmalloc_trace+0x28/0x58
_drm_do_get_edid+0x7c/0x35c
hdmi5_bridge_get_edid+0xc8/0x1ac
drm_bridge_connector_get_modes+0x64/0xc0
drm_helper_probe_single_connector_modes+0x170/0x528
drm_client_modeset_probe+0x208/0x1334
__drm_fb_helper_initial_config_and_unlock+0x30/0x548
omap_fbdev_client_hotplug+0x3c/0x6c
drm_client_register+0x58/0x94
pdev_probe+0x544/0x6b0
platform_probe+0x58/0xbc
really_probe+0xd8/0x3fc
__driver_probe_device+0x94/0x1f4
driver_probe_device+0x2c/0xc4
__device_attach_driver+0xa4/0x11c
bus_for_each_drv+0x84/0xdc
__device_attach+0xac/0x20c
bus_probe_device+0x8c/0x90
device_add+0x588/0x7e0
platform_device_add+0x110/0x24c
platform_device_register_full+0x108/0x15c
dss_bind+0x90/0xc0
try_to_bring_up_aggregate_device+0x1e0/0x2c8
__component_add+0xa4/0x174
hdmi5_probe+0x1c8/0x270
platform_probe+0x58/0xbc
really_probe+0xd8/0x3fc
__driver_probe_device+0x94/0x1f4
driver_probe_device+0x2c/0xc4
__device_attach_driver+0xa4/0x11c
bus_for_each_drv+0x84/0xdc
__device_attach+0xac/0x20c
bus_probe_device+0x8c/0x90
deferred_probe_work_func+0x8c/0xd8
process_one_work+0x2ac/0x6e4
worker_thread+0x30/0x4ec
kthread+0x100/0x124
ret_from_fork+0x14/0x28
-> #0 (&hdmi->lock){+.+.}-{3:3}:
__lock_acquire+0x145c/0x29cc
lock_acquire.part.0+0xb4/0x258
__mutex_lock+0x90/0x950
mutex_lock_nested+0x1c/0x24
hdmi5_bridge_mode_set+0x1c/0x50
drm_bridge_chain_mode_set+0x48/0x5c
crtc_set_mode+0x188/0x1d0
omap_atomic_commit_tail+0x2c/0xbc
commit_tail+0x9c/0x188
drm_atomic_helper_commit+0x158/0x18c
drm_atomic_commit+0xa4/0xe8
drm_mode_atomic_ioctl+0x9a4/0xc38
drm_ioctl+0x210/0x4a8
sys_ioctl+0x138/0xf00
ret_fast_syscall+0x0/0x1c
other info that might help us debug this:
Chain exists of:
&hdmi->lock --> fs_reclaim --> dma_fence_map
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(dma_fence_map);
lock(fs_reclaim);
lock(dma_fence_map);
lock(&hdmi->lock);
*** DEADLOCK ***
3 locks held by kmstest/219:
#0: f1011de4 (crtc_ww_class_acquire){+.+.}-{0:0}, at: drm_mode_atomic_ioctl+0xf0/0xc38
#1: c47059c8 (crtc_ww_class_mutex){+.+.}-{3:3}, at: modeset_lock+0xf8/0x230
#2: c11e1128 (dma_fence_map){++++}-{0:0}, at: omap_atomic_commit_tail+0x14/0xbc
stack backtrace:
CPU: 1 PID: 219 Comm: kmstest Not tainted 6.5.0-rc2+ #2
Hardware name: Generic DRA74X (Flattened Device Tree)
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from check_noncircular+0x164/0x198
check_noncircular from __lock_acquire+0x145c/0x29cc
__lock_acquire from lock_acquire.part.0+0xb4/0x258
lock_acquire.part.0 from __mutex_lock+0x90/0x950
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from hdmi5_bridge_mode_set+0x1c/0x50
hdmi5_bridge_mode_set from drm_bridge_chain_mode_set+0x48/0x5c
drm_bridge_chain_mode_set from crtc_set_mode+0x188/0x1d0
crtc_set_mode from omap_atomic_commit_tail+0x2c/0xbc
omap_atomic_commit_tail from commit_tail+0x9c/0x188
commit_tail from drm_atomic_helper_commit+0x158/0x18c
drm_atomic_helper_commit from drm_atomic_commit+0xa4/0xe8
drm_atomic_commit from drm_mode_atomic_ioctl+0x9a4/0xc38
drm_mode_atomic_ioctl from drm_ioctl+0x210/0x4a8
drm_ioctl from sys_ioctl+0x138/0xf00
sys_ioctl from ret_fast_syscall+0x0/0x1c
Exception stack(0xf1011fa8 to 0xf1011ff0)
1fa0: 00466d58 be9ab510 00000003 c03864bc be9ab510 be9ab4e0
1fc0: 00466d58 be9ab510 c03864bc 00000036 00466ef0 00466fc0 00467020 00466f20
1fe0: b6bc7ef4 be9ab4d0 b6bbbb00 b6cb2cc0
Fixes: 250aa22920cd ("drm/omapdrm: Annotate dma-fence critical section in commit path")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920-dma-fence-annotation-revert-v1-2-7ebf6f7f5bf6@ideasonboard.com
|
|
Based on grepping through the source code these drivers appear to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.
All of the drivers in this patch were fairly straightforward to fix
since they already had a call to drm_atomic_helper_shutdown() at
remove/unbind time but were just lacking one at system shutdown. The
only hitch is that some of these drivers use the component model to
register/unregister their DRM devices. The shutdown callback is part
of the original device. The typical solution here, based on how other
DRM drivers do this, is to keep track of whether the device is bound
based on drvdata. In most cases the drvdata is the drm_device, so we
can just make sure it is NULL when the device is not bound. In some
drivers, this required minor code changes. To make things simpler,
drm_atomic_helper_shutdown() has been modified to consider a NULL
drm_device as a noop in the patch ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop").
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.2.I9115e5d094a43e687978b0699cc1fe9f2a3452ea@changeid
|
|
Change the infix for fbdev's DMA-memory helpers from _DMA_ to
_DMAMEM_. The helpers perform operations within DMA-able memory,
but they don't perform DMA operations. Naming should make this
clear. Adapt all users. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-4-tzimmermann@suse.de
|
|
Mark the framebuffer with FBINFO_VIRTFB. The framebuffer range is
in DMA-able memory and should be accessed with the CPU's regular
memory ops.
v2:
* drop FBINFO_DEFAULT
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-11-tzimmermann@suse.de
|
|
The fbdev emulation currently uses fbdev's default mmap code, which
has been written for I/O memory. Provide an mmap that uses GEM's mmap
infrastructure.
Utilize fine-grained fbdev macros to initialize struct fb_ops. The
macros set the read/write and the draw callbacks for DMA memory. Set
the fb_mmap callback to omapdrm's new mmap helper. Also select the
correct Kconfig token for fbdev's DMA helpers. Note that the DMA
helpers are the same as for system memory.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-10-tzimmermann@suse.de
|
|
Use the mmap callback in struct drm_gem_object_funcs to set the
VM flags. Replace a number of mmap helpers in omapdrm with their
GEM helper counterparts. Generate DRM's file-operations instance
with GEM's DEFINE_DRM_GEM_FOPS.
The omapdrm driver uses DRM's drm_gem_mmap() helper to prepare
the VMA structure. It then modifies the resulting VMA state in
its own helper omap_gem_mmap_obj(). The patch improves this by
setting up the VMA in the mmap callback in drm_gem_object_funcs,
which is called from within drm_gem_mmap().
Omapdrm's omap_gem_mmap() and omap_gem_mmap() can then be removed
from the driver. A call to drm_gem_mmap() is sufficient for the
mmap operation.
Finally, with the omap functions gone, the drivers file_ops in
omapdriver_fops can be generated with DEFINE_DRM_GEM_FOPS, which
sets DRM's default helpers.
v2:
* detailed commit message (Javier)
* do not set VM_PFNMAP
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-9-tzimmermann@suse.de
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
|
|
Generate a hotplug event after registering a client to allow the
client to configure its display. Remove the hotplug calls from the
existing clients for fbdev emulation. This change fixes a concurrency
bug between registering a client and receiving events from the DRM
core. The bug is present in the fbdev emulation of all drivers.
The fbdev emulation currently generates a hotplug event before
registering the client to the device. For each new output, the DRM
core sends an additional hotplug event to each registered client.
If the DRM core detects first output between sending the artificial
hotplug and registering the device, the output's hotplug event gets
lost. If this is the first output, the fbdev console display remains
dark. This has been observed with amdgpu and fbdev-generic.
Fix this by adding hotplug generation directly to the client's
register helper drm_client_register(). Registering the client and
receiving events are serialized by struct drm_device.clientlist_mutex.
So an output is either configured by the initial hotplug event, or
the client has already been registered.
The bug was originally added in commit 6e3f17ee73f7 ("drm/fb-helper:
generic: Call drm_client_add() after setup is done"), in which adding
a client and receiving a hotplug event switched order. It was hidden,
as most hardware and drivers have at least on static output configured.
Other drivers didn't use the internal DRM client or still had struct
drm_mode_config_funcs.output_poll_changed set. That callback handled
hotplug events as well. After not setting the callback in amdgpu in
commit 0e3172bac3f4 ("drm/amdgpu: Don't set struct
drm_driver.output_poll_changed"), amdgpu did not show a framebuffer
console if output events got lost. The bug got copy-pasted from
fbdev-generic into the other fbdev emulation.
Reported-by: Moritz Duge <MoritzDuge@kolahilft.de>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649
Fixes: 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done")
Fixes: 8ab59da26bc0 ("drm/fb-helper: Move generic fbdev emulation into separate source file")
Fixes: b79fe9abd58b ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers")
Fixes: 63c381552f69 ("drm/armada: Implement fbdev emulation as in-kernel client")
Fixes: 49953b70e7d3 ("drm/exynos: Implement fbdev emulation as in-kernel client")
Fixes: 8f1aaccb04b7 ("drm/gma500: Implement client-based fbdev emulation")
Fixes: 940b869c2f2f ("drm/msm: Implement fbdev emulation as in-kernel client")
Fixes: 9e69bcd88e45 ("drm/omapdrm: Implement fbdev emulation as in-kernel client")
Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation")
Fixes: 71ec16f45ef8 ("drm/tegra: Implement fbdev emulation as in-kernel client")
Fixes: 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Moritz Duge <MoritzDuge@kolahilft.de>
Tested-by: Torsten Krah <krah.tm@gmail.com>
Tested-by: Paul Schyska <pschyska@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de
|
|
Clear all assignments of struct drm_driver's fd/handle callbacks to
drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd(). These
functions are called by default. Add a TODO item to convert vmwgfx
to the defaults as well.
v2:
* remove TODO item (Zack)
* also update amdgpu's amdgpu_partition_driver
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> # qaic
Link: https://patchwork.freedesktop.org/patch/msgid/20230620080252.16368-3-tzimmermann@suse.de
|
|
Don't assert held dma-buf reservation lock on memory mapping of exported
buffer.
We're going to change dma-buf mmap() locking policy such that exporters
will have to handle the lock. The previous locking policy caused deadlock
problem for DRM drivers in a case of self-imported dma-bufs once these
drivers are moved to use reservation lock universally. The problem is
solved by moving the lock down to exporters. This patch prepares DRM
drivers for the locking policy update.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-2-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-3-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-4-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-2-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-3-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-4-dmitry.osipenko@collabora.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the omap drm driver from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-35-u.kleine-koenig@pengutronix.de
|
|
Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Omapdrm does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.
By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.
v4:
* use initializer macros for struct fb_ops
v2:
* use FB_SYS_HELPERS option
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tomi Valkeinen <tomba@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-9-tzimmermann@suse.de
|
|
Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display. The DRM core
calls both, the old callbacks and the new client helpers, from
the same places. The new functions perform the same operation as
before, so there's no change in functionality.
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to omapdrm_fbdev_setup() after omapdrm has registered
its DRM device. As in most drivers, omapdrm's fbdev emulation now
acts like a regular DRM client.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_dev_unregister() releases the client automatically.
No further action is required within omapdrm. If the fbdev
framebuffer has been fully set up, struct fb_ops.fb_destroy
implements the release. For partially initialized emulation, the
fbdev client reverts the initial setup.
v2:
* init drm_client in this patch (Tomi)
* don't handle non-atomic modesetting (Tomi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403104035.15288-6-tzimmermann@suse.de
|
|
The DRM device stores a pointer to the fbdev helper. Remove struct
omap_drm_private.fbdev, which contains the same value. No functional
changes.
v2:
* don't clear dev->fb_helper unnecessarily (Tomi)
* include omap_fbdev.h in omap_fbdev.c (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403104035.15288-5-tzimmermann@suse.de
|
|
Fbdev's framebuffer stores a pointer to the GEM object. Remove
struct omap_fbdev.bo, which contains the same value. No functional
changes.
v2:
* fix commit message (Tomi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403104035.15288-4-tzimmermann@suse.de
|
|
Fbdev's struct fb_helper stores a pointer to the framebuffer. Remove
struct omap_fbdev.fb, which contains the same value. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403104035.15288-3-tzimmermann@suse.de
|
|
Include <linux/of.h> to get the contained declarations. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403104035.15288-2-tzimmermann@suse.de
|
|
Some of these dependencies used to be sensible when only a small part of
the platforms supported by ARCH=arm could be compiled together in a
single kernel image. Nowadays ARCH_MULTIPLATFORM is only used as a guard
for kernel options incompatible with a multiplatform image. See commit
84fc86360623 ("ARM: make ARCH_MULTIPLATFORM user-visible") for some more
details.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221209220555.3631364-1-u.kleine-koenig@pengutronix.de
|
|
Pull drm fixes from Dave Airlie:
"fbdev:
- fix uninit var in error path
shmem:
- revert unGPLing an export
i915:
- Don't use stolen memory or BAR mappings for ring buffers with LLC
- Add inverted backlight quirk for HP 14-r206nv
- Fix GSI offset for MCR lookups
- GVT fixes (memleak, debugfs attributes, kconfig, typos)
amdgpu:
- SMU 13 fixes
- Enable TMZ for GC 10.3.6
- Misc display fixes
- Buddy allocator fixes
- GC 11 fixes
- S0ix fix
- INFO IOCTL queries for GC 11
- VCN harvest fixes for SR-IOV
- UMC 8.10 RAS fixes
- Don't restrict bpc to 8
- NBIO 7.5 fix
- Allow freesync on PCon for more devices
amdkfd:
- SDMA fix
- Illegal memory access fix"
* tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm: (45 commits)
drm/amdgpu/vcn: fix compilation issue with legacy gcc
drm/amd/display: Extend Freesync over PCon support for more devices
Revert "drm/amd/display: Do not set DRR on pipe commit"
drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes
drm/amd/display: Ext displays with dock can't recognized after resume
drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini
drm/amdgpu: remove unused variable ring
drm/amd/display: fix dm irq error message in gpu recover
drm/amd: Fix initialization for nbio 7.5.1
drm/amd/display: Don't restrict bpc to 8 bpc
drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable
drm/radeon: Fix eDP for single-display iMac11,2
drm/shmem-helper: Revert accidental non-GPL export
drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init()
drm/amd/pm: downgrade log level upon SMU IF version mismatch
drm/amdgpu: Add ecc info query interface for umc v8_10
drm/amdgpu: Add convert_error_address function for umc v8_10
drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err
drm/amdgpu: change default behavior of bad_page_threshold parameter
drm/amdgpu: exclude duplicate pages from UMC RAS UE count
...
|
|
Clang warns (or errors with CONFIG_WERROR):
../drivers/gpu/drm/omapdrm/omap_fbdev.c:235:6: error: variable 'helper' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (!fbdev)
^~~~~~
../drivers/gpu/drm/omapdrm/omap_fbdev.c:259:26: note: uninitialized use occurs here
drm_fb_helper_unprepare(helper);
^~~~~~
../drivers/gpu/drm/omapdrm/omap_fbdev.c:235:2: note: remove the 'if' if its condition is always false
if (!fbdev)
^~~~~~~~~~~
../drivers/gpu/drm/omapdrm/omap_fbdev.c:228:30: note: initialize the variable 'helper' to silence this warning
struct drm_fb_helper *helper;
^
= NULL
1 error generated.
Return early, as there is nothing for the function to do if memory
cannot be allocated. There is no point in adding another label to just
emit the warning at the end of the function in this case, as memory
allocation failures are already logged.
Fixes: 3fb1f62f80a1 ("drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()")
Link: https://github.com/ClangBuiltLinux/linux/issues/1809
Link: https://lore.kernel.org/oe-kbuild-all/202302250058.fYTe9aTP-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224-omapdrm-wsometimes-uninitialized-v1-1-3fec8906ee3a@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
Move drm_fb_helper_unprepare() from drm_fb_helper_fini() into the
calling fbdev implementation. Avoids a possible stale mutex with
generic fbdev code.
As indicated by its name, drm_fb_helper_prepare() prepares struct
drm_fb_helper before setting up the fbdev support with a call to
drm_fb_helper_init(). In legacy fbdev emulation, this happens next
to each other. If successful, drm_fb_helper_fini() later tear down
the fbdev device and also unprepare via drm_fb_helper_unprepare().
Generic fbdev emulation prepares struct drm_fb_helper immediately
after allocating the instance. It only calls drm_fb_helper_init()
as part of processing a hotplug event. If the hotplug-handling fails,
it runs drm_fb_helper_fini(). This unprepares the fb-helper instance
and the next hotplug event runs on stale data.
Solve this by moving drm_fb_helper_unprepare() from drm_fb_helper_fini()
into the fbdev implementations. Call it right before freeing the
fb-helper instance.
Fixes: 643231b28380 ("drm/fbdev-generic: Minimize hotplug error handling")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216140620.17699-1-tzimmermann@suse.de
|
|
Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.
[akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Initialize the fb-helper's preferred_bpp field early from within
drm_fb_helper_prepare(); instead of the later client hot-plugging
callback. This simplifies the generic fbdev setup function.
No real changes, but all drivers' fbdev code has to be adapted.
v3:
* build with CONFIG_DRM_FBDEV_EMULATION unset (kernel test bot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-7-tzimmermann@suse.de
|
|
Fix doc related warnings seen with W=1: the function names have changed
but the docs have not been changed accordingly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916082206.167427-2-tomi.valkeinen@ideasonboard.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The functionality of drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() is provided automatically by the
drm_kms_poll helpers. Stop calling these functions manually.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102180705.459294-7-dmitry.baryshkov@linaro.org
|
|
dsi_dump_dsi_irqs(), a function used for debugfs prints, has a large
struct in its frame, which can result in:
drivers/gpu/drm/omapdrm/dss/dsi.c:1126:1: warning: the frame size of 1060 bytes is larger than 1024 bytes [-Wframe-larger-than=]
As the performance of the function is of no concern, let's allocate the
struct with kmalloc instead.
Compile-tested only.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916082206.167427-1-tomi.valkeinen@ideasonboard.com
|
|
After commit 64ff18911878, struct csc_coef_rgb2yuv is not used any more
and can be removed as well.
Fixes: 64ff18911878 ("drm/omap: Enable COLOR_ENCODING and COLOR_RANGE properties for planes")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014024810.21675-1-yuancan@huawei.com
|
|
When userspace mmaps dma-buf's fd, the dma-buf reservation lock must be
held. Add locking sanity checks to the dma-buf mmaping callbacks of DRM
drivers to ensure that the locking assumptions won't regress in future.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110201349.351294-3-dmitry.osipenko@collabora.com
|
|
Rename drm_fb_helper_unregister_fbi() to drm_fb_helper_unregister_info()
as part of unifying the naming within fbdev helpers. Adapt drivers. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-15-tzimmermann@suse.de
|
|
Rename drm_fb_helper_alloc_fbi() to drm_fb_helper_alloc_info() as
part of unifying the naming within fbdev helpers. Adapt drivers. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-14-tzimmermann@suse.de
|
|
Rename struct drm_fb_helper.fbdev to info. The current name is
misleading as it overlaps with generic fbdev naming conventions.
Adapt to the usual naming in fbdev drivers by calling the field
'info'. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-13-tzimmermann@suse.de
|
|
The fb_base in struct drm_mode_config has been unused for a long time.
Some drivers set it and some don't leading to a very confusing state
where the variable can't be relied upon, because there's no indication
as to which driver sets it and which doesn't.
The only usage of fb_base is internal to two drivers so instead of trying
to force it into all the drivers to get it into a coherent state
completely remove it.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimemrmann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019024401.394617-1-zack@kde.org
|
|
Prepare OMAP DRM driver to the common dynamic dma-buf locking convention
by starting to use the unlocked versions of dma-buf API functions.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017172229.42269-8-dmitry.osipenko@collabora.com
|
|
From the coccinelle check:
./drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
Error:line 817 is redundant because platform_get_irq() already prints an
error
So,remove the unnecessary print function dev_err()
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220810062738.13554-1-ye.xingchen@zte.com.cn
|
|
In dss_init_ports() and __dss_uninit_ports(), we should call
of_node_put() for the reference returned by of_graph_get_port_by_id()
in fail path or when it is not used anymore.
Fixes: 09bffa6e5192 ("drm: omap: use common OF graph helpers")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220722144348.1306569-1-windhl@126.com
|
|
Fix the following coccicheck warning:
drivers/gpu/drm/omapdrm/dss/dispc.c:2454:21-22: WARNING opportunity for max()
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517050208.121488-1-guozhengkui@vivo.com
|
|
Remove the include statement for drm_plane_helper.h from all the files
that don't need it. Althogh the header file is almost empty, many drivers
include it somewhere.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de
|
|
drm_crtc.h has no need for linux/fb.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching linux/fb.h.
Quite a few placs do currently depend on linux/fb.h or other
headers pulled in by it without actually including any of it
directly. All of those need to be fixed up.
v2: Split the vmwgfx change out
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-3-ville.syrjala@linux.intel.com
|
|
drm_crtc.h has no need for drm_blend.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_blend.h.
Quite a few placs do currently depend on drm_blend.h without
actually including it directly. All of those need to be fixed
up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-4-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.
Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
drm_crtc.h has no need for drm_edid.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_edid.h.
Quite a few placs do currently depend on drm_edid.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up i915 and msm some more
v3: Fix alphabetical ordering (Sam)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Let's start the 5.19 development cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
|
|
On devices with DMM, all allocations are done through either DMM or TILER.
DMM/TILER being a limited resource means that such allocations will start
to fail before actual free memory is exhausted. What is even worse is that
with time DMM/TILER space gets fragmented to the point that even if we have
enough free DMM/TILER space and free memory, allocation fails because there
is no big enough free block in DMM/TILER space.
Such failures can be easily observed with OMAP xorg DDX, for example -
starting few GUI applications (so buffers for their windows are allocated)
and then rotating landscape<->portrait while closing and opening new
windows soon results in allocation failures.
Fix that by mapping buffers through DMM/TILER only when really needed,
like, for scanout buffers.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-4-git-send-email-ivo.g.dimitrov.75@gmail.com
|
|
Currently code allocates non-scanout BOs from SHMEM and those objects are
accessible to userspace by mmap(). However, on devices with no DMM (like
OMAP3), the same objects are not accessible by kernel drivers that want to
render to them as code refuses to export them. In turn this means that on
devices with no DMM, all buffers must be allocated as scanout, otherwise
only CPU can access them. On those devices, scanout buffers are allocated
from CMA, making those allocations highly unreliable.
Fix that by implementing functionality to export SHMEM backed buffers on
devices with no DMM. This makes CMA memory only being used when needed,
instead for every buffer that has to be off-CPU rendered.
Tested on Motorola Droid4 and Nokia N900
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-3-git-send-email-ivo.g.dimitrov.75@gmail.com
|
|
Move tiler related code to its own function.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-2-git-send-email-ivo.g.dimitrov.75@gmail.com
|
|
Fix the following coccicheck warning:
./drivers/gpu/drm/omapdrm/omap_overlay.c:89:22-25: ERROR: r_ovl is NULL
but dereferenced.
Here should be ovl->idx rather than r_ovl->idx.
Fixes: e02b5cc9e898ad ("drm/omap: Add a 'right overlay' to plane state")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220307095612.409090-1-wanjiabing@vivo.com
|
|
The omap KMS driver will call drm_plane_create_color_properties() with
a default encoding and range values of BT601 and Full Range,
respectively.
Since the initial value wasn't carried over in the state, the driver had
to set it again in omap_plane_reset(). However, the helpers have been
adjusted to set it properly at reset, so this is not needed anymore.
Reviewed-by: Tomi Valkeinen <tomba@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-23-maxime@cerno.tech
|
|
The omap KMS driver will call drm_plane_create_zpos_property() with an
init value of the plane index and the plane type.
Since the initial value wasn't carried over in the state, the driver had
to set it again in omap_plane_reset(). However, the helpers have been
adjusted to set it properly at reset, so this is not needed anymore.
Reviewed-by: Tomi Valkeinen <tomba@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-15-maxime@cerno.tech
|