Age | Commit message (Collapse) | Author | Files | Lines |
|
On a dual core group GPUs (such as T628) fragment shading can be
performed over all cores (because a fragment shader job doesn't
need coherency between threads), however vertex shading requires
to be run on the same core group as the tiler (which always lives
in core group 0).
As a first step to support T628 power on only the first core group
(so no jobs are scheduled on the second one). This makes T628 look
like every other Midgard GPU (and throws away up to half the cores).
With this patch panfrost is able to drive T628 (r1p0) GPU on some
armv8 SoCs (in particular BE-M1000). Without the patch rendering
is horribly broken (desktop is completely unusable) and eventually
the GPU locks up (it takes from a few seconds to a couple of
minutes).
Using the second core group requires support in Mesa (and an UABI
change): the userspace should
1) set PANFROST_JD_DOESNT_NEED_COHERENCY_ON_GPU flag to opt-in
to allowing the job to run across all cores.
2) set PANFROST_RUN_ON_SECOND_CORE_GROUP flag to allow compute
jobs to be run on the second core group (at the moment Mesa
does not advertise compute support on anything older than
Mali T760)
But there's little point adding such flags until someone (myself)
steps up to do the Mesa work.
Signed-off-by: Alexey Sheplyakov <asheplyakov@basealt.ru>
Signed-off-by: Vadim V. Vlasov <vadim.vlasov@elpitech.ru>
Tested-by: Alexey Sheplyakov <asheplyakov@basealt.ru>
Co-developed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220115160658.582646-1-asheplyakov@basealt.ru
|
|
Now that we only list features of interest to kernel space, lots of GPUs
have the same feature bits. To cut down on the repetition in the file,
merge feature lists that are identical between similar GPUs.
Note that this leaves some unmerged identical Bifrost feature lists, as
there are more features affecting Bifrost kernel space that we do not
yet handle.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
[Steve: fix typo in commit message]
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220109170920.2921-3-alyssa.rosenzweig@collabora.com
|
|
Early versions of the legacy kernel driver included comprehensive
feature lists for every GPU, even though most of the enumerated features
only matter to userspace. For example, HW_FEATURE_INTERPIPE_REG_ALIASING
was a feature bit indicating that a GPU had "interpipe register
aliasing": arithmetic, load/store, and texture instruction all use
common general-purpose registers. GPUs without this feature bit have
dedicated load/store and texture "registers". Whether a GPU has this
feature or not is irrelevant to the kernel; it only matters in the
userspace compiler's register allocator. It's silly to enumerate it in
kernel space, and the information is understandably unused. To
underscore the point, this feature only makes sense in the context of
the Midgard instruction set. Bifrost never had dedicated load/store or
texture registers, so the feature bit was vacuously set for all Bifrost
hardware, even though this conveys no useful information.
To clean up the feature list, delete feature bits which could not
possibly matter to the kernel, leaving only those which do affect the
register-level operation of the chip.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220109170920.2921-2-alyssa.rosenzweig@collabora.com
|
|
Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[Steve: fix Fixes: line]
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220106030326.2620942-1-jiasheng@iscas.ac.cn
|
|
GEM helper libraries use struct drm_driver.gem_create_object to let
drivers override GEM object allocation. On failure, the call returns
NULL.
Change the semantics to make the calls return a pointer-encoded error.
This aligns the callback with its callers. Fixes the ingenic driver,
which already returns an error pointer.
Also update the callers to handle the involved types more strictly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211130095255.26710-1-tzimmermann@suse.de
|
|
Change all GEM SHMEM object functions that receive a GEM object
of type struct drm_gem_object to expect an object of type
struct drm_gem_shmem_object instead.
This change reduces the number of upcasts from struct drm_gem_object
by moving them into callers. The C compiler can now verify that the
GEM SHMEM functions are called with the correct type.
For consistency, the patch also renames drm_gem_shmem_free_object to
drm_gem_shmem_free. It further updates documentation for a number of
functions.
v3:
* fix docs for drm_gem_shmem_object_free()
v2:
* mention _object_ callbacks in docs (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211108093149.7226-4-tzimmermann@suse.de
|
|
Wrap GEM SHMEM functions for struct drm_gem_object_funcs and update
all callers. This will allow for an update of the public interfaces
of the GEM SHMEM helper library.
v2:
* fix docs for drm_gem_shmem_object_print_info()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211108093149.7226-3-tzimmermann@suse.de
|
|
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210920090522.23784-6-wsa+renesas@sang-engineering.com
|
|
This symbol is not used outside of panfrost_drv.c, so marks it static.
Fix the following sparse warning:
drivers/gpu/drm/panfrost/panfrost_drv.c:641:12: warning: symbol
'mediatek_mt8183_supplies' was not declared. Should it be static?
drivers/gpu/drm/panfrost/panfrost_drv.c:642:12: warning: symbol
'mediatek_mt8183_pm_domains' was not declared. Should it be static?
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1631956414-85412-1-git-send-email-jiapeng.chong@linux.alibaba.com
|
|
It turns out that when locking a region, the region must be a naturally
aligned power of 2. The upshot of this is that if the desired region
crosses a 'large boundary' the region size must be increased
significantly to ensure that the locked region completely covers the
desired region. Previous calculations (including in kbase for the
proprietary driver) failed to take this into account.
Since it's known that the lock region must be naturally aligned we can
compute the required size by looking at the highest bit position which
changes between the start/end of the lock region (subtracting 1 from the
end because the end address is exclusive). The start address is then
aligned based on the size (this is technically unnecessary as the
hardware will ignore these bits, but the spec advises to do this "to
avoid confusion").
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903094957.74560-1-steven.price@arm.com
|
|
Kickstart new drm-misc-next cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831075327.653-1-caihuoqing@baidu.com
|
|
The labels are misleading. Even though they are all prefixed with 'fail_'
the success case also takes that path, and we should definitely not
cleanup the job if it's been queued. While at it, let's rename those
labels so we don't do the same mistake again.
Fixes: 53516280cc38 ("drm/panfrost: use scheduler dependency tracking")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Steven Price <steven.price@arm.com>
Tested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831133556.236984-1-boris.brezillon@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210831133556.236984-1-boris.brezillon@collabora.com
|
|
Just deletes some code that's now more shared.
Note that thanks to the split into drm_sched_job_init/arm we can now
easily pull the _init() part from under the submission lock way ahead
where we're adding the sync file in-fences as dependencies.
v2: Correctly clean up the partially set up job, now that job_init()
and job_arm() are apart (Emma).
v3: Rebased over renamed functions for adding depdencies
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Steven Price <steven.price@arm.com> (v3)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Emma Anholt <emma@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-8-daniel.vetter@ffwll.ch
|
|
Originally a job was only bound to the queue when we pushed this, but
now that's done in drm_sched_job_init, making that parameter entirely
redundant.
Remove it.
The same applies to the context parameter in
lima_sched_context_queue_task, simplify that too.
v2:
Rebase on top of msm adopting drm/sched
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Emma Anholt <emma@anholt.net>
Acked-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Steven Price <steven.price@arm.com> (v1)
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nirmoy Das <nirmoy.das@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chen Li <chenli@uniontech.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Deepak R Varma <mh12gx2825@gmail.com>
Cc: Kevin Wang <kevin1.wang@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: "Marek Olšák" <marek.olsak@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Dennis Li <Dennis.Li@amd.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Melissa Wen <mwen@igalia.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-6-daniel.vetter@ffwll.ch
|
|
This is a very confusingly named function, because not just does it
init an object, it arms it and provides a point of no return for
pushing a job into the scheduler. It would be nice if that's a bit
clearer in the interface.
But the real reason is that I want to push the dependency tracking
helpers into the scheduler code, and that means drm_sched_job_init
must be called a lot earlier, without arming the job.
v2:
- don't change .gitignore (Steven)
- don't forget v3d (Emma)
v3: Emma noticed that I leak the memory allocated in
drm_sched_job_init if we bail out before the point of no return in
subsequent driver patches. To be able to fix this change
drm_sched_job_cleanup() so it can handle being called both before and
after drm_sched_job_arm().
Also improve the kerneldoc for this.
v4:
- Fix the drm_sched_job_cleanup logic, I inverted the booleans, as
usual (Melissa)
- Christian pointed out that drm_sched_entity_select_rq() also needs
to be moved into drm_sched_job_arm, which made me realize that the
job->id definitely needs to be moved too.
Shuffle things to fit between job_init and job_arm.
v5:
Reshuffle the split between init/arm once more, amdgpu abuses
drm_sched.ready to signal gpu reset failures. Also document this
somewhat. (Christian)
v6:
Rebase on top of the msm drm/sched support. Note that the
drm_sched_job_init() call is completely misplaced, and hence also the
split-out drm_sched_entity_push_job(). I've put in a FIXME which the next
patch will address.
v7: Drop the FIXME in msm, after discussions with Rob I agree it shouldn't
be a problem where it is now.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Emma Anholt <emma@anholt.net>
Acked-by: Steven Price <steven.price@arm.com> (v2)
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> (v5)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Nirmoy Das <nirmoy.das@amd.com>
Cc: Deepak R Varma <mh12gx2825@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Kevin Wang <kevin1.wang@amd.com>
Cc: Chen Li <chenli@uniontech.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: "Marek Olšák" <marek.olsak@amd.com>
Cc: Dennis Li <Dennis.Li@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Sonny Jiang <sonny.jiang@amd.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Emma Anholt <emma@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210817084917.3555822-1-daniel.vetter@ffwll.ch
|
|
Use upper_32_bits/lower_32_bits helpers instead of open-coding them.
This is easier to scan quickly compared to bitwise manipulation, and it
is pleasingly symmetric. I noticed this when debugging lock_region,
which had a particularly "creative" way of writing upper_32_bits.
v2: Use helpers for one more call site and add review tag (Steven).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org> (v1)
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210825153348.4980-1-alyssa.rosenzweig@collabora.com
|
|
When locking a region, we currently clamp to a PAGE_SIZE as the minimum
lock region. While this is valid for Midgard, it is invalid for Bifrost,
where the minimum locking size is 8x larger than the 4k page size. Add a
hardware definition for the minimum lock region size (corresponding to
KBASE_LOCK_REGION_MIN_SIZE_LOG2 in kbase) and respect it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-4-alyssa.rosenzweig@collabora.com
|
|
Mali virtual addresses are 48-bit. Use a u64 instead of size_t to ensure
we can express the "lock everything" condition as ~0ULL without
overflow. This code was silently broken on any platform where a size_t
is less than 48-bits; in particular, it was broken on 32-bit armv7
platforms which remain in use with panfrost. (Mainly RK3288)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Suggested-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-3-alyssa.rosenzweig@collabora.com
|
|
In lock_region, simplify the calculation of the region_width parameter.
This field is the size, but encoded as ceil(log2(size)) - 1.
ceil(log2(size)) may be computed directly as fls(size - 1). However, we
want to use the 64-bit versions as the amount to lock can exceed
32-bits.
This avoids undefined (and completely wrong) behaviour when locking all
memory (size ~0). In this case, the old code would "round up" ~0 to the
nearest page, overflowing to 0. Since fls(0) == 0, this would calculate
a region width of 10 + 0 = 10. But then the code would shift by
(region_width - 11) = -1. As shifting by a negative number is undefined,
UBSAN flags the bug. Of course, even if it were defined the behaviour is
wrong, instead of locking all memory almost none would get locked.
The new form of the calculation corrects this special case and avoids
the undefined behaviour.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reported-and-tested-by: Chris Morgan <macromorgan@hotmail.com>
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-2-alyssa.rosenzweig@collabora.com
|
|
Set a condition for the message of "Couldn't set OPP regulators" to not
display if the error code is EPROBE_DEFER. Note that I used an if
statement to capture the condition instead of the dev_err_probe
function because I didn't want to change the DRM_DEV_ERROR usage.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721214830.25690-1-macroalpha82@gmail.com
|
|
The exception_code in register is only 8 bits,So if
fault_status in panfrost_gpu_irq_handler() don't
(& 0xFF),it can't get correct exception reason.
and it's better to show all of the register value
to custom,so it's better fault_status don't (& 0xFF).
Signed-off-by: ChunyouTang <tangchunyou@icubecorp.cn>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708073407.2015-1-tangchunyou@163.com
|
|
Experience has shown that 1ms is sometimes not enough, even when the GPU
is running at its maximum frequency, not to mention that an MMU operation
might take longer if the GPU is running at a lower frequency, which is
likely to be the case if devfreq is active.
Let's pick a significantly bigger timeout value (1ms -> 100ms) to be on
the safe side.
v5:
* New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-17-boris.brezillon@collabora.com
|
|
The hardware has a set of '_NEXT' registers that can hold a second job
while the first is executing. Make use of these registers to enqueue a
second job per slot.
v5:
* Fix a comment in panfrost_job_init()
v3:
* Fix the done/err job dequeuing logic to get a valid active state
* Only enable the second slot on GPUs supporting jobchain disambiguation
* Split interrupt handling in sub-functions
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-16-boris.brezillon@collabora.com
|
|
If the process who submitted these jobs decided to close the FD before
the jobs are done it probably means it doesn't care about the result.
v5:
* Add a panfrost_exception_is_fault() helper and the
DRM_PANFROST_EXCEPTION_MAX_NON_FAULT value
v4:
* Don't disable/restore irqs when taking the job_lock (not needed since
this lock is never taken from an interrupt context)
v3:
* Set fence error to ECANCELED when a TERMINATED exception is received
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-15-boris.brezillon@collabora.com
|
|
If we can recover from a fault without a reset there's no reason to
issue one.
v3:
* Drop the mention of Valhall requiring a reset on JOB_BUS_FAULT
* Set the fence error to -EINVAL instead of having per-exception
error codes
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-14-boris.brezillon@collabora.com
|
|
Things are unlikely to resolve until we reset the GPU. Let's not wait
for other faults/timeout to happen to trigger this reset.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-13-boris.brezillon@collabora.com
|
|
If we don't do that, we have to wait for the job timeout to expire
before the fault jobs gets killed.
v3:
* Make sure the AS is re-enabled when new jobs are submitted to the
context
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-12-boris.brezillon@collabora.com
|
|
This is not yet needed because we let active jobs be killed during by
the reset and we don't really bother making sure they can be restarted.
But once we start adding soft-stop support, controlling when we deal
with the remaining interrrupts and making sure those are handled before
the reset is issued gets tricky if we keep job interrupts active.
Let's prepare for that and mask+flush job IRQs before issuing a reset.
v4:
* Add a comment explaining why we WARN_ON(!job) in the irq handler
* Keep taking the job_lock when evicting stalled jobs
v3:
* New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-11-boris.brezillon@collabora.com
|
|
Now that we can pass our own workqueue to drm_sched_init(), we can use
an ordered workqueue on for both the scheduler timeout tdr and our own
reset work (which we use when the reset is not caused by a fault/timeout
on a specific job, like when we have AS_ACTIVE bit stuck). This
guarantees that the timeout handlers and reset handler can't run
concurrently which drastically simplifies the locking.
v5:
* Don't call cancel_delayed_timeout() in the reset path (those works
are canceled in drm_sched_stop())
v4:
* Actually pass the reset workqueue to drm_sched_init()
* Don't call cancel_work_sync() in panfrost_reset(). It will deadlock
since it might be called from the reset work, which is executing and
cancel_work_sync() will wait for the handler to return. Checking the
reset pending status should avoid spurious resets
v3:
* New patch
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-10-boris.brezillon@collabora.com
|
|
This should avoid switching to interrupt context when the GPU is under
heavy use.
v3:
* Don't take the job_lock in panfrost_job_handle_irq()
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-9-boris.brezillon@collabora.com
|
|
Expose a helper to trigger a GPU reset so we can easily trigger reset
operations outside the job timeout handler.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-8-boris.brezillon@collabora.com
|
|
Do the exception -> string translation using a table. This way we get
rid of those magic numbers and can easily add new fields if we need
to attach extra information to exception types.
v4:
* Don't expose exception type to userspace
* Merge the enum definition and the enum -> string table declaration
in the same patch
v3:
* Drop the error field
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-7-boris.brezillon@collabora.com
|
|
Currently unused. We'll add it back if we need per-GPU definitions.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-6-boris.brezillon@collabora.com
|
|
Exception types will be defined as an enum.
v4:
* Fix typo in the commit message
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-5-boris.brezillon@collabora.com
|
|
If the fence creation fail, we can return the error pointer directly.
The core will update the fence error accordingly.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-4-boris.brezillon@collabora.com
|
|
Mali Midgard/Bifrost GPUs have 3 hardware queues but only a global GPU
reset. This leads to extra complexity when we need to synchronize timeout
works with the reset work. One solution to address that is to have an
ordered workqueue at the driver level that will be used by the different
schedulers to queue their timeout work. Thanks to the serialization
provided by the ordered workqueue we are guaranteed that timeout
handlers are executed sequentially, and can thus easily reset the GPU
from the timeout handler without extra synchronization.
v5:
* Add a new paragraph to the timedout_job() method
v3:
* New patch
v4:
* Actually use the timeout_wq to queue the timeout work
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-3-boris.brezillon@collabora.com
|
|
Jobs can be in-flight when the file descriptor is closed (either because
the process did not terminate properly, or because it didn't wait for
all GPU jobs to be finished), and apparently panfrost_job_close() does
not cancel already running jobs. Let's refcount the MMU context object
so it's lifetime is no longer bound to the FD lifetime and running jobs
can finish properly without generating spurious page faults.
Reported-by: Icecream95 <ixn@keemail.me>
Fixes: 7282f7645d06 ("drm/panfrost: Implement per FD address spaces")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621133907.1683899-2-boris.brezillon@collabora.com
|
|
Currently this has no practial relevance I think because there's not
many who can pull off a setup with panfrost and another gpu in the
same system. But the rules are that if you're setting an exclusive
fence, indicating a gpu write access in the implicit fencing system,
then you need to wait for all fences, not just the previous exclusive
fence.
panfrost against itself has no problem, because it always sets the
exclusive fence (but that's probably something that will need to be
fixed for vulkan and/or multi-engine gpus, or you'll suffer badly).
Also no problem with that against display.
With the prep work done to switch over to the dependency helpers this
is now a oneliner.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-7-daniel.vetter@ffwll.ch
|
|
More consistency and prep work for the next patch.
Aside: I wonder whether we shouldn't just move this entire xarray
business into the scheduler so that not everyone has to reinvent the
same wheels. Cc'ing some scheduler people for this too.
v2: Correctly handle sched_lock since Lucas pointed out it's needed.
v3: Rebase, dma_resv_get_excl_unlocked got renamed
v4: Don't leak job references on failure (Steven).
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-6-daniel.vetter@ffwll.ch
|
|
drm/scheduler requires a lock between _init and _push_job, but the
reservation lock dance doesn't. So shrink the critical section a
notch.
v2: Lucas pointed out how this should really work, I got it all wrong
in v1.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-5-daniel.vetter@ffwll.ch
|
|
panfrost_clk_init()
Fix the missing clk_disable_unprepare() before return
from panfrost_clk_init() in the error handling case.
Fixes: b681af0bc1cc ("drm: panfrost: add optional bus_clock")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608143856.4154766-1-weiyongjun1@huawei.com
|
|
The functions can be called both in _rcu context as well
as while holding the lock.
v2: add some kerneldoc as suggested by Daniel
v3: fix indentation
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602111714.212426-7-christian.koenig@amd.com
|
|
That describes much better what the function is doing here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602111714.212426-6-christian.koenig@amd.com
|
|
The value of the AFBC_FEATURES register is required by userspace to
determine AFBC support on Bifrost. A user on our IRC channel (#panfrost)
reported a workload that raised a fault on one system's Mali G31 but
worked flawlessly with another system's Mali G31. We determined the
cause to be missing AFBC support on one vendor's Mali implementation --
it turns out AFBC is optional on Bifrost!
Whether AFBC is supported or not is exposed in the AFBC_FEATURES
register on Bifrost, which reads back as 0 on Midgard. A zero value
indicates AFBC is fully supported, provided the architecture itself
supports AFBC, allowing backwards-compatibility with Midgard. Bits 0 and
15 indicate that AFBC support is absent for texturing and rendering
respectively.
The user experiencing the fault reports that AFBC_FEATURES reads back
0x10001 on their system, confirming the architectural lack of AFBC.
Userspace needs this parameter to know to disable AFBC on that
chip, and perhaps others.
v2: Fix typo from copy-paste fail.
v3: Bump the UABI version. This commit was cherry-picked from another
series so chalking this up to a rebase fail.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210604130011.3203-1-alyssa.rosenzweig@collabora.com
|
|
Add support for MT8183's G72 Bifrost.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421132841.v13.4.I5f6b04431828ec9c3e41e65f3337cec6a127480d@changeid
|
|
GPUs with more than a single regulator (e.g. G72 on MT8183) will
require platform-specific handling for devfreq, for 2 reasons:
1. The opp core (drivers/opp/core.c:_generic_set_opp_regulator)
does not support multiple regulators, so we'll need custom
handlers.
2. Generally, platforms with 2 regulators have platform-specific
constraints on how the voltages should be set (e.g.
minimum/maximum voltage difference between them), so we
should not just create generic handlers that simply
change the voltages without taking care of those constraints.
Disable devfreq for now on those GPUs.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421132841.v13.3.I3af068abe30c9c85cabc4486385c52e56527a509@changeid
|
|
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511090433.4396-1-thunder.leizhen@huawei.com
|
|
Pull drm updates from Dave Airlie:
"The usual lots of work all over the place.
i915 has gotten some Alderlake work and prelim DG1 code, along with a
major locking rework over the GEM code, and brings back the property
of timing out long running jobs using a watchdog. amdgpu has some
Alderbran support (new GPU), freesync HDMI support along with a lot
other fixes.
Outside of the drm, there is a new printf specifier added which should
have all the correct acks/sobs:
- printk fourcc modifier support added %p4cc
Summary:
core:
- drm_crtc_commit_wait
- atomic plane state helpers reworked for full state
- dma-buf heaps API rework
- edid: rework and improvements for displayid
dp-mst:
- better topology logging
bridge:
- Chipone ICN6211
- Lontium LT8912B
- anx7625 regulator support
panel:
- fix lt9611 4k panels handling
simple-kms:
- add plane state helpers
ttm:
- debugfs support
- removal of unused sysfs
- ignore signaled moved fences
- ioremap buffer according to mem caching
i915:
- Alderlake S enablement
- Conversion to dma_resv_locking
- Bring back watchdog timeout support
- legacy ioctl cleanups
- add GEM TDDO and RFC process
- DG1 LMEM preparation work
- intel_display.c refactoring
- Gen9/TGL PCH combination support
- eDP MSO Support
- multiple PSR instance support
- Link training debug updates
- Disable PSR2 support on JSL/EHL
- DDR5/LPDDR5 support for bw calcs
- LSPCON limited to gen9/10 platforms
- HSW/BDW async flip/VTd corruption workaround
- SAGV watermark fixes
- SNB hard hang on ring resume fix
- Limit imported dma-buf size
- move to use new tasklet API
- refactor KBL/TGL/ADL-S display/gt steppings
- refactoring legacy DP/HDMI, FB plane code out
amdgpu:
- uapi: add ioctl to query video capabilities
- Iniital AMD Freesync HDMI support
- Initial Adebaran support
- 10bpc dithering improvements
- DCN secure display support
- Drop legacy IO BAR requirements
- PCIE/S0ix/RAS/Prime/Reset fixes
- Display ASSR support
- SMU gfx busy queues for RV/PCO
- Initial LTTPR display work
amdkfd:
- MMU notifier fixes
- APU fixes
radeon:
- debugfs cleanps
- fw error handling ifix
- Flexible array cleanups
msm:
- big DSI phy/pll cleanup
- sc7280 initial support
- commong bandwidth scaling path
- shrinker locking contention fixes
- unpin/swap support for GEM objcets
ast:
- cursor plane handling reworked
tegra:
- don't register DP AUX channels before connectors
zynqmp:
- fix OOB struct padding memset
gma500:
- drop ttm and medfield support
exynos:
- request_irq cleanup function
mediatek:
- fine tune line time for EOTp
- MT8192 dpi support
- atomic crtc config updates
- don't support HDMI connector creation
mxsdb:
- imx8mm support
panfrost:
- MMU IRQ handling rework
qxl:
- locking fixes
- resource deallocation changes
sun4i:
- add alpha properties to UI/VI layers
vc4:
- RPi4 CEC support
vmwgfx:
- doc cleanups
arc:
- moved to drm/tiny"
* tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm: (1390 commits)
drm/ttm: Don't count pages in SG BOs against pages_limit
drm/ttm: fix return value check
drm/bridge: lt8912b: fix incorrect handling of of_* return values
drm: bridge: fix LONTIUM use of mipi_dsi_() functions
drm: bridge: fix ANX7625 use of mipi_dsi_() functions
drm/amdgpu: page retire over debugfs mechanism
drm/radeon: Fix a missing check bug in radeon_dp_mst_detect()
drm/amd/display: Fix the Wunused-function warning
drm/radeon/r600: Fix variables that are not used after assignment
drm/amdgpu/smu7: fix CAC setting on TOPAZ
drm/amd/display: Update DCN302 SR Exit Latency
drm/amdgpu: enable ras eeprom on aldebaran
drm/amdgpu: RAS harvest on driver load
drm/amdgpu: add ras aldebaran ras eeprom driver
drm/amd/pm: increase time out value when sending msg to SMU
drm/amdgpu: add DMUB outbox event IRQ source define/complete/debug flag
drm/amd/pm: add the callback to get vbios bootup values for vangogh
drm/radeon: Fix size overflow
drm/amdgpu: Fix size overflow
drm/amdgpu: move mmhub ras_func init to ip specific file
...
|
|
Use resource-managed OPP API to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|