summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/pl111
AgeCommit message (Collapse)AuthorFilesLines
2023-05-16drm/pl111: Fix FB depth on IMPD-1 framebufferLinus Walleij4-12/+12
The last argument to the function drm_fbdev_dma_setup() was changed from desired BPP to desired depth. In our case the desired depth was 15 but BPP was 16, so we specified 16 as BPP and we relied on the FB emulation core to select a format with a suitable depth for the limited bandwidth and end up with e.g. XRGB1555 like in the past: [drm] Initialized pl111 1.0.0 20170317 for c1000000.display on minor 0 drm-clcd-pl111 c1000000.display: [drm] requested bpp 16, scaled depth down to 15 drm-clcd-pl111 c1000000.display: enable IM-PD1 CLCD connectors Console: switching to colour frame buffer device 80x30 drm-clcd-pl111 c1000000.display: [drm] fb0: pl111drmfb frame buffer device However the current code will fail at that: [drm] Initialized pl111 1.0.0 20170317 for c1000000.display on minor 0 drm-clcd-pl111 c1000000.display: [drm] bpp/depth value of 16/16 not supported drm-clcd-pl111 c1000000.display: [drm] No compatible format found drm-clcd-pl111 c1000000.display: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-12) Fix this by passing the desired depth of 15 for the IM/PD-1 display instead of 16 to drm_fbdev_dma_setup(). The desired depth is however in turn used for bandwidth limiting calculations and that was done with a simple / integer division, whereas we now have to modify that to use DIV_ROUND_UP() so that we get DIV_ROUND_UP(15, 2) = 2 not 15/2 = 1. After this the display works again on the Integrator/AP IM/PD-1. Cc: Emma Anholt <emma@anholt.net> Cc: stable@vger.kernel.org Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 37c90d589dc0 ("drm/fb-helper: Fix single-probe color-format selection") Link: https://lore.kernel.org/dri-devel/20230102112927.26565-1-tzimmermann@suse.de/ Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230515092943.1401558-1-linus.walleij@linaro.org
2023-03-14drm/pl111: Use GEM DMA fbdev emulationThomas Zimmermann1-2/+2
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Reported-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/dri-devel/CACRpkdawSQsNqKJkSSoSw3HmMHyNXFUywxkdszpTC-a_uZA+tQ@mail.gmail.com/ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-26-tzimmermann@suse.de
2022-11-05drm/fb-helper: Move generic fbdev emulation into separate source fileThomas Zimmermann1-1/+1
Move the generic fbdev implementation into its own source and header file. Adapt drivers. No functional changes, but some of the internal helpers have been renamed to fit into the drm_fbdev_ naming scheme. v3: * rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h} * rebase onto vmwgfx changes * rebase onto xlnx changes * fix include statements in amdgpu Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
2022-08-11drm:pl111: Add of_node_put() when breaking out of ↵Liang He1-0/+1
for_each_available_child_of_node() The reference 'child' in the iteration of for_each_available_child_of_node() is only escaped out into a local variable which is only used to check its value. So we still need to the of_node_put() when breaking of the for_each_available_child_of_node() which will automatically increase and decrease the refcount. Fixes: ca454bd42dc2 ("drm/pl111: Support the Versatile Express") Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220711131550.361350-1-windhl@126.com
2022-08-03drm/gem: rename GEM CMA helpers to GEM DMA helpersDanilo Krummrich3-6/+6
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-03drm/fb: rename FB CMA helpers to FB DMA helpersDanilo Krummrich1-3/+3
Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "FB CMA", but not "GEM CMA". This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
2022-08-03drm/fb: remove unused includes of drm_fb_cma_helper.hDanilo Krummrich1-1/+0
Quite a lot of drivers include the drm_fb_cma_helper.h header file without actually making use of it's provided API, hence remove those includes. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-2-dakr@redhat.com
2022-07-05drm: Remove linux/media-bus-format.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for linux/media-bus-format.h, so don't include it. Avoids useless rebuilds of the entire universe when touching linux/media-bus-format.h. Quite a few placs do currently depend on linux/media-bus-format.h without actually including it directly. All of those need to be fixed up. v2: Deal with ingenic as well v3: Fix up mxsfb and remaining parts of imx Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-4-ville.syrjala@linux.intel.com
2022-06-24drm/pl111: drop unexpected word "the" in the commentsJiang Jian1-1/+1
there is an unexpected word "the" in the comments that need to be dropped file: drivers/gpu/drm/pl111/pl111_display.c line: 251 * Note that the the ARM hardware's format reader takes 'r' from changed to * Note that the the ARM hardware's format reader takes 'r' from Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220621133107.3752-1-jiangjian@cdjrlc.com
2022-06-20drm: Drop drm_framebuffer.h from drm_crtc.hVille Syrjälä3-0/+4
drm_crtc.h has no need for drm_frambuffer.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_framebuffer.h. Quite a few placs do currently depend on drm_framebuffer.h without actually including it directly. All of those need to be fixed up. v2: Fix up msm some more v2: Deal with ingenic and shmobile as well Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2021-11-30drm: Remove CONFIG_DRM_KMS_CMA_HELPER optionThomas Zimmermann1-1/+0
Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting KMS helpers and CMA will now automatically enable CMA KMS helpers. Some drivers' Kconfig files did not correctly select KMS or CMA helpers. Fix this as part of the change. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211106193509.17472-3-tzimmermann@suse.de
2021-07-31drm/pl111: Remove unused including <linux/version.h>Cai Huoqing2-2/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727052107.659-1-caihuoqing@baidu.com
2021-06-24drm/tiny: drm_gem_simple_display_pipe_prepare_fb is the defaultDaniel Vetter1-1/+0
Goes through all the drivers and deletes the default hook since it's the default now. Acked-by: David Lechner <david@lechnology.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Emma Anholt <emma@anholt.net> Cc: David Lechner <david@lechnology.com> Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-14-daniel.vetter@ffwll.ch
2021-06-04drm/pl111: Actually fix CONFIG_VEXPRESS_CONFIG dependsKees Cook1-1/+2
VEXPRESS_CONFIG needs to either be missing, built-in, or modular when pl111 is modular. Update the Kconfig to reflect the need. Fixes: 4dc7c97d04dc ("drm/pl111: depend on CONFIG_VEXPRESS_CONFIG") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210604014055.4060521-1-keescook@chromium.org
2021-06-03drm/pl111: depend on CONFIG_VEXPRESS_CONFIGKees Cook1-1/+1
Avoid randconfig build failures by requiring VEXPRESS_CONFIG: aarch64-linux-gnu-ld: drivers/gpu/drm/pl111/pl111_versatile.o: in function `pl111_vexpress_clcd_init': pl111_versatile.c:(.text+0x220): undefined reference to `devm_regmap_init_vexpress_config' Fixes: 826fc86b5903 ("drm: pl111: Move VExpress setup into versatile init") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210602215252.695994-4-keescook@chromium.org
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of ↵Dave Airlie1-2/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-02-23drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpersThomas Zimmermann1-2/+2
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting, but currently located next to framebuffer helpers. Move it to GEM atomic helpers, rename it slightly and adopt the drivers. Same for the rsp simple-pipe helper. Compile-tested with x86-64, aarch64 and arm. The patch is fairly large, but there are no functional changes. v3: * remove out-comented line in drm_gem_framebuffer_helper.h (Maxime) v2: * rename to drm_gem_plane_helper_prepare_fb() (Daniel) * add tutorial-style documentation Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
2021-02-23Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-3/+1
Pull ARM updates from Russell King: - Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void amba: Make use of bus_type functions amba: Make the remove callback return void vfio: platform: simplify device removal amba: reorder functions amba: Fix resource leak for drivers without .remove ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions ARM: 9051/1: vdso: remove unneded extra-y addition ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible ARM: 9049/1: locomo: make locomo bus's remove callback return void ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void ARM: 9047/1: smp: remove unused variable ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB ARM: 9042/1: debug: no uncompress debugging while semihosting ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
2021-02-02amba: Make the remove callback return voidUwe Kleine-König1-3/+1
All amba drivers return 0 in their remove callback. Together with the driver core ignoring the return value anyhow, it doesn't make sense to return a value here. Change the remove prototype to return void, which makes it explicit that returning an error value doesn't work as expected. This simplifies changing the core remove callback to return void, too. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Takashi Iwai <tiwai@suse.de> # for sound Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2020-11-30drm/cma-helper: Implement mmap as GEM CMA object functionsThomas Zimmermann1-1/+1
The new GEM object function drm_gem_cma_mmap() sets the VMA flags and offset as in the old implementation and immediately maps in the buffer's memory pages. Changing CMA helpers to use the GEM object function allows for the removal of the special implementations for mmap and gem_prime_mmap callbacks. The regular functions drm_gem_mmap() and drm_gem_prime_mmap() are now used. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201123115646.11004-3-tzimmermann@suse.de
2020-11-17drm/pl111/pl111_debugfs: Make local function 'pl111_debugfs_regs()' staticLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/pl111/pl111_debugfs.c:33:5: warning: no previous prototype for ‘pl111_debugfs_regs’ [-Wmissing-prototypes] Cc: Eric Anholt <eric@anholt.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-24-lee.jones@linaro.org
2020-11-17drm/pl111/pl111_display: Make local function staticLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/pl111/pl111_display.c:356:6: warning: no previous prototype for ‘pl111_display_disable’ [-Wmissing-prototypes] Cc: Eric Anholt <eric@anholt.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-23-lee.jones@linaro.org
2020-11-09drm/cma-helper: Make default object functions the defaultThomas Zimmermann1-1/+0
As GEM object functions are now mandatory, DRM drivers based on CMA helpers either set them in their implementation of gem_create_object, or use the default via drm_gem_cma_create_object_default_funcs(). Simplify this by setting the default CMA object functions for all objects that don't have any functions of their own. Follows the pattern of similar code in SHMEM and VRAM helpers. The function drm_gem_cma_create_object_default_funcs() is redundant and therefore being removed. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201106131632.6796-1-tzimmermann@suse.de
2020-11-06drm/<drivers>: Constify struct drm_driverDaniel Vetter1-1/+1
Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: kernel test robot <lkp@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
2020-09-25drm/pl111: Introduce GEM object functionsThomas Zimmermann1-4/+1
GEM object functions deprecate several similar callback interfaces in struct drm_driver. This patch replaces the per-driver callbacks with per-instance callbacks in pl111. The only exception is gem_prime_mmap, which is non-trivial to convert. v2: * use drm_gem_cma_create_object_default_funcs() (Eric) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-13-tzimmermann@suse.de
2020-07-23drm: pl111: Update documentationLinus Walleij1-15/+5
Remove notes about migrating from the old driver which is retired as all users are now migrated. Update the text to reflect that we support PL110 and PL111 alike. Drop the bullet on memory bandwidth scaling: this has been implemented. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Russell King <linux@armlinux.org.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200720130327.92364-1-linus.walleij@linaro.org
2020-06-30drm: pl111: Absorb the external register headerLinus Walleij5-4/+73
The PL111 DRM driver is now the sole user of the external CLCD registers header file, so let's absorb that into the pl111_drm.h file and save the external include. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-3-linus.walleij@linaro.org
2020-06-30drm: pl111: Credit where credit is dueLinus Walleij1-0/+9
This moves over some of the credit for the development of this driver from the old fbdev driver that I used as reference when getting this in place. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-1-linus.walleij@linaro.org
2020-04-28drm: pl111: Move VExpress setup into versatile initRob Herring4-144/+108
Since the VExpress setup in pl111_vexpress.c is now just a single function call, let's move it into pl111_versatile.c and we can further simplify pl111_versatile_init() by moving the other pieces for VExpress into pl111_vexpress_clcd_init(). Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200409013947.12667-4-robh@kernel.org
2020-04-28drm: pl111: Simplify vexpress initRob Herring3-66/+4
The init VExpress variants currently instantiates a 'muxfpga' driver for the sole purpose of getting a regmap for it. There's no reason to instantiate a driver and doing so just complicates things. The muxfpga driver also isn't unregistered properly on module unload. Let's just simplify all this this by just calling devm_regmap_init_vexpress_config() directly. Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200409013947.12667-3-robh@kernel.org
2020-04-28drm: pl111: Fix module autoloadingRob Herring1-0/+1
Add a missing MODULE_DEVICE_TABLE entry to fix module autoloading. Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200409013947.12667-2-robh@kernel.org
2020-03-26drm/pl111: Drop explicit drm_mode_config_cleanup callDaniel Vetter1-6/+6
It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: This driver gets its devm_ stuff all wrong wrt drm_device and anything hanging off that. Not the only one unfortunately. v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-36-daniel.vetter@ffwll.ch
2020-03-18drm: convert .debugfs_init() hook to return void.Wambui Karuga2-4/+2
As a result of commit 987d65d01356 (drm: debugfs: make drm_debugfs_create_files() never fail) and changes to various debugfs functions in drm/core and across various drivers, there is no need for the drm_driver.debugfs_init() hook to have a return value. Therefore, declare it as void. This also includes refactoring all users of the .debugfs_init() hook to return void across the subsystem. v2: include changes to the hook and drivers that use it in one patch to prevent driver breakage and enable individual successful compilation of this change. References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-18-wambui.karugax@gmail.com
2020-03-18drm/pl111: make pl111_debugfs_init return 0Wambui Karuga1-3/+5
Since 987d65d01356 (drm: debugfs: make drm_debugfs_create_files() never fail) drm_debugfs_create_files() should return void. Therefore, remove its use as the return value in pl111_debugfs_init(), and have the function return 0 directly. v2: have pl111_debugfs_init() return 0 instead of void to avoid build breakage for individual compilation. References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-13-wambui.karugax@gmail.com
2020-02-16drm/pl111: Support Integrator IM-PD1 moduleLinus Walleij1-0/+73
The last in-kernel user of the old framebuffer driver is the IM-PD1 module for the Integrator/AP. Let's implement support for this remaining user so we can migrate the last user over to DRM and delete the old FB driver. On the Integrator/AP the IM-PD1 system controller will exist alongside the common Integrator system controller so make sure to do a special lookup for the IM-PD1 syscon and make it take precedence if found. Tested on the Integrator/AP with the IM-PD1 mounted. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200213124833.35545-1-linus.walleij@linaro.org
2019-12-10drm: get drm_bridge_panel connector via helperSam Ravnborg1-1/+1
The drm_connector created by drm_panel_bridge was accessed via drm_panel.connector. Avoid the detour around drm_panel by providing a simple get method. This avoids direct access to the connector field in drm_panel in the two users. The change is done in preparation for removal of drm_panel.connector. Update pl111 and tve200 to use the new helper. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Eric Anholt <eric@anholt.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-5-sam@ravnborg.org
2019-10-24drm/simple-kms: Standardize arguments for callbacksDaniel Vetter1-2/+2
Passing the wrong type feels icky, everywhere else we use the pipe as the first parameter. Spotted while discussing patches with Thomas Zimmermann. v2: Make xen compile correctly Acked-By: Thomas Zimmermann <tzimmermann@suse.de> (v1) Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Eric Anholt <eric@anholt.net> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: virtualization@lists.linux-foundation.org Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191023101256.20509-1-daniel.vetter@ffwll.ch
2019-09-08drm/bridge: panel: Infer connector type from panel by defaultLaurent Pinchart1-2/+2
The drm panel bridge creates a connector using a connector type explicitly passed by the display controller or bridge driver that instantiates the panel bridge. Now that drm_panel reports its connector type, we can use it to avoid passing an explicit (and often incorrect) connector type to drm_panel_bridge_add() and devm_drm_panel_bridge_add(). Several drivers report incorrect or unknown connector types to userspace. Reporting a different type may result in a breakage. For that reason, rename (devm_)drm_panel_bridge_add() to (devm_)drm_panel_bridge_add_typed(), and add new (devm_)drm_panel_bridge_add() functions that use the panel connector type. Update all callers of (devm_)drm_panel_bridge_add() to the _typed function, they will be converted one by one after testing. The panel drivers have been updated with the following Coccinelle semantic patch, with manual inspection and fixes to indentation. @@ expression bridge; expression dev; expression panel; identifier type; @@ ( -bridge = drm_panel_bridge_add(panel, type); +bridge = drm_panel_bridge_add_typed(panel, type); | -bridge = devm_drm_panel_bridge_add(dev, panel, type); +bridge = devm_drm_panel_bridge_add_typed(dev, panel, type); ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-3-laurent.pinchart@ideasonboard.com
2019-08-09drm/pl111: Support grayscaleLinus Walleij1-2/+27
Migrating the TI nspire calculators to use the PL111 driver for framebuffer requires grayscale support for the elder panel which uses 8bit grayscale only. DRM does not support 8bit grayscale framebuffers in memory, but by defining the bus format to be MEDIA_BUS_FMT_Y8_1X8 we can get the hardware to turn on a grayscaling feature and convert the RGB framebuffer to grayscale for us. Cc: Daniel Tang <dt.tangr@gmail.com> Cc: Fabian Vogt <fabian@ritter-vogt.de> Tested-by: Fabian Vogt <fabian@ritter-vogt.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190805085847.25554-2-linus.walleij@linaro.org
2019-08-05drm/pl111: Fix unused variable warningShaokun Zhang1-1/+0
drivers/gpu/drm/pl111/pl111_display.c: In function ‘pl111_display_init’: drivers/gpu/drm/pl111/pl111_display.c:551:17: warning: unused variable ‘dev’ [-Wunused-variable] struct device *dev = drm->dev; ^ Fixes: d6781e490179 ("drm/pl111: Drop special pads config check") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Eric Anholt <eric@anholt.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1564996456-55677-1-git-send-email-zhangshaokun@hisilicon.com
2019-08-03drm/pl111: Drop special pads config checkLinus Walleij1-16/+0
This drops the check of the surplus "pads" configuration from the device tree that is completely unused in the DRM driver. This was only used to work around limitations in the earlier fbdev driver. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190724134959.2365-2-linus.walleij@linaro.org
2019-07-22Merge v5.3-rc1 into drm-misc-nextMaxime Ripard1-4/+1
Noralf needs some SPI patches in 5.3 to merge some work on tinydrm. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-17drm/pl111: drop use of drmP.hSam Ravnborg7-17/+28
Drop use of the deprecated drmP.h header. Sort includes in blocks while touching the files. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Eric Anholt <eric@anholt.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-4-sam@ravnborg.org
2019-07-16drm/pl111: pl111_vexpress.c: Add of_node_put() before returnNishka Dasgupta1-0/+1
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a break from the middle of the loop there is no put, thus causing a memory leak. Hence add an of_node_put before the break. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190706132742.3250-1-nishkadg.linux@gmail.com
2019-06-21drm/pl111: Drop drm_gem_prime_export/importDaniel Vetter1-2/+0
They're the default. Aside: Would be really nice to switch the others over to drm_gem_object_funcs. Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-25-daniel.vetter@ffwll.ch
2019-06-21drm/prime: Actually remove DRIVER_PRIME everywhereDaniel Vetter1-1/+1
Split out to make the functional changes stick out more. All places where DRIVER_PRIME was used have been removed in previous patches already. v2: amdgpu gained DRIVER_SYNCOBJ_TIMELINE. v3: amdgpu lost DRIVER_SYNCOBJ_TIMELINE. v4: Don't add a space in i915_drv.c (Sam) v5: Add note that previous patches removed all the DRIVER_PRIME users already (Emil). v6: Fixupe ingenic (new driver) while applying. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: amd-gfx@lists.freedesktop.org Cc: etnaviv@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: spice-devel@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20190617153924.414-1-daniel.vetter@ffwll.ch
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443Thomas Gleixner3-19/+3
Based on 1 normalized pattern(s): this program is free software and is provided to you under the terms of the gnu general public license version 2 as published by the free software foundation and any use by you of this program is subject to the terms of such gnu licence extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 13 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.691558990@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>