summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/atombios_dp.c
AgeCommit message (Collapse)AuthorFilesLines
2017-11-01drm/radeon: fix atombios on big endianRoman Kapl1-20/+18
The function for byteswapping the data send to/from atombios was buggy for num_bytes not divisible by four. The function must be aware of the fact that after byte-swapping the u32 units, valid bytes might end up after the num_bytes boundary. This patch was tested on kernel 3.12 and allowed us to sucesfully use DisplayPort on and Radeon SI card. Namely it fixed the link training and EDID readout. The function is patched both in radeon and amd drivers, since the functions and the fixes are identical. Signed-off-by: Roman Kapl <rka@sysgo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2017-10-09drm/radeon/dp: make radeon_dp_get_dp_link_config staticAlex Deucher1-4/+4
It's not used outside this file any longer. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-08drm/radeon: Don't retry 7 times in radeon_dp_dpcd()Lyude1-11/+10
When this code was written, we didn't retry DP aux transactions on any error, which required retrying important transactions like this in individual drivers. Since that's no longer the case, retrying here is not necessary. As well, we retry any aux transaction on any error 32 times. 7 * 32 = 224, which means this loop causes us to retry grabbing the dpcd 224 times. This is definitely far more then we actually need to do. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-12drm/radeon: fix DP mode validationAlex Deucher1-2/+2
Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-03-18Merge branch 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie1-2/+2
into drm-next A few other misc cleanups and bug fixes for 4.6. Highlights: - unify endian handling in powerplay - powerplay fixes - fix a regression in 4.5 on boards with no display connectors - fence cleanups and locking fixes - whitespace cleanups and code refactoring in radeon * 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: (35 commits) drm/amdgpu/gfx7: add MTYPE definition drm/amdgpu: removing BO_VAs shouldn't be interruptible drm/amd/powerplay: show uvd/vce power gate enablement for tonga. drm/amd/powerplay: show uvd/vce power gate info for fiji drm/amdgpu: use sched fence if possible drm/amdgpu: move ib.fence to job.fence drm/amdgpu: give a fence param to ib_free drm/amdgpu: include the right version of gmc header files for iceland drm/radeon: fix indentation. drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ drm/amdgpu: switch back to 32bit hw fences v2 drm/amdgpu: remove amdgpu_fence_is_signaled drm/amdgpu: drop the extra fence range check v2 drm/amdgpu: signal fences directly in amdgpu_fence_process drm/amdgpu: cleanup amdgpu_fence_wait_empty v2 drm/amdgpu: keep all fences in an RCU protected array v2 drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring drm/amdgpu: RCU protected amd_sched_fence_release drm/amdgpu: RCU protected amdgpu_fence_release drm/amdgpu: merge amdgpu_fence_process and _activity ...
2016-03-17drm/radeon: fix indentation.Jérome Glisse1-2/+2
I hate doing this but it hurts my eyes to go over code that does not comply with indentation rules. Only thing that is not only space change is in atom.c all other files are space indentation issues. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-08drm/radeon/dp: add back special handling for NUTMEGAlex Deucher1-4/+16
When I fixed the dp rate selection in: 092c96a8ab9d1bd60ada2ed385cc364ce084180e drm/radeon: fix dp link rate selection (v2) I accidently dropped the special handling for NUTMEG DP bridge chips. They require a fixed link rate. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Ken Moffat <zarniwhoop@ntlworld.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-12-22drm/radeon: fix dp link rate selection (v2)Alex Deucher1-72/+36
Need to properly handle the max link rate in the dpcd. This prevents some cases where 5.4 Ghz is selected when it shouldn't be. v2: simplify logic, add array bounds check Reviewed-by: Tom St Denis <tom.stdenis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-09-08drm/radeon: Handle DP_AUX_I2C_WRITE_STATUS_UPDATEVille Syrjälä1-0/+1
When we get an i2c defer or short ack for i2c-over-aux write we need to switch to WRITE_STATUS_UPDATE to poll for the completion of the original request. Looks like radeon doesn't do anything special with the request type, so hopefully just treating it the same as a i2c write is enough. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-31drm/radeon/atom: Send out the full AUX addressVille Syrjälä1-2/+3
AUX addresses are 20 bits long. Send out the entire address instead of just the low 16 bits. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-06-04Merge tag 'v4.1-rc6' into drm-nextDave Airlie1-9/+11
Linux 4.1-rc6 backmerge 4.1-rc6 as some of the later pull reqs are based on newer bases and I'd prefer to do the fixup myself.
2015-05-26drm/radeon: make dpcd parameters constAlex Deucher1-4/+4
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-05-21drm/radeon: retry dcpd fetchAlex Deucher1-9/+11
Retry the dpcd fetch several times. Some eDP panels fail several times before the fetch is successful. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73530 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-03-19drm/radeon: export max link rate calculationDave Airlie1-2/+2
We need this in the MST code later. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19drm/radeon: program auxch directly (v2)Dave Airlie1-2/+11
The atombios tables have an unfortunate restriction on only being able to write 12 bytes, MST really wants 16-bytes here, and since the hw can do it, we should just write directly to it. This uses a module option to allow for it now, and maybe we should provide the old code as a fallback for a while. v2: (agd5f) - move registers to a proper register header - only enable on DCE5+ - enable by default on DCE5+ - Switch pad to aux mode before using it - reformat instance handling to better match the rest of the driver Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-26drm/radeon: fix atom aux payload size check for writes (v2)Alex Deucher1-0/+7
The atom aux param interface only supports 4 bits for the total write transfer size (header + payload). This limits us to 12 bytes of payload rather than 16. Add a check for this. Reads are not affected. v2: switch to WARN_ON_ONCE Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-13drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessaryAlex Deucher1-3/+1
Don't restrict it to just eDP panels. Some LVDS bridge chips require this. Fixes blank panels on resume on certain laptops. Noticed by mrnuke on IRC. bug: https://bugs.freedesktop.org/show_bug.cgi?id=42960 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-01-05drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hwAlex Deucher1-0/+4
The check was already in place in the dp mode_valid check, but radeon_dp_get_dp_link_clock() never returned the high clock mode_valid was checking for because that function clipped the clock based on the hw capabilities. Add an explicit check in the mode_valid function. bug: https://bugs.freedesktop.org/show_bug.cgi?id=87172 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc:stable@vge.kernel.org
2014-11-12drm/radeon: add locking around atombios scratch space usageDave Airlie1-1/+3
While developing MST support I noticed I often got the wrong data back from a transaction, in a racy fashion. I noticed the scratch space wasn't locked against concurrent users. Based on a patch by Alex, but I've made it a bit more obvious when things are locked. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-09-16Merge tag 'drm-intel-next-2014-09-05' of ↵Dave Airlie1-2/+2
git://anongit.freedesktop.org/drm-intel into drm-next - final bits (again) for the rotation support (Sonika Jindal) - support bl_power in the intel backlight (Jani) - vdd handling improvements from Ville - i830M fixes from Ville - piles of prep work all over to make skl enabling just plug in (Damien, Sonika) - rename DP training defines to reflect latest edp standards, this touches all drm drivers supporting DP (Sonika Jindal) - cache edids during single detect cycle to avoid re-reading it for e.g. audio, from Chris - move w/a for registers which are stored in the hw context to the context init code (Arun&Damien) - edp panel power sequencer fixes, helps chv a lot (Ville) - piles of other chv fixes all over - much more paranoid pageflip handling with stall detection and better recovery from Chris - small things all over, as usual * tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel: (114 commits) drm/i915: Update DRIVER_DATE to 20140905 drm/i915: Decouple the stuck pageflip on modeset drm/i915: Check for a stalled page flip after each vblank drm/i915: Introduce a for_each_plane() macro drm/i915: Rewrite ABS_DIFF() in a safer manner drm/i915: Add comments explaining the vdd on/off functions drm/i915: Move DP port disable to post_disable for pch platforms drm/i915: Enable DP port earlier drm/i915: Turn on panel power before doing aux transfers drm/i915: Be more careful when picking the initial power sequencer pipe drm/i915: Reset power sequencer pipe tracking when disp2d is off drm/i915: Track which port is using which pipe's power sequencer drm/i915: Fix edp vdd locking drm/i915: Reset the HEAD pointer for the ring after writing START drm/i915: Fix unsafe vma iteration in i915_drop_caches drm/i915: init sprites with univeral plane init function drm/i915: Check of !HAS_PCH_SPLIT() in PCH transcoder funcs drm/i915: Use HAS_GMCH_DISPLAY un underrun reporting code drm/i915: Use IS_BROADWELL() instead of IS_GEN8() in forcewake code drm/i915: Don't call gen8_fbc_sw_flush() on chv ...
2014-09-09drm/radeon: reduce memory footprint for debuggingAndy Shevchenko1-5/+2
There is no need to use hex_dump_to_buffer() since we have a kernel helper to dump up to 64 bytes just via printk(). In our case the actual size is 15 bytes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-09-03drm/radeon: Renaming DP training vswing pre emph definesSonika Jindal1-2/+2
Rename the defines to have levels instead of values for vswing and pre-emph levels as the values may differ in other scenarios like low vswing of eDP1.4 where the values are different. Done using following cocci patch for each define: @@ @@ # define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0) + # define DP_TRAIN_VOLTAGE_SWING_LEVEL_3 (0 << 0) ... Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Acked-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-11drm/radeon/dp: return -EIO for flags not zero caseAlex Deucher1-1/+1
If there are error flags in the aux transaction return -EIO rather than -EBUSY. -EIO restarts the whole transaction while -EBUSY jus retries. Fixes problematic aux transfers. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=80684 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-07-01drm/radeon: Use only one line for whole DPCD debug outputStefan Brüns1-5/+7
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-05Merge commit '9e9a928eed8796a0a1aaed7e0b676db86ba84594' into drm-nextDave Airlie1-19/+25
Merge drm-fixes into drm-next. Both i915 and radeon need this done for later patches. Conflicts: drivers/gpu/drm/drm_crtc_helper.c drivers/gpu/drm/i915/i915_drv.h drivers/gpu/drm/i915/i915_gem.c drivers/gpu/drm/i915/i915_gem_execbuffer.c drivers/gpu/drm/i915/i915_gem_gtt.c
2014-06-05drm/dp: add a hw mutex around the transfer functions. (v2)Dave Airlie1-2/+3
This should avoid races between connector probing and HPD irqs in the future, currently mode_config.mutex blocks this possibility. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-02drm/radeon/dp: fix lane/clock setup for dp 1.2 capable devicesAlex Deucher1-2/+15
Only DCE5+ asics support DP 1.2. Noticed by ArtForz on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-06-02drm/radeon: add a i2c bus mutexAlex Deucher1-4/+14
The i2c and aux buses use the same pads so add a mutex to protect access to the pads. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-01drm/radeon/dp: check for errors in dpcd readsAlex Deucher1-19/+25
Check to make sure the transaction succeeded before using the register value. Fixes occasional link training problems. Noticed-by: Sergei Antonov <saproj@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-04-22drm/radeon/aux: fix hpd assignment for aux busAlex Deucher1-0/+1
The hpd (hot plug detect) pin assignment got lost in the conversion to to the common i2c over aux code. Without this information, aux transactions do not work properly. Fixes DP failures. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-04-08drm/radeon/dp: switch to the common i2c over aux codeAlex Deucher1-100/+17
Provides a nice cleanup in radeon. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-04-08drm/radeon/dp: handle zero sized i2c over aux transactions (v2)Alex Deucher1-5/+18
Needed for proper i2c over aux handling for certain monitors and configurations (e.g., dp bridges or adapters). v2: add comments clarifying tx_size setting. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-03-25drm/radeon: use drm_dp_dpcd_read_link_status()Alex Deucher1-25/+5
Replace the radeon specific version with the generic version. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com>
2014-03-25drm/radeon: use the new drm helpers for dp auxAlex Deucher1-104/+88
Switch to the new dp helpers. The main difference is that the DP helpers don't allow an adjustable delay in the aux transaction, but I don't know that this is necessary. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com>
2014-03-25drm/radeon: clarify special handling in i2c over auxAlex Deucher1-20/+16
We need a special packet for the start and end of the transaction. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com>
2014-03-25drm/radeon/dp: move sink power control to a separate functionAlex Deucher1-5/+21
This will be used elsewhere. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com>
2014-03-25drm/radeon/dp: use i2c_get_adapdata rather than castingAlex Deucher1-1/+1
Minor code cleanup. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com>
2014-01-20drm/radeon/dp: sleep after powering up the displayAlex Deucher1-1/+3
According to the DP 1.1 spec, the sink must power up within 1ms. Noticed while reviewing Thierry's drm/dp patches. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-01-20drm/radeon/dp: use usleep_range rather than udelayAlex Deucher1-4/+4
Based on common dp code proposed by Thierry Reding. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-01-20drm/radeon/dp: bump i2c-over-aux retries to 7Alex Deucher1-3/+3
As per the DP1.2 spec. Noticed while reviewing Thierry's drm/dp patches. Also bump native aux retries to 7 for consistency. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-18drm/dp: Use AUX constants from specificationThierry Reding1-17/+19
The current values seem to be defined in a format that's specific to the i915, gma500 and radeon drivers. To make this more generally useful, use the values as defined in the specification. While at it, prefix the constants with DP_ for improved namespacing. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-09drm/radeon/dp: use drm_dp_enhanced_frame_cap()Jani Nikula1-2/+1
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-02Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie1-3/+3
into drm-next Alex writes: This is the radeon drm-next request. Big changes include: - support for dpm on CIK parts - support for ASPM on CIK parts - support for berlin GPUs - major ring handling cleanup - remove the old 3D blit code for bo moves in favor of CP DMA or sDMA - lots of bug fixes [airlied: fix up a bunch of conflicts from drm_order removal] * 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits) drm/radeon/dpm: make sure dc performance level limits are valid (CI) drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2) drm/radeon: gcc fixes for extended dpm tables drm/radeon: gcc fixes for kb/kv dpm drm/radeon: gcc fixes for ci dpm drm/radeon: gcc fixes for si dpm drm/radeon: gcc fixes for ni dpm drm/radeon: gcc fixes for trinity dpm drm/radeon: gcc fixes for sumo dpm drm/radeonn: gcc fixes for rv7xx/eg/btc dpm drm/radeon: gcc fixes for rv6xx dpm drm/radeon: gcc fixes for radeon_atombios.c drm/radeon: enable UVD interrupts on CIK drm/radeon: fix init ordering for r600+ drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume radeon kms: fix uninitialised hotplug work usage in r100_irq_process() drm/radeon/audio: set up the sads on DCE3.2 asics drm/radeon: fix handling of variable sized arrays for router objects ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_gem_dmabuf.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/radeon/cik.c drivers/gpu/drm/radeon/ni.c drivers/gpu/drm/radeon/r600.c
2013-08-31drm/radeon: fix endian bugs in hw i2c atom routinesAlex Deucher1-3/+3
Need to swap the data fetched over i2c properly. This is the same fix as the endian fix for aux channel transactions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-19Merge remote-tracking branch 'pfdo/drm-rcar-for-v3.12' into drm-nextDave Airlie1-4/+39
Merge the rcar stable branch that is being shared with the arm-soc tree. Signed-off-by: Dave Airlie <airlied@redhat.com> * pfdo/drm-rcar-for-v3.12: (220 commits) drm/rcar-du: Add FBDEV emulation support drm/rcar-du: Add internal LVDS encoder support drm/rcar-du: Configure RGB output routing to DPAD0 drm/rcar-du: Rework output routing support drm/rcar-du: Add support for DEFR8 register drm/rcar-du: Add support for multiple groups drm/rcar-du: Fix buffer pitch alignment for R8A7790 DU drm/rcar-du: Add support for the R8A7790 DU drm/rcar-du: Move output routing configuration to group drm/rcar-du: Remove register definitions for the second channel drm/rcar-du: Use dynamic number of CRTCs instead of CRTCs array size drm/rcar-du: Introduce CRTCs groups drm/rcar-du: Rename rcar_du_plane_(init|register) to rcar_du_planes_* drm/rcar-du: Create rcar_du_planes structure drm/rcar-du: Rename platform data fields to match what they describe drm/rcar-du: Merge LVDS and VGA encoder code drm/rcar-du: Split VGA encoder and connector drm/rcar-du: Split LVDS encoder and connector drm/rcar-du: Clarify comment regarding plane Y source coordinate drm/rcar-du: Support per-CRTC clock and IRQ ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/qxl/qxl_release.c
2013-08-07drm: don't push static constants on stack for %*phAndy Shevchenko1-1/+1
There is no need to pass constants via stack. The width may be explicitly specified in the format. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-22drm/radeon: fix endian issues with DP handling (v3)Alex Deucher1-4/+39
The atom interpreter expects data in LE format, so swap the message buffer as apprioriate. v2: properly handle non-dw aligned byte counts. v3: properly handle remainder Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Dong He <hedonghust@gmail.com> Cc: stable@vger.kernel.org
2012-10-23drm: extract drm_dp_max_lane_count helperDaniel Vetter1-6/+1
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-23drm: extract dp link bw helpersDaniel Vetter1-29/+3
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-23drm: extract dp link train delay functions from radeonDaniel Vetter1-17/+10
This requires a few changes since that dpcd value is above the range currently cached by radeon. I've check the dp specs, and above 0xf there's a big gap and nothing that looks like we should cache it while a given device is plugged in. It's also the same value that i915.ko uses. Hence extend the various dpcd arrays in the radeon driver, use proper symbolic constants where applicable (one place overallocated the dpcd array to 25 bytes). Then also drop the rd_interval cache - radeon_dp_link_train_init re-reads the dpcd block, so the values we'll consume in train_cr and train_ce will always be fresh. To avoid needless diff-churn, #define the old size of dpcd as the new one and keep it around. v2: Alex Deucher noticed one place where I've forgotten to replace 8 with DP_RECEIVER_CAP_SIZE. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-27 01:28:18 +0300