summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/r600d.h
AgeCommit message (Collapse)AuthorFilesLines
2013-08-08drm/radeon: fix audio dto calculation on DCE3+ (v3)Alex Deucher1-0/+3
Need to set the wallclock ratio and adjust the phase and module registers appropriately. May fix problems with audio timing at certain display timings. v2: properly handle clocks below 24mhz v3: rebase r600 changes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-14drm/radeon: implement bo copy callback using CP DMA (v2)Alex Deucher1-0/+1
Lighter weight than using the 3D engine. v2: fix ring count Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-28drm/radeon/kms: add dpm support for rv7xx (v4)Alex Deucher1-0/+2
This adds dpm support for rv7xx asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching Set radeon.dpm=1 to enable. v2: reduce stack usage v3: fix 64 bit div v4: fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for rv6xx (v3)Alex Deucher1-0/+13
This adds dpm support for rv6xx asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching Set radeon.dpm=1 to enable. v2: remove duplicate line v3: fix thermal interrupt check noticed by Jerome Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-06-27drm/radeon/kms: add common r600 dpm functionsAlex Deucher1-0/+213
These are shared by rs780/rs880, rv6xx, and newer chips. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: properly set up the RLC on ON/LN/TN (v3)Alex Deucher1-4/+0
This is required for certain advanced functionality. v2: save/restore list takes dword offsets v3: rebase on gpu reset changes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-03drm/radeon: Use direct mapping for fast fb access on RS780/RS880 (v2)Samuel Li1-0/+8
v2: fix trailing whitespace Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-02drm/radeon: consolidate UVD clock programmingChristian König1-0/+4
Instead of duplicating the code over and over again, just use a single function to handle the clock calculations. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-24drm/radeon: fix up audio dto programming for DCE2Alex Deucher1-1/+6
Uses a different register than DCE3 asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09drm/radeon: UVD bringup v8Christian König1-0/+61
Just everything needed to decode videos using UVD. v6: just all the bugfixes and support for R7xx-SI merged in one patch v7: UVD_CGC_GATE is a write only register, lockup detection fix v8: split out VRAM fallback changes, remove support for RV770, add support for HEMLOCK, add buffer sizes checks Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-01drm/radeon: use status regs to determine what to reset (6xx/7xx)Alex Deucher1-0/+2
When we attempt the reset the GPU, look at the status registers to determine what blocks need to be reset. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-01drm/radeon: rework GPU reset on r6xx/r7xxAlex Deucher1-0/+2
Update the code to better match the recommended programming sequence for soft reset. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-01drm/radeon: consolidate redundant macros and constantsIlija Hadzic1-11/+2
After refactoring the _cs logic, we ended up with many macros and constants that #define the same thing. Clean'em up. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-13drm/radeon: add register headers for CP DMA on r6xx-SIAlex Deucher1-0/+32
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-11drm/radeon/kms: Add initial support for async DMA on r6xx/r7xxAlex Deucher1-1/+53
Uses the new multi-ring infrastucture. 6xx/7xx has a single async DMA ring. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700Marek Olšák1-0/+8
Checking of the second colorbuffer was skipped on r700, because CB_TARGET_MASK was 0xf. With r600, CB_TARGET_MASK is changed to 0xff, so we must set the number of samples of the second colorbuffer to 1 in order to pass the CS checker. The DRM version is bumped, because RESOLVE_BOX is always rejected without this fix on r600. Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-20drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700Marek Olšák1-0/+17
MSAA is impossible without them. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-13drm/radeon/kms: implement timestamp userspace query (v2)Marek Olšák1-0/+3
Returns a snapshot of the GPU clock counter. Needed for certain OpenGL extensions. v2: agd5f - address Jerome's comments - add function documentation Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-07-20drm/radeon: improve GPU lockup debugging info on r6xx/r7xx/r8xx/r9xxJerome Glisse1-0/+3
Print various CP register that have valuable informations regarding GPU lockup. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16drm/radeon: add support for STRMOUT_BASE_UPDATE on 7xxAlex Deucher1-0/+1
Required for streamout. Bump drm minor. Marek v2: fix pkt->count check Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16drm/radeon: add some additional 6xx/7xx/EG register initAlex Deucher1-0/+1
- SMX_SAR_CTL0 needs to be programmed correctly to prevent problems with memory exports in certain cases. - VC_ENHANCE needs to be initialized on 6xx/7xx. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/radeon: fixup tiling group size and backendmap on r6xx-r9xx (v4)Alex Deucher1-0/+2
Tiling group size is always 256bits on r6xx/r7xx/r8xx/9xx. Also fix and simplify render backend map. This now properly sets up the backend map on r6xx-9xx which should improve 3D performance. Vadim benchmarked also: Some benchmarks on juniper (5750), fullscreen 1920x1080, first result - kernel 3.4.0+ (fb21affa), second - with these patches: Lightsmark: 91 fps => 123 fps +35% Doom3: 74 fps => 101 fps +36% Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm/radeon/hdmi: store info about all AFMT blocksAlex Deucher1-6/+0
Introduce special struct radeon_afmt for this purpose. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-01drm/radeon/kms/hdmi: use relative offsets, official regsRafał Miłecki1-2/+5
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-24drm/radeon/kms: add register definitions for audioAlex Deucher1-0/+236
This adds register definitions for HDMI/DP audio on DCE2/3/4/5 hardware. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-26drm/radeon/kms: add htile support to the cs checker v3Jerome Glisse1-0/+8
For 6xx+. Required for mesa to use htile support for HiZ/HiS. Userspace will check radeon version 2.14 with is bumped either by tiling patch or stream out patch. This patch only add support for htile relocation which should be enough for any userspace to implement the hyperz (using htile buffer) feature. v2: Jerome: Fix size checking for htile buffer. v3: Jerome: Adapt on top of r600/evergreen cs checker changes, also check htile surface in case only stencil is present. Signed-off-by: Pierre-Eric Pelloux-Prayer <pelloux@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-21drm/radeon/kms: add support for ucode loading on trinity (v2)Alex Deucher1-0/+4
v2: fix check for MC ucode from Tom. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Merge tag 'v3.3-rc7' into drm-core-nextDave Airlie1-0/+1
Merge the fixes so far into core-next, needed to test intel driver. Conflicts: drivers/gpu/drm/i915/intel_ringbuffer.c
2012-03-07drm/radeon: fix a semaphore deadlock on pre cayman asicsChristian König1-0/+1
The out of order execution of semaphore commands on pre cayman asics doesn't work correctly and can cause deadlocks, so turn it off for now. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-13drm/radeon: add support for evergreen/ni tiling informations v11Jerome Glisse1-0/+14
evergreen and northern island gpu needs more informations for 2D tiling than previous r6xx/r7xx. Add field to tiling ioctl to allow userspace to provide those. The v8 cs checking change to track color view on r6xx/r7xx doesn't affect old userspace as old userspace always emited 0 for this register. v2 fix r6xx/r7xx 2D tiling computation v3 fix r6xx/r7xx height align for untiled surface & add support for tile split on evergreen and newer v4 improve tiling debugging output v5 fix tile split code for evergreen and newer v6 set proper tile split for crtc register v7 fix tile split limit value v8 add COLOR_VIEW checking to r6xx/r7xx checker, add evergreen cs checking, update safe reg for r600, evergreen and cayman. Evergreen checking need some work around for stencil alignment issues v9 fix tile split value range, fix compressed texture handling and mipmap calculation, allow evergreen check to be silencious in front of current broken userspace (depth/stencil alignment issue) v10 fix eg 3d texture and compressed texture, fix r600 depth array, fix r600 color view computation, add support for evergreen stencil split v11 more verbose debugging in some case Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-13drm/radeon/kms: add support for streamout v7Marek Olšák1-0/+6
v2: agd5f: add strmout CS checking, copy_dw register checking v3: agd5f: don't use cs_check_reg() for copy_dw checking as it will incorrectly patch the command stream for certain regs. v4: agd5f: add warning if safe reg check fails for copy_dw v5: agd5f: add stricter checking for 6xx/7xx v6: agd5f: add range checking for copy_dw on eg+, add sx_surface_sync to safe reg list for 7xx. v7: agd5f: add stricter checking for eg+ Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm/radeon/kms: add support for semaphores v3Christian König1-0/+2
They are used to sync between rings, while fences sync between a ring and the cpu. v2 Fix radeon_semaphore_driver_fini when no semaphore were allocated. v3 Initialize list early on to avoid issue in case or early error Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms: demystify r600 blit codeIlija Hadzic1-0/+22
some 3d register bits look like magic in r600 blit functions use predefined constants to make it more intuitive what they are Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07drm/radeon/kms: fix typo in IH_CNTL swap bitfieldAlex Deucher1-1/+1
Only affects BE systems. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-02drm/radeon/kms: add missing Evergreen texture formats to the CS parserMarek Olšák1-0/+3
BC6 and BC7 are described in ARB_texture_compression_bptc. No idea what FMT_32_AS_32_32_32_32 is good for. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-14Merge remote branch 'intel/drm-intel-next' of ../drm-next into drm-core-nextDave Airlie1-4/+5
* 'intel/drm-intel-next' of ../drm-next: (755 commits) drm/i915: Only wait on a pending flip if we intend to write to the buffer drm/i915/dp: Sanity check eDP existence drm/i915: Rebind the buffer if its alignment constraints changes with tiling drm/i915: Disable GPU semaphores by default drm/i915: Do not overflow the MMADDR write FIFO Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing" drm/i915: Don't save/restore hardware status page address register drm/i915: don't store the reg value for HWS_PGA drm/i915: fix memory corruption with GM965 and >4GB RAM Linux 2.6.38-rc7 Revert "TPM: Long default timeout fix" drm/i915: Re-enable GPU semaphores for SandyBridge mobile drm/i915: Replace vblank PM QoS with "Interrupt-Based AGPBUSY#" Revert "drm/i915: Use PM QoS to prevent C-State starvation of gen3 GPU" drm/i915: Allow relocation deltas outside of target bo drm/i915: Silence an innocuous compiler warning for an unused variable fs/block_dev.c: fix new kernel-doc warning ACPI: Fix build for CONFIG_NET unset mm: <asm-generic/pgtable.h> must include <linux/mm_types.h> x86: Use u32 instead of long to set reset vector back to 0 ... Conflicts: drivers/gpu/drm/i915/i915_gem.c
2011-02-23drm/radeon: overhaul texture checking. (v3)Dave Airlie1-0/+5
the texture checking code didn't work for block formats like s3tc, this overhauls it to work for all types. v2: add texture array support. v3: add subsampled formats Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: 6xx/7xx big endian fixesCédric Cano1-4/+5
agd5f: minor cleanups Signed-off-by: Cédric Cano <ccano@interfaceconcept.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add support for gen2 pcie link speedsAlex Deucher1-0/+39
Supported on rv6xx/r7xx/evergreen. Cards come up in gen1 mode. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22drm/radeon/kms: add pageflip ioctl support (v3)Alex Deucher1-0/+9
This adds support for dri2 pageflipping. v2: precision updates from Mario Kleiner. v3: Multihead fixes from Mario Kleiner; missing crtc offset add note about update pending bit on pre-avivo chips Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms: fix and unify tiled buffer alignment checking for r6xx/7xxAlex Deucher1-0/+6
Tiled buffers have the same alignment requirements regardless of whether the surface is for db, cb, or textures. Previously, the calculations where inconsistent for each buffer type. - Unify the alignment calculations in a common function - Standardize the alignment units (pixels for pitch/height/depth, bytes for base) - properly check the buffer base alignments Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms/r6xx+: use new style fencing (v3)Alex Deucher1-0/+21
On r6xx+ a newer fence mechanism was implemented to replace the old wait_until plus scratch regs setup. A single EOP event will flush the destination caches, write a fence value, and generate an interrupt. This is the recommended fence mechanism on r6xx+ asics. This requires my previous writeback patch. v2: fix typo that enabled event fence checking on all asics rather than just r6xx+. v3: properly enable EOP interrupts Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=29972 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms/r7xx: add workaround for hw issue with HDP flushAlex Deucher1-0/+1
Use of HDP_*_COHERENCY_FLUSH_CNTL can cause a hang in certain situations. Add workaround. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: add tiling support to the cs checker for r6xx/r7xxAlex Deucher1-0/+6
Check for relocs for DB_DEPTH_INFO, CB_COLOR*_INFO, and texture resources. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: add support for internal thermal sensors (v3)Alex Deucher1-0/+5
rv6xx/rv7xx/evergreen families supported; older asics did not have an internal thermal sensor. Note, not all oems use the internal thermal sensor, so it's only exposed in cases where it is used. Note also, that most laptops use an oem specific ACPI solution for GPU thermal information rather than using the internal thermal sensor directly. v2: export millidegrees celsius, use hwmon device properly. v3: fix Kconfig Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-31drm/radeon/r6xx/r7xx: CS parser fixesAlex Deucher1-0/+49
- Drop some more safe regs taht userspace shouldn't hit - Constant base regs need relocs. This allows us to use constant buffers rather than the constant register file. Also we don't want userspace to be able to set arbitrary mc base values for the const caches. - Track SQ_CONFIG so we know whether userspace is using the cfile or constant buffers. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11drm/radeon/kms: r600/r700 command stream checkerJerome Glisse1-1/+466
This patch add cs checker to r600/r700 hw. Command stream checking will rewrite some of the cs value in order to restrict GPU access to BO size. This doesn't break old userspace but just enforce safe value. It should break any things that was using the r600/r700 cs ioctl to do forbidden things (malicious software), though we are not aware of such things. Here is the list of thing we check : - enforcing resource size - enforcing color buffer slice tile max, will restrict cb access - enforcing db buffer slice tile max, will restrict db access We don't check for shader bigger than the BO in which they are supposed to be, such use would lead to GPU lockup and is harmless from security POV, as far as we can tell (note that even checking for this wouldn't prevent someone to write bogus shader that lead to lockup). This patch has received as much testing as humanly possible with old userspace to check that it didn't break such configuration. However not all the applications out there were tested, thus it might broke some odd, rare applications. [airlied: fix rules for cs checker for parallel builds] Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-21drm/radeon: r6xx/r7xx possible security issue, system ram accessJerome Glisse1-0/+25
This patch workaround a possible security issue which can allow user to abuse drm on r6xx/r7xx hw to access any system ram memory. This patch doesn't break userspace, it detect "valid" old use of CB_COLOR[0-7]_FRAG & CB_COLOR[0-7]_TILE registers and overwritte the address these registers are pointing to with the one of the last color buffer. This workaround will work for old mesa & xf86-video-ati and any old user which did use similar register programming pattern as those (we expect that there is no others user of those ioctl except possibly a malicious one). This patch add a warning if it detects such usage, warning encourage people to update their mesa & xf86-video-ati. New userspace will submit proper relocation. Fix for xf86-video-ati / mesa (this kernel patch is enough to prevent abuse, fix for userspace are to set proper cs stream and avoid kernel warning) : http://cgit.freedesktop.org/xorg/driver/xf86-video-ati/commit/?id=95d63e408cc88b6934bec84a0b1ef94dfe8bee7b http://cgit.freedesktop.org/mesa/mesa/commit/?id=46dc6fd3ed5ef96cda53641a97bc68c3bc104a9f Abusing this register to perform system ram memory is not easy, here is outline on how it could be achieve. First attacker must have access to the drm device and be able to submit command stream throught cs ioctl. Then attacker must build a proper command stream for r6xx/r7xx hw which will abuse the FRAG or TILE buffer to overwrite the GPU GART which is in VRAM. To achieve so attacker as to setup CB_COLOR[0-7]_FRAG or CB_COLOR[0-7]_TILE to point to the GPU GART, then it has to find a way to write predictable value into those buffer (with little cleverness i believe this can be done but this is an hard task). Once attacker have such program it can overwritte GPU GART to program GPU gart to point anywhere in system memory. It then can reusse same method as he used to reprogram GART to overwritte the system ram through the GART mapping. In the process the attacker has to be carefull to not overwritte any sensitive area of the GART table, like ring or IB gart entry as it will more then likely lead to GPU lockup. Bottom line is that i think it's very hard to use this flaw to get system ram access but in theory one can achieve so. Side note: I am not aware of anyone ever using the GPU as an attack vector, nevertheless we take great care in the opensource driver to try to detect and forbid malicious use of GPU. I don't think the closed source driver are as cautious as we are. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-12-08drm/radeon/kms: add regs and irq tracking bits for hpdAlex Deucher1-1/+53
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)Alex Deucher1-2/+157
This enables the use of interrupts on r6xx/r7xx hardware. Interrupts are implemented via a ring buffer. The GPU adds interrupts vectors to the ring and the host reads them off in the interrupt handler. The interrupt controller requires firmware like the CP. This firmware must be installed and accessble to the firmware loader for interrupts to function. MSIs don't seem to work on my RS780. They work fine on all my discrete cards. I'm not sure about other RS780s or RS880s. I've disabled MSIs on RS780 and RS880, but it would probably be worth checking on some other systems. v2 - fix some checkpatch.pl problems; re-read the disp int status reg if we restart the ih; v3 - remove the irq handler if r600_irq_init() fails; remove spinlock in r600_ih_ring_fini(); move ih rb overflow check to r600_get_ih_wptr(); move irq ack to separate function; Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-26 23:05:37 +0300