summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/rv770.c
AgeCommit message (Collapse)AuthorFilesLines
2013-08-31drm/radeon/kms: remove r6xx+ blit copy routinesAlex Deucher1-7/+0
No longer used now that we use the async dma engines or CP DMA for bo copies. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-15drm/radeon/r7xx: fix copy paste typo in golden register setupAlex Deucher1-6/+6
Uses the wrong array size for some asics which can lead to garbage getting written to registers. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60674 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-08drm/radeon: only save UVD bo when we have open handlesChristian König1-1/+1
Otherwise just reinitialize from scratch on resume, and so make it more likely to succeed. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-08drm/radeon: always program the MC on startupAlex Deucher1-1/+2
For r6xx+ asics. This mirrors the behavior of pre-r6xx asics. We need to program the MC even if something else in startup() fails. Failure to do so results in an unusable GPU. Based on a fix from: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-08drm/radeon: fix halting UVDChristian König1-0/+2
Removing the clock/power or resetting the VCPU can cause hangs if that happens in the middle of a register write. Stall the memory and register bus before putting the VCPU into reset. Keep it in reset when unloading the module or suspending. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-14drm/radeon: never unpin UVD bo v3Christian König1-1/+1
Changing the UVD BOs offset on suspend/resume doesn't work because the VCPU internally keeps pointers to it. Just keep it always pinned and save the content manually. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66425 v2: fix compiler warning v3: fix CIK support Note: a version of this patch needs to go to stable. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-03radeon: Fix system hang issue when using KMS with older cardsAdis Hamzić1-4/+6
The current radeon driver initialization routines, when using KMS, are written so that the IRQ installation routine is called before initializing the WB buffer and the CP rings. With some ASICs, though, the IRQ routine tries to access the GFX_INDEX ring causing a call to RREG32 with the value of -1 in radeon_fence_read. This, in turn causes the system to completely hang with some cards, requiring a hard reset. A call stack that can cause such a hang looks like this (using rv515 ASIC for the example here): * rv515_init (rv515.c) * radeon_irq_kms_init (radeon_irq_kms.c) * drm_irq_install (drm_irq.c) * radeon_driver_irq_preinstall_kms (radeon_irq_kms.c) * rs600_irq_process (rs600.c) * radeon_fence_process - due to SW interrupt (radeon_fence.c) * radeon_fence_read (radeon_fence.c) * hang due to RREG32(-1) The patch moves the IRQ installation to the card startup routine, after the ring has been initialized, but before the IRQ has been set. This fixes the issue, but requires a check to see if the IRQ is already installed, as is the case in the system resume codepath. I have tested the patch on three machines using the rv515, the rv770 and the evergreen ASIC. They worked without issues. This seems to be a known issue and has been reported on several bug tracking sites by various distributions (see links below). Most of reports recommend booting the system with KMS disabled and then enabling KMS by reloading the radeon module. For some reason, this was indeed a usable workaround, however, UMS is now deprecated and disabled by default. Bug reports: https://bugzilla.redhat.com/show_bug.cgi?id=845745 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/561789 https://bbs.archlinux.org/viewtopic.php?id=156964 Signed-off-by: Adis Hamzić <adis@hamzadis.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-05-29radeon: use max_bus_speed to activate gen2 speedsKleber Sacilotto de Souza1-7/+2
radeon currently uses a drm function to get the speed capabilities for the bus, drm_pcie_get_speed_cap_mask. However, this is a non-standard method of performing this detection and this patch changes it to use the max_bus_speed attribute. From: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com> Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-29drm/radeon: UVD block on SUMO2 is the same as on SUMOChristian König1-3/+1
The chip id for SUMO2 isn't used. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63935 Tested-By: Dave Witbrodt <dawitbro@sbcglobal.net> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-02drm/radeon: consolidate UVD clock programmingChristian König1-93/+17
Instead of duplicating the code over and over again, just use a single function to handle the clock calculations. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-24drm/radeon/7xx: add support for golden register initAlex Deucher1-0/+652
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-22drm/radeon: put UVD PLLs in bypass modeChristian König1-7/+13
Just power down the PLL when we get a VCLK or DCLK of zero. Enabling the bypass mode early should also allow us to switch UVD clocks on the fly. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09drm/radeon/kms: replace *REG32_PCIE_P with *REG32_PCIE_PORTAlex Deucher1-16/+16
Avoid confusion with the *REG32_P mask macro. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09drm/radeon: add UVD tiling addr config v2Christian König1-0/+5
v2: set UVD tiling config for rv730 Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2013-04-09drm/radeon: add set_uvd_clocks callback for r7xx v3Christian König1-0/+156
v2: avoid 64bit divide v3: rv740 uses the evegreen upll configuration Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2013-04-09drm/radeon: UVD bringup v8Christian König1-0/+132
Just everything needed to decode videos using UVD. v6: just all the bugfixes and support for R7xx-SI merged in one patch v7: UVD_CGC_GATE is a write only register, lockup detection fix v8: split out VRAM fallback changes, remove support for RV770, add support for HEMLOCK, add buffer sizes checks Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09drm/radeon: clean up vram/gtt location handlingAlex Deucher1-1/+1
Add a per-asic MC (memory controller) mask which holds the mak address mask the asic is capable of. Use this when calculating the vram and gtt locations rather using asic specific functions or limiting everything to 32 bits. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-20drm/radeon: add a asic callback to get the xclkAlex Deucher1-0/+25
This is required to get the reference clock used by the gfx engine for things like timestamps. Fixes support for GL extensions the use timestamps on certain boards. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-04drm/radeon: split r6xx and r7xx copy_dma functionsAlex Deucher1-0/+74
- r6xx actually uses a slightly different packet format, although both formats seem to work ok. - r7xx doesn't have the count multiple of 2 limitation. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-11drm/radeon/kms: Add initial support for async DMA on r6xx/r7xxAlex Deucher1-2/+29
Uses the new multi-ring infrastucture. 6xx/7xx has a single async DMA ring. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-04Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-5/+5
Pull drm merge (part 1) from Dave Airlie: "So first of all my tree and uapi stuff has a conflict mess, its my fault as the nouveau stuff didn't hit -next as were trying to rebase regressions out of it before we merged. Highlights: - SH mobile modesetting driver and associated helpers - some DRM core documentation - i915 modesetting rework, haswell hdmi, haswell and vlv fixes, write combined pte writing, ilk rc6 support, - nouveau: major driver rework into a hw core driver, makes features like SLI a lot saner to implement, - psb: add eDP/DP support for Cedarview - radeon: 2 layer page tables, async VM pte updates, better PLL selection for > 2 screens, better ACPI interactions The rest is general grab bag of fixes. So why part 1? well I have the exynos pull req which came in a bit late but was waiting for me to do something they shouldn't have and it looks fairly safe, and David Howells has some more header cleanups he'd like me to pull, that seem like a good idea, but I'd like to get this merge out of the way so -next dosen't get blocked." Tons of conflicts mostly due to silly include line changes, but mostly mindless. A few other small semantic conflicts too, noted from Dave's pre-merged branch. * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (447 commits) drm/nv98/crypt: fix fuc build with latest envyas drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering drm/nv41/vm: fix and enable use of "real" pciegart drm/nv44/vm: fix and enable use of "real" pciegart drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie drm/nouveau: store supported dma mask in vmmgr drm/nvc0/ibus: initial implementation of subdev drm/nouveau/therm: add support for fan-control modes drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules drm/nouveau/therm: calculate the pwm divisor on nv50+ drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster drm/nouveau/therm: move thermal-related functions to the therm subdev drm/nouveau/bios: parse the pwm divisor from the perf table drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices drm/nouveau/therm: rework thermal table parsing drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table drm/nouveau: fix pm initialization order drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it drm/nouveau: log channel debug/error messages from client object rather than drm client drm/nouveau: have drm debugging macros build on top of core macros ...
2012-10-02UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/David Howells1-2/+2
Convert #include "..." to #include <path/...> in drivers/gpu/. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-09-20drm/radeon: Mark all possible functions / structs as staticLauri Kasanen1-5/+5
Let's allow GCC to optimize better. This exposed some five unused functions, but this patch doesn't remove them. Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-07-20drm/radeon/kms: auto detect pcie link speed from root portDave Airlie1-0/+11
This check the root ports supported link speeds and enables GEN2 mode if the 5.0 GT link speed is available. The first 3.0 cards are SI so they will probably need more investigation. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-17drm/radeon: record what is next valid wptr for each ring v4Christian König1-1/+3
Before emitting any indirect buffer, emit the offset of the next valid ring content if any. This allow code that want to resume ring to resume ring right after ib that caused GPU lockup. v2: use scratch registers instead of storing it into memory v3: skip over the surface sync for ni and si as well v4: use SET_CONFIG_REG instead of PACKET0 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-07-17drm/radeon: move radeon_ib_ring_tests out of chipset codeChristian König1-4/+0
Making it easier to control when it is executed. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-07-17drm/radeon: remove r600_blit_suspendChristian König1-1/+0
Just reinitialize the shader content on resume instead. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-07-17drm/radeon: remove ip_pool start/suspendChristian König1-11/+6
The IB pool is in gart memory, so it is completely superfluous to unpin / repin it on suspend / resume. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-07-17drm/radeon: remove FIXME comment from chipset suspendChristian König1-1/+0
For a normal suspend/resume we allready wait for the rings to be empty, and for a suspend/reasume in case of a lockup we REALLY don't want to wait for anything. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-06-16drm/radeon: add some additional 6xx/7xx/EG register initAlex Deucher1-1/+4
- SMX_SAR_CTL0 needs to be programmed correctly to prevent problems with memory exports in certain cases. - VC_ENHANCE needs to be initialized on 6xx/7xx. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/radeon: make audio_init consistent across asicsAlex Deucher1-12/+6
Call it in the asic startup callback on all asics. Previously r600 and rv770 called it in the startup and resume callbacks while all the other asics called it in the startup callback. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/radeon: fixup tiling group size and backendmap on r6xx-r9xx (v4)Alex Deucher1-216/+48
Tiling group size is always 256bits on r6xx/r7xx/r8xx/9xx. Also fix and simplify render backend map. This now properly sets up the backend map on r6xx-9xx which should improve 3D performance. Vadim benchmarked also: Some benchmarks on juniper (5750), fullscreen 1920x1080, first result - kernel 3.4.0+ (fb21affa), second - with these patches: Lightsmark: 91 fps => 123 fps +35% Doom3: 74 fps => 101 fps +36% Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/radeon: properly program gart on rv740, juniper, cypress, barts, hemlockAlex Deucher1-0/+2
Need to program an additional VM register. This doesn't not currently cause any problems, but allows us to program the proper backend map in a subsequent patch which should improve performance on these asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/radeon: fix bank information in tiling configAlex Deucher1-2/+6
While there are cards with more than 8 mem banks, the max number of banks from a tiling perspective is 8, so cap the tiling config at 8 banks. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43448 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm/radeon: make use of radeon_gem_init() consistentAlex Deucher1-4/+0
All radeon_gem_init() does is initialize the gem objects list. radeon_device.c does this explicitly. r600+ calls radeon_gem_init() so the list gets initialized twice. Older asics don't call it at all and rely on the the init in radeon_device.c. Just call radeon_gem_init() in radeon_device.c and remove the explicit calls from all the newer asics. All asics call radeon_gem_fini() in their fini pathes. That could possibly be cleaned up too. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-09drm/radeon: simplify semaphore handling v2Jerome Glisse1-1/+0
Directly use the suballocator to get small chunks of memory. It's equally fast and doesn't crash when we encounter a GPU reset. v2: rebased on new SA interface. Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-07Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel ↵Dave Airlie1-2/+2
into drm-core-next Daniel prepared this branch with a back-merge as git was getting very confused about changes in intel_display.c
2012-05-03drm/radeon: use central function for IB testingChristian König1-5/+2
Removing all the different error messages and having just one standard behaviour over all chipset generations. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-19radeon: fix r600/agp when vram is after AGP (v3)Jerome Glisse1-2/+2
If AGP is placed in the middle, the size_af is off-by-one, it results in VRAM being placed at 0x7fffffff instead of 0x8000000. v2: fix the vram_start setup. v3: also fix r7xx & newer ASIC Reported-by: russiane39 on #radeon Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Merge tag 'v3.3-rc7' into drm-core-nextDave Airlie1-0/+1
Merge the fixes so far into core-next, needed to test intel driver. Conflicts: drivers/gpu/drm/i915/intel_ringbuffer.c
2012-02-29drm/radeon/kms: make ring_start, ring_test, and ib_test per ringAlex Deucher1-1/+1
Each ring type may need a different variant. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König<christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29drm/radeon/kms: reorganize copy callbacksAlex Deucher1-1/+1
tidy up the radeon_asic struct, handle multiple rings better. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König<christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-22drm/radeon/kms: properly set accel working flag and bailout when falseJerome Glisse1-0/+1
If accel is not working many subsystem such as the ib pool might not be initialized properly that can lead to segfault inside kernel when cs ioctl is call with non working acceleration. To avoid this make sure the accel working flag is false when an error in GPU startup happen and return EBUSY from cs ioctl if accel is not working. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm/radeon: introduce a sub allocator and convert ib pool to it v4Jerome Glisse1-21/+22
Somewhat specializaed sub-allocator designed to perform sub-allocation for command buffer not only for current cs ioctl but for future command submission ioctl as well. Patch also convert current ib pool to use the sub allocator. Idea is that ib poll buffer can be share with other command buffer submission not having 64K granularity. v2 Harmonize pool handling and add suspend/resume callback to pin/unpin sa bo (tested on rv280, rv370, r420, rv515, rv610, rv710, redwood, cayman, rs480, rs690, rs880) v3 Simplify allocator v4 Fix radeon_ib_get error path to properly free fence Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm/radeon/kms: add some new ring params to better handle other ring typesAlex Deucher1-1/+2
Some rptr/wptrs fields have different offsets and not all rings are pm4 so add a new nop field. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm/radeon: precompute fence cpu/gpu addr once v3Jerome Glisse1-1/+7
Add a start fence driver helper function which will be call once for each ring and will compute cpu/gpu addr for fence depending on wether to use wb buffer or scratch reg. This patch replace initialize fence driver separately which was broken in regard of GPU lockup. The fence list for created, emited, signaled must be initialize once and only from the asic init callback not from the startup call back which is call from the gpu reset. v2: With this in place we no longer need to know the number of rings in fence_driver_init, also writing to the scratch reg before knowing its offset is a bad idea. v3: rebase on top of change to previous patch in the serie Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm/radeon: rename struct radeon_cp to radeon_ringChristian König1-6/+6
That naming seems to make more sense, since we not only want to run PM4 rings with it. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm/radeon: make cp variable an arrayChristian König1-5/+5
Replace cp, cp1 and cp2 members with just an array of radeon_cp structs. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm/radeon: make ring rptr and wptr register offsets variableChristian König1-1/+2
Every ring seems to have the concept of read and write pointers. Make the register offset variable so we can use the functions for different types of rings. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm/radeon: make all functions work with multiple rings.Christian König1-5/+6
Give all asic and radeon_ring_* functions a radeon_cp parameter, so they know the ring to work with. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-27 02:40:46 +0300