Age | Commit message (Collapse) | Author | Files | Lines |
|
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Unlock before returning on the error path.
Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240119190841.1619443-1-harshit.m.mogalapalli@oracle.com
|
|
Kickstart 6.9 development cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This removes the currently unused CLASS_DDC support (controllers set
the flag, but there is no client to use it).
Also, CLASS_SPD support gets simplified to prepare removal in the
future. Class based instantiation is not recommended these days
anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it.
Finally, quite some driver updates. Standing out are patches for the
wmt-driver which is refactored to support more variants.
This is the rebased pull request where a large series for the
designware driver was dropped"
* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
MAINTAINERS: use proper email for my I2C work
i2c: stm32f7: add support for stm32mp25 soc
i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
dt-bindings: i2c: document st,stm32mp25-i2c compatible
i2c: stm32f7: simplify status messages in case of errors
i2c: stm32f7: perform most of irq job in threaded handler
i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
i2c: i801: Add lis3lv02d for Dell XPS 15 7590
i2c: i801: Add lis3lv02d for Dell Precision 3540
i2c: wmt: Reduce redundant: REG_CR setting
i2c: wmt: Reduce redundant: function parameter
i2c: wmt: Reduce redundant: clock mode setting
i2c: wmt: Reduce redundant: wait event complete
i2c: wmt: Reduce redundant: bus busy check
i2c: mux: reg: Remove class-based device auto-detection support
i2c: make i2c_bus_type const
dt-bindings: at24: add ROHM BR24G04
eeprom: at24: use of_match_ptr()
i2c: cpm: Remove linux,i2c-index conversion from be32
i2c: imx: Make SDA actually optional for bus recovering
...
|
|
After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in
olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC.
Class-based device auto-detection is a legacy mechanism and shouldn't
be used in new code. So we can remove this class completely now.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Commit d3e040f450ec ("drm/rockchip: inno_hdmi: Get rid of mode_set")
started using drm_atomic_get_new_connector_state and
drm_atomic_get_new_crtc_state which are defined in drm_atomic.h
Building does currently only work if CONFIG_OF and CONFIG_DRM_PANEL_BRIDGE
are enabled since this will include drm_atomic.h via drm_bridge.h (see
drm_of.h).
Explicitly include drm_atomic.h in inno_hdmi.c to fix this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401100949.ZVRr0pIa-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202401081720.UtgAZgba-lkp@intel.com/
Fixes: d3e040f450ec ("drm/rockchip: inno_hdmi: Get rid of mode_set")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115092434.41695-2-knaerzche@gmail.com
|
|
Commit 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
introduced a variable which ended up being unused:
rockchip_drm_vop2.c:1688:23: warning: variable ‘if_dclk_rate’ set but not used [-Wunused-but-set-variable]
This has been initially used as part of a formula to compute the clock
dividers, but eventually it has been replaced by static values.
Drop the variable declaration and move its assignment to the comment
block, to serve as documentation of how the constants have been
generated.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105174007.98054-1-cristian.ciocaltea@collabora.com
|
|
The rockchip_drm_fb.h header contains just a single function which is
not directly used by the VOP2 driver. Drop the unnecessary include.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104143951.85219-1-cristian.ciocaltea@collabora.com
|
|
This scary message can misled the user into thinking something bad has
happened and needs to be fixed, however it could simply be part of a
normal boot process where EPROBE_DEFER is taken into account. Therefore,
let's use dev_err_probe so that this message doesn't get shown (by
default) when the return code is EPROBE_DEFER.
Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120-rk-lvds-defer-msg-v2-2-9c59a5779cf9@theobroma-systems.com
|
|
ret variable stores the return value of drm_of_find_panel_or_bridge
which can return error codes different from EPROBE_DEFER. Therefore,
let's just return that error code instead of forcing it to EPROBE_DEFER.
Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120-rk-lvds-defer-msg-v2-1-9c59a5779cf9@theobroma-systems.com
|
|
Now that we have proper pixelclock-based mode validation we can drop the
custom fill_modes hook.
CRTC size validation for the display controller has been added with
Commit 8e140cb60270 ("drm/rockchip: vop: limit maximum resolution to
hardware capabilities")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-27-knaerzche@gmail.com
|
|
As per TRM this controller supports pixelclocks starting from 25 MHz. The
maximum supported pixelclocks are defined by the phy configurations we
have. Also it can't support modes that require doubled clocks. If the
variant has a phy reference clock we can additionally validate against VESA
DMT'srecommendations.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-26-knaerzche@gmail.com
|
|
This variant requires the phy reference clock to be enabled before the DDC
block can work and the (initial) DDC bus frequency is calculated based on
the rate of this clock. Besides the only difference is phy configuration
required to make the driver working for this variant as well.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-25-knaerzche@gmail.com
|
|
In preparation to support RK3128's integration of the controller, this
patch adds a simple variant implementation. They mainly differ in the phy
configuration required, so those are part of the match_data. The values
have been taken from downstream. The pixelclocks in there are meant to be
max-inclusive.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-24-knaerzche@gmail.com
|
|
The VOP2 driver needs this port ID to properly configure the
display data routing.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103181301.3339595-1-l.stach@pengutronix.de
|
|
This splits setting the power mode of the controller / phy in two
functions. It's done in preparation of setting up the phy based on the
pixelclock.
No functional changes intended.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-23-knaerzche@gmail.com
|
|
inno_hdmi_reset is only ever called when initializing the controller. At
this point it’s completely uneccessary to power up the PHY, since all
what has to work at this point is the DDC bus. The phy will be powered up
correctly when a mode is set in inno_hdmi_encoder_enable and disabled in
inno_hdmi_encoder_disable.
Set it to LOWER_PWR after resetting the controller.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-22-knaerzche@gmail.com
|
|
The display controller will always give full range RGB regardless of the
mode set, but HDMI requires certain modes to be transmitted in limited
range RGB. This is especially required for HDMI sinks which do not support
non-standard quantization ranges.
This enables color space conversion for those modes and sets the
quantization range accordingly in the AVI infoframe.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-21-knaerzche@gmail.com
|
|
The data which is currently hold in hdmi_data should not be part of device
itself but of the connector state.
Introduce a connector state subclass and move the data from hdmi_data in
there.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-20-knaerzche@gmail.com
|
|
The inclusion syscon.h isn't used anywhere. Remove it.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-19-knaerzche@gmail.com
|
|
The struct member irq isn't used anywhere. Drop it.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-18-knaerzche@gmail.com
|
|
The drm_dev field in the inno_hdmi struct stores a pointer to the DRM
device but is never used anywhere in the driver. Let's remove it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-17-knaerzche@gmail.com
|
|
The inno_hdmi driver relies on its own internal infoframe type matching
the hardware.
This works fine, but in order to make further reworks easier, let's
switch to the HDMI spec definition of those types.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-16-knaerzche@gmail.com
|
|
The code to upload infoframes to the controller uses a weird construct
which, based on the previous function call return code, will either
disable or enable that infoframe.
In order to get rid of that argument, let's split the function to
disable the infoframe into a separate function and make it obvious what
we are doing in the error path.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-15-knaerzche@gmail.com
|
|
The HDMI vendor infoframe is only meant to be sent with 4k60 modes and
higher, but the controller doesn't support them. Let's drop them from
the kernel.
Suggested-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-14-knaerzche@gmail.com
|
|
The tmds_rate field in the inno_hdmi structure is used mostly to
configure the internal i2c controller divider through a call to the
inno_hdmi_i2c_init() function.
We can simply make that rate an argument to that function, which also
removes a workaround to initialize the divider at probe time when we
don't have a mode yet.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-13-knaerzche@gmail.com
|
|
Now that the unneeded support for YUV based input formats is gone, the csc
coefficients for those formats can be dropped as well.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-12-knaerzche@gmail.com
|
|
The driver has a lot of logic to deal with multiple input formats, but
hardcodes it to RGB. This means that most of that code has been dead
code, so let's get rid of it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
[made checkpatch happy]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-11-knaerzche@gmail.com
|
|
The sink_has_audio flag is not used anywhere in the driver so let's get
rid of it. It's redundant with drm_display_info.has_audio anyway.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-10-knaerzche@gmail.com
|
|
The mode's VIC is only ever used in the inno_hdmi_setup() function so
there's no need to store it in the main structure.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
[made checkpatch happy]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-9-knaerzche@gmail.com
|
|
We're not doing anything special in atomic_mode_set so we can simply
merge it into atomic_enable.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-8-knaerzche@gmail.com
|
|
The inno_hdmi encoder still uses the !atomic variants of enable, disable
and modeset. Convert to their atomic equivalents.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-7-knaerzche@gmail.com
|
|
The driver maintains a copy of the adjusted mode but doesn't use it
anywhere. Remove it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-6-knaerzche@gmail.com
|
|
The mode_fixup implementation doesn't do anything, so we can simply
remove it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-5-knaerzche@gmail.com
|
|
The controller wants the difference between *total and *sync_start in the
HDMI_VIDEO_EXT_*DELAY registers. Otherwise the signal is very unstable for
certain non-VIC modes. See downstream commit [0].
[0] https://github.com/rockchip-linux/kernel/commit/8eb559f2502c
Fixes: 412d4ae6b7a5 ("drm/rockchip: hdmi: add Innosilicon HDMI support")
Co-developed-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-4-knaerzche@gmail.com
|
|
In contrast to RK3036, RK312x SoCs have multiple output channels such as
RGB (i.e. LVDS TTL), LVDS, DSI and HDMI.
In order to support that, this splits output from RK3036 and defines an
separate one for RK3126 with the registers required to enable the
appropriate output and setup the correct polarity.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-3-knaerzche@gmail.com
|
|
No functional modification involved.
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:1708 rk3588_calc_cru_cfg() warn: inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7778
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219062635.100718-1-jiapeng.chong@linux.alibaba.com
|
|
Marek Report a possible irq lock inversion dependency warning when
commit 81a06f1d02e5 ("Revert "drm/rockchip: vop2: Use regcache_sync()
to fix suspend/resume"") lands linux-next.
I can reproduce this warning with:
CONFIG_PROVE_LOCKING=y
CONFIG_DEBUG_LOCKDEP=y
It seems than when use regmap_reinit_cache at runtime whith Mark's
commit 3d59c22bbb8d ("drm/rockchip: vop2: Convert to use maple tree
register cache"), it will trigger a possible irq lock inversion dependency
warning.
One solution is switch back to REGCACHE_RBTREE, but it seems that
REGCACHE_MAPLE is the future, so I avoid using regmap_reinit_cache,
and drop all the regcache when vop is disabled, then we get a fresh
start at next enbable time.
Fixes: 81a06f1d02e5 ("Revert "drm/rockchip: vop2: Use regcache_sync() to fix suspend/resume"")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/98a9f15d-30ac-47bf-9b93-3aa2c9900f7b@samsung.com/
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
[dropped the large kernel log of the lockdep report from the message]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231217084415.2373043-1-andyshrk@163.com
|
|
VOP2_VP_FEATURE_OUTPUT_10BIT
VOP2 has multiple independent video ports with different
feature, so rename VOP_FEATURE_OUTPUT_10BIT to
VOP2_VP_FEATURE_OUTPUT_10BIT for more clearly meaning.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115931.1785495-1-andyshrk@163.com
|
|
VOP2 on rk3588:
Four video ports:
VP0 Max 4096x2160
VP1 Max 4096x2160
VP2 Max 4096x2160
VP3 Max 2048x1080
4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
4 4K Esmart windows with line RGB/YUV support
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115919.1785435-1-andyshrk@163.com
|
|
The vop2 need to reference more grf(system grf, vop grf, vo0/1 grf,etc)
in the upcoming rk3588.
So we rename the current system grf to sys_grf.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115826.1785190-1-andyshrk@163.com
|
|
We need to setup background delay cycle and prescan
delay cycle when a mode is enable to avoid trigger
POST_BUF_EMPTY irq on rk3588.
Note: RK356x has no such requirement.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115815.1785131-1-andyshrk@163.com
|
|
Set overlay mode register according to the
output mode is yuv or rgb.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115805.1785073-1-andyshrk@163.com
|
|
The write mask bit is used to make sure when writing
config done bit for one VP will not overwrite the other.
Unfortunately, the write mask bit is missing on
rk3566/8, that means when we write to these bits,
it will not take any effect.
We need this to make the vop work properly after
rk3566/8 variants.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115752.1785013-1-andyshrk@163.com
|
|
linear mode
The enable bit and transform offset of cluster windows should be
cleared when it work at linear mode, or we may have a iommu fault
issue on rk3588 which cluster windows switch between afbc and linear
mode.
As the cluster windows of rk3568 only supports afbc format
so is therefore not affected.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115741.1784954-1-andyshrk@163.com
|
|
At first we thought the half_block_en bit in AFBCD_CTRL register
only work in afbc mode. But the fact is that it control the line
buffer in all mode(afbc/tile/linear), so we need configure it in
all case.
As the cluster windows of rk3568 only supports afbc format
so is therefore not affected.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115730.1784893-1-andyshrk@163.com
|
|
This reverts commit b63a553e8f5aa6574eeb535a551817a93c426d8c.
regcache_sync will try to reload the configuration in regcache to
hardware, but the registers of 4 Cluster windows and Esmart1/2/3 on
the upcoming rk3588 can not be set successfully before internal PD
power on.
Also it's better to keep the hardware register as it is before we really
enable it.
So let's revert this version, and keep the first version:
commit afa965a45e01 ("drm/rockchip: vop2: fix suspend/resume")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115719.1784834-1-andyshrk@163.com
|
|
The output interface related definition can shared between
vop and vop2, move them to rockchip_drm_drv.h can avoid duplicated
definition.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115627.1784735-1-andyshrk@163.com
|
|
Thomas Zimermann needs 8d6ef26501 ("drm/ast: Disconnect BMC if
physical connector is connected") for further ast work in -next.
Minor conflicts in ivpu between 3de6d9597892 ("accel/ivpu: Pass D0i3
residency time to the VPU firmware") and 3f7c0634926d
("accel/ivpu/37xx: Fix hangs related to MMIO reset") changing adjacent
lines.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Without this header, the newly added code fails to build:
drivers/gpu/drm/rockchip/rk3066_hdmi.c: In function 'rk3066_hdmi_encoder_enable':
drivers/gpu/drm/rockchip/rk3066_hdmi.c:397:22: error: implicit declaration of function 'drm_atomic_get_new_connector_state'; did you mean 'drm_atomic_helper_connector_reset'? [-Werror=implicit-function-declaration]
397 | conn_state = drm_atomic_get_new_connector_state(state, &hdmi->connector);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| drm_atomic_helper_connector_reset
drivers/gpu/drm/rockchip/rk3066_hdmi.c:397:20: error: assignment to 'struct drm_connector_state *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
397 | conn_state = drm_atomic_get_new_connector_state(state, &hdmi->connector);
| ^
drivers/gpu/drm/rockchip/rk3066_hdmi.c:401:22: error: implicit declaration of function 'drm_atomic_get_new_crtc_state'; did you mean 'drm_atomic_helper_swap_state'? [-Werror=implicit-function-declaration]
401 | crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| drm_atomic_helper_swap_state
drivers/gpu/drm/rockchip/rk3066_hdmi.c:401:20: error: assignment to 'struct drm_crtc_state *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
401 | crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc);
| ^
Fixes: ae3436a5e7c2 ("drm/rockchip: rk3066_hdmi: Switch encoder hooks to atomic")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122221838.3164349-1-arnd@kernel.org
|