summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/stm
AgeCommit message (Collapse)AuthorFilesLines
2020-12-15drm: automatic legacy gamma supportTomi Valkeinen1-1/+0
To support legacy gamma ioctls the drivers need to set drm_crtc_funcs.gamma_set either to a custom implementation or to drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the latter. We can simplify this by making the core handle it automatically. Move the drm_atomic_helper_legacy_gamma_set() functionality into drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com
2020-11-06drm/<drivers>: Constify struct drm_driverDaniel Vetter1-1/+1
Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: kernel test robot <lkp@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
2020-11-02drm/atomic: Pass the full state to CRTC atomic begin and flushMaxime Ripard1-1/+1
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_begin and atomic_flush. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_begin(crtc, old_crtc_state); + FUNCS->atomic_begin(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_flush(crtc, old_crtc_state); + FUNCS->atomic_flush(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_begin(crtc, crtc_state); + FUNCS->atomic_begin(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_flush(crtc, crtc_state); + FUNCS->atomic_flush(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech
2020-10-09drm/atomic: Pass the full state to CRTC atomic enable/disableMaxime Ripard1-2/+2
If the CRTC driver ever needs to access the full DRM state, it can't do so at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state will have cleared the pointer from the struct drm_crtc_state to the struct drm_atomic_state before calling those hooks. In order to allow that, let's pass the full DRM state to atomic_enable and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_disable(crtc, crtc_state); + FUNCS->atomic_disable(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_enable(crtc, crtc_state); + FUNCS->atomic_enable(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_enable = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech
2020-07-08drm/stm: repair runtime power managementMarek Vasut1-0/+3
Add missing pm_runtime_get_sync() into ltdc_crtc_atomic_enable() to match pm_runtime_put_sync() in ltdc_crtc_atomic_disable(), otherwise the LTDC might suspend via runtime PM, disable clock, and then fail to resume later on. The test which triggers it is roughly -- run qt5 application which uses eglfs platform and etnaviv, stop the application, sleep for 15 minutes, run the application again. This leads to a timeout waiting for vsync, because the LTDC has suspended, but did not resume. Fixes: 35ab6cfbf211 ("drm/stm: support runtime power management") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Yannick Fertré <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> To: dri-devel@lists.freedesktop.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200229221649.90813-1-marex@denx.de
2020-07-08drm/stm: ltdc: remove call of pm-runtime functionsYannick Fertre1-16/+0
It is not necessary to suspend or stop the ltdc clocks to modify the pixel clock. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701120402.6444-1-yannick.fertre@st.com
2020-06-10drm/stm: Set GEM CMA functions with DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATEThomas Zimmermann1-6/+1
DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE sets the functions in struct drm_driver to their defaults. No functional changes are made. v2: * update for DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-35-tzimmermann@suse.de
2020-06-10drm/stm: Use GEM CMA object functionsThomas Zimmermann1-5/+1
Create GEM objects with drm_gem_cma_create_object_default_funcs(), which allocates the object and sets CMA's default object functions. Corresponding callbacks in struct drm_driver are cleared. No functional changes are made. Driver and object-function instances use the same callback functions, with the exception of vunmap. The implementation of vunmap is empty and left out in CMA's default object functions. v3: * convert to DRIVER_OPS macro in a separate patch Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-34-tzimmermann@suse.de
2020-04-27drm/stm: ltdc: check number of endpointsYannick Fertre1-50/+52
Number of endpoints could exceed the fix value MAX_ENDPOINTS(2). Instead of increase simply this value, the number of endpoint could be read from device tree. Load sequence has been a little rework to take care of several panel or bridge which can be connected/disconnected or enable/disable. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/1582877258-1112-1-git-send-email-yannick.fertre@st.com
2020-03-26drm/stm: Drop explicit drm_mode_config_cleanup callDaniel Vetter1-6/+4
It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: Another driver with a bit much devm_kzalloc, which should probably use drmm_kzalloc instead ... v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-39-daniel.vetter@ffwll.ch
2020-02-26drm/bridge: Extend bridge API to disable connector creationLaurent Pinchart1-1/+1
Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core). Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet. The change is based on the following semantic patch, with manual review and edits. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... } @ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> } @@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
2020-02-13drm/stm: Convert to CRTC VBLANK callbacksThomas Zimmermann2-1/+1
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert stm over. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-16-tzimmermann@suse.de
2020-02-13drm/stm: Convert to struct drm_crtc_helper_funcs.get_scanout_position()Thomas Zimmermann3-42/+39
The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert stm over. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Yannick Fertré <yannick.fertre@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-15-tzimmermann@suse.de
2020-02-04drm/stm: dsi: stm mipi dsi doesn't print error on probe deferralEtienne Carriere1-1/+3
Change DSI driver to not print an error trace when probe is deferred for a clock resource. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/1579602245-7577-1-git-send-email-yannick.fertre@st.com
2020-02-04drm/stm: ltdc: check crtc state before enabling LIEYannick Fertre1-1/+6
Following investigations of a hardware bug, the LIE interrupt can occur while the display controller is not activated. LIE interrupt (vblank) don't have to be set if the CRTC is not enabled. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/1579601650-7055-1-git-send-email-yannick.fertre@st.com
2020-02-04drm/stm: ltdc: add number of interruptsYannick Fertre2-15/+16
The number of interrupts depends on the ltdc version. Don't try to get interrupt which not exist, avoiding kernel warning messages. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/1579601632-7001-1-git-send-email-yannick.fertre@st.com
2019-12-20drm/stm: ltdc: move pinctrl to encoder mode setYannick Fertré1-6/+18
The pin control must be set to default as soon as possible to establish a good video link between tv & bridge hdmi (encoder mode set is call before encoder enable). Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/1574850218-13257-1-git-send-email-yannick.fertre@st.com
2019-12-16drm/bridge/synopsys: dsi: driver-specific configuration of phy timingsHeiko Stuebner1-0/+13
The timing values for dw-dsi are often dependent on the used display and according to Philippe Cornu will most likely also depend on the used phy technology in the soc-specific implementation. To solve this and allow specific implementations to define them as needed add a new get_timing callback to phy_ops and call this from the dphy_timing function to retrieve the necessary values for the specific mode. Right now this handles the hs2lp + lp2hs where Rockchip SoCs need handling according to the phy speed, while STM seems to be ok with static values. changes in v5: - rebase on 5.5-rc1 - merge into px30 dsi series to prevent ordering conflicts changes in v4: - rebase to make it directly fit on top of drm-misc-next after all changes in v3: - check existence of phy_ops->get_timing in __dw_mipi_dsi_probe() - emit actual error when get_timing() call fails - add tags from Philippe and Yannick changes in v2: - add driver-specific handling, don't force all bridge users to use the same timings, as suggested by Philippe Suggested-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Yannick Fertre <yannick.fertre@st.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-2-heiko@sntech.de
2019-09-16drm/stm: dsi: higher pll out only in video burst modeYannick Fertré1-1/+4
In order to better support video non-burst modes, the +20% on pll out is added only in burst mode. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Reviewed-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1568278589-20400-1-git-send-email-yannick.fertre@st.com
2019-09-09drm/stm: ltdc: add pinctrl for DPI encoder modeYannick Fertré1-0/+35
The implementation of functions encoder_enable and encoder_disable make possible to control the pinctrl according to the encoder type. The pinctrl must be activated only if the encoder type is DPI. This helps to move the DPI-related pinctrl configuration from all the panel or bridge to the LTDC dt node. Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1567761708-31777-1-git-send-email-yannick.fertre@st.com
2019-09-08drm/bridge: panel: Infer connector type from panel by defaultLaurent Pinchart1-2/+2
The drm panel bridge creates a connector using a connector type explicitly passed by the display controller or bridge driver that instantiates the panel bridge. Now that drm_panel reports its connector type, we can use it to avoid passing an explicit (and often incorrect) connector type to drm_panel_bridge_add() and devm_drm_panel_bridge_add(). Several drivers report incorrect or unknown connector types to userspace. Reporting a different type may result in a breakage. For that reason, rename (devm_)drm_panel_bridge_add() to (devm_)drm_panel_bridge_add_typed(), and add new (devm_)drm_panel_bridge_add() functions that use the panel connector type. Update all callers of (devm_)drm_panel_bridge_add() to the _typed function, they will be converted one by one after testing. The panel drivers have been updated with the following Coccinelle semantic patch, with manual inspection and fixes to indentation. @@ expression bridge; expression dev; expression panel; identifier type; @@ ( -bridge = drm_panel_bridge_add(panel, type); +bridge = drm_panel_bridge_add_typed(panel, type); | -bridge = devm_drm_panel_bridge_add(dev, panel, type); +bridge = devm_drm_panel_bridge_add_typed(dev, panel, type); ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-3-laurent.pinchart@ideasonboard.com
2019-07-25drm/stm: attach gem fence to atomic stateAhmad Fatoum1-0/+2
To properly synchronize with other devices the fence from the GEM object backing the framebuffer needs to be attached to the atomic state, so the commit work can wait on fence signaling. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190712084228.8338-1-l.stach@pengutronix.de
2019-07-01drm/stm: drop use of drmP.hSam Ravnborg1-3/+7
Drop use of the deprecated header file drmP.h from the sole user in the stm driver. Replace with necessary include files. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-4-sam@ravnborg.org
2019-06-21drm/stm: Drop drm_gem_prime_export/importDaniel Vetter1-2/+0
They're the default. Aside: Would be really nice to switch the others over to drm_gem_object_funcs. Acked-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-31-daniel.vetter@ffwll.ch
2019-06-21drm/prime: Actually remove DRIVER_PRIME everywhereDaniel Vetter1-2/+1
Split out to make the functional changes stick out more. All places where DRIVER_PRIME was used have been removed in previous patches already. v2: amdgpu gained DRIVER_SYNCOBJ_TIMELINE. v3: amdgpu lost DRIVER_SYNCOBJ_TIMELINE. v4: Don't add a space in i915_drv.c (Sam) v5: Add note that previous patches removed all the DRIVER_PRIME users already (Emil). v6: Fixupe ingenic (new driver) while applying. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: amd-gfx@lists.freedesktop.org Cc: etnaviv@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: spice-devel@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20190617153924.414-1-daniel.vetter@ffwll.ch
2019-06-20drm/stm: drv: fix suspend/resumeYannick Fertré1-7/+8
Without this fix, the system can not go in "suspend" mode due to an error in drv_suspend function. Fixes: 35ab6cfbf211 ("drm/stm: support runtime power management") Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1560755897-5002-1-git-send-email-yannick.fertre@st.com
2019-06-12drm/stm: dsi: add power on/off phy opsYannick Fertré1-1/+20
These new physical operations are helpful to power_on/off the dsi wrapper. If the dsi wrapper is powered in video mode, the display controller (ltdc) register access will hang when DSI fifos are full. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1558952499-15418-3-git-send-email-yannick.fertre@st.com
2019-06-07drm/stm: support runtime power managementYannick Fertré2-24/+86
This patch enables runtime power management (runtime PM) support for the display controller. pm_runtime_enable() and pm_runtime_disable() are added during ltdc load and unload respectively. pm_runtime_get_sync() and pm_runtime_put_sync() are added for ltdc register access. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1559550722-14091-1-git-send-email-yannick.fertre@st.com
2019-06-07drm/stm: ltdc: No message if probeYannick Fertré1-1/+1
Print display controller hardware version in debug mode only. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1559550694-14042-1-git-send-email-yannick.fertre@st.com
2019-05-28Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst2-0/+2
This picks up rc2 for us as well. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2019-05-28drm/stm: ltdc: restore calls to clk_{enable/disable}Benjamin Gaignard1-0/+2
Restore calls to clk_{enable/disable} deleted after applying the wrong version of the patch Fixes: fd6905fca4f0 ("drm/stm: ltdc: remove clk_round_rate comment") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190527115830.15836-1-benjamin.gaignard@st.com
2019-05-28Merge tag 'drm-misc-next-2019-05-24' of ↵Dave Airlie2-31/+96
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.3, try #2: UAPI Changes: - Add HDR source metadata property. - Make drm.h compile on GNU/kFreeBSD by including stdint.h - Clarify how the userspace reviewer has to review new kernel UAPI. - Clarify that for using new UAPI, merging to drm-next or drm-misc-next should be enough. Cross-subsystem Changes: - video/hdmi: Add unpack function for DRM infoframes. - Device tree bindings: * Updating a property for Mali Midgard GPUs * Updating a property for STM32 DSI panel * Adding support for FriendlyELEC HD702E 800x1280 panel * Adding support for Evervision VGG804821 800x480 5.0" WVGA TFT panel * Adding support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT. * Adding support for Three Five displays TFC S9700RTWV43TR-01B 800x480 panel with resistive touch found on TI's AM335X-EVM. * Adding support for EDT ETM0430G0DH6 480x272 panel. - Add OSD101T2587-53TS driver with DT bindings. - Add Samsung S6E63M0 panel driver with DT bindings. - Add VXT VL050-8048NT-C01 800x480 panel with DT bindings. - Dma-buf: - Make mmap callback actually optional. - Documentation updates. - Fix debugfs refcount inbalance. - Remove unused sync_dump function. - Fix device tree bindings in drm-misc-next after a botched merge. Core Changes: - Add support for HDR infoframes and related EDID parsing. - Remove prime sg_table caching, now done inside dma-buf. - Add shiny new drm_gem_vram helpers for simple VRAM drivers; with some fixes to the new API on top. - Small fix to job cleanup without timeout handler. - Documentation fixes to drm_fourcc. - Replace lookups of drm_format with struct drm_format_info; remove functions that become obsolete by this conversion. - Remove double include in bridge/panel.c and some drivers. - Remove drmP.h include from drm/edid and drm/dp. - Fix null pointer deref in drm_fb_helper_hotplug_event(). - Remove most members from drm_fb_helper_crtc, only mode_set is kept. - Remove race of fb helpers with userspace; only restore mode when userspace is not master. - Move legacy setup from drm_file.c to drm_legacy_misc.c - Rework scheduler job destruction. - drm/bus was removed, remove from TODO. - Add __drm_atomic_helper_crtc_reset() to subclass crtc_state, and convert some drivers to use it (conversion is not complete yet). - Bump vblank timeout wait to 100 ms for atomic. - Docbook fix for drm_hdmi_infoframe_set_hdr_metadata. Driver Changes: - sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS instead of definining manually. - v3d: Small cleanups, adding support for compute shaders, reservation/synchronization fixes and job management refactoring, fixes MMU and debugfs. - lima: Fix null pointer in irq handler on startup, set default timeout for scheduled jobs. - stm/ltdc: Assorted fixes and adding FB modifier support. - amdgpu: Avoid hw reset if guilty job was already signaled. - virtio: Add seqno to fences, add trace events, use correct flags for fence allocation. - Convert AST, bochs, mgag200, vboxvideo, hisilicon to the new drm_gem_vram API. - sun6i_mipi_dsi: Support DSI GENERIC_SHORT_WRITE_2 transfers. - bochs: Small fix to use PTR_RET_OR_ZERO and driver unload. - gma500: header fixes - cirrus: Remove unused files. - mediatek: Fix compiler warning after merging the HDR series. - vc4: Rework binner bo handling. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/052875a5-27ba-3832-60c2-193d950afdff@linux.intel.com
2019-05-24drm/stm: dsi: check hardware versionYannick Fertré1-1/+23
Check version of DSI hardware IP. Only versions 1.30 & 1.31 are supported. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1557500579-19720-1-git-send-email-yannick.fertre@st.com
2019-05-24drm/stm: ltdc: remove clk_round_rate commentYannick Fertré1-7/+3
Clk_round_rate returns rounded clock without changing the hardware in any way. This function couldn't replace set_rate/get_rate calls. Todo comment has been removed & a new log inserted. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1557500600-19771-1-git-send-email-yannick.fertre@st.com
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20drm: Remove users of drm_format_info_plane_cppMaxime Ripard1-1/+1
drm_format_info_plane_cpp() basically just returns the cpp array content found in the drm_format_info structure. Since it's pretty trivial, let's remove the function and have the users use the array directly Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/c0a78c87cd0410a1819edad2794ad06543c85bb5.1558002671.git-series.maxime.ripard@bootlin.com
2019-05-20drm/fourcc: Pass the format_info pointer to drm_format_plane_cppMaxime Ripard1-1/+1
So far, the drm_format_plane_cpp function was operating on the format's fourcc and was doing a lookup to retrieve the drm_format_info structure and return the cpp. However, this is inefficient since in most cases, we will have the drm_format_info pointer already available so we shouldn't have to perform a new lookup. Some drm_fourcc functions also already operate on the drm_format_info pointer for that reason, so the API is quite inconsistent there. Let's follow the latter pattern and remove the extra lookup while being a bit more consistent. In order to be extra consistent, also rename that function to drm_format_info_plane_cpp and to a static function in the header to match the current policy. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/32aa13e53dbc98a90207fd290aa8e79f785fb11e.1558002671.git-series.maxime.ripard@bootlin.com
2019-05-17drm/stm: dsi: add regulator supportYannick Fertré1-11/+49
Add support of regulator for the phy part of the DSI controller. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1557826556-10079-3-git-send-email-yannick.fertre@st.com
2019-05-06drm/stm: ltdc: return appropriate error code during probeFabien Dessenne1-2/+3
During probe, return the "clk_get" error value instead of -ENODEV. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1556114601-30936-3-git-send-email-fabien.dessenne@st.com
2019-05-06drm/stm: ltdc: manage the get_irq probe defer caseFabien Dessenne1-0/+3
Manage the -EPROBE_DEFER error case for the ltdc IRQ. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1556114601-30936-2-git-send-email-fabien.dessenne@st.com
2019-04-24drm/stm: ltdc: add modifier supportYannick Fertré1-1/+20
Add support of DRM_FORMAT_MOD_LINEAR modifier. Signed-off-by: Mickael Reulier <mickael.reulier@st.com> Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/1554283514-2960-1-git-send-email-yannick.fertre@st.com Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2019-04-24drm/stm: ltdc: reset controller to avoid partial refreshYannick Fertré1-5/+6
Display controller reset must be done as soon as possible after enable the clock to avoid partial refresh on screen. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1554283453-2879-1-git-send-email-yannick.fertre@st.com
2019-04-24drm/stm: ltdc: limit number of layer to avoid memory overflowYannick Fertré1-2/+5
If the number of layer is greater than LTDC_MAX_LAYER, we can have memory overflow when reading plane_fpsi[]. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1554283216-2700-1-git-send-email-yannick.fertre@st.com
2019-04-24drm/stm: ltdc: update planes at next vblank to avoid partial refreshYannick Fertré1-2/+2
Plane updates must be synchronized on vblank with the shadow register mechanism to avoid partial refresh on screen. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1554103457-29595-1-git-send-email-yannick.fertre@st.com
2019-04-24drm/stm: ltdc: fix data enable polarityYannick Fertré1-1/+1
Wrong DISPLAY_FLAGS used to set the data enable polarity. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1553874620-31468-1-git-send-email-yannick.fertre@st.com
2019-04-24drm/stm: ltdc: use DRM_WARN for fifo & transfer error messagesPhilippe Cornu1-2/+2
Use DRM_WARN() instead of DRM_DEBUG_DRIVER() to better inform the user in case of fifo underruns or transfer errors. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1553874548-31366-1-git-send-email-yannick.fertre@st.com
2019-04-24drm/stm: ltdc: disable hw interrupts before its handler initYannick Fertré1-4/+4
Interrupt register must be disabled before call of devm_request_threaded_irq function to avoid dummy interruption. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1553874485-31259-1-git-send-email-yannick.fertre@st.com
2019-04-01drm/stm: add sleep power managementYannick Fertré3-0/+62
Implements system sleep power management ops. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1553156120-13851-1-git-send-email-yannick.fertre@st.com
2019-04-01drm/stm: dw_mipi_dsi-stm: add sleep power managementYannick Fertré1-0/+28
Implements system sleep power management ops. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1553156033-13792-1-git-send-email-yannick.fertre@st.com
2019-03-11drm/stm: fix CONFIG_FB dependencyArnd Bergmann1-1/+1
The DRM_STM driver can be built independently of the framebuffer layer, but it causes a Kconfig warning: WARNING: unmet direct dependencies detected for FB_PROVIDE_GET_FB_UNMAPPED_AREA Depends on [n]: HAS_IOMEM [=y] && FB [=n] Selected by [y]: - DRM_STM [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARCH_STM32 [=n] || ARCH_MULTIPLATFORM [=y]) Selecting FB_PROVIDE_GET_FB_UNMAPPED_AREA actually has no effect if CONFIG_FB is disabled, so we can make it a conditional 'select' instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190307155323.2949975-1-arnd@arndb.de
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-01 08:07:40 +0300