Age | Commit message (Collapse) | Author | Files | Lines |
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to of_property_read_bool().
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20230310144706.1542295-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com> # i.MX bridge
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20230310144705.1542207-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Remove the flag prefer_shadow_fbdev from struct drm_mode_config.
Drivers set this flag to enable shadow buffering in the generic
fbdev emulation. Such shadow buffering is now mandatory, so the
flag is unused.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320150751.20399-3-tzimmermann@suse.de
|
|
Use the fbdev emulation that is optimized for DMA helpers. Avoids
possible shadow buffering and makes the code simpler.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-20-tzimmermann@suse.de
|
|
Set the VGA bit for unblanking with macro constants instead of magic
values. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-18-tzimmermann@suse.de
|
|
The hardware settings for color format and pitch are state of the
primary plane. Store the values in the primary plane's state structure
struct cirrus_primary_plane_state. Adapt all callers.
All fields in struct cirrus_device are now considered immutable after
initialization. Plane updates consider the difference between the old
and the new plane state before updating format or pitch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-17-tzimmermann@suse.de
|
|
The cirrus driver maintains plane state, format and pitch, in it's
device structure. Introduce a plane state for the primary plane to
store the values.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-16-tzimmermann@suse.de
|
|
Inline the framebuffer size check into the primary plane's atomic_check
cirrus_primary_plane_atomic_check(). No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-15-tzimmermann@suse.de
|
|
Test a display mode against the available amount of video memory in
struct drm_mode_config_funcs.mode_valid, which cirrus implements in
cirrus_mode_config_mode_valid(). This helper tests display modes against
device-wide limits. Remove the now-obsolete per-CRTC test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-14-tzimmermann@suse.de
|
|
The DRM core implements a size check against the mode config's
limits when creating a framebuffer. [1] Remove the unnecessary
test from cirrus_fb_create() and remove the now-empty function.
Create framebuffers with drm_gem_fb_create_with_dirty().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.1/source/drivers/gpu/drm/drm_framebuffer.c#L287 # [1]
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-13-tzimmermann@suse.de
|
|
The DRM core implements a format check when setting a framebuffer
for a plane. [1] Remove the unnecessary test from cirrus_fb_create().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://elixir.bootlin.com/linux/v6.1/source/drivers/gpu/drm/drm_atomic.c#L629 # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-12-tzimmermann@suse.de
|
|
Inline cirrus_fb_blit_rect into its only caller. While at it, update
the code to use IOSYS_MAP_INIT_OFFSET(), which is the ideomatic way
of initializing struct iosys_map with an offset.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-11-tzimmermann@suse.de
|
|
Enable damage clipping on the primary plane and iterate over small
areas of reported framebuffer damage. Avoid the overhead of permanent
full-screen updates that cirrus currently implements.
This problem is indicated by the warning
drm_plane_enable_fb_damage_clips() not called
in the kernel's log. Without damage clipping, drivers do full updates
of the screen area. This is costly as many screen updates, such as
cursor movement or command-line input, only change a small portion
of the output. Damage clipping allows renderers to inform drivers about
the changed areas.
With the damage information known, cirrus now iterates over a list of
change areas and only flushes those to the hardware's scanout buffer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-10-tzimmermann@suse.de
|
|
Replace simple-KMS helpers with DRM's regular helpers for atomic
modesetting. Avoids the mid-layer and the additional wrappers around
GEM's shadow-plane helpers.
Most of the simple-KMS code is just wrappers around regular atomic
helpers. The conversion is therefore equivalent to pulling the
simple-KMS helpers into cirrus and removing all the intermediate
code and data structures between the driver and the atomic helpers.
As the simple-KMS helpers lump primary plan, CRTC and encoder into a
single data structure, the conversion to regular helpers allows to
split modesetting from plane updates and handle each individually.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-9-tzimmermann@suse.de
|
|
Move the primary plane's format and modifier arrays within the
source file and adapt naming slightly. No functional changes.
Done in preparation of converting cirrus to regular atomic helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-8-tzimmermann@suse.de
|
|
Integrate the connector with the rest of the pipeline setup code.
Move some helpers within the file and adapt naming slightly. No
functional changes.
Done in preparation of converting cirrus to regular atomic helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-7-tzimmermann@suse.de
|
|
Split cirrus_mode_set() into smaller functions that set the display
mode, color format and scnaline pitch individually. Better reflects
the design of the DRM modesetting pipeline.
Done in preparation of converting cirrus to regular atomic helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-6-tzimmermann@suse.de
|
|
Call drm_dev_enter() and drm_dev_exit() immediately after entering
cirrus' DRM helper functions. Remove these calls from other functions.
Each enter/exit block in the DRM helpers covers the full hardware
update. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-5-tzimmermann@suse.de
|
|
Cirrus' blit helper reimplements code from the shared blit helper
drm_fb_blit(). Use the helper instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-4-tzimmermann@suse.de
|
|
Using components per pixel to describe a color format is obsolete.
Use the format info and 4CC value instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-3-tzimmermann@suse.de
|
|
The calculation for the scanout-buffer blit offset is independent
from the color format. In the one case where the current code uses
fb->pitches[0] instead of cirrus->pitch, their values are identical.
Hence merge all into a single line.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-2-tzimmermann@suse.de
|
|
Parse the width-mm and height-mm devicetree properties of the panel node,
and use this to set the DRM Display Mode instead of calculating it
based on a hardcoded DPI.
Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126182435.70544-2-rayyan@ansari.sh
|
|
The devm_memremap() function doesn't return NULL, it returns error
pointers.
Fixes: 9a10c7e6519b ("drm/simpledrm: Add support for system memory framebuffers")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9JHzImRcUaa0mi1@kili
|
|
Simple framebuffers can be set up in system memory, which cannot be
requested and/or I/O remapped using the I/O resource helpers. Add a
separate code path that obtains system memory framebuffers from the
reserved memory region referenced in the memory-region property.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-6-thierry.reding@gmail.com
|
|
The majority of the driver already uses struct iosys_map to encapsulate
accesses to I/O remapped vs. system memory. Accesses via the screen base
pointer still use __iomem annotations, which can lead to inconsistencies
and conflicts with subsequent patches.
Convert the screen base to a struct iosys_map as well for consistency
and to avoid these issues.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-5-thierry.reding@gmail.com
|
|
Replace the combination of bpp and depth with a single color-mode
argument. Handle special cases in simpledrm and ofdrm. Hard-code
XRGB8888 as fallback format for cases where no given format works.
The color-mode argument accepts the same values as the kernel's video
parameter. These are mostly bpp values between 1 and 32. The exceptions
are 15, which has a color depth of 15 and a bpp value of 16; and 32,
which has a color depth of 24 and a bpp value of 32.
v4:
* add back lost test for bpp_specified (Maira)
* add Fixes tag (Daniel)
v3:
* fix ofdrm build (Maxime)
v2:
* minimize changes (Daniel)
* use drm_driver_legacy_fb_format() (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Maíra Canal <mcanal@igalia.com> # vc4 and vkms
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 37c90d589dc0 ("drm/fb-helper: Fix single-probe color-format selection")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230106112324.22055-1-tzimmermann@suse.de
|
|
The DRM helper drm_fb_build_fourcc_list() creates a list of color
formats for primary planes of the generic drivers. Simplify the helper:
- It used to mix and filter native and emulated formats as provided
by the driver. Now the only emulated format is XRGB8888, which is
required as fallback by legacy software. Drop support for emulating
any other formats.
- Also convert alpha formats to their non-alpha counterparts. Generic
drivers don't support primary planes with alpha formats and some
DTs incorrectly advertise alpha channels for non-alpha hardware. So
only export non-alpha formats for primary planes.
With the simplified helper, scrap format lists of the affected generic
drivers. All they need is the firmware buffer's native format, from which
the helper creates the list of color formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-13-tzimmermann@suse.de
|
|
The pixel data for the ILI9486 is always 16-bits wide and it must be
sent over the SPI bus. When the controller is only able to deal with
8-bit transfers, this 16-bits data needs to be swapped before the
sending to account for the big endian bus, this is on the contrary not
needed when the SPI controller already supports 16-bits transfers.
The decision about swapping the pixel data or not is taken in the MIPI
DBI code by probing the controller capabilities: if the controller only
suppors 8-bit transfers the data is swapped, otherwise it is not.
This swapping/non-swapping is relying on the assumption that when the
controller does support 16-bit transactions then the data is sent
unswapped in 16-bits-per-word over SPI.
The problem with the ILI9486 driver is that it is forcing 8-bit
transactions also for controllers supporting 16-bits, violating the
assumption and corrupting the pixel data.
Align the driver to what is done in the MIPI DBI code by adjusting the
transfer size to the maximum allowed by the SPI controller.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116-s905x_spi_ili9486-v4-2-f86b4463b9e4@baylibre.com
|
|
SPI devices use the spi_device_id for module autoloading even on
systems using device tree.
Add the spi_device_id entry to enable autoloading for the 3.5inch RPi
Display (rpi-lcd-35 and piscreen).
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116-s905x_spi_ili9486-v4-1-f86b4463b9e4@baylibre.com
|
|
To support platforms with a separate I/O voltage supply, set the new
io_regulator property along with the regulator property of the DBI
device. Read the I/O supply from a new "io-supply" device tree
property.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201160245.2093816-3-otto.pflueger@abscue.de
|
|
Use the pm_ptr() macro to handle the .suspend / .resume / .reset_resume
callbacks.
This macro allows the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_PM is disabled, without having
to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch. It also allows to drop the
__maybe_unused tags.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191942.138244-11-paul@crapouillou.net
|
|
Call drm_dev_enter() and drm_dev_exit() in the outer-most callbacks
of the modesetting pipeline. If drm_dev_enter() fails, the driver can
thus avoid unnecessary work.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org> # drm/tiny/mi0283qt
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-9-tzimmermann@suse.de
|
|
Use the buffer mappings provided by shadow-plane helpers. As the
mappings are established while the commit can still fail, errors
are now reported correctly to callers.
v2:
* use shadow-plane state directly (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org> # drm/tiny/mi0283qt
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-8-tzimmermann@suse.de
|
|
Implement MIPI DBI planes with struct drm_shadow_plane_state, so that the
respective drivers can use the vmap'ed GEM-buffer memory. Implement state
helpers, the {begin,end}_fb_access helpers and wire up everything.
With this commit, MIPI DBI drivers can access the GEM object's memory
that is provided by shadow-plane state. The actual changes to drivers
are implemented separately.
v2:
* use shadow-plane state directly (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org> # drm/tiny/mi0283qt
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-7-tzimmermann@suse.de
|
|
Move the vmap/vunmap blocks from the inner fb_dirty helpers into the
MIPI DBI update helpers. The function calls can result in waiting and/or
processing overhead. Reduce the penalties by executing the functions once
in the outer-most function of the pipe update.
This change also prepares for MIPI DBI for shadow-plane helpers. With
shadow-plane helpers, transfer source buffers are mapped into kernel
address space automatically.
v2:
* keep each driver's existing buffer-mapping patter (Noralf)
* zero-initialize iosys_map arrays (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org> # drm/tiny/mi0283qt
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-6-tzimmermann@suse.de
|
|
Introduce DRM_MIPI_DBI_SIMPLE_DISPLAY_PIPE_FUNCS to initialize MIPI-DBI
helpers to default values and convert drivers. The prepare_fb function
set by some drivers is called implicitly by simple-kms helpers, so leave
it out.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org> # drm/tiny/mi0283qt
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-5-tzimmermann@suse.de
|
|
MIPI DBI drivers validate each mode against their native resolution.
Add this test to st7586.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-4-tzimmermann@suse.de
|
|
MIPI DBI drivers validate each mode against their native resolution.
Add this test to ili9225.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-3-tzimmermann@suse.de
|
|
The helper drm_gem_simple_display_pipe_prepare_fb() is simple-KMS'
default implementation for prepare_fb. Remove the call from drivers
that set it explicitly. Then inline the helper into the only caller
within simple-kms helpers. No functional changes.
Simple-KMS drivers that implement the prepare_fb callback should call
drm_gem_plane_helper_prepare_fb() directly.
v2:
* fix typo in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-2-tzimmermann@suse.de
|
|
Set the preferred depth from the format of the scanout buffer. The
value cannot be hardcoded, as the scanout buffer is only known at
runtime. Also derive the fbdev emulation's bpp value from the scanout
format.
v2:
* fix commit-message typo
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-6-tzimmermann@suse.de
|
|
Set the preferred depth from the format of the scanout buffer. The
value cannot be hardcoded, as the scanout buffer is only known at
runtime. Keeping the existing switch statement just duplicates the
driver's existing logic for format detection.
Also remove the FIXME comment from the call to drm_fbdev_generic_setup()
as the driver now handles color depth and bpp values correctly.
v2:
* fix commit-message typo
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-5-tzimmermann@suse.de
|
|
Cirrus has a preferred color depth of 16 bit; also use it as fbdev
bpp value. Don't use the color depth directly. It has a different
meaning than bpp and both cannot be used interchangeably.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-4-tzimmermann@suse.de
|
|
Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.
v3:
* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
* rebase onto vmwgfx changes
* rebase onto xlnx changes
* fix include statements in amdgpu
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
|
|
Cast error pointers when returning them as void __iomem *. Fixes
a number of Sparse warnings, such as the ones shown below.
../drivers/gpu/drm/tiny/ofdrm.c:439:31: warning: incorrect type in return expression (different address spaces)
../drivers/gpu/drm/tiny/ofdrm.c:439:31: expected void [noderef] __iomem *
../drivers/gpu/drm/tiny/ofdrm.c:439:31: got void *
../drivers/gpu/drm/tiny/ofdrm.c:442:31: warning: incorrect type in return expression (different address spaces)
../drivers/gpu/drm/tiny/ofdrm.c:442:31: expected void [noderef] __iomem *
../drivers/gpu/drm/tiny/ofdrm.c:442:31: got void *
See [1] for the bug report.
v3:
* use IOMEM_ERR_PTR() (Javier)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/dri-devel/202210200016.yiQzPIy0-lkp@intel.com/ # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-3-tzimmermann@suse.de
|
|
Properties of 32-bit integers are returned from the OF device tree
as type __be32. Convert PCI vendor and device IDs from __be32 to host
endianness before comparing them to constants. All relevant machines
are old, big-endian Macintosh systems; hence the bug never happened
in practice.
Fixes sparse warnings shown below.
drivers/gpu/drm/tiny/ofdrm.c:237:17: warning: restricted __be32 degrades to integer
drivers/gpu/drm/tiny/ofdrm.c:238:18: warning: restricted __be32 degrades to integer
drivers/gpu/drm/tiny/ofdrm.c:238:54: warning: restricted __be32 degrades to integer
See [1] for the bug report.
v2:
* convert endianness (Alex)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/dri-devel/202210192208.D888I6X7-lkp@intel.com/ # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-2-tzimmermann@suse.de
|
|
Add a dependency on CONFIG_MMU to ofdrm. The driver uses GEM SHMEM
helpers, which require MMU support. A reported error message [1] is
shown below.
arm-linux-gnueabi-ld: drivers/gpu/drm/drm_gem_shmem_helper.o: in function `drm_gem_shmem_fault':
>> drivers/gpu/drm/drm_gem_shmem_helper.c:562: undefined reference to `vmf_insert_pfn'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: c8a17756c425 ("drm/ofdrm: Add ofdrm for Open Firmware framebuffers")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/dri-devel/202210192029.ZFeJvqjv-lkp@intel.com/ # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20221101104049.15601-1-tzimmermann@suse.de
|
|
The fb_base in struct drm_mode_config has been unused for a long time.
Some drivers set it and some don't leading to a very confusing state
where the variable can't be relied upon, because there's no indication
as to which driver sets it and which doesn't.
The only usage of fb_base is internal to two drivers so instead of trying
to force it into all the drivers to get it into a coherent state
completely remove it.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimemrmann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019024401.394617-1-zack@kde.org
|
|
All DRM formats assume little-endian byte order. On big-endian systems,
it is likely that the scanout buffer is in big endian as well. Update
the format accordingly and add endianness conversion to the format-helper
library. Also opt-in to allocated buffers in host format by default.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
|
|
Support the CRTC's color-management property and implement each model's
palette support.
The OF hardware has different methods of setting the palette. The
respective code has been taken from fbdev's offb and refactored into
per-model device functions. The device functions integrate this
functionality into the overall modesetting.
As palette handling is a CRTC property that depends on the primary
plane's color format, the plane's atomic_check helper now updates the
format field in ofdrm's custom CRTC state. The CRTC's atomic_flush
helper updates the palette for the format as needed.
v4:
* use cpu_to_be32() (Geert)
v3:
* lookup CRTC state with drm_atomic_get_new_crtc_state()
* access HW palette with writeb(), writel(), and readl() (Ben)
* declare register values as u32
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
|
|
Add a per-model device-function structure in preparation of adding
color-management support. Detection of the individual models has been
taken from fbdev's offb.
v3:
* define constants for PCI ids (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
|