Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull drm fixes from Dave Airlie:
"Fixes from the last week (or 3 weeks in amdgpu case), after amdgpu,
it's xe and nouveau then a few scattered core fixes.
core:
- fix rounding in drm_fixp2int_round()
bridge:
- fix documentation for DRM_BRIDGE_OP_EDID
sun4i:
- fix 64-bit division on 32-bit architectures
tests:
- fix dependency on DRM_KMS_HELPER
probe-helper:
- never return negative values from .get_modes() plus driver fixes
xe:
- invalidate userptr vma on page pin fault
- fail early on sysfs file creation error
- skip VMA pinning on xe_exec if no batches
nouveau:
- clear bo resource bus after eviction
- documentation fixes
- don't check devinit disable on GSP
amdgpu:
- Freesync fixes
- UAF IOCTL fixes
- Fix mmhub client ID mapping
- IH 7.0 fix
- DML2 fixes
- VCN 4.0.6 fix
- GART bind fix
- GPU reset fix
- SR-IOV fix
- OD table handling fixes
- Fix TA handling on boards without display hardware
- DML1 fix
- ABM fix
- eDP panel fix
- DPPCLK fix
- HDCP fix
- Revert incorrect error case handling in ioremap
- VPE fix
- HDMI fixes
- SDMA 4.4.2 fix
- Other misc fixes
amdkfd:
- Fix duplicate BO handling in process restore"
* tag 'drm-next-2024-03-22' of https://gitlab.freedesktop.org/drm/kernel: (50 commits)
drm/amdgpu/pm: Don't use OD table on Arcturus
drm/amdgpu: drop setting buffer funcs in sdma442
drm/amd/display: Fix noise issue on HDMI AV mute
drm/amd/display: Revert Remove pixle rate limit for subvp
Revert "drm/amdgpu/vpe: don't emit cond exec command under collaborate mode"
Revert "drm/amd/amdgpu: Fix potential ioremap() memory leaks in amdgpu_device_init()"
drm/amd/display: Add a dc_state NULL check in dc_state_release
drm/amd/display: Return the correct HDCP error code
drm/amd/display: Implement wait_for_odm_update_pending_complete
drm/amd/display: Lock all enabled otg pipes even with no planes
drm/amd/display: Amend coasting vtotal for replay low hz
drm/amd/display: Fix idle check for shared firmware state
drm/amd/display: Update odm when ODM combine is changed on an otg master pipe with no plane
drm/amd/display: Init DPPCLK from SMU on dcn32
drm/amd/display: Add monitor patch for specific eDP
drm/amd/display: Allow dirty rects to be sent to dmub when abm is active
drm/amd/display: Override min required DCFCLK in dml1_validate
drm/amdgpu: Bypass display ta if display hw is not available
drm/amdgpu: correct the KGQ fallback message
drm/amdgpu/pm: Check the validity of overdiver power limit
...
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.9-2024-03-21:
amdgpu:
- Freesync fixes
- UAF IOCTL fixes
- Fix mmhub client ID mapping
- IH 7.0 fix
- DML2 fixes
- VCN 4.0.6 fix
- GART bind fix
- GPU reset fix
- SR-IOV fix
- OD table handling fixes
- Fix TA handling on boards without display hardware
- DML1 fix
- ABM fix
- eDP panel fix
- DPPCLK fix
- HDCP fix
- Revert incorrect error case handling in ioremap
- VPE fix
- HDMI fixes
- SDMA 4.4.2 fix
- Other misc fixes
amdkfd:
- Fix duplicate BO handling in process restore
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240321220514.1418288-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Short summary of fixes pull:
core:
- fix rounding in drm_fixp2int_round()
bridge:
- fix documentation for DRM_BRIDGE_OP_EDID
nouveau:
- don't check devinit disable on GSP
sun4i:
- fix 64-bit division on 32-bit architectures
tests:
- fix dependency on DRM_KMS_HELPER
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240321161948.GA30430@linux.fritz.box
|
|
OD is not supported on Arcturus, so the OD table
should not be used.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To fix the entity rq NULL issue. This setting has been moved
to upper level.
Fixes: b70438004a14 ("drm/amdgpu: move buffer funcs setting up a level")
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When mode switching is triggered there is momentary noise visible on
some HDMI TV or displays.
[How]
Wait for 2 frames to make sure we have enough time to send out AV mute
and sink receives a full frame.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 340383c734f8 ("drm/amd/display: Remove pixle rate
limit for subvp")
[why]
The original commit causes a regression when subvp is applied
on ODM required 8k60hz timing. The display shows black screen
on boot. The issue can be recovered with hotplug. It also causes
MPO to fail. We will temprarily revert this commit and investigate
the root cause further.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Ready now. Remove this workaround.
This reverts commit d40f6213b52c161fd4634933acbc32103a283363.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Tested-by: Alan Liu <haoping.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_device_init()"
This patch causes the following iounmap erorr and calltrace
iounmap: bad address 00000000d0b3631f
The original patch was unjustified because amdgpu_device_fini_sw() will
always cleanup the rmmio mapping.
This reverts commit eb4f139888f636614dab3bcce97ff61cefc4b3a7.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[How]
Check wheather state is NULL before releasing it.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Allen Pan <allen.pan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
If the display is null when creating an HDCP session, return a proper
error code.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Odm update is doubled buffered. We need to wait for ODM update to be
completed before optimizing bandwidth or programming new udpates.
[HOW]
implement wait_for_odm_update_pending_complete function to wait for:
1. odm configuration update is no longer pending in timing generator.
2. no pending dpg pattern update for each active OPP.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
On DCN32 we support dynamic ODM even when OTG is blanked. When ODM
configuration is dynamically changed and the OTG is on blank pattern,
we will need to reprogram OPP's test pattern based on new ODM
configuration. Therefore we need to lock the OTG pipe to avoid temporary
corruption when we are reprogramming OPP blank patterns.
[HOW]
Add a new interdependent update lock implementation to lock all enabled
OTG pipes even when there is no plane on the OTG for DCN32.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
The original coasting vtotal is 2 bytes, and it need to
be amended to 4 bytes because low hz case.
[HOW]
Amend coasting vtotal from 2 bytes to 4 bytes.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
We still had an instance of get_idle_state checking the PMFW scratch
register instead of the actual idle allow signal.
[HOW]
Replace it with the SW state check for whether we had allowed idle
through notify_idle.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
pipe with no plane
[WHY]
When committing an update with ODM combine change when the plane is
removing or already removed, we fail to detect odm change in pipe
update flags. This has caused mismatch between new dc state and the
actual hardware state, because we missed odm programming.
[HOW]
- Detect odm change even for otg master pipe without a plane.
- Update odm config before calling program pipes for pipe with planes.
The commit also updates blank pattern programming when odm is changed
without plane. This is because number of OPP is changed when ODM
combine is changed. Blank pattern is per OPP so we will need to
reprogram OPP based on the new pipe topology.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
DPPCLK ranges should be obtained from the SMU when available.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Some eDP panels' ext caps don't write initial values. The value of
dpcd_addr (0x317) can be random and the backlight control interface
will be incorrect.
[HOW]
Add new panel patches to remove sink ext caps.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.5.x
Cc: Tsung-hua Lin <tsung-hua.lin@amd.com>
Cc: Chris Chi <moukong.chi@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
It's beneficial for ABM to know when new frame data are available.
[HOW]
Add new condition to allow dirty rects to be sent to DMUB when ABM is
active. ABM will use this as a signal that a new frame has arrived.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Josip Pavic <josip.pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]:
Increasing min DCFCLK addresses underflow issues that occur when phantom
pipe is turned on for some Sub-Viewport configs
[HOW]:
dcn32_override_min_req_dcfclk is added to override DCFCLK value in
dml1_validate when subviewport is being used.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Do not load/invoke display TA if display hardware
is not available.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the KGQ fallback function name, as this will
help differentiate the failure in the KCQ enablement.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check the validity of overdriver power limit before using it.
Fixes: 7968e9748fbb ("drm/amdgpu/pm: Fix the power1_min_cap value")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Suggested-by: Lazar Lijo <lijo.lazar@amd.com>
Suggested-by: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Because powerplay_table initialization is skipped under
sriov case, We check and set default lower and upper OD
value if powerplay_table is NULL.
Fixes: 7968e9748fbb ("drm/amdgpu/pm: Fix the power1_min_cap value")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reported-by: Yin Zhenguo <zhenguo.yin@amd.com>
Suggested-by: Lazar Lijo <lijo.lazar@amd.com>
Suggested-by: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
RLCG interface returns "out-of-range" error under SRIOV VF when accessing
PF-only registers.
[How]
Skip access PF-only registers on gfx10/gfxhub2_1 under SRIOV.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In passthrough environment, when amdgpu is reloaded after unload, mode-1
is triggered after initializing the necessary IPs, That init does not
include KFD, and KFD init waits until the reset is completed. KFD init
is called in the reset handler, but in this case, the zone device and
drm client is not initialized, causing app to create kernel panic.
v2: Removing the init KFD condition from amdgpu_amdkfd_drm_client_create.
As the previous version has the potential of creating DRM client twice.
v3: v2 patch results in SDMA engine hung as DRM open causes VM clear to SDMA
before SDMA init. Adding the condition to in drm client creation, on top of v1,
to guard against drm client creation call multiple times.
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise after the GTT bo is released, the GTT and gart space is freed
but amdgpu_ttm_backend_unbind will not clear the gart page table entry
and leave valid mapping entry pointing to the stale system page. Then
if GPU access the gart address mistakely, it will read undefined value
instead page fault, harder to debug and reproduce the real issue.
Cc: stable@vger.kernel.org
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1 - update the fw header for each vcn instance (Veera)
VCN1 has different FW binary in VCN v4_0_6.
Add changes to load the VCN1 fw binary
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Enable DML2 related debug config options in DM for testing purposes.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Currently, to map dc states into dml_display_cfg,
We create a dummy plane if the stream doesn't have any planes
attached to it. This dummy plane uses max addersable width height.
This results in certain mode validations failing when they shouldn't.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
IH 7.0 support landed shortly after the original patch for resetting the
bit on all other generations, but without that patch applied.
Fixes: 12443fc53e7d ("drm/amdgpu: Add ih v7_0 ip block support")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Properly handle cid 0x140.
Fixes: aba2be41470a ("drm/amdgpu: add mmhub 3.3.0 support")
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The bug can be triggered by sending a single amdgpu_gem_userptr_ioctl
to the AMDGPU DRM driver on any ASICs with an invalid address and size.
The bug was reported by Joonkyo Jung <joonkyoj@yonsei.ac.kr>.
For example the following code:
static void Syzkaller1(int fd)
{
struct drm_amdgpu_gem_userptr arg;
int ret;
arg.addr = 0xffffffffffff0000;
arg.size = 0x80000000; /*2 Gb*/
arg.flags = 0x7;
ret = drmIoctl(fd, 0xc1186451/*amdgpu_gem_userptr_ioctl*/, &arg);
}
Due to the address and size are not valid there is a failure in
amdgpu_hmm_register->mmu_interval_notifier_insert->__mmu_interval_notifier_insert->
check_shl_overflow, but we even the amdgpu_hmm_register failure we still call
amdgpu_hmm_unregister into amdgpu_gem_object_free which causes access to a bad address.
The following stack is below when the issue is reproduced when Kazan is enabled:
[ +0.000014] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020
[ +0.000009] RIP: 0010:mmu_interval_notifier_remove+0x327/0x340
[ +0.000017] Code: ff ff 49 89 44 24 08 48 b8 00 01 00 00 00 00 ad de 4c 89 f7 49 89 47 40 48 83 c0 22 49 89 47 48 e8 ce d1 2d 01 e9 32 ff ff ff <0f> 0b e9 16 ff ff ff 4c 89 ef e8 fa 14 b3 ff e9 36 ff ff ff e8 80
[ +0.000014] RSP: 0018:ffffc90002657988 EFLAGS: 00010246
[ +0.000013] RAX: 0000000000000000 RBX: 1ffff920004caf35 RCX: ffffffff8160565b
[ +0.000011] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffff8881a9f78260
[ +0.000010] RBP: ffffc90002657a70 R08: 0000000000000001 R09: fffff520004caf25
[ +0.000010] R10: 0000000000000003 R11: ffffffff8161d1d6 R12: ffff88810e988c00
[ +0.000010] R13: ffff888126fb5a00 R14: ffff88810e988c0c R15: ffff8881a9f78260
[ +0.000011] FS: 00007ff9ec848540(0000) GS:ffff8883cc880000(0000) knlGS:0000000000000000
[ +0.000012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000010] CR2: 000055b3f7e14328 CR3: 00000001b5770000 CR4: 0000000000350ef0
[ +0.000010] Call Trace:
[ +0.000006] <TASK>
[ +0.000007] ? show_regs+0x6a/0x80
[ +0.000018] ? __warn+0xa5/0x1b0
[ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340
[ +0.000018] ? report_bug+0x24a/0x290
[ +0.000022] ? handle_bug+0x46/0x90
[ +0.000015] ? exc_invalid_op+0x19/0x50
[ +0.000016] ? asm_exc_invalid_op+0x1b/0x20
[ +0.000017] ? kasan_save_stack+0x26/0x50
[ +0.000017] ? mmu_interval_notifier_remove+0x23b/0x340
[ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340
[ +0.000019] ? mmu_interval_notifier_remove+0x23b/0x340
[ +0.000020] ? __pfx_mmu_interval_notifier_remove+0x10/0x10
[ +0.000017] ? kasan_save_alloc_info+0x1e/0x30
[ +0.000018] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? __kasan_kmalloc+0xb1/0xc0
[ +0.000018] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? __kasan_check_read+0x11/0x20
[ +0.000020] amdgpu_hmm_unregister+0x34/0x50 [amdgpu]
[ +0.004695] amdgpu_gem_object_free+0x66/0xa0 [amdgpu]
[ +0.004534] ? __pfx_amdgpu_gem_object_free+0x10/0x10 [amdgpu]
[ +0.004291] ? do_syscall_64+0x5f/0xe0
[ +0.000023] ? srso_return_thunk+0x5/0x5f
[ +0.000017] drm_gem_object_free+0x3b/0x50 [drm]
[ +0.000489] amdgpu_gem_userptr_ioctl+0x306/0x500 [amdgpu]
[ +0.004295] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu]
[ +0.004270] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? __this_cpu_preempt_check+0x13/0x20
[ +0.000015] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? sysvec_apic_timer_interrupt+0x57/0xc0
[ +0.000020] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20
[ +0.000022] ? drm_ioctl_kernel+0x17b/0x1f0 [drm]
[ +0.000496] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu]
[ +0.004272] ? drm_ioctl_kernel+0x190/0x1f0 [drm]
[ +0.000492] drm_ioctl_kernel+0x140/0x1f0 [drm]
[ +0.000497] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu]
[ +0.004297] ? __pfx_drm_ioctl_kernel+0x10/0x10 [drm]
[ +0.000489] ? srso_return_thunk+0x5/0x5f
[ +0.000011] ? __kasan_check_write+0x14/0x20
[ +0.000016] drm_ioctl+0x3da/0x730 [drm]
[ +0.000475] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu]
[ +0.004293] ? __pfx_drm_ioctl+0x10/0x10 [drm]
[ +0.000506] ? __pfx_rpm_resume+0x10/0x10
[ +0.000016] ? srso_return_thunk+0x5/0x5f
[ +0.000011] ? __kasan_check_write+0x14/0x20
[ +0.000010] ? srso_return_thunk+0x5/0x5f
[ +0.000011] ? _raw_spin_lock_irqsave+0x99/0x100
[ +0.000015] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ +0.000014] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000011] ? srso_return_thunk+0x5/0x5f
[ +0.000011] ? preempt_count_sub+0x18/0xc0
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000010] ? _raw_spin_unlock_irqrestore+0x27/0x50
[ +0.000019] amdgpu_drm_ioctl+0x7e/0xe0 [amdgpu]
[ +0.004272] __x64_sys_ioctl+0xcd/0x110
[ +0.000020] do_syscall_64+0x5f/0xe0
[ +0.000021] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ +0.000015] RIP: 0033:0x7ff9ed31a94f
[ +0.000012] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[ +0.000013] RSP: 002b:00007fff25f66790 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ +0.000016] RAX: ffffffffffffffda RBX: 000055b3f7e133e0 RCX: 00007ff9ed31a94f
[ +0.000012] RDX: 000055b3f7e133e0 RSI: 00000000c1186451 RDI: 0000000000000003
[ +0.000010] RBP: 00000000c1186451 R08: 0000000000000000 R09: 0000000000000000
[ +0.000009] R10: 0000000000000008 R11: 0000000000000246 R12: 00007fff25f66ca8
[ +0.000009] R13: 0000000000000003 R14: 000055b3f7021ba8 R15: 00007ff9ed7af040
[ +0.000024] </TASK>
[ +0.000007] ---[ end trace 0000000000000000 ]---
v2: Consolidate any error handling into amdgpu_hmm_register
which applied to kfd_bo also. (Christian)
v3: Improve syntax and comment (Christian)
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Joonkyo Jung <joonkyoj@yonsei.ac.kr>
Cc: Dokyung Song <dokyungs@yonsei.ac.kr>
Cc: <jisoo.jang@yonsei.ac.kr>
Cc: <yw9865@yonsei.ac.kr>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In certain situations, some apps can import a BO multiple times
(through IPC for example). To restore such processes successfully,
we need to tell drm to ignore duplicate BOs.
While at it, also add additional logging to prevent silent failures
when process restore fails.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The monitor shipped with the Framework 16 supports VRR [1], but it's not
being advertised.
This is because the detailed timing block doesn't contain
`EDID_DETAIL_MONITOR_RANGE` which amdgpu looks for to find min and max
frequencies. This check however is superfluous for this case because
update_display_info() calls drm_get_monitor_range() to get these ranges
already.
So if the `DRM_EDID_FEATURE_CONTINUOUS_FREQ` EDID feature is found then
turn on freesync without extra checks.
v2: squash in fix from Harry
Closes: https://www.reddit.com/r/framework/comments/1b4y2i5/no_variable_refresh_rate_on_the_framework_16_on/
Closes: https://www.reddit.com/r/framework/comments/1b6vzcy/framework_16_variable_refresh_rate/
Closes: https://community.frame.work/t/resolved-no-vrr-freesync-with-amd-version/42338
Link: https://gist.github.com/superm1/e8fbacfa4d0f53150231d3a3e0a13faf
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GSP should be handling this and I can see no evidence in opengpu
driver that this register should be touched.
Fixed acceleration on 2080 Ti GPUs.
Fixes: 15740541e8f0 ("drm/nouveau/devinit/tu102-: prepare for GSP-RM")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314014521.2695233-1-airlied@gmail.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Short summary of fixes pull:
probe-helper:
- never return negative values from .get_modes() plus driver fixes
nouveau:
- clear bo resource bus after eviction
- documentation fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314082833.GA8761@localhost.localdomain
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver changes:
- Invalidate userptr VMA on page pin fault, allowing userspace
to free userptr while still having bindings
- Fail early on sysfs file creation error
- Skip VMA pinning on xe_exec with num_batch_buffer == 0
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c4epi2j6anpc77z73zbgibxg7bxsmmkb522aa7tyei6oa6uunn@3oad4cgomd5a
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"Main user visible change:
- User events can now have "multi formats"
The current user events have a single format. If another event is
created with a different format, it will fail to be created. That
is, once an event name is used, it cannot be used again with a
different format. This can cause issues if a library is using an
event and updates its format. An application using the older format
will prevent an application using the new library from registering
its event.
A task could also DOS another application if it knows the event
names, and it creates events with different formats.
The multi-format event is in a different name space from the single
format. Both the event name and its format are the unique
identifier. This will allow two different applications to use the
same user event name but with different payloads.
- Added support to have ftrace_dump_on_oops dump out instances and
not just the main top level tracing buffer.
Other changes:
- Add eventfs_root_inode
Only the root inode has a dentry that is static (never goes away)
and stores it upon creation. There's no reason that the thousands
of other eventfs inodes should have a pointer that never gets set
in its descriptor. Create a eventfs_root_inode desciptor that has a
eventfs_inode descriptor and a dentry pointer, and only the root
inode will use this.
- Added WARN_ON()s in eventfs
There's some conditionals remaining in eventfs that should never be
hit, but instead of removing them, add WARN_ON() around them to
make sure that they are never hit.
- Have saved_cmdlines allocation also include the map_cmdline_to_pid
array
The saved_cmdlines structure allocates a large amount of data to
hold its mappings. Within it, it has three arrays. Two are already
apart of it: map_pid_to_cmdline[] and saved_cmdlines[]. More memory
can be saved by also including the map_cmdline_to_pid[] array as
well.
- Restructure __string() and __assign_str() macros used in
TRACE_EVENT()
Dynamic strings in TRACE_EVENT() are declared with:
__string(name, source)
And assigned with:
__assign_str(name, source)
In the tracepoint callback of the event, the __string() is used to
get the size needed to allocate on the ring buffer and
__assign_str() is used to copy the string into the ring buffer.
There's a helper structure that is created in the TRACE_EVENT()
macro logic that will hold the string length and its position in
the ring buffer which is created by __string().
There are several trace events that have a function to create the
string to save. This function is executed twice. Once for
__string() and again for __assign_str(). There's no reason for
this. The helper structure could also save the string it used in
__string() and simply copy that into __assign_str() (it also
already has its length).
By using the structure to store the source string for the
assignment, it means that the second argument to __assign_str() is
no longer needed.
It will be removed in the next merge window, but for now add a
warning if the source string given to __string() is different than
the source string given to __assign_str(), as the source to
__assign_str() isn't even used and will be going away.
- Added checks to make sure that the source of __string() is also the
source of __assign_str() so that it can be safely removed in the
next merge window.
Included fixes that the above check found.
- Other minor clean ups and fixes"
* tag 'trace-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits)
tracing: Add __string_src() helper to help compilers not to get confused
tracing: Use strcmp() in __assign_str() WARN_ON() check
tracepoints: Use WARN() and not WARN_ON() for warnings
tracing: Use div64_u64() instead of do_div()
tracing: Support to dump instance traces by ftrace_dump_on_oops
tracing: Remove second parameter to __assign_rel_str()
tracing: Add warning if string in __assign_str() does not match __string()
tracing: Add __string_len() example
tracing: Remove __assign_str_len()
ftrace: Fix most kernel-doc warnings
tracing: Decrement the snapshot if the snapshot trigger fails to register
tracing: Fix snapshot counter going between two tracers that use it
tracing: Use EVENT_NULL_STR macro instead of open coding "(null)"
tracing: Use ? : shortcut in trace macros
tracing: Do not calculate strlen() twice for __string() fields
tracing: Rework __assign_str() and __string() to not duplicate getting the string
cxl/trace: Properly initialize cxl_poison region name
net: hns3: tracing: fix hclgevf trace event strings
drm/i915: Add missing ; to __assign_str() macros in tracepoint code
NFSD: Fix nfsd_clid_class use of __string_len() macro
...
|
|
I'm working on improving the __assign_str() and __string() macros to be
more efficient, and removed some unneeded semicolons. This triggered a bug
in the build as some of the __assign_str() macros in intel_display_trace
was missing a terminating semicolon.
Link: https://lore.kernel.org/linux-trace-kernel/20240222133057.2af72a19@gandalf.local.home
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 2ceea5d88048b ("drm/i915: Print plane name in fbc tracepoints")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Commit 66671944e176 ("drm/tests: helpers: Add atomic helpers")
introduced a dependency on CRTC helpers in KUnit test helpers.
Select the former when building KUnit test helpers to avoid
linker errors.
Fixes: 66671944e176 ("drm/tests: helpers: Add atomic helpers")
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Link: https://lore.kernel.org/r/20240313142142.1318718-1-karolina.stolarek@intel.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
|
|
Doing a XE_EXEC with num_batch_buffer == 0 makes signals passed as
argument to be signaled when the last real XE_EXEC is completed.
But to do that it was first pinning all VMAs in drm_gpuvm_exec_lock(),
this patch remove this pinning as it is not required.
This change also help Mesa implementing memory over-commiting recovery
as it needs to unbind not needed VMAs when the whole VM can't fit
in GPU memory but it can only do the unbiding when the last XE_EXEC
is completed.
So with this change Mesa can get the signal it want without getting
out-of-memory errors.
Fixes: eb9702ad2986 ("drm/xe: Allow num_batch_buffer / num_binds == 0 in IOCTLs")
Cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313171318.121066-1-jose.souza@intel.com
(cherry picked from commit 58480c1c912ff8146d067301a0d04cca318b4a66)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Return after warning regarding kobj creation failure.
Fixes: 4ae3aeab32d7 ("drm/xe: Add vram frequency sysfs attributes")
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313150545.2830408-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 989d07ac6bb7d269e975f85e8f683f496faa0380)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Rather than return an error to the user or ban the VM when userptr VMA
page pin fails with -EFAULT, invalidate VMA mappings. This supports the
UMD use case of freeing userptr while still having bindings.
Now that non-faulting VMs can invalidate VMAs, drop the usm prefix for
the tile_invalidated member.
v2:
- Fix build error (CI)
v3:
- Don't invalidate VMA if in fault mode, rather kill VM (Thomas)
- Update commit message with tile_invalidated name chagne (Thomas)
- Wait VM bookkeep slots with VM resv lock (Thomas)
v4:
- Move list_del_init(&userptr.repin_link) after error check (Thomas)
- Assert not in fault mode (Matthew)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312183907.933835-1-matthew.brost@intel.com
(cherry picked from commit 521db22a1d70dbc596a07544a738416025b1b63c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Commit 358e76fd613a ("drm/sun4i: hdmi: Consolidate atomic_check and
mode_valid") changed the clock rate from an unsigned long to an unsigned
long long resulting in a a 64-bit division that might not be supported
on all platforms.
The resulted in compilation being broken at least for m68k, xtensa and
some arm configurations, at least.
Fixes: 358e76fd613a ("drm/sun4i: hdmi: Consolidate atomic_check and mode_valid")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/r/CA+G9fYvG9KE15PGNoLu+SBVyShe+u5HBLQ81+kK9Zop6u=ywmw@mail.gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403011839.KLiXh4wC-lkp@intel.com/
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20240304091225.366325-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Pull drm updates from Dave Airlie:
"Highlights are usual, more AMD IP blocks for future hw, i915/xe
changes, Displayport tunnelling support for i915, msm YUV over DP
changes, new tests for ttm, but its mostly a lot of stuff all over the
place from lots of people.
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync
in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by
hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support"
* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
drm/amd/pm: wait for completion of the EnableGfxImu message
drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
drm/amdgpu: add smu 14.0.1 support
drm/amdgpu: add VPE 6.1.1 discovery support
drm/amdgpu/vpe: add VPE 6.1.1 support
drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
drm/amdgpu/vpe: add collaborate mode support for VPE
drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
drm/amdgpu/vpe: add multi instance VPE support
drm/amdgpu/discovery: add nbif v6_3_1 ip block
drm/amdgpu: Add nbif v6_3_1 ip block support
drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
arch/powerpc: Remove <linux/fb.h> from backlight code
macintosh/via-pmu-backlight: Include <linux/backlight.h>
fbdev/chipsfb: Include <linux/backlight.h>
drm/etnaviv: Restore some id values
drm/amdkfd: make kfd_class constant
drm/amdgpu: add ring timeout information in devcoredump
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains the usual amount of driver and device tree changes.
Additionally there is a big rework of how pwm lowlevel drivers are
registered to prepare adding character device support.
Thanks to Dharma Balasubiramani, Dong Aisheng, Duje Mihanović, Jerome
Brunet, Raag Jadav and Rafał Miłecki for their contributions. And
sorry for those who still need some patience because I didn't manage
to empty my review queue"
* tag 'pwm/for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (185 commits)
pwm: imx-tpm: fix probe crash due to access registers without clock
pwm: meson: generalize 4 inputs clock on meson8 pwm type
dt-bindings: pwm: amlogic: Add a new binding for meson8 pwm types
dt-bindings: pwm: amlogic: fix s4 bindings
pwm: dwc: simplify error handling
pwm: dwc: Add 16 channel support for Intel Elkhart Lake
pwm: dwc: drop redundant error check
staging: greybus: pwm: Make use of devm_pwmchip_alloc() function
staging: greybus: pwm: Rework how the number of PWM lines is determined
staging: greybus: pwm: Drop unused gb_connection_set_data()
staging: greybus: pwm: Rely on pwm framework to pass a valid hwpwm
staging: greybus: pwm: Make use of pwmchip_parent() accessor
staging: greybus: pwm: Change prototype of helpers to prepare further changes
leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of pwmchip_parent() accessor
gpio: mvebu: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Prepare removing pwm_chip from driver data
pwm: vt8500: Make use of devm_pwmchip_alloc() function
...
|
|
Just use 0 and 1 directly, instead of the confusing local variable
that's always set to 0.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/64cc680f14d961cedb726a6fd5c6dfd53ca9bb85.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|