summaryrefslogtreecommitdiff
path: root/drivers/hid/hid-ids.h
AgeCommit message (Collapse)AuthorFilesLines
2015-09-27HID: usbhid: add Chicony/Pixart usb optical mouse that needs QUIRK_ALWAYS_POLLHerton R. Krzesinski1-0/+1
[ Upstream commit 7250dc3fee806eb2b7560ab7d6072302e7ae8cf8 ] I received a report from an user of following mouse which needs this quirk: usb 1-1.6: USB disconnect, device number 58 usb 1-1.6: new low speed USB device number 59 using ehci_hcd usb 1-1.6: New USB device found, idVendor=04f2, idProduct=1053 usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.6: Product: USB Optical Mouse usb 1-1.6: Manufacturer: PixArt usb 1-1.6: configuration #1 chosen from 1 choice input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input5887 generic-usb 0003:04F2:1053.16FE: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.0-1.6/input0 The quirk was tested by the reporter and it fixed the frequent disconnections etc. [jkosina@suse.cz: reorder the position in hid-ids.h] Signed-off-by: Herton R. Krzesinski <herton@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-08-27HID: do not bind to Microchip Pick16F1454Kristian Evensen1-0/+1
[ Upstream commit a8c8316b11594e616df641b4b19ec9da732f93df ] The Microchip Pick16F1454 is exported as a HID device and is used by for example the Yepkit YKUSH three-port switchable USB hub. However, it is not an actual HID-device. On the Yepkit, it is used to power up/down the ports on the hub. The HID driver should ignore this device. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-08-27[media] si4713: HID blacklist Si4713 USB development boardDinesh Ram1-0/+2
[ Upstream commit adc232592337d3ac4c5473ba8bdaf7c202bf215d ] The Si4713 development board contains a Si4713 FM transmitter chip and is handled by the radio-usb-si4713 driver. The board reports itself as (10c4:8244) Cygnal Integrated Products, Inc. and misidentifies itself as a HID device in its USB interface descriptor. This patch ignores this device as an HID device and hence loads the custom driver. Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-08-27HID: tivo: enable all buttons on the TiVo Slide Pro remoteForest Wilkinson1-0/+1
[ Upstream commit 9b028649b9d0ae72090904629dad06b022f4ddc7 ] The linux kernel has supported the TiVo Slide remote control for some time, but does not recognize the USB ID of the newer Slide Pro. This patch adds the missing data structures so the newer remote will be recognized by the driver, thereby allowing the TiVo, LiveTV, and Thumbs Up/Down buttons to be mapped with a hwdb file. Signed-off-by: Forest Wilkinson <web11.forest@tibit.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-29HID: sony: Add support for the third-party SMK PS3 Bluetooth RemoteFrank Praznik1-0/+3
[ Upstream commit 68a49e51a4a9c500d950f893f1758c5ac13b7c8b ] Add vid/pid for the SMK branded third-party PS3 Bluetooth remote and enable support in the hid-sony driver. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-28HID: usbhid: Add HID_QUIRK_NOGET for Aten DVI KVM switchLaura Abbott1-0/+1
[ Upstream commit 849eca7b9dae0364e2fbe8afdf0fb610d12c9c8f ] Like other KVM switches, the Aten DVI KVM switch needs a quirk to avoid spewing errors: [791759.606542] usb 1-5.4: input irq status -75 received [791759.614537] usb 1-5.4: input irq status -75 received [791759.622542] usb 1-5.4: input irq status -75 received Add it. Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-28HID: usbhid: Add a quirk for raphnet multi-gamepad adaptersRaphael Assenat1-0/+7
[ Upstream commit d6ea2f88ac3659b799d8079a4fbda4f8faf6ff90 ] The raphnet.net 4nes4snes and 2nes2snes multi-joystick adapters use a single HID report descriptor with one report ID per controller. This has the effect that the inputs of otherwise independent game controllers get packed in one large joystick device. With this patch each controller gets its own /dev/input/jsX device, which is more natural and less confusing than having all inputs going to the same place. Signed-off-by: Raphael Assenat <raph@raphnet.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-28HID: usbhid: yet another mouse with ALWAYS_POLLOliver Neukum1-1/+2
[ Upstream commit 43faadfe96d3f049f4ae2c4090d2e57b9aafb995 ] The device exists with two device IDs instead of one as previously believed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-28HID: usbhid: more mice with ALWAYS_POLLOliver Neukum1-0/+4
[ Upstream commit 003e817a9ecf6cfded59630858bbf04056d71e9a ] During a stress test these mice kept dropping and reappearing in runlevel 1 as opposed to 5. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-28HID: add quirk for PIXART OEM mouse used by HPOliver Neukum1-0/+1
[ Upstream commit b70b82580248b5393241c986082842ec05a2b7d7 ] This mouse is also known under other IDs. It needs the quirk or will disconnect in runlevel 1 or 3. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-28HID: add HP OEM mouse to quirk ALWAYS_POLLOliver Neukum1-0/+3
[ Upstream commit 7a8e53c414c8183e8735e3b08d9a776200e6e665 ] This mouse needs QUIRK_ALWAYS_POLL. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-28HID: add ALWAYS_POLL quirk for a Logitech 0xc007oliver@neukum.org1-0/+1
[ Upstream commit a415457733b5fa40bc996bf1f4df471cd98d3608 ] This device disconnects every 60s without X Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-28HID: Introduce hidpp, a module to handle Logitech hid++ devicesBenjamin Tissoires1-0/+1
[ Upstream commit 2f31c52529103d8f0e1485272064f982d14ce54a ] Logitech devices use a vendor protocol to communicate various information with the device. This protocol is called HID++, and an exerpt can be found here: https://drive.google.com/folderview?id=0BxbRzx7vEV7eWmgwazJ3NUFfQ28&usp=shar The main difficulty which is related to this protocol is that it is a synchronous protocol using the input reports. So when we want to get some information from the device, we need to wait for a matching input report. This driver introduce this capabilities to be able to support the multitouch mode of the Logitech Wireless Touchpad T651 (the bluetooth one). The multitouch data is available directly from the mouse input reports, and we just need to query the device on connect about its caracteristics. HID++ and the touchpad features has a specific reporting mode which uses pure HID++ reports, but Logitech told us not to use it for this specific device. During QA, they detected that some bluetooth input reports where lost, and so the only supported mode is the pointer mode. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Andrew de los Reyes <adlr@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-28HID: microsoft: Add ID for NE7K wireless keyboardJakub Sitnicki1-0/+1
[ Upstream commit ef567cf9ddb682dbfa840bf4a2600931299f9555 ] Microsoft Natural Wireless Ergonomic Keyboard 7000 has special My Favorites 1..5 keys which are handled through a vendor-defined usage page (0xff05). Apply MS_ERGONOMY quirks handling to USB PID 0x071d (Microsoft Microsoft 2.4GHz Transceiver V1.0) so that the My Favorites 1..5 keys are reported as KEY_F14..18 events. Link: https://bugzilla.kernel.org/show_bug.cgi?id=52841 Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-28HID: saitek: add USB ID for older R.A.T. 7Darren Salt1-0/+1
[ Upstream commit afe98939b37933ee8c3d0b5c42199d624d0408a6 ] Signed-off-by: Darren Salt <devspam@moreofthesa.me.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-28HID: kye: Fix report descriptor for Genius PenSketch M912Milan Plzik1-0/+1
[ Upstream commit feb6faf1e5d46276c5430e36ffb4a6f62bf8d55b ] Genius PenSketch M912 digitizer tablet sends incorrect report descriptor by default. This patch replaces it with a corrected one. Signed-off-by: Milan Plzik <milan.plzik@gmail.com> Reviewed-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-01-16HID: Add a new id 0x501a for Genius MousePen i608XGiedrius Statkevičius1-0/+1
commit 2bacedada682d5485424f5227f27a3d5d6eb551c upstream. New Genius MousePen i608X devices have a new id 0x501a instead of the old 0x5011 so add a new #define with "_2" appended and change required places. The remaining two checkpatch warnings about line length being over 80 characters are present in the original files too and this patch was made in the same style (no line break). Just adding a new id and changing the required places should make the new device work without any issues according to the bug report in the following url. This patch was made according to and fixes: https://bugzilla.kernel.org/show_bug.cgi?id=67111 Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-16HID: yet another buggy ELAN touchscreenOliver Neukum1-0/+1
commit a32c99e7ab8410bae7c276a7e94ca84d108de034 upstream. The touchscreen needs the same quirk as the other models. Signed-off-by: Oliver Neukum <oneukum@suse.de> Reported-by: Bryan Poling <poli0048@umn.edu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-03HID: usbhid: enable always-poll quirk for Elan Touchscreen 0103Adel Gadllah1-0/+1
Yet another device that needs this quirk. Reported-by: Tanguy de Baritault <tdebaritault@gmail.com> Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-10HID: usbhid: enable always-poll quirk for Elan Touchscreen 016fAdel Gadllah1-0/+1
This device needs the quirk as well. Tested-by: Kevin Fenzi <kevin@scrye.com> Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-10HID: usbhid: enable always-poll quirk for Elan Touchscreen 009bAdel Gadllah1-0/+1
This device needs the quirk as well. Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-07Merge branches 'for-3.18/always-poll-quirk', 'for-3.18/logitech', ↵Jiri Kosina1-1/+8
'for-3.18/picolcd', 'for-3.18/rmi', 'for-3.18/sony', 'for-3.18/uhid', 'for-3.18/upstream' and 'for-3.18/wacom' into for-linus
2014-10-01HID: usbhid: add another mouse that needs QUIRK_ALWAYS_POLLOliver Neukum1-0/+1
There is a second mouse sharing the same vendor strings but different IDs. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-08HID: usbhid: fix PIXART optical mouseOliver Neukum1-0/+1
This mouse keeps disconnecting in runlevel 3. It needs the ALWAYS_POLL quirk. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-08HID: Add Holtek USB ID 04d9:a0c2 ETEKCITY ScrollJohn DeSilva1-0/+1
The report descriptor for the HOLTEK USB ID 04d9:a0c2 (ETEKCITY Scroll T-140 Gaming Mouse) is set to a very large amount of consumer usages (2^16), exceeding HID_MAX_USAGES. Added id, bindings and comments for the mouse, added to hid_have_special_driver, and reduced the usage and logical maximums to 0x2fff, consistent with the other mice in the category. Tested on the hardware. Signed-off-by: John C. DeSilva <desilvjo@umich.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-08HID: usbhid: enable always-poll quirk for Elan TouchscreenJohan Hovold1-0/+3
Enable the always-poll quirk for Elan Touchscreens found on some recent Samsung laptops. Without this quirk the device keeps disconnecting from the bus (and is re-enumerated) unless opened (and kept open, should an input event occur). Note that while the device can be run-time suspended, the autosuspend timeout must be high enough to allow the device to be polled at least once before being suspended. Specifically, using autosuspend_delay_ms=0 will still cause the device to disconnect on input events. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-04HID: add support for PenMount HID TouchScreen DriverChristian Gmeiner1-0/+1
This patch adds a seperate hid-penmount driver to work around an issue with the HID report descriptor. The descriptor does not contain the ContactID usage and as result the touchscreen is represented as normal mouse to the system. This driver maps the button 0 emitted by the touchscreen to BTN_TOUCH. This makes it possible to use touch events in userspace. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-08Merge branch 'for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED updates from Bryan Wu: "This cycle we got: - a fix of attribute-creation race for the whole leds subsystem - new drivers (HID:GT683R, leds-ipaq-micro) - other fixing and clean up" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (23 commits) leds: ipaq-micro: fix sparse non static symbol warning leds: add driver for the iPAQ micro Documentation: dts: tcs6507: Fix wrong statement about #gpio-cells leds: convert blink timer to workqueue leds:pca963x: Update for PCA9635 and correct statement about MODE2 OUTDRV default leds:pca963x: Always initialize MODE2 register leds:pca963x: Add support for PCA9635 LED driver chip HID: gt683r: move mode attribute to led-class devices HID: gt683r: fix race condition HID: add support for MSI GT683R led panels leds: lp55xx-common: fix attribute-creation race leds: lp55xx-common: fix sysfs entry leak input: lm8323: fix attribute-creation race leds: wm831x-status: fix attribute-creation race leds: ss4200: fix attribute-creation race leds: ns2: fix attribute-creation race leds: netxbig: fix attribute-creation race leds: max8997: fix attribute-creation race leds: lm3642: fix attribute-creation race leds: lm355x: fix attribute-creation race ...
2014-08-06Merge branches 'for-3.17/upstream', 'for-3.17/cp2112', 'for-3.17/huion', ↵Jiri Kosina1-1/+5
'for-3.17/hyperv', 'for-3.17/i2c', 'for-3.17/lenovo', 'for-3.17/rmi' and 'for-3.17/sony' into for-linus
2014-07-29HID: ignore jabra gn9350ePatrick Plattes1-0/+1
Ignore Jabra GN9350E HID interface. USB audio is working nicely, but registering as HID blocks USB mouse buttons. Since special userspace programs are needed we will avoid attaching usbhid drivers in general. Signed-off-by: Patrick Plattes <patrick@erdbeere.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29HID: use multi input quirk for 22b9:2968Wen-chien Jesse Sung1-0/+1
This device generates ABS_Z and ABS_RX events instead of ABS_X and ABS_Y. Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29HID: lenovo: Add support for Compact (BT|USB) keyboardJamie Lentin1-0/+2
Add support for both ThinkPad Compact Bluetooth Keyboard with TrackPoint and ThinkPad Compact USB Keyboard with TrackPoint. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29HID: huion: Use "tablet" instead of specific modelNikolai Kondrashov1-1/+1
Use word "tablet" in identifiers and comments instead of referring to specific Huion tablet model name, as the product ID is used by at least several tablet models. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29HID: add quirk for 0x04d9:0xa096 deviceWangzhao Cai1-0/+1
I am using a USB keyborad that give me "usb_submit_urb(ctrl) failed: -1" error when I plugin it. and I need to wait for 10s for this device to be ready. By adding this quirks, the usb keyborad is usable right after plugin Signed-off-by: Wangzhao Cai <microcaicai@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-07HID: use multi input quirk for 22b9:2968Wen-chien Jesse Sung1-0/+1
This device generates ABS_Z and ABS_RX events instead of ABS_X and ABS_Y. Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-01HID: add support for MSI GT683R led panelsJanne Kanniainen1-1/+1
This driver adds support for USB controlled led panels that exists in MSI GT683R laptop Signed-off-by: Janne Kanniainen <janne.kanniainen@gmail.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-06-27HID: usbhid: quirk for PM1610 and PM1640 Touchscreen.John Sung1-0/+2
These device needs to be added to the quirks list with HID_QUIRK_NOGET, otherwise they will reset upon receiving the get input report requests. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-04Merge branches 'for-3.15/upstream-fixes' and 'for-3.16/upstream' into for-linusJiri Kosina1-0/+9
Conflicts: drivers/hid/hid-sensor-hub.c
2014-06-02HID: hid-sensor-hub: new device id and quirk for STM Sensor hubArchana Patni1-0/+1
Added STM sensor hub new device id. Also added this new device in HID_SENSOR_HUB_ENUM_QUIRK to fix report descriptors. These devices uses old FW which uses logical 0 as minimum. In these, HID reports are not using proper collection classes. So we need to fix report descriptors,for such devices. This will not have any impact, if the FW uses logical 1 as minimum. Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-02HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB KeykoardJiri Kosina1-0/+3
The device which identifies itself as a "USB Keykoard" (no typo) with VID:PID 1a2c:0023 does not seem to be handling the reports initialization very well. This results in a "usb_submit_urb(ctrl) failed: -1" message from the kernel when connected, and a delay before its initialization. This patch adds the quirk for this device, which causes the delay to disappear. [jkosina@suse.cz: remove superfluous comment and fix ordering] Signed-off-by: Daniel Kamil Kozar <dkk089@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-28HID: hid-sensor-hub: Set report quirk for Microsoft SurfaceReyad Attiyat1-0/+3
Add the Microsoft Surface Pro 2 Type/Touch and default device hardware ID's Set report quirk for the device in hid-sensor-hub Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-20HID: quirk for Saitek RAT7 and MMO7 mices' mode buttonHarald Brinkmann1-0/+2
Some saitek mice implement a tristate button (for switching button mappings in the original driver) by keeping one of three (non-physical) buttons constantly pressed. This breaks X and probably other userspace software. This patch implements a quirk for the R.A.T.7 and M.M.O.7, tracking the mode and generating presses of a single button if it changes. Also the missing release event is generated instantly. Signed-off-by: Harald Brinkmann <hbrinkmann@braincalibration.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-06HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad YogasPeter F. Patel-Schneider1-0/+3
The sensor hub in Lenovo Yogas needs the enumeration quirk. I've been running the patch for over a month with no problems, whereas the unpatched drivers reliably mis-initialized the sensors. Signed-off-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-05HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103SHans de Goede1-0/+1
This touchpad seriously dislikes init reports, not only timeing out, but also refusing to work after this. Cc: stable@vger.kernel.org Reported-and-tested-by: Vincent Fortier <th0ma7@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-24HID: multitouch: add support of EliteGroup 05D8 panelsTomas Sokorai1-0/+3
They need to have the class SERIAL. Note: it is a Win 7 panel, not Win 8 certified. Signed-off-by: Tomas Sokorai <tsokorai@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-07Revert "HID: microsoft: Add ID's for Surface Type/Touch Cover 2"Derya1-2/+0
This reverts commit 117309c51dca42121f70cacec801511b76acf75c. The MS Surface Pro 2 has an USB composite device with 3 interfaces - interface 0 - sensor hub - interface 1 - wacom digitizer - interface 2 - the keyboard cover, if one is attached This USB composite device changes it product id dependent on if and which keyboard cover is attached. Adding the covers to hid_have_special_driver prevents loading the right hid drivers for the other two interfaces, all 3 get loaded with hid-microsoft. We don't even need hid-microsoft for the keyboards. We have to revert this to load the right hid modules for each interface. CC: stable@vger.kernel.org # kernel 3.14 only Signed-off-by: Derya <derya.kiran@yahoo.de> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-04HID: sensor-hub: add sensor hub quirk for ThinkPad HelixStephen Chandler Paul1-1/+2
Just like some of the other laptops/tablets on the market with ultrabook sensors, the ThinkPad Helix's sensor hub requires a special quirk in order for it to power on properly. Without it the sensors are detected by the kernel and set up as usual, but they won't output any data. This will also fix the sensors on any other laptops with the same model of sensor hub. Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-03Merge branch 'for-linus' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - substantial cleanup of the generic and transport layers, in the direction of an ultimate goal of making struct hid_device completely transport independent, by Benjamin Tissoires - cp2112 driver from David Barksdale - a lot of fixes and new hardware support (Dualshock 4) to hid-sony driver, by Frank Praznik - support for Win 8.1 multitouch protocol by Andrew Duggan - other smaller fixes / device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (75 commits) HID: sony: fix force feedback mismerge HID: sony: Set the quriks flag for Bluetooth controllers HID: sony: Fix Sixaxis cable state detection HID: uhid: Add UHID_CREATE2 + UHID_INPUT2 HID: hyperv: fix _raw_request() prototype HID: hyperv: Implement a stub raw_request() entry point HID: hid-sensor-hub: fix sleeping function called from invalid context HID: multitouch: add support for Win 8.1 multitouch touchpads HID: remove hid_output_raw_report transport implementations HID: sony: do not rely on hid_output_raw_report HID: cp2112: remove the last hid_output_raw_report() call HID: cp2112: remove various hid_out_raw_report calls HID: multitouch: add support of other generic collections in hid-mt HID: multitouch: remove pen special handling HID: multitouch: remove registered devices with default behavior HID: hidp: Add a comment that some devices depend on the current behavior of uniq HID: sony: Prevent duplicate controller connections. HID: sony: Perform a boundry check on the sixaxis battery level index. HID: sony: Fix work queue issues HID: sony: Fix multi-line comment styling ...
2014-04-01Merge branches 'for-3.15/multitouch', 'for-3.15/sony' and 'for-3.15/uhid' ↵Jiri Kosina1-0/+3
into for-linus
2014-04-01Merge branch 'for-3.15/microsoft' into for-linusJiri Kosina1-0/+1
Conflicts: drivers/hid/hid-core.c
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-08 13:33:19 +0300