summaryrefslogtreecommitdiff
path: root/drivers/hid/hid-ids.h
AgeCommit message (Collapse)AuthorFilesLines
2021-04-29Merge branch 'for-5.13/plantronics' into for-linusJiri Kosina1-0/+1
- Workaround for broken behavior of Plantronics Blackwire from Maxim Mikityanskiy
2021-04-29Merge branch 'for-5.13/magicmouse' into for-linusJiri Kosina1-0/+1
- Apple Magic Mouse 2 support from John Chen
2021-04-29Merge branch 'for-5.13/logitech' into for-linusJiri Kosina1-2/+9
- Support for newer Quad/BT 2.0 Logitech receivers in HID proxy mode from Hans de Goede
2021-04-29Merge branch 'for-5.13/ft260' into for-linusJiri Kosina1-0/+1
- Support for FTDI FT260 I2C host adapter from Michael Zaidman
2021-04-07HID: magicmouse: add Apple Magic Mouse 2 supportJohn Chen1-0/+1
Bluetooth device Vendor 004c (Apple) Device 0269 (Magic Mouse 2) Add support for Apple Magic Mouse 2, putting the device in multi-touch mode. Co-authored-by: Rohit Pidaparthi <rohitpid@gmail.com> Co-authored-by: RicardoEPRodrigues <ricardo.e.p.rodrigues@gmail.com> Signed-off-by: John Chen <johnchen902@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-03-16HID: ft260: add usb hid to i2c host bridge driverMichael Zaidman1-0/+1
The FTDI FT260 chip implements USB to I2C/UART bridges through two USB HID class interfaces. The first - for I2C, and the second for UART. Each interface is independent, and the kernel detects it as a separate USB hidraw device. This commit adds I2C host adapter support. Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com> Tested-by: Aaron Jones (FTDI-UK) <aaron.jones@ftdichip.com Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-03-08HID: asus: Add support for 2021 ASUS N-Key keyboardLuke D Jones1-0/+1
Some new 2021 version of ASUS gamer laptops are using an updated N-Key keyboard with the PID of 0x19b6. This version is using the same init sequence and brightness control as the 0x1866 keyboard. Signed-off-by: Luke D Jones <luke@ljones.dev> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-03-08HID: plantronics: Workaround for double volume key pressesMaxim Mikityanskiy1-0/+1
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice for each volume key press. This patch adds a quirk to hid-plantronics for this product ID, which will ignore the second volume key press if it happens within 5 ms from the last one that was handled. The patch was tested on the mentioned model only, it shouldn't affect other models, however, this quirk might be needed for them too. Auto-repeat (when a key is held pressed) is not affected, because the rate is about 3 times per second, which is far less frequent than once in 5 ms. Fixes: 81bb773faed7 ("HID: plantronics: Update to map volume up/down controls") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-03-08HID: logitech-dj: Handle newer quad/bt2.0 receivers in HID proxy modeHans de Goede1-2/+4
The Dinovo Edge and Dinovo Mini keyboards with builtin touchpad come with a different version of the quad/bt2.0 combo receivers shipped with the MX5000 and MX5500 keyboards. These receivers are compatible with one another, e.g. the Dinovo Edge keyboard can be paired with the MX5000 receiver. Like the MX5x00 receivers in HID proxy mode these receivers present themselves as a hub with multiple USB-HID devices, one for the keyboard and one for the mouse. Where they differ is that the mouse USB-device has 2 input reports for reporting mice events. It has the exact same INPUT(2) report as the MX5x00 receivers, but it also has a second INPUT(5) mouse report which is different; and when the Dinovo receivers are paired with the Dinovo keyboards the second INPUT(5) mouse report is actually used for events on the builtin touchpad. Add support for handling the Dinovo quad/bluetooth-2.0 combo receivers in HID proxy mode to logitech-dj, like we already do for the similar MX5000 and MX5500 receivers. This adds battery monitoring functionality (through logitech-hidpp) and fixes the Phone (Fn + F1) and "[A]" - "[D]" (Fn + F9 - F12) hotkeys not working on the Dinovo Edge. Note these receivers present themselves as a hub with 2 separate USB devices for the keyboard and mouse; and the logitech-dj code needs to bind to both devices (just as with the MX5x00 receivers). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-03-08HID: logitech-dj: Use hid-ids.h defines for USB device-ids for all supported ↵Hans de Goede1-0/+5
devices The logitech-dj code already uses hid-ids.h defines for almost all devices it supports. Lets be consistent: add and use hid-ids.h defines for the G700, MX5000 and MX5500 receivers too. Also add / update some comments to make the comment style in the hid_device_id table consistent too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-03-08HID: google: add don USB idShou-Chieh Hsu1-0/+1
Add 1 additional hammer-like device. Signed-off-by: Shou-Chieh Hsu <shouchieh@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-02-23Merge branch 'for-5.12/sony' into for-linusJiri Kosina1-1/+5
- tilt support on Sony Guitar Hero devices from Sanjay Govind
2021-02-23Merge branch 'for-5.12/playstation-v2' into for-linusJiri Kosina1-0/+1
- Playstation DualSense support from Roderick Colenbrander
2021-02-23Merge branch 'for-5.12/chicony' into for-linusJiri Kosina1-0/+1
- KEY_RFKILL support for Chicony devices from Jian-Hong Pan
2021-02-11HID: playstation: initial DualSense USB support.Roderick Colenbrander1-0/+1
Implement support for PlayStation DualSense gamepad in USB mode. Support features include buttons and sticks, which adhere to the Linux gamepad spec. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2021-02-09HID: Ignore battery for Elan touchscreen on HP Spectre X360 15-df0xxxElia Devito1-0/+1
Battery status is reported for the HP Spectre X360 Convertible 15-df0xxx even if it does not have a battery. Prevent it to always report the battery as low. Signed-off-by: Elia Devito <eliadevito@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-02-05HID: i2c-hid: Add I2C_HID_QUIRK_NO_IRQ_AFTER_RESET for ITE8568 EC on Voyo ↵Hans de Goede1-0/+2
Winpad A15 The ITE8568 EC on the Voyo Winpad A15 presents itself as an I2C-HID attached keyboard and mouse (which seems to never send any events). This needs the I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirk, otherwise we get the following errors: [ 3688.770850] i2c_hid i2c-ITE8568:00: failed to reset device. [ 3694.915865] i2c_hid i2c-ITE8568:00: failed to reset device. [ 3701.059717] i2c_hid i2c-ITE8568:00: failed to reset device. [ 3707.205944] i2c_hid i2c-ITE8568:00: failed to reset device. [ 3708.227940] i2c_hid i2c-ITE8568:00: can't add hid device: -61 [ 3708.236518] i2c_hid: probe of i2c-ITE8568:00 failed with error -61 Which leads to a significant boot delay. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-01-18HID: sony: Add support for tilt on guitar hero guitarsSanjay Govind1-1/+5
This commit adds support for tilt on Standard Guitar Hero PS3 Guitars, and GH3 PC Guitars, mapping it to ABS_RY. Note that GH3 PC Guitars are identical, only they use different VID and PIDs. Also note that vendor id 0x12ba is used by a variety of different rhythm controllers on the ps3. Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-01-14HID: chicony: Add Wireless Radio Control feature for Chicony devicesJian-Hong Pan1-0/+1
Some Chicony's keyboards support airplane mode hotkey (Fn+F2) with "Wireless Radio Control" feature. For example, the wireless keyboard [04f2:1236] shipped with ASUS all-in-one desktop. After consulting Chicony for this hotkey, learned the device will send with 0x11 as the report ID and 0x1 as the value when the key is pressed down. This patch maps the event as KEY_RFKILL. Signed-off-by: Jian-Hong Pan <jhp@endlessos.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-01-08HID: Ignore battery for Elan touchscreen on ASUS UX550Seth Miller1-0/+1
Battery status is being reported for the Elan touchscreen on ASUS UX550 laptops despite not having a batter. It always shows either 0 or 1%. Signed-off-by: Seth Miller <miller.seth@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-12-16Merge branch 'for-5.11/sony' into for-linusJiri Kosina1-0/+3
- DS4 power and firmware reporting fixes, from Roderick Colenbrander - support for ghlive PS3/WII u dongles, from Pascal Giard
2020-12-16Merge branch 'for-5.11/elecom' into for-linusJiri Kosina1-0/+1
- support for EX-G M-XGL20DLBK device, from YOSHIOKA Takuma
2020-12-16Merge branch 'for-5.11/asus' into for-linusJiri Kosina1-0/+1
Support for ASUS N-Key keyboard, from Luke D Jones
2020-11-27HID: ite: Add support for Acer S1002 keyboard-dockHans de Goede1-0/+1
Make the hid-ite driver handle the Acer S1002 keyboard-dock, this leads to 2 improvements: 1. The non working wifi-toggle hotkey now works. 2. Toggling the touchpad on of with the hotkey will no show OSD notifications in e.g. GNOME3. The actual toggling is handled inside the keyboard, this adds support for notifying evdev listeners about this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-11-27HID: sony: support for ghlive ps3/wii u donglesPascal Giard1-0/+3
This commit adds support for the Guitar Hero Live PS3 and Wii U dongles. These dongles require a "magic" USB control message [1] to be sent approximately every 10 seconds otherwise the dongle will not report events where the strumbar is hit while a fret is being held. Also, inspired by a patch sent on linux-input by Sanjay Govind [2], the accelerometer is mapped to ABS_RY for tilt. Interestingly, the Wii U and PS3 dongles share the same VID and PID. [1] https://github.com/ghlre/GHLtarUtility/ [2] https://marc.info/?l=linux-input&m=157242835928542&w=2 Signed-off-by: Pascal Giard <pascal.giard@etsmtl.ca> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-11-25HID: mf: add support for 0079:1846 Mayflash/Dragonrise USB Gamecube AdapterEthan Warth1-0/+1
Mayflash/Dragonrise seems to have yet another device ID for one of their Gamecube controller adapters. Previous to this commit, the adapter registered only one /dev/input/js* device, and all controller inputs (from any controller) were mapped to this device. This patch defines the 1846 USB device ID and enables the HID_QUIRK_MULTI_INPUT quirk for it, which fixes that (with the patch, four /dev/input/js* devices are created, one for each of the four controller ports). Signed-off-by: Ethan Warth <redyoshi49q@gmail.com> Tested-by: Wladimir J. van der Laan <laanwj@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-11-25HID: elecom: add support for EX-G M-XGL20DLBK wireless mouseYOSHIOKA Takuma1-0/+1
Enables three buttons (Fn1, Fn2, and Fn3) on the ELECOM M-XGL20DLBK wireless mouse. While this mouse is EX-G brand, report descriptor is a bit different from EX-G trackball mouse. To enable extra buttons, report should be rewritten in a similar way to trackballs, but with different position parameters. Signed-off-by: YOSHIOKA Takuma <lo48576@hard-wi.red> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-11-12HID: Add Logitech Dinovo Edge battery quirkHans de Goede1-0/+1
The battery status is also being reported by the logitech-hidpp driver, so ignore the standard HID battery status to avoid reporting the same info twice. Note the logitech-hidpp battery driver provides more info, such as properly differentiating between charging and discharging. Also the standard HID battery info seems to be wrong, reporting a capacity of just 26% after fully charging the device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-11-09HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devicesChris Ye1-0/+4
Kernel 5.4 introduces HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE, devices need to be set explicitly with this flag. Signed-off-by: Chris Ye <lzye@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-10-29HID: asus: Add support for ASUS N-Key keyboardLuke D Jones1-0/+1
The ASUS N-Key keyboard uses the productId of 0x1866 and is used in almost all modern ASUS gaming laptops with slight changes to the firmware. This patch enables: Fn+key hotkeys, keyboard backlight brightness control. Additionally this keyboard requires the LED interface to be initialized before such things as keyboard backlight control work. Signed-off-by: Luke D Jones <luke@ljones.dev> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-10-23HID: add support for Sega SaturnJiri Kosina1-0/+1
This device needs HID_QUIRK_MULTI_INPUT in order to be presented to userspace in a consistent way. Reported-and-tested-by: David Gámiz Jiménez <david.gamiz@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-10-23HID: cypress: Support Varmilo Keyboards' media hotkeysFrank Yang1-0/+2
The Varmilo VA104M Keyboard (04b4:07b1, reported as Varmilo Z104M) exposes media control hotkeys as a USB HID consumer control device, but these keys do not work in the current (5.8-rc1) kernel due to the incorrect HID report descriptor. Fix the problem by modifying the internal HID report descriptor. More specifically, the keyboard report descriptor specifies the logical boundary as 572~10754 (0x023c ~ 0x2a02) while the usage boundary is specified as 0~10754 (0x00 ~ 0x2a02). This results in an incorrect interpretation of input reports, causing inputs to be ignored. By setting the Logical Minimum to zero, we align the logical boundary with the Usage ID boundary. Some notes: * There seem to be multiple variants of the VA104M keyboard. This patch specifically targets 04b4:07b1 variant. * The device works out-of-the-box on Windows platform with the generic consumer control device driver (hidserv.inf). This suggests that Windows either ignores the Logical Minimum/Logical Maximum or interprets the Usage ID assignment differently from the linux implementation; Maybe there are other devices out there that only works on Windows due to this problem? Signed-off-by: Frank Yang <puilp0502@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-10-22HID: uclogic: Add ID for Trust Flex Design TabletMartijn van de Streek1-0/+1
The Trust Flex Design Tablet has an UGTizer USB ID and requires the same initialization as the UGTizer GP0610 to be detected as a graphics tablet instead of a mouse. Signed-off-by: Martijn van de Streek <martijn@zeewinde.xyz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-09-22HID: multitouch: Lenovo X1 Tablet Gen2 trackpoint and buttonsMikael Wikström1-0/+1
One more device that needs 40d5bb87 to resolve regression for the trackpoint and three mouse buttons on the type cover of the Lenovo X1 Tablet Gen2. Signed-off-by: Mikael Wikström <leakim.wikstrom@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-09-22HID: multitouch: Lenovo X1 Tablet Gen3 trackpoint and buttonsMikael Wikström1-0/+1
One more device that needs 40d5bb87 to resolve regression for the trackpoint and three mouse buttons on the type cover of the Lenovo X1 Tablet Gen3. It is probably also needed for the Lenovo X1 Tablet Gen2 with PID 0x60a3 Signed-off-by: Mikael Wikström <leakim.wikstrom@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-09-09HID: ite: Add USB id match for Acer One S1003 keyboard dockHans de Goede1-0/+1
The Acer One S1003 2-in-1 keyboard dock uses a Synaptics S910xx touchpad which is connected to an ITE 8910 USB keyboard controller chip. This keyboard has the same quirk for its rfkill / airplane mode hotkey as other keyboards with ITE keyboard chips, it only sends a single release event when pressed and released, it never sends a press event. This commit adds this keyboards USB id to the hid-ite id-table, fixing the rfkill key not working on this keyboard. Note that like for the Acer Aspire Switch 10 (SW5-012) the id-table entry matches on the HID_GROUP_GENERIC generic group so that hid-ite only binds to the keyboard interface and the mouse/touchpad interface is left untouched so that hid-multitouch can bind to it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-08-31HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controllerNicholas Miell1-0/+1
When operating in XInput mode, the 8bitdo SN30 Pro+ requires the same quirk as the official Xbox One Bluetooth controllers for rumble to function. Other controllers like the N30 Pro 2, SF30 Pro, SN30 Pro, etc. probably also need this quirk, but I do not have the hardware to test. Signed-off-by: Nicholas Miell <nmiell@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-08-31HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devicesNirenjan Krishnan1-0/+2
The Saitek X52 family of joysticks has a pair of axes that were originally (by the Windows driver) used as mouse pointer controls. The corresponding usage page is the Game Controls page, which is not recognized by the generic HID driver, and therefore, both axes get mapped to ABS_MISC. The quirk makes the second axis get mapped to ABS_MISC+1, and therefore made available separately. One Saitek X52 device is already fixed. This patch fixes the other two known devices with VID/PID 06a3:0255 and 06a3:0762. Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-08-17HID: quirks: Always poll three more Lenovo PixArt miceSebastian Parschauer1-0/+3
The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. One Lenovo PixArt mouse is already fixed. Got two references for 17ef:602e and three references for 17ef:6019 misbehaving like this. Got one direct bug report for 17ef:6093 from Wyatt Ward (wyatt8740). So add HID_QUIRK_ALWAYS_POLL for all of them. Link: https://github.com/sriemer/fix-linux-mouse issue 22 Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-08-10Merge branch 'for-5.9/lenovo' into for-linusJiri Kosina1-0/+1
- ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede
2020-07-21HID: quirks: add NOGET quirk for Logitech GROUPIkjoon Jang1-0/+1
Add HID_QUIRK_NOGET for Logitech GROUP device. Logitech GROUP is a compound with camera and audio. When the HID interface in an audio device is requested to get specific report id, all following control transfers are stalled and never be restored back. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203419 Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-07-07HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard supportHans de Goede1-0/+1
Some of the function keys special functions all use the same 0x000c0001 usage code, add a mapping for these based on the usage_index; And add support for the Speaker and Mic mute LEDs integrated into the F1 and F4 keys. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-06-24HID: quirks: Ignore Simply Automated UPB PIMJames Hilliard1-0/+2
As this is a cypress HID->COM RS232 style device that is handled by the cypress_M8 driver we also need to add it to the ignore list in hid-quirks. Cc: stable <stable@vger.kernel.org> Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-06-16HID: quirks: Always poll Obins Anne Pro 2 keyboardSebastian Parschauer1-0/+1
The Obins Anne Pro 2 keyboard (04d9:a293) disconnects after a few minutes of inactivity when using it wired and typing does not result in any input events any more. This is a common firmware flaw. So add the ALWAYS_POLL quirk for this device. GitHub user Dietrich Moerman (dietrichm) tested the quirk and requested my help in my project https://github.com/sriemer/fix-linux-mouse issue 22 to provide this patch. Link: https://www.reddit.com/r/AnnePro/comments/gruzcb/anne_pro_2_linux_cant_type_after_inactivity/ Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de> Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-06-03Merge branches 'for-5.7/upstream-fixes', 'for-5.8/apple', 'for-5.8/asus', ↵Jiri Kosina1-8/+1
'for-5.8/core', 'for-5.8/intel-ish', 'for-5.8/logitech', 'for-5.8/mcp2221' and 'for-5.8/multitouch' into for-linus
2020-05-27HID: multitouch: Remove MT_CLS_WIN_8_DUALKai-Heng Feng1-8/+0
After commit c23e2043d5f7 ("HID: multitouch: do not filter mice nodes"), MT_CLS_WIN_8 also supports mouse nodes, hence make MT_CLS_WIN_8_DUAL redundant. Remove MT_CLS_WIN_8_DUAL accordingly. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-05-15HID: Add quirks for Trust Panora Graphic TabletCristian Klein1-0/+3
The Trust Panora Graphic Tablet has two interfaces. Interface zero reports pen movement, pen pressure and pen buttons. Interface one reports tablet buttons and tablet scroll. Both use the mouse protocol. Without these quirks, libinput gets confused about what device it talks to. For completeness, here is the usbhid-dump: ``` $ sudo usbhid-dump -d 145f:0212 003:013:001:DESCRIPTOR 1588949402.559961 05 0D 09 01 A1 01 85 07 A1 02 09 00 75 08 95 07 81 02 C0 C0 09 0E A1 01 85 05 09 23 A1 02 09 52 09 53 25 0A 75 08 95 02 B1 02 C0 C0 05 0C 09 36 A1 00 85 06 05 09 19 01 29 20 15 00 25 01 95 20 75 01 81 02 C0 003:013:000:DESCRIPTOR 1588949402.563942 05 01 09 02 A1 01 85 08 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01 05 01 09 30 09 31 09 38 09 00 15 81 25 7F 75 08 95 04 81 06 C0 C0 05 01 09 02 A1 01 85 09 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01 05 01 09 30 09 31 26 FF 7F 95 02 75 10 81 02 05 0D 09 30 26 FF 03 95 01 75 10 81 02 C0 C0 05 01 09 00 A1 01 85 04 A1 00 26 FF 00 09 00 75 08 95 07 B1 02 C0 C0 ``` Signed-off-by: Cristian Klein <cristian.klein@elastisys.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-06HID: asus: Add support for multi-touch touchpad on Medion Akoya E1239THans de Goede1-0/+1
The multi-touch touchpad found on the Medion Akoya E1239T's keyboard-dock, uses the same custom multi-touch protocol as the Asus keyboard-docks (same chipset vendor, Integrated Technology Express / ITE). Add support for this using the existing multi-touch touchpad support in the hid-asus driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-04HID: quirks: Add HID_QUIRK_NO_INIT_REPORTS quirk for Dell K12A keyboard-dockHans de Goede1-0/+1
Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Dell K12A keyboard-dock, which can be used with various Dell Venue 11 models. Without this quirk the keyboard/touchpad combo works fine when connected at boot, but when hotplugged 9 out of 10 times it will not work properly. Adding the quirk fixes this. Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29HID: i2c-hid: reset Synaptics SYNA2393 on resumeDaniel Playfair Cal1-0/+3
On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious interrupts after resuming from suspend until it receives some input or is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it is reset when resuming from suspend. More information about the bug can be found in this mailing list discussion: https://www.spinics.net/lists/linux-input/msg59530.html Signed-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-10 03:30:31 +0300