summaryrefslogtreecommitdiff
path: root/drivers/hid/hid-ntrig.c
AgeCommit message (Collapse)AuthorFilesLines
2013-09-04HID: ntrig: validate feature report detailsKees Cook1-1/+2
A HID device could send a malicious feature report that would cause the ntrig HID driver to trigger a NULL dereference during initialization: [57383.031190] usb 3-1: New USB device found, idVendor=1b96, idProduct=0001 ... [57383.315193] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [57383.315308] IP: [<ffffffffa08102de>] ntrig_probe+0x25e/0x420 [hid_ntrig] CVE-2013-2896 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@kernel.org Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-23HID: replace strict_strtoul() with kstrtoul()Jingoo Han1-6/+6
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-25HID: use hid_hw_wait() instead of direct call to usbhidBenjamin Tissoires1-2/+2
This removes most of the dependencies between hid drivers and usbhid. The patch was constructed by replacing all occurences of usbhid_wait_io() by its hid_hw_wait() counterpart. Then, drivers not requiring USB_HID anymore have their USB_HID dependency cleaned in the Kconfig file. As of today, few drivers are still requiring an explicit USB layer dependency: * ntrig (a patch is on its way) * multitouch (one patch following and another on its way) * lenovo tpkbd * roccat * sony The last three are two deeply using direct calls to the usb subsystem to be able to be cleaned right now. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-25HID: use hid_hw_request() instead of direct call to usbhidBenjamin Tissoires1-3/+3
This allows the hid drivers to be independent from the transport layer. The patch was constructed by replacing all occurences of usbhid_submit_report() by its hid_hw_request() counterpart. Then, drivers not requiring USB_HID anymore have their USB_HID dependency cleaned in the Kconfig file. Finally, few drivers still depends on USB_HID. Many of them are requiring the io wait callback. They are found in the next patch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> For the sensor-hub part: Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-21Merge branches 'for-3.9/logitech', 'for-3.9/multitouch', 'for-3.9/ntrig', ↵Jiri Kosina1-46/+35
'for-3.9/thingm' and 'for-3.9/upstream' into for-linus
2013-02-18HID: ntrig: use input_configured() callback to set the nameBenjamin Tissoires1-34/+34
The use of input_configured() allows the ntrig driver to actually change the name of the input and its bitmask before it is added to the input subsystem. Thus, the logs are coherents and udev catch the real bitmask when the device is added. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-03HID: Use module_hid_driver macroH Hartley Sweeten1-12/+1
Use the new module_hid_driver macro in all HID drivers that have a simple register/unregister init/exit. This also converts the hid drivers that test for a failure of hid_register_driver() and report the failure. Using module_hid_driver in those drivers removes the failure message. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-25HID: ntrig: change default value of logical/physical width/height to 1Wen-chien Jesse Sung1-4/+4
Since something will be divided by these variables in show_min_width()/show_min_height() and show_activate_width()/ show_activate_height(), a divided error would be triggered if they are zero. Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Acked-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-14HID: hid-ntrig: init settle and mode checkRafi Rubin1-2/+43
Adding a wait before the wakeup signal. As a precautionary measure sanity check the current sensor mode. If needed reset it to "dual". When the device is responding poorly and needs the wakeup call, it was missing it. Giving it a chance to settle first improves the chances that signal gets through. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Tested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-14HID: ntrig remove if and drop an indentRafi Rubin1-229/+227
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Tested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-10HID: ntrig: apply NO_INIT_REPORTS quirkRafi Rubin1-1/+2
Probing reports does bad things with some ntrig firmwares, better to just leave them alone. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-08HID: ntrig don't dereference unclaimed hidinputRafi Rubin1-1/+14
Check before dereferencing field->hidinput to fix a reported invalid deference bug. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-10HID: Add and use hid_<level>: dev_<level> equivalentsJoe Perches1-5/+4
Neaten current uses of dev_<level> by adding and using hid specific hid_<level> macros. Convert existing uses of dev_<level> uses to hid_<level>. Convert hid-pidff printk uses to hid_<level>. Remove err_hid and use hid_err instead. Add missing newlines to logging messages where necessary. Coalesce format strings. Add and use pr_fmt(fmt) KBUILD_MODNAME ": " fmt Other miscellaneous changes: Add const struct hid_device * argument to hid-core functions extract() and implement() so hid_<level> can be used by them. Fix bad indentation in hid-core hid_input_field function that calls extract() function above. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-08HID: ntrig: identify firmware versionRafi Rubin1-0/+51
This adds firmware version polling to the end of probe and reports the version both in the raw form and proccessed to match the formatting used by N-Trig. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-30HID: ntrig: a bit of whitespace cleanupRafi Rubin1-9/+9
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-21HID: ntrig: add support for new firwmare versionsmicki1-0/+36
Signed-off-by: Micki Balanga <micki@n-trig.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11HID: ntrig: add filtering module parametersRafi Rubin1-0/+21
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11HID: ntrig: add sysfs access to filter parametersRafi Rubin1-0/+285
This should make it a little more convenient to tweak the filtering parameters on the fly. Also unlike load-time parameters, this provides independent tuning for each device conntected. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11HID: ntrig: add sensitivity and responsiveness supportRafi Rubin1-9/+211
The old rejection size thresholds were too high for the 12" devices. Larger surfaces like the Dell Studio17 exacerbated the problem since contact size is reported on the same logical scale, making a contact look smaller to the larger screen. Since we have observed erroneous ghost events from these devices we still need to filter the incoming stream. The prior size threshold filter is still in place, though with defaults set to leave it off. This patch adds the two new classes of filters, those that reject live frames before activation, and those that reject empty frames until deactivation. These filters are expressed in terms of a simple state machine for clarity (I hope). The activation filter has two components, slack and size, events are discarded until either is satisfied. Slack is defined as the number of seemingly good contacts to read before accepting the stream as valid (if the threshold is reached in the middle of a frame the remainder of that frame is still discarded). The deactivation filter discards empty frames until hitting a deactivate slack. This time measured in frames. N-Trig devices emit 5-8 (observed so far) empty frames at the end of multitouch activity. Ignoring the first few enables us to safely and gracefully handle erroneous empty frames, thus preventing a change in the tool state which would otherwise result in things like broken lines or dragged objects being dropped in bad places. Also, now that devices with different logical densities have been observed, the aforementioned sizes are scaled from physical to logical scales once those scales are identified. Hopefully this should mean that a given threshold value means the same thing across differing devices. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03HID: ntrig: Remove unused macro, TripleTap and QuadTapRafi Rubin1-30/+2
Removing the higher number taps. Their usage was incorrect and even if correct they should not be used for a touch screen. _MT_ events should be used to communicate multiple fingers. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03HID: ntrig: TipSwitch for single touch mode touch.Rafi Rubin1-8/+21
Include TipSwitch in the touch detection decision for some single touch firmwares. Confidence and InRange are high for all finger events including those used to indicate the finger is no longer in contact with the sensor. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-13HID: ntrig: Emit TOUCH with DOUBLETAP for single touchRafi Rubin1-0/+2
I squelched TipSwitch in a recent patch which resulted in the loss of Touch events for single touch firmwares. This patch just puts Touch back in for single touch, and bundles it with DoubleTap (like the multitouch code). The two events are used to convey the same message to different drivers. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-07HID: ntrig: explain firmware quirkJiri Kosina1-1/+2
Commit 6549981bc54777c ("HID: fix N-trig touch panel with recent firmware") adds a quirk that is needed for devices with more recent firmware so that they become operational. As it's not directly obvious from the code why is it needed, a comment is worthwile. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-07HID: fix N-trig touch panel with recent firmwareStephane Chatty1-2/+10
Added an init message that avoids device freeze with recent firmware. Signed-off-by: Stephane Chatty <chatty@enac.fr> Tested-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-10HID: ntrig: fix touch eventsRafi Rubin1-0/+11
This reinstates the lost unpressing of BTN_TOUCH. To prevent undesireably touch toggles this also deals with tip switch events. Added a trap to prevent going out of bounds for hidinputs with empty reports. Clear bits of unused buttons which result in misidentification. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-16HID: hid-ntrig: Single touch mode tapRafi Rubin1-0/+2
Add DOUBLETAP to events emitted when in single touch only mode. Users with a single touch firmware report not seeing the DOUBLETAP events; this is a side effect of dropping old mapping for confidence. The confidence mapping may be fine for singletouch mode but causes problems in multitouch mode. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-16HID: hid-ntrig: multitouch cleanup and fixRafi Rubin1-22/+94
This cleans up the identification of multitouch groups and enables the end of group sync. Taps are now explicitly handled to adjust for the changes in the event stream in multitouch mode. Added triple and quad tap for the benefit of tools that recognize different tap types but do not have full multi touch support. This cleans up the behavior particularly for the latest firmware, which didn't work particularly well with the older version of the driver. In this form, when multitouch is active, both mt and st events will come out of the "N-Trig MultiTouch" device. And when its not st events will come out of "N-Trig Touchscreen". Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-16HID: n-trig: remove unnecessary tool switchingRafi Rubin1-40/+1
With the pen and touch split apart, we no longer need to inject additional tool switching events. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-16HID: hid-ntrig add multi input quirk and clean upRafi Rubin1-11/+58
Added a quirk to enable distinct input devices. The digitizer utilizes three inputs to represent pen, multitouch and a normal touch screen. With the Pen partitioned, it behaves well and does not need special handling. Also, I set names to the input devices to clarify the functions of the various inputs. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23HID: adding __init/__exit macros to module init/exit functionsPeter Huewe1-2/+2
Trivial patch which adds the __init and __exit macros to the module_init / module_exit functions of several HID drivers from drivers/hid/ Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23HID: ntrig tool separation and pen usagesRafi Rubin1-4/+29
When both touch and pen are active send a tool announcement before sending any status changes so that event users may differentiate which tool is changing. Restored three usage codes used by the pen. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Acked-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-20HID: Multitouch support for the N-Trig touchscreenStephane Chatty1-11/+211
Adds support for multitouch interaction on the N-Trig touchscreen, using the new ABS_MT_* input constants. Single touch support works as previously. This code was tested against two versions of the N- Trig firmware: one that supports dual pen/finger single touch, and one that supports finger multitouch but no pen at all. Copyright notices that looked wrong were removed, as it seems that there is only code written in 2009 by Rafin Rubin and Stephane Chatty in this file. Signed-off-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30HID: remove compat stuffJiri Slaby1-2/+0
This removal was scheduled and there is no problem with later distros to adapt for the new bus, thanks to aliases. module-init-tools map files are deprecated nowadays, so that the patch which introduced hid ones into the m-i-t won't be accepted and hence there is no reason for leaving compat stuff in. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: add n-trig digitizer supportRafi Rubin1-0/+82
Added quirks for the N-Trig digitizer. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>