summaryrefslogtreecommitdiff
path: root/drivers/hid/hid-uclogic-params.h
AgeCommit message (Collapse)AuthorFilesLines
2023-01-18HID: uclogic: Handle wireless device reconnectionJosé Expósito1-0/+16
UGEEv2 tablets with battery can be connected using a USB cable or a USB Bluetooth dongle. When the Bluetooth dongle is used, the connection to that tablet can be lost because the tablet is out of the range of the receiver or because it was switched off using the switch placed in the back of the tablet's frame. After losing connection, the tablet is able to reconnect automatically and its firmware sends a special packet indicating that the device was reconnected. In response to this packet, the tablet needs to receive the same array of magic data it expects on probe to enable its interfaces. This patch implements a generic mechanism to hook raw events and schedule a work to perform any custom action. Tested-by: Mia Kanashi <chad@redpilled.dev> Tested-by: Andreas Grosse <andig.mail@t-online.de> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-18HID: uclogic: Add battery quirkJosé Expósito1-0/+1
Some UGEE v2 tablets have a wireless version with an internal battery and their firmware is able to report their battery level. However, there was not found a field on their descriptor indicating whether the tablet has battery or not, making it mandatory to classify such devices through the UCLOGIC_BATTERY_QUIRK quirk. Tested-by: Mia Kanashi <chad@redpilled.dev> Tested-by: Andreas Grosse <andig.mail@t-online.de> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-18HID: uclogic: Add frame type quirkJosé Expósito1-0/+23
The report descriptor used to get information about UGEE v2 devices is incorrect in the XP-PEN Deco Pro SW. It indicates that the device frame is of type UCLOGIC_PARAMS_FRAME_BUTTONS but the device has a frame of type UCLOGIC_PARAMS_FRAME_MOUSE. Here is the original report descriptor: 0x0e 0x03 0xc8 0xb3 0x34 0x65 0x08 0x00 0xff 0x1f 0xd8 0x13 0x00 0x00 ^ This byte should be 2 Add a quirk to be able to fix the reported frame type. Tested-by: Mia Kanashi <chad@redpilled.dev> Tested-by: Andreas Grosse <andig.mail@t-online.de> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-08-25HID: uclogic: Parse the UGEE v2 frame typeJosé Expósito1-0/+10
The string descriptor returned by UGEE v2 devices contains a byte indicating the device frame type. The values discovered so far are: - 0: Frame with buttons, present in the XP-PEN Deco L. - 1: Frame with buttons and dial, present in the PARBLO A610 PRO. - 2: Frame with buttons and a mouse, shaped as a dial + touchpad. Present in the XP-PEN Deco Pro S. Parse the frame type and add KUnit tests. Tested-by: Jouke Witteveen <j.witteveen@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-05-11HID: uclogic: Do not focus on touch ring onlyNikolai Kondrashov1-13/+14
Accommodate both touch ring and touch strip in naming throughout hid-uclogic by talking about abstract "touch" instead of "touch ring", wherever possible. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-05-11HID: uclogic: Move param printing to a functionNikolai Kondrashov1-112/+4
Move parameter printing from a format string/argument list to a function to allow printing the full parameters, which now wouldn't fit into a single print call. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-05-06HID: uclogic: Support disabling pen usageNikolai Kondrashov1-0/+7
Restore the ability to disable pen usage in hid-uclogic to support e.g. keyboard interfaces which also have pen usages for some reason, but which we don't want to rewrite report descriptors for. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-05-06HID: uclogic: Clarify pen/frame desc_ptr descriptionNikolai Kondrashov1-4/+4
Documentation improvements. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-05-06HID: uclogic: Clarify params desc_size descriptionNikolai Kondrashov1-1/+1
Documentation improvements. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-04-21HID: uclogic: Add support for bitmap dialsNikolai Kondrashov1-1/+14
A bitmap dial sends reports with a dedicated bit per direction: 1 means clockwise rotation, 2 means counterclockwise, as opposed to the normal 1 and -1 values. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-04-21HID: uclogic: Reduce indent for params format str/argsNikolai Kondrashov1-93/+93
Improve legibility of UCLOGIC_PARAMS_FMT_STR/ARGS. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-04-21HID: uclogic: Compress params format stringNikolai Kondrashov1-39/+51
Shorten the format string for printing out UC-Logic interface parameters so that it fits into a single log message. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-04-11HID: uclogic: Allow three frame parameter setsNikolai Kondrashov1-5/+47
Allow three frame parameter sets per each UC-Logic tablet interface. Bump the number of supported subreports to three as well to accommodate ID routing. This allows supporting the dial on Huion Q620M. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-04-11HID: uclogic: Support custom device suffix for framesNikolai Kondrashov1-0/+6
Support assigning custom device name suffixes to frame input devices instead of just "Pad". This allows distinguishing multiple frame input devices, e.g. for Huion HS610. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-04-11HID: uclogic: Add support for touch ring reportsNikolai Kondrashov1-4/+32
Add support for touch ring to UC-Logic driver. The touch ring reports can be flipped around a specific point to match the orientation and direction reported by the Wacom drivers. The proximity will also be reported similar to the Wacom drivers. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-03-01HID: uclogic: Support multiple frame input devicesNikolai Kondrashov1-13/+13
Add support for multiple frame input devices and their parameters to the UC-Logic driver. This prepares for creating a separate input device for Huion HS610 virtual touch ring reports. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-03-01HID: uclogic: Switch to matching subreport bytesNikolai Kondrashov1-6/+7
Switch from matching UC-Logic subreport with a mask to a full value to support detecting Huion HS610 touch dial reports. Those would match the button mask otherwise. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-03-01HID: uclogic: Replace pen_frame_flag with subreport_listNikolai Kondrashov1-24/+38
Replace a single pen_frame_flag in struct uclogic_params with subreport_list in struct uclogic_params_pen to prepare for handling more subreports in Huion HS610. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-03-01HID: uclogic: Remove pen usage maskingNikolai Kondrashov1-8/+1
Remove support for pen usage masking from hid-uclogic. Disable whole interfaces instead. Most of those interfaces are useless, and if there is one which has an unused pen usage, but also has useful reports, its report descriptor should be rewritten instead. This simplifies the code and the data structures. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-16HID: uclogic: Support Huion tilt reportingNikolai Kondrashov1-0/+8
Add support for Huion v2 protocol tilt reporting. Describe reports as angles in degrees, which is not exactly true, but there doesn't seem to be a straightforward, consistent conversion possible, and what's reported would have to be enough. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-02-21HID: uclogic: Support Gray-coded rotary encodersNikolai Kondrashov1-0/+8
Add support for converting Gray-coded rotary encoder input into dial input compatible with HID standard. Needed for Ugee G5 support. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-02-21HID: uclogic: Support faking Wacom pad device IDNikolai Kondrashov1-0/+9
Add support for inserting a Wacom pad device ID into hid-uclogic reports. This allows reporting dial inputs in a way compatible with the Wacom driver. Needed for Ugee G5 support in particular. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-02-21HID: uclogic: Support fragmented high-res reportsNikolai Kondrashov1-0/+8
Support parsing fragmented high-resolution reports in hid-uclogic to support v2 reporting protocol. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-02-21HID: uclogic: Support in-range reporting emulationNikolai Kondrashov1-0/+2
Newer UC-Logic tablets, such as ones made by Huion have stopped reporting in-range state, but they're otherwise worthy tablets. The manufacturer was notified of the problem and promised to fix this in the future. Meanwhile, detect pen coming in range, and emulate the reports to the userspace, to make the tablets useable. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-02-21HID: uclogic: Extract tablet parameter discovery into a moduleNikolai Kondrashov1-0/+180
Refactor and extract UC-Logic tablet initialization and parameter discovery into a module. For these tablets, the major part of parameter discovery cannot be separated from initialization so they have to be in the same module. Define explicitly and clearly what possible quirks the tablets may have to make the driver implementation easier and simpler. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-27 14:52:53 +0300