| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit ea36bf1827462e4a52365bf8e3f7d1712c5d9600 upstream.
In af93a167eda9, i2c_hid_parse was changed to continue with reading the
report descriptor before waiting for reset to be acknowledged.
This has lead to two regressions:
1. We fail to handle reset acknowledgment if it happens while reading
the report descriptor. The transfer sets I2C_HID_READ_PENDING, which
causes the IRQ handler to return without doing anything.
This affects both a Wacom touchscreen and a Sensel touchpad.
2. On a Sensel touchpad, reading the report descriptor this quickly
after reset results in all zeroes or partial zeroes.
The issues were observed on the Lenovo Thinkpad Z16 Gen 2.
The change in question was made based on a Microsoft article[0] stating
that Windows 8 *may* read the report descriptor in parallel with
awaiting reset acknowledgment, intended as a slight reset performance
optimization. Perhaps they only do this if reset is not completing
quickly enough for their tastes?
As the code is not currently ready to read registers in parallel with a
pending reset acknowledgment, and as reading quickly breaks the report
descriptor on the Sensel touchpad, revert to waiting for reset
acknowledgment before proceeding to read the report descriptor.
[0]: https://learn.microsoft.com/en-us/windows-hardware/drivers/hid/plug-and-play-support-and-power-management
Fixes: af93a167eda9 ("HID: i2c-hid: Move i2c_hid_finish_hwreset() to after reading the report-descriptor")
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2271136
Cc: stable@vger.kernel.org
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Link: https://lore.kernel.org/r/20240331182440.14477-1-kl@kl.wtf
[hdegoede@redhat.com Drop no longer necessary abort_reset error exit path]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c0f59e47a90c54d0153f8ddc0f80d7a36207d0e upstream.
The flag I2C_HID_READ_PENDING is used to serialize I2C operations.
However, this is not necessary, because I2C core already has its own
locking for that.
More importantly, this flag can cause a lock-up: if the flag is set in
i2c_hid_xfer() and an interrupt happens, the interrupt handler
(i2c_hid_irq) will check this flag and return immediately without doing
anything, then the interrupt handler will be invoked again in an
infinite loop.
Since interrupt handler is an RT task, it takes over the CPU and the
flag-clearing task never gets scheduled, thus we have a lock-up.
Delete this unnecessary flag.
Reported-and-tested-by: Eva Kurchatova <nyandarknessgirl@gmail.com>
Closes: https://lore.kernel.org/r/CA+eeCSPUDpUg76ZO8dszSbAGn+UHjcyv8F1J-CUPVARAzEtW9w@mail.gmail.com
Fixes: 4a200c3b9a40 ("HID: i2c-hid: introduce HID over i2c specification implementation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 21f28a7eb78dea6c59be6b0a5e0b47bf3d25fcbb ]
You can bind whatever action you want to the mouse's reprogrammable
buttons using Windows application. Allow Linux to receive multimedia keycodes.
Fixes: 3ed224e273ac ("HID: logitech-dj: Fix 064d:c52f receiver support")
Signed-off-by: Yaraslau Furman <yaro330@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 92826905ae340b7f2b25759a06c8c60bfc476b9f ]
The variable dev->devc in ish_dev_init was utilized by dev_err before it
was properly assigned. To rectify this, the assignment of dev->devc has
been moved to immediately follow memory allocation.
Without this change "(NULL device *)" is printed for device information.
Fixes: 8ae2f2b0a284 ("HID: intel-ish-hid: ipc: Fix potential use-after-free in work function")
Fixes: ae02e5d40d5f ("HID: intel-ish-hid: ipc layer")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9a5b1521e2d0d7ace70c6e5eed073babcec91409 ]
Internal touchscreen on Trogdor Pompom (AKA Dynabook Chromebook C1)
supports USI stylus. Unfortunately the HID descriptor for the stylus
interface does not contain "Stylus" physical collection, which makes
the kernel to try and pull battery information, resulting in errors.
Apply HID_BATTERY_QUIRK_AVOID_QUERY to the device.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c1db0073212ef39d5a46c2aea5e49bf884375ce4 ]
HP ProBook x360 435 G7 using older version of firmware which doesn't
support disabling the interrupt for all commands. Hence avoid disabling
the interrupt for that particular model.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218104
Fixes: b300667b33b2 ("HID: amd_sfh: Disable the interrupt for all command")
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bbf0dec30696638b8bdc28cb2f5bf23f8d760b52 ]
HPD sensor data is not populating properly because of wrong order of HPD
sensor structure elements. So update the order of structure elements to
match the HPD sensor data received from the firmware.
Fixes: 24a31ea94922 ("HID: amd_sfh: Add initial support for HPD sensor")
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2814646f76f8518326964f12ff20aaee70ba154d ]
Previous attempt to autodetect well-behaving patched firmware
introduced in commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw
on cptkbd and stop applying workaround") has shown that there are
false-positives on original firmware (on both 1st gen and 2nd gen
keyboards) which causes the middle button click workaround to be
mistakenly disabled.
This commit adds explicit parameter to sysfs to control this
workaround.
Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround")
Fixes: 43527a0094c1 ("HID: lenovo: Restrict detection of patched firmware only to USB cptkbd")
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
The xf86-input-wacom driver does not treat '0' as a valid serial
number and will drop any input report which contains an
MSC_SERIAL = 0 event. The kernel driver already takes care to
avoid sending any MSC_SERIAL event if the value of serial[0] == 0
(which is the case for devices that don't actually report a
serial number), but this is not quite sufficient.
Only the lower 32 bits of the serial get reported to userspace,
so if this portion of the serial is zero then there can still
be problems.
This commit allows the driver to report either the lower 32 bits
if they are non-zero or the upper 32 bits otherwise.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Fixes: f85c9dc678a5 ("HID: wacom: generic: Support tool ID and additional tool types")
CC: stable@vger.kernel.org # v4.10
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
After legacy suspend/resume via ACPI S3, sensor read operation fails
with timeout. Also, it will cause delay in resume operation as there
will be retries on failure.
This is caused by commit f645a90e8ff7 ("HID: intel-ish-hid:
ishtp-hid-client: use helper functions for connection"), which used
helper functions to simplify connect, reset and disconnect process.
Also avoid freeing and allocating client buffers again during reconnect
process.
But there is a case, when ISH firmware resets after ACPI S3 suspend,
ishtp bus driver frees client buffers. Since there is no realloc again
during reconnect, there are no client buffers available to send connection
requests to the firmware. Without successful connection to the firmware,
subsequent sensor reads will timeout.
To address this issue, ishtp bus driver does not free client buffers on
warm reset after S3 resume. Simply add the buffers from the read list
to free list of buffers.
Fixes: f645a90e8ff7 ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218442
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add support for the pointing stick (Accupoint) and 2 mouse buttons.
Present on some Toshiba/dynabook Portege X30 and X40 laptops.
It should close https://bugzilla.kernel.org/show_bug.cgi?id=205817
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
If a input device is opened before hid_hw_start is called, events may
not be received from the hardware. In the case of USB-backed devices,
for example, the hid_hw_start function is responsible for filling in
the URB which is submitted when the input device is opened. If a device
is opened prematurely, polling will never start because the device will
not have been in the correct state to send the URB.
Because the wacom driver registers its input devices before calling
hid_hw_start, there is a window of time where a device can be opened
and end up in an inoperable state. Some ARM-based Chromebooks in particular
reliably trigger this bug.
This commit splits the wacom_register_inputs function into two pieces.
One which is responsible for setting up the allocated inputs (and runs
prior to hid_hw_start so that devices are ready for any input events
they may end up receiving) and another which only registers the devices
(and runs after hid_hw_start to ensure devices can be immediately opened
without issue). Note that the functions to initialize the LEDs and remotes
are also moved after hid_hw_start to maintain their own dependency chains.
Fixes: 7704ac937345 ("HID: wacom: implement generic HID handling for pen generic devices")
Cc: stable@vger.kernel.org # v3.18+
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Since commit 680ee411a98e ("HID: logitech-hidpp: Fix connect event race")
the following messages appear in the kernel log from time to time:
logitech-hidpp-device 0003:046D:408A.0005: HID++ 4.5 device connected.
logitech-hidpp-device 0003:046D:408A.0005: HID++ 4.5 device connected.
logitech-hidpp-device 0003:046D:4051.0006: Disconnected
logitech-hidpp-device 0003:046D:408A.0005: Disconnected
As discussed, print the first per-device "device connected" message
at info level, demoting subsequent messages to debug level. Also,
demote the "Disconnected message" to debug level unconditionally.
Link: https://lore.kernel.org/lkml/3277085.44csPzL39Z@natalenko.name/
Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Follow the docs at Documentation/bpf/kfuncs.rst:
- declare the function with `__bpf_kfunc`
- disables missing prototype warnings, which allows to remove them from
include/linux/hid-bpf.h
Removing the prototypes is not an issue because we currently have to
redeclare them when writing the BPF program. They will eventually be
generated by bpftool directly AFAIU.
Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-3-052520b1e5e6@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Turns out that I got my reference counts wrong and each successful
bus_find_device() actually calls get_device(), and we need to manually
call put_device().
Ensure each bus_find_device() gets a matching put_device() when releasing
the bpf programs and fix all the error paths.
Cc: <stable@vger.kernel.org>
Fixes: f5c27da4e3c8 ("HID: initial BPF implementation")
Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-2-052520b1e5e6@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
When the kfunc hid_bpf_attach_prog() is called, we called twice fdget():
one for fetching the type of the bpf program, and one for actually
attaching the program to the device.
The problem is that between those two calls, we have no guarantees that
the prog_fd is still the same file descriptor for the given program.
Solve this by calling bpf_prog_get() earlier, and use this to fetch the
program type.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/bpf/CAO-hwJJ8vh8JD3-P43L-_CLNmPx0hWj44aom0O838vfP4=_1CA@mail.gmail.com/T/#t
Cc: <stable@vger.kernel.org>
Fixes: f5c27da4e3c8 ("HID: initial BPF implementation")
Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-1-052520b1e5e6@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
A while back the I2C HID implementation was split in an ACPI and OF
part, but the new OF driver never initialises the client pointer which
is dereferenced on power-up failures.
Fixes: b33752c30023 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules")
Cc: stable@vger.kernel.org # 5.12
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
'struct hidraw_list' is a circular queue whose head can be smaller than
tail. Using 'list->tail != list->head' to release all memory that should
be released.
Fixes: a5623a203cff ("HID: hidraw: fix memory leak in hidraw_release()")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There's a Cirque touchpad that wakes system up without anything touched
the touchpad. The input report is empty when this happens.
The reason is stated in HID over I2C spec, 7.2.8.2:
"If the DEVICE wishes to wake the HOST from its low power state, it can
issue a wake by asserting the interrupt."
This is fine if OS can put system back to suspend by identifying input
wakeup count stays the same on resume, like Chrome OS Dark Resume [0].
But for regular distro such policy is lacking.
Though the change doesn't bring any impact on power consumption for
touchpad is minimal, other i2c-hid device may depends on SLEEP control
power. So use a quirk to limit the change scope.
[0] https://chromium.googlesource.com/chromiumos/platform2/+/HEAD/power_manager/docs/dark_resume.md
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
[jkosina@suse.com: tweak changelog a bit]
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Let logitech-hidpp driver claim Logitech G Pro X Superlight 2.
Reported-by: Marcus Rückert <darix@opensu.se>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There are a number of issues in this code. First of all if
steam_create_client_hid() fails then it leads to an error pointer
dereference when we call hid_destroy_device(steam->client_hdev).
Also there are a number of leaks. hid_hw_stop() is not called if
hid_hw_open() fails for example. And it doesn't call steam_unregister()
or hid_hw_close().
Fixes: 691ead124a0c ("HID: hid-steam: Clean up locking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/1fd87904-dabf-4879-bb89-72d13ebfc91e@moroto.mountain
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This error message doesn't really add any information. If modprobe
fails then the user will already know what the error code is. In the
case of kmalloc() it's a style violation to print an error message for
that because kmalloc has it's own better error messages built in.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/305898fb-6bd4-4749-806c-05ec51bbeb80@moroto.mountain
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- assorted functional fixes for hid-steam ported from SteamOS betas
(Vicki Pfau)
- fix for custom sensor-hub sensors (hinge angle sensor and LISS
sensors) not working (Yauhen Kharuzhy)
- functional fix for handling Confidence in Wacom driver (Jason
Gerecke)
- support for Ilitek ili2901 touchscreen (Zhengqiao Xia)
- power management fix for Wacom userspace battery exporting
(Tatsunosuke Tobita)
- rework of wait-for-reset in order to reduce the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now 50%
better, but there are still further improvements to be made (Hans de
Goede)
- greatly improved coverage of Tablets in hid-selftests (Benjamin
Tissoires)
- support for Nintendo NSO controllers -- SNES, Genesis and N64 (Ryan
McClelland)
- support for controlling mcp2200 GPIOs (Johannes Roith)
- power management improvement for EHL OOB wakeup in intel-ish
(Kai-Heng Feng)
- other assorted device-specific fixes and code cleanups
* tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (53 commits)
HID: amd_sfh: Add a new interface for exporting ALS data
HID: amd_sfh: Add a new interface for exporting HPD data
HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int()
HID: i2c-hid: elan: Add ili2901 timing
dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901
HID: bpf: make bus_type const in struct hid_bpf_ops
HID: make ishtp_cl_bus_type const
HID: make hid_bus_type const
HID: hid-steam: Add gamepad-only mode switched to by holding options
HID: hid-steam: Better handling of serial number length
HID: hid-steam: Update list of identifiers from SDL
HID: hid-steam: Make client_opened a counter
HID: hid-steam: Clean up locking
HID: hid-steam: Disable watchdog instead of using a heartbeat
HID: hid-steam: Avoid overwriting smoothing parameter
HID: magicmouse: fix kerneldoc for struct magicmouse_sc
HID: sensor-hub: Enable hid core report processing for all devices
HID: wacom: Add additional tests of confidence behavior
HID: wacom: Correct behavior when processing some confidence == false touches
HID: nintendo: add support for nso controllers
...
|
|
Pull drm updates from Dave Airlie:
"This contains two major new drivers:
- imagination is a first driver for Imagination Technologies devices,
it only covers very specific devices, but there is hope to grow it
- xe is a reboot of the i915 GPU (shares display) side using a more
upstream focused development model, and trying to maximise code
sharing. It's not enabled for any hw by default, and will hopefully
get switched on for Intel's Lunarlake.
This also drops a bunch of the old UMS ioctls. It's been dead long
enough.
amdgpu has a bunch of new color management code that is being used in
the Steam Deck.
amdgpu also has a new ACPI WBRF interaction to help avoid radio
interference.
Otherwise it's the usual lots of changes in lots of places.
Detailed summary:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name"
* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
drm/amd/display: Allow z8/z10 from driver
drm/amd/display: fix bandwidth validation failure on DCN 2.1
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
drm/amd/display: Fix power_helpers.c codestyle
drm/amd/display: Fix hdcp_log.h codestyle
drm/amd/display: Fix hdcp2_execution.c codestyle
drm/amd/display: Fix hdcp_psp.h codestyle
drm/amd/display: Fix freesync.c codestyle
drm/amd/display: Fix hdcp_psp.c codestyle
drm/amd/display: Fix hdcp1_execution.c codestyle
drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce the param_unknown_fn type and other clean ups (Andy
Shevchenko)
- Various __counted_by annotations (Christophe JAILLET, Gustavo A. R.
Silva, Kees Cook)
- Add KFENCE test to LKDTM (Stephen Boyd)
- Various strncpy() refactorings (Justin Stitt)
- Fix qnx4 to avoid writing into the smaller of two overlapping buffers
- Various strlcpy() refactorings
* tag 'hardening-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
qnx4: Use get_directory_fname() in qnx4_match()
qnx4: Extract dir entry filename processing into helper
atags_proc: Add __counted_by for struct buffer and use struct_size()
tracing/uprobe: Replace strlcpy() with strscpy()
params: Fix multi-line comment style
params: Sort headers
params: Use size_add() for kmalloc()
params: Do not go over the limit when getting the string length
params: Introduce the param_unknown_fn type
lkdtm: Add kfence read after free crash type
nvme-fc: replace deprecated strncpy with strscpy
nvdimm/btt: replace deprecated strncpy with strscpy
nvme-fabrics: replace deprecated strncpy with strscpy
drm/modes: replace deprecated strncpy with strscpy_pad
afs: Add __counted_by for struct afs_acl and use struct_size()
VMCI: Annotate struct vmci_handle_arr with __counted_by
i40e: Annotate struct i40e_qvlist_info with __counted_by
HID: uhid: replace deprecated strncpy with strscpy
samples: Replace strlcpy() with strscpy()
SUNRPC: Replace strlcpy() with strscpy()
|
|
- functional fix for handling Confidence in Wacom driver (Jason Gerecke)
- power management fix for Wacom userspace battery exporting (Tatsunosuke Tobita)
Conflicts:
tools/testing/selftests/hid/tests/test_wacom_generic.py
|
|
- assorted functional fixes for hid-steam ported from SteamOS betas (Vicki Pfau)
|
|
- fix for custom sensor-hub sensors (hinge angle sensor and LISS sensors) not
working (Yauhen Kharuzhy)
|
|
- support for Nintendo NSO controllers -- SNES, Genesis
and N64 (Ryan McClelland)
|
|
- several assorted functional fixes for mcp2221 driver (Hamish Martin)
|
|
- support for controlling mcp2200 GPIOs (Johannes Roith)
|
|
- power management improvement for EHL OOB wakeup in intel-ish (Kai-Heng Feng)
- generic intel-ish code cleanups (Even Xu)
|
|
- rework of wait-for-reset in order to reduce the need
for I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now
50% better, but there are still further improvements to be made (Hans de Goede)
|
|
- bus_type constification (Greg Kroah-Hartman)
|
|
- support for Ilitek ili2901 touchscreen (Zhengqiao Xia)
|
|
- addition of new interfaces to export User presence information and
Ambient light from amd-sfh to other drivers within the kernel (Basavaraj
Natikar)
|
|
AMDSFH has information about the Ambient light via the Ambient
Light Sensor (ALS) which is part of the AMD sensor fusion hub.
Add a new interface to export this information, where other drivers like
PMF can use this information to enhance user experiences.
Link: https://lore.kernel.org/all/ad064333-48a4-4cfa-9428-69e8a7c44667@redhat.com/
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
AMDSFH has information about the User presence information via the Human
Presence Detection (HPD) sensor which is part of the AMD sensor fusion hub.
Add a new interface to export this information, where other drivers like
PMF can use this information to enhance user experiences.
Link: https://lore.kernel.org/all/ad064333-48a4-4cfa-9428-69e8a7c44667@redhat.com/
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Current amd_sfh driver has float_to_int() to convert units from
float to int. This is fine until this function gets called outside of
the current scope of file.
Add a prefix "amd_sfh" to float_to_int() so that function represents
the driver name. This function will be called by multiple callers in the
next patch.
Link: https://lore.kernel.org/all/ad064333-48a4-4cfa-9428-69e8a7c44667@redhat.com/
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
ILI2901 requires reset to pull down time greater than 10ms,
so the configuration post_power_delay_ms is 10, and the chipset
initial time is required to be greater than 100ms,
so the post_gpio_reset_on_delay_ms is set to 100.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the ishtp_cl_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the hid_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This commit adds a hotkey to switch between "gamepad" mode (mouse and keyboard
disabled) and "desktop" mode (gamepad disabled) by holding down the options
button (mapped here as the start button). This mirrors the behavior of the
official Steam client.
This also adds and uses a function for generating haptic pulses, as Steam also
does when engaging this hotkey.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The second byte of the GET_STRING_ATTRIB report is a length, so we should set
the size of the buffer to be the size we're actually requesting, and only
reject the reply if the length out is nonsensical.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
SDL includes a list of settings (formerly called registers in this driver),
reports (formerly cmds), and various other identifiers that were provided by
Valve. This commit imports a significant chunk of that list as well as
replacing most of the guessed names and a handful of magic constants. It also
replaces bitmask definitions that used hex with the BIT macro.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The client_opened variable was used to track if the hidraw was opened by any
clients to silence keyboard/mouse events while opened. However, there was no
counting of how many clients were opened, so opening two at the same time and
then closing one would fool the driver into thinking it had no remaining opened
clients.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This cleans up the locking logic so that the spinlock is consistently used for
access to a small handful of struct variables, and the mutex is exclusively and
consistently used for ensuring that mutliple threads aren't trying to
send/receive reports at the same time. Previously, only some report
transactions were guarded by this mutex, potentially breaking atomicity. The
mutex has been renamed to reflect this usage.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Steam Deck has a setting that controls whether or not the watchdog is
enabled, so instead of using a heartbeat to keep the watchdog from triggering,
this commit changes the behavior to simply disable the watchdog instead.
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The original implementation of this driver incorrectly guessed the function of
this register. It's not only unnecessary to write to this register for lizard
mode but actually counter-productive since it overwrites whatever previous
value was intentionally set, for example by Steam.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
