summaryrefslogtreecommitdiff
path: root/drivers/hsi
AgeCommit message (Collapse)AuthorFilesLines
2016-06-28HSI: omap_ssi: drop pm_runtime_irq_safeSebastian Reichel2-3/+0
pm_runtime_irq_safe increases the parents runtime usage counter effectively keeping the OMAP SoC from idling. Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: use rpm autosuspend APISebastian Reichel1-24/+44
Instead of immediately sending the SSI module to sleep, wait some time in case of new incoming or outgoing traffic. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi: call msg->complete() from process contextSebastian Reichel3-1/+25
msg->complete() should always be called from process context once irq_safe runtime pm flag is no longer set for omap-ssi. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: ensure clocks are kept enabled during transferSebastian Reichel1-0/+2
ensure, that clocks remain enabled, when a transfer is started. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: replace pm_runtime_put_sync with non-sync variantSebastian Reichel1-9/+9
There is no need to wait for hardware to really reach idle states, so just release runtime PM asynchronously. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: avoid calling runtime_pm_*_sync inside spinlockSebastian Reichel1-4/+4
runtime_pm_*_sync can block when irq_safe flag is removed from omap-ssi driver, so it may not be called while a spinlock is held. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: avoid pm_runtime_get_sync in ssi_start_dma and ssi_start_pioSebastian Reichel1-6/+24
These functions may be called from atomic context, so avoid synchronous runtime pm calls. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: switch to threaded pio irqSebastian Reichel2-38/+24
Move pio interrupt handler from tasklet into thread to allow runtime_pm_get_sync calls without irq_safe being set. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_core: remove pm_runtime_get_sync call from taskletSebastian Reichel1-1/+7
We may not call pm_runtime_get_sync() from tasklet, since it can block once pm_runtime_irq_safe is removed for omap-ssi. Since irq can should only be created for a running device, we assume, that the device is already running and use non- synchronous API instead. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_core: use pm_runtime_put instead of pm_runtime_put_syncSebastian Reichel1-5/+5
There is no need to disable the device synchronously, so don't do it. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: prepare start_tx/stop_tx for blocking pm_runtime callsSebastian Reichel2-5/+20
ssi_start_tx and ssi_stop_tx may be called from atomic context. Once pm_runtime_irq_safe() is removed for omap-ssi, this will fail, due to blocking pm_runtime_*_sync() calls. This fixes ssi_stop_tx by using non-sync API and ssi_start_tx by using a worker thread. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: core: switch port event notifier from atomic to blockingSebastian Reichel1-4/+4
port events should be sent from process context after irq_safe runtime pm flag is removed in omap-ssi. Signed-off-By: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: replace wkin_cken with atomic bitmap operationsSebastian Reichel2-15/+7
This simplifies the code and avoids holding a spin_lock when runtime pm calls are made. Once the irq_safe flag is removed for omap_ssi's runtime pm, pm_runtime_get/put_sync can sleep, which is a no-go while holding a spin_lock. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi: convert cawake irq handler to threadSebastian Reichel3-19/+8
Convert cawake interrupt handler from tasklet to threaded interrupt handler in preparation of blocking runtime_pm calls. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: ssi_protocol: fix ssip_xmit invocationSebastian Reichel1-1/+12
ssip_xmit should be called from process context, since it calls hsi_async_write. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: ssi_protocol: replace spin_lock with spin_lock_bhSebastian Reichel1-32/+32
To avoid setting irq_safe runtime pm flag in omap-ssi, multiple calls will be moved to process context. This also affects ssi-protocol, so use the safer spin_lock_bh instead of a simple spin_lock. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: ssi_protocol: avoid ssi_waketest call with held spinlockSebastian Reichel1-16/+25
This avoids calling ssi_waketest(), while a spinlock is being hold, since ssi_waketest may sleep once irq_safe runtime pm is disabled. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi: do not reset moduleSebastian Reichel2-20/+1
module reset and power management rule setup is already done by hwmod. Remove this cruft, which predates hwmod. Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: remove useless newlineSebastian Reichel1-4/+2
Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-15hsi: Build hsi_boardinfo.c into hsi core if enabledAndrew F. Davis2-1/+2
If the HSI core is built as a module hsi_boardinfo may still be built-in as its Kconfig type is bool, which can cause build issues. Fix this by building this code into the HSI core when enabled. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-06-10HSI: cmt_speech: Fix double spin_lockIago Abal1-1/+1
Release &hi->lock before calling `cs_hsi_control_read_error' to avoid deadlock. The bug was found using EBA (https://github.com/models-team/eba), which reported the following: Double lock first at drivers/hsi/clients/cmt_speech.c:443 second at drivers/hsi/clients/cmt_speech.c:447 In cs_hsi_read_on_control_complete defined at drivers/hsi/clients/cmt_speech.c:438: (!) drivers/hsi/clients/cmt_speech.c:443: spin_lock(& hi->lock); (?) drivers/hsi/clients/cmt_speech.c:445: msg->status == 4 -> true (!) drivers/hsi/clients/cmt_speech.c:447: cs_hsi_control_read_error(hi, msg); (!) drivers/hsi/clients/cmt_speech.c:407: __cs_hsi_error_pre(hi, msg, "control read", & hi->control_state); (!) drivers/hsi/clients/cmt_speech.c:382: spin_lock(& hi->lock); Signed-off-by: Iago Abal <mail@iagoabal.eu> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-29hsi: use kmemdupMuhammad Falak R Wani1-4/+4
Use kmemdup when some other buffer is immediately copied into allocated region. It replaces call to allocation followed by memcpy, by a single call to kmemdup. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-29HSI: cmt_speech: use vma_pages().Muhammad Falak R Wani1-1/+1
Replace explicit computation of vma page count by a call to vma_pages() Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-09HSI: omap-ssi: move omap_ssi_port_update_fclkArnd Bergmann1-18/+17
After the clk change support, the ssi omap ssi core driver now calls into the port driver to change fclk. This function was previously inside of an #ifdef, because it was only used when CONFIG_PM is enabled. Now it also gets used without power management support: drivers/hsi/built-in.o: In function `ssi_clk_event': omap_ssi_port.c:(.text+0x1bf8): undefined reference to `omap_ssi_port_update_fclk' This moves the function outside of the CONFIG_PM guard. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 4bcf7414528a ("HSI: omap-ssi: add clk change support") Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-09HSI: omap-ssi: include pinctrl header filesArnd Bergmann2-0/+2
The driver now uses some pinctrl functions, but fails to build if PINCTRL is disabled because the respective header files are only included indirectly: drivers/hsi/controllers/omap_ssi_core.c: In function 'ssi_clk_event': drivers/hsi/controllers/omap_ssi_core.c:317:4: error: implicit declaration of function 'pinctrl_pm_select_idle_state' [-Werror=implicit-function-declaration] drivers/hsi/controllers/omap_ssi_core.c:339:4: error: implicit declaration of function 'pinctrl_pm_select_default_state' [-Werror=implicit-function-declaration] drivers/hsi/controllers/omap_ssi_port.c: In function 'ssi_flush': drivers/hsi/controllers/omap_ssi_port.c:520:2: error: implicit declaration of function 'pinctrl_pm_select_idle_state' [-Werror=implicit-function-declaration] This includes the headers from the files that call the functions, which works even if pinctrl is turned off. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 4bcf7414528a ("HSI: omap-ssi: add clk change support") Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-09HSI: omap-ssi: add COMMON_CLK dependencyArnd Bergmann1-1/+2
Enabling the omap ssi driver without COMMON_CLK results in a build failure: drivers/hsi/controllers/omap_ssi_core.c: In function 'ssi_clk_event': drivers/hsi/controllers/omap_ssi_core.c:304:7: error: 'PRE_RATE_CHANGE' undeclared (first use in this function) This adds a Kconfig dependency to avoid the invalid configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 4bcf7414528a ("HSI: omap-ssi: add clk change support") Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02HSI: omap-ssi: add clk change supportSebastian Reichel3-0/+89
This adds support for frequency changes of the SSI functional clock, which may occur due to DVFS. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-By: Sebastian Reichel <sre@kernel.org>
2016-05-02HSI: omap_ssi: built omap_ssi and omap_ssi_port into one moduleSebastian Reichel5-23/+21
Merge omap_ssi and omap_ssi_port into one module. This fixes problems with module cycle dependencies introduced by future patches. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02HSI: omap_ssi: fix removal of port platform deviceSebastian Reichel1-0/+4
This avoids removal of the HSI port device when only the platform port device should be removed and clears the POPULATED bit in the DT node, so that a new platform device is created when the driver is probed again. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02HSI: omap_ssi: make sure probe stays availableSebastian Reichel2-17/+19
device can be unbind/rebind, so probe should stay available. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02HSI: omap_ssi: fix module unloadingSebastian Reichel1-3/+3
Removal of ssi controller debugfs directory must happen after the clients have been removed from it. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02HSI: omap_ssi_port: switch to gpiod APISebastian Reichel3-24/+12
Simplify driver by switching to new gpio descriptor based API. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-01-28HSI: ssi-protocol: Use handshake logic from n950Sebastian Reichel1-11/+5
When using the ssi-protocol driver with the Nokia N950, the following error is thrown during modem powered up sequence. [13852.274993] port0: SSI error: 0x01 [13852.279205] ssi-protocol ssi-protocol: RX error detected [13852.284820] ssi-protocol ssi-protocol: Main state: 1 [13852.290069] ssi-protocol ssi-protocol: Recv state: 0 [13852.295288] ssi-protocol ssi-protocol: Send state: 0 [13852.300537] ssi-protocol ssi-protocol: CMT Offline [13852.305603] ssi-protocol ssi-protocol: Wake test 1 [13852.310638] ssi-protocol ssi-protocol: Data RX id: 0 [13852.315887] ssi-protocol ssi-protocol: Data TX id: 0 [13856.001464] ssi-protocol ssi-protocol: Watchdog trigerred [13856.007293] ssi-protocol ssi-protocol: Main state: 1 [13856.012542] ssi-protocol ssi-protocol: Recv state: 0 [13856.017761] ssi-protocol ssi-protocol: Send state: 0 [13856.023010] ssi-protocol ssi-protocol: CMT Offline [13856.028045] ssi-protocol ssi-protocol: Wake test 0 [13856.033111] ssi-protocol ssi-protocol: Data RX id: 0 [13856.038330] ssi-protocol ssi-protocol: Data TX id: 0 This patch fixes the issue by using the handshake setup from the Nokia N950 kernel. The new handshake sequence also works with the N900, so there is no need to differentiate between both modems. Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-01-28HSI: nokia-modem: add n950 and n9 supportSebastian Reichel1-0/+2
The Nokia N950 and Nokia N9 also have a SSI connected modem, which use the same protocols as the Nokia N900, but with increased link speed (96000 kbps instead of 55000 kbps) and with less GPIOs. Since it's unclear, if the N950 and the N9 use exactly the same modem, each of them gets their own compatible string. Acked-by: Rob Herring <robh@kernel.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-01-07HSI: omap_ssi_port: fix handling of_get_named_gpio resultAndrzej Hajda1-4/+4
The function can return negative value. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-01-07HSI: omap_ssi: fix handling ida_simple_get resultAndrzej Hajda1-4/+3
The function can return negative value. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-10-30hsi: controllers:remove redundant codeSanjeev Sharma1-17/+4
Use devm_ioremap_resource() in order to make the code simpler, and remove redundant return value check of platform_get_resource() because this value is alreadytaken care by devm_ioremap_resource() Signed-off-by: Sanjeev Sharma <sanjeev_sharma@mentor.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-10-19hsi: correctly handle return value of kzallocInsu Yun1-1/+11
Since kzalloc can be failed in memory pressure, its return value should be checked and handled. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-10-14hsi: omap_ssi_port: Prevent warning if cawake_gpio is not defined.Roger Quadros1-1/+1
The error handling path is broken as cawake_gpio was defined as unsigned integer causing the following warnings on boards that don't use SSI port and so don't have cawake_gpio defined. e.g. beagleboard C4. [ 30.094635] WARNING: CPU: 0 PID: 322 at drivers/gpio/gpiolib.c:86 gpio_to_desc+0xa4/0xb8() [ 30.103363] invalid GPIO -2 [ 30.106292] Modules linked in: omap_ssi_port(+) cpufreq_dt cfbfillrect cfbimgblt leds_gpio cfbcopyarea thermal_sys led_class hwmon gpio_keys encoder_tfp410 connector_analog_tv connector_dvi omap_hdq snd phy_i [ 30.145477] CPU: 0 PID: 322 Comm: modprobe Not tainted 4.3.0-rc4-00030-gca978c0-dirty #335 [ 30.154174] Hardware name: Generic OMAP3-GP (Flattened Device Tree) [ 30.160827] [<c0016ef4>] (unwind_backtrace) from [<c00131f4>] (show_stack+0x10/0x14) [ 30.168975] [<c00131f4>] (show_stack) from [<c033cf08>] (dump_stack+0x80/0x9c) [ 30.176635] [<c033cf08>] (dump_stack) from [<c003e920>] (warn_slowpath_common+0x7c/0xb8) [ 30.185180] [<c003e920>] (warn_slowpath_common) from [<c003e9f0>] (warn_slowpath_fmt+0x30/0x40) [ 30.194366] [<c003e9f0>] (warn_slowpath_fmt) from [<c0376314>] (gpio_to_desc+0xa4/0xb8) [ 30.202819] [<c0376314>] (gpio_to_desc) from [<c0376ac8>] (gpio_request_one+0x14/0x11c) [ 30.211273] [<c0376ac8>] (gpio_request_one) from [<c037370c>] (devm_gpio_request_one+0x3c/0x78) [ 30.220458] [<c037370c>] (devm_gpio_request_one) from [<bf184210>] (ssi_port_probe+0x118/0x504 [omap_ssi_port]) [ 30.231170] [<bf184210>] (ssi_port_probe [omap_ssi_port]) from [<c03d4cfc>] (platform_drv_probe+0x48/0xa4) [ 30.241424] [<c03d4cfc>] (platform_drv_probe) from [<c03d3678>] (driver_probe_device+0x1dc/0x2a0) [ 30.250793] [<c03d3678>] (driver_probe_device) from [<c03d37d0>] (__driver_attach+0x94/0x98) [ 30.259643] [<c03d37d0>] (__driver_attach) from [<c03d1d60>] (bus_for_each_dev+0x54/0x88) [ 30.268249] [<c03d1d60>] (bus_for_each_dev) from [<c03d2d50>] (bus_add_driver+0xe8/0x1f8) [ 30.276916] [<c03d2d50>] (bus_add_driver) from [<c03d4118>] (driver_register+0x78/0xf4) [ 30.285369] [<c03d4118>] (driver_register) from [<c03d5380>] (__platform_driver_probe+0x34/0xd8) [ 30.294647] [<c03d5380>] (__platform_driver_probe) from [<c00097e4>] (do_one_initcall+0x80/0x1d8) [ 30.303985] [<c00097e4>] (do_one_initcall) from [<c011617c>] (do_init_module+0x5c/0x1cc) [ 30.312561] [<c011617c>] (do_init_module) from [<c00c7a68>] (load_module+0x18c8/0x1f0c) [ 30.320983] [<c00c7a68>] (load_module) from [<c00c8188>] (SyS_init_module+0xdc/0x150) [ 30.329223] [<c00c8188>] (SyS_init_module) from [<c000f7e0>] (ret_fast_syscall+0x0/0x1c) Fixes: b209e047bc743 ("HSI: Introduce OMAP SSI driver") Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-10-14hsi: fix double kfreeGeliang Tang1-1/+0
When device_register() fails, kfree() is called in hsi_client_release(), hence there is no need to call kfree in err3 again. Fixes: a2aa24734d9db ("HSI: Add common DT binding for HSI client devices") Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-19HSI: Fix a typoJakub Wilk1-1/+1
Signed-off-by: Jakub Wilk <jwilk@jwilk.net> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-10mm: mark most vm_operations_struct constKirill A. Shutemov1-1/+1
With two exceptions (drm/qxl and drm/radeon) all vm_operations_struct structs should be constant. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Minchan Kim <minchan@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-02Merge tag 'module-implicit-v4.1-rc8' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull implicit module.h fixes from Paul Gortmaker: "Fix up implicit <module.h> users that will break later. The files changed here are simply modular source files that are implicitly relying on <module.h> being present. We fix them up now, so that we can decouple some of the module related init code from the core init code in the future. The addition of the module.h include to several files here is also a no-op from a code generation point of view, else there would already be compile issues with these files today. There may be lots more implicit includes of <module.h> in tree, but these are the ones that extensive build test coverage has shown that must be fixed in order to avoid build breakage fallout for the pending module.h <---> init.h code relocation we desire to complete" * tag 'module-implicit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: frv: add module.h to mb93090-mb00/flash.c to avoid compile fail drivers/cpufreq: include <module.h> for modular exynos-cpufreq.c code drivers/staging: include <module.h> for modular android tegra_ion code crypto/asymmetric_keys: pkcs7_key_type needs module.h sh: mach-highlander/psw.c is tristate and should use module.h drivers/regulator: include <module.h> for modular max77802 code drivers/pcmcia: include <module.h> for modular xxs1500_ss code drivers/hsi: include <module.h> for modular omap_ssi code drivers/gpu: include <module.h> for modular rockchip code drivers/gpio: include <module.h> for modular crystalcove code drivers/clk: include <module.h> for clk-max77xxx modular code
2015-06-23HSI: nokia-modem: use flags argument of devm_gpiod_get to set directionUwe Kleine-König1-5/+2
Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Use this to simplify the driver. Furthermore this is one caller less that stops us making the flags argument to gpiod_get*() mandatory. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-06-23HSI: nokia-modem: Reduce missing driver message to debug levelSebastian Reichel1-2/+2
Reduce message priority from dev_err to dev_dbg for missing cmt-speech or ssi-protocol drivers, since they will be probed again and it may result in spamming the boot log. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-06-23HSI: cmt_speech: fix timestamp interfaceSebastian Reichel1-2/+7
The user interface for timestamps in the new cmt_speech driver is broken in multiple ways: - The layout is incompatible between 32-bit and 64-bit user space, because of the size differences in 'struct timespec'. This means that the driver can not work when used with 32-bit user space on a 64-bit kernel. - As there are plans to change 32-bit user space to use a 64-bit time_t type in the future, it will also be incompatible with new 32-bit user space. - It is using ktime_get_ts under it's deprecated alias (do_posix_clock_monotonic_gettime). To keep support for the user space tools written for this driver (which have lived many years out-of-tree), the interface has been hardened to unsigned 32-bit values. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-06-16drivers/hsi: include <module.h> for modular omap_ssi codePaul Gortmaker1-0/+1
These files are built off of a tristate Kconfig option and also contain modular function calls so they should explicitly include module.h to avoid compile breakage during header shuffles done in the future. We change the one header file wich gives us coverage on both files: drivers/hsi/controllers/omap_ssi.c drivers/hsi/controllers/omap_ssi_port.c Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-04-05HSI: cmt_speech: fix error return codeJulia Lawall1-0/+1
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-31HSI: nokia-modem: Add cmt-speech supportSebastian Reichel2-2/+32
Register cmt-speech driver in nokia-modem driver and forward hsi channel information. Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-31HSI: cmt_speech: Add cmt-speech driverKai Vehmanen3-0/+1467
Introduces the cmt-speech driver, which implements a character device interface for transferring speech data frames over HSI/SSI. The driver is used to exchange voice/speech data between the Nokia N900/N950/N9's modem and its cpu. Signed-off-by: Kai Vehmanen <kai.vehmanen@nokia.com> Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com> Signed-off-by: Joni Lapilainen <joni.lapilainen@gmail.com> Since the original driver has been written for 2.6.28 some build fixes and general cleanups have been added by me: * fix build for 4.0 kernel * replace GFP_ATOMIC with GFP_KERNEL in cs_alloc_cmds() * add sanity check for CS_SET_WAKELINE ioctl * cleanup driver initialisation * rename driver to cmt-speech to be consistent with ssi-protocol driver * move cs-protocol.h to include/uapi/linux/hsi, since it describes a userspace API * replace hardcoded channels numbers with values provided via the HSI framework (e.g. coming from DT) Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>