summaryrefslogtreecommitdiff
path: root/drivers/hv
AgeCommit message (Collapse)AuthorFilesLines
2023-04-28Merge tag 'hyperv-next-signed-20230424' of ↵Linus Torvalds8-425/+421
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - PCI passthrough for Hyper-V confidential VMs (Michael Kelley) - Hyper-V VTL mode support (Saurabh Sengar) - Move panic report initialization code earlier (Long Li) - Various improvements and bug fixes (Dexuan Cui and Michael Kelley) * tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits) PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg Drivers: hv: move panic report code from vmbus to hv early init code x86/hyperv: VTL support for Hyper-V Drivers: hv: Kconfig: Add HYPERV_VTL_MODE x86/hyperv: Make hv_get_nmi_reason public x86/hyperv: Add VTL specific structs and hypercalls x86/init: Make get/set_rtc_noop() public x86/hyperv: Exclude lazy TLB mode CPUs from enlightened TLB flushes x86/hyperv: Add callback filter to cpumask_to_vpset() Drivers: hv: vmbus: Remove the per-CPU post_msg_page clocksource: hyper-v: make sure Invariant-TSC is used if it is available PCI: hv: Enable PCI pass-thru devices in Confidential VMs Drivers: hv: Don't remap addresses that are above shared_gpa_boundary hv_netvsc: Remove second mapping of send and recv buffers Drivers: hv: vmbus: Remove second way of mapping ring buffers Drivers: hv: vmbus: Remove second mapping of VMBus monitor pages swiotlb: Remove bounce buffer remapping for Hyper-V Driver: VMBus: Add Devicetree support dt-bindings: bus: Add Hyper-V VMBus Drivers: hv: vmbus: Convert acpi_device to more generic platform_device ...
2023-04-28Merge tag 'sysctl-6.4-rc1' of ↵Linus Torvalds1-10/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "This only does a few sysctl moves from the kernel/sysctl.c file, the rest of the work has been put towards deprecating two API calls which incur recursion and prevent us from simplifying the registration process / saving memory per move. Most of the changes have been soaking on linux-next since v6.3-rc3. I've slowed down the kernel/sysctl.c moves due to Matthew Wilcox's feedback that we should see if we could *save* memory with these moves instead of incurring more memory. We currently incur more memory since when we move a syctl from kernel/sysclt.c out to its own file we end up having to add a new empty sysctl used to register it. To achieve saving memory we want to allow syctls to be passed without requiring the end element being empty, and just have our registration process rely on ARRAY_SIZE(). Without this, supporting both styles of sysctls would make the sysctl registration pretty brittle, hard to read and maintain as can be seen from Meng Tang's efforts to do just this [0]. Fortunately, in order to use ARRAY_SIZE() for all sysctl registrations also implies doing the work to deprecate two API calls which use recursion in order to support sysctl declarations with subdirectories. And so during this development cycle quite a bit of effort went into this deprecation effort. I've annotated the following two APIs are deprecated and in few kernel releases we should be good to remove them: - register_sysctl_table() - register_sysctl_paths() During this merge window we should be able to deprecate and unexport register_sysctl_paths(), we can probably do that towards the end of this merge window. Deprecating register_sysctl_table() will take a bit more time but this pull request goes with a few example of how to do this. As it turns out each of the conversions to move away from either of these two API calls *also* saves memory. And so long term, all these changes *will* prove to have saved a bit of memory on boot. The way I see it then is if remove a user of one deprecated call, it gives us enough savings to move one kernel/sysctl.c out from the generic arrays as we end up with about the same amount of bytes. Since deprecating register_sysctl_table() and register_sysctl_paths() does not require maintainer coordination except the final unexport you'll see quite a bit of these changes from other pull requests, I've just kept the stragglers after rc3" Link: https://lkml.kernel.org/r/ZAD+cpbrqlc5vmry@bombadil.infradead.org [0] * tag 'sysctl-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (29 commits) fs: fix sysctls.c built mm: compaction: remove incorrect #ifdef checks mm: compaction: move compaction sysctl to its own file mm: memory-failure: Move memory failure sysctls to its own file arm: simplify two-level sysctl registration for ctl_isa_vars ia64: simplify one-level sysctl registration for kdump_ctl_table utsname: simplify one-level sysctl registration for uts_kern_table ntfs: simplfy one-level sysctl registration for ntfs_sysctls coda: simplify one-level sysctl registration for coda_table fs/cachefiles: simplify one-level sysctl registration for cachefiles_sysctls xfs: simplify two-level sysctl registration for xfs_table nfs: simplify two-level sysctl registration for nfs_cb_sysctls nfs: simplify two-level sysctl registration for nfs4_cb_sysctls lockd: simplify two-level sysctl registration for nlm_sysctls proc_sysctl: enhance documentation xen: simplify sysctl registration for balloon md: simplify sysctl registration hv: simplify sysctl registration scsi: simplify sysctl registration with register_sysctl() csky: simplify alignment sysctl registration ...
2023-04-27Merge tag 'driver-core-6.4-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...
2023-04-25Merge tag 'x86_sev_for_v6.4_rc1' of ↵Linus Torvalds2-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV updates from Borislav Petkov: - Add the necessary glue so that the kernel can run as a confidential SEV-SNP vTOM guest on Hyper-V. A vTOM guest basically splits the address space in two parts: encrypted and unencrypted. The use case being running unmodified guests on the Hyper-V confidential computing hypervisor - Double-buffer messages between the guest and the hardware PSP device so that no partial buffers are copied back'n'forth and thus potential message integrity and leak attacks are possible - Name the return value the sev-guest driver returns when the hw PSP device hasn't been called, explicitly - Cleanups * tag 'x86_sev_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyperv: Change vTOM handling to use standard coco mechanisms init: Call mem_encrypt_init() after Hyper-V hypercall init is done x86/mm: Handle decryption/re-encryption of bss_decrypted consistently Drivers: hv: Explicitly request decrypted in vmap_pfn() calls x86/hyperv: Reorder code to facilitate future work x86/ioremap: Add hypervisor callback for private MMIO mapping in coco VM x86/sev: Change snp_guest_issue_request()'s fw_err argument virt/coco/sev-guest: Double-buffer messages crypto: ccp: Get rid of __sev_platform_init_locked()'s local function pointer crypto: ccp - Name -1 return value as SEV_RET_NO_FW_CALL
2023-04-21Drivers: hv: move panic report code from vmbus to hv early init codeLong Li3-235/+231
The panic reporting code was added in commit 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") It was added to the vmbus driver. The panic reporting has no dependence on vmbus, and can be enabled at an earlier boot time when Hyper-V is initialized. This patch moves the panic reporting code out of vmbus. There is no functionality changes. During moving, also refactored some cleanup functions into hv_kmsg_dump_unregister(). Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1682030946-6372-1-git-send-email-longli@linuxonhyperv.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-04-18Drivers: hv: Kconfig: Add HYPERV_VTL_MODESaurabh Sengar1-0/+24
Add HYPERV_VTL_MODE Kconfig flag for VTL mode. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1681192532-15460-5-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-04-17Drivers: hv: vmbus: Remove the per-CPU post_msg_pageDexuan Cui2-19/+5
The post_msg_page was introduced in 2014 in commit b29ef3546aec ("Drivers: hv: vmbus: Cleanup hv_post_message()") Commit 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments") introduced the hyperv_pcpu_input_arg in 2018, which can be used in hv_post_message(). Remove post_msg_page to simplify the code a little bit. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Jinank Jain <jinankjain@linux.microsoft.com> Link: https://lore.kernel.org/r/20230408213441.15472-1-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-04-17PCI: hv: Enable PCI pass-thru devices in Confidential VMsMichael Kelley1-1/+1
For PCI pass-thru devices in a Confidential VM, Hyper-V requires that PCI config space be accessed via hypercalls. In normal VMs, config space accesses are trapped to the Hyper-V host and emulated. But in a confidential VM, the host can't access guest memory to decode the instruction for emulation, so an explicit hypercall must be used. Add functions to make the new MMIO read and MMIO write hypercalls. Update the PCI config space access functions to use the hypercalls when such use is indicated by Hyper-V flags. Also, set the flag to allow the Hyper-V PCI driver to be loaded and used in a Confidential VM (a.k.a., "Isolation VM"). The driver has previously been hardened against a malicious Hyper-V host[1]. [1] https://lore.kernel.org/all/20220511223207.3386-2-parri.andrea@gmail.com/ Co-developed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-13-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-04-17Drivers: hv: Don't remap addresses that are above shared_gpa_boundaryMichael Kelley1-10/+13
With the vTOM bit now treated as a protection flag and not part of the physical address, avoid remapping physical addresses with vTOM set since technically such addresses aren't valid. Use ioremap_cache() instead of memremap() to ensure that the mapping provides decrypted access, which will correctly set the vTOM bit as a protection flag. While this change is not required for correctness with the current implementation of memremap(), for general code hygiene it's better to not depend on the mapping functions doing something reasonable with a physical address that is out-of-range. While here, fix typos in two error messages. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-12-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-04-17hv_netvsc: Remove second mapping of send and recv buffersMichael Kelley2-12/+0
With changes to how Hyper-V guest VMs flip memory between private (encrypted) and shared (decrypted), creating a second kernel virtual mapping for shared memory is no longer necessary. Everything needed for the transition to shared is handled by set_memory_decrypted(). As such, remove the code to create and manage the second mapping for the pre-allocated send and recv buffers. This mapping is the last user of hv_map_memory()/hv_unmap_memory(), so delete these functions as well. Finally, hv_map_memory() is the last user of vmap_pfn() in Hyper-V guest code, so remove the Kconfig selection of VMAP_PFN. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-11-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-04-17Drivers: hv: vmbus: Remove second way of mapping ring buffersMichael Kelley1-42/+20
With changes to how Hyper-V guest VMs flip memory between private (encrypted) and shared (decrypted), it's no longer necessary to have separate code paths for mapping VMBus ring buffers for for normal VMs and for Confidential VMs. As such, remove the code path that uses vmap_pfn(), and set the protection flags argument to vmap() to account for the difference between normal and Confidential VMs. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-10-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-04-17Drivers: hv: vmbus: Remove second mapping of VMBus monitor pagesMichael Kelley2-87/+28
With changes to how Hyper-V guest VMs flip memory between private (encrypted) and shared (decrypted), creating a second kernel virtual mapping for shared memory is no longer necessary. Everything needed for the transition to shared is handled by set_memory_decrypted(). As such, remove the code to create and manage the second mapping for VMBus monitor pages. Because set_memory_decrypted() and set_memory_encrypted() are no-ops in normal VMs, it's not even necessary to test for being in a Confidential VM (a.k.a., "Isolation VM"). Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-9-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-04-17Merge remote-tracking branch 'tip/x86/sev' into hyperv-nextWei Liu2-2/+1
Merge the following 6 patches from tip/x86/sev, which are taken from Michael Kelley's series [0]. The rest of Michael's series depend on them. x86/hyperv: Change vTOM handling to use standard coco mechanisms init: Call mem_encrypt_init() after Hyper-V hypercall init is done x86/mm: Handle decryption/re-encryption of bss_decrypted consistently Drivers: hv: Explicitly request decrypted in vmap_pfn() calls x86/hyperv: Reorder code to facilitate future work x86/ioremap: Add hypervisor callback for private MMIO mapping in coco VM 0: https://lore.kernel.org/linux-hyperv/1679838727-87310-1-git-send-email-mikelley@microsoft.com/
2023-04-17Driver: VMBus: Add Devicetree supportSaurabh Sengar2-6/+65
Update the driver to support Devicetree boot as well along with ACPI. At present the Devicetree parsing only provides the mmio region info and is not the exact copy of ACPI parsing. This is sufficient to cater all the current Devicetree usecases for VMBus. Currently Devicetree is supported only for x86 systems. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1679298460-11855-6-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-04-17Drivers: hv: vmbus: Convert acpi_device to more generic platform_deviceSaurabh Sengar1-23/+35
VMBus driver code currently has direct dependency on ACPI and struct acpi_device. As a staging step toward optionally configuring based on Devicetree instead of ACPI, use a more generic platform device to reduce the dependency on ACPI where possible, though the dependency on ACPI is not completely removed. Also rename the function vmbus_acpi_remove() to the more generic vmbus_mmio_remove(). Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1679298460-11855-4-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-04-13hv: simplify sysctl registrationLuis Chamberlain1-10/+1
register_sysctl_table() is a deprecated compatibility wrapper. register_sysctl() can do the directory creation for you so just use that. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Wei Liu <wei.liu@kernel.org>
2023-03-27x86/hyperv: Change vTOM handling to use standard coco mechanismsMichael Kelley1-1/+0
Hyper-V guests on AMD SEV-SNP hardware have the option of using the "virtual Top Of Memory" (vTOM) feature specified by the SEV-SNP architecture. With vTOM, shared vs. private memory accesses are controlled by splitting the guest physical address space into two halves. vTOM is the dividing line where the uppermost bit of the physical address space is set; e.g., with 47 bits of guest physical address space, vTOM is 0x400000000000 (bit 46 is set). Guest physical memory is accessible at two parallel physical addresses -- one below vTOM and one above vTOM. Accesses below vTOM are private (encrypted) while accesses above vTOM are shared (decrypted). In this sense, vTOM is like the GPA.SHARED bit in Intel TDX. Support for Hyper-V guests using vTOM was added to the Linux kernel in two patch sets[1][2]. This support treats the vTOM bit as part of the physical address. For accessing shared (decrypted) memory, these patch sets create a second kernel virtual mapping that maps to physical addresses above vTOM. A better approach is to treat the vTOM bit as a protection flag, not as part of the physical address. This new approach is like the approach for the GPA.SHARED bit in Intel TDX. Rather than creating a second kernel virtual mapping, the existing mapping is updated using recently added coco mechanisms. When memory is changed between private and shared using set_memory_decrypted() and set_memory_encrypted(), the PTEs for the existing kernel mapping are changed to add or remove the vTOM bit in the guest physical address, just as with TDX. The hypercalls to change the memory status on the host side are made using the existing callback mechanism. Everything just works, with a minor tweak to map the IO-APIC to use private accesses. To accomplish the switch in approach, the following must be done: * Update Hyper-V initialization to set the cc_mask based on vTOM and do other coco initialization. * Update physical_mask so the vTOM bit is no longer treated as part of the physical address * Remove CC_VENDOR_HYPERV and merge the associated vTOM functionality under CC_VENDOR_AMD. Update cc_mkenc() and cc_mkdec() to set/clear the vTOM bit as a protection flag. * Code already exists to make hypercalls to inform Hyper-V about pages changing between shared and private. Update this code to run as a callback from __set_memory_enc_pgtable(). * Remove the Hyper-V special case from __set_memory_enc_dec() * Remove the Hyper-V specific call to swiotlb_update_mem_attributes() since mem_encrypt_init() will now do it. * Add a Hyper-V specific implementation of the is_private_mmio() callback that returns true for the IO-APIC and vTPM MMIO addresses [1] https://lore.kernel.org/all/20211025122116.264793-1-ltykernel@gmail.com/ [2] https://lore.kernel.org/all/20211213071407.314309-1-ltykernel@gmail.com/ [ bp: Touchups. ] Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/1679838727-87310-7-git-send-email-mikelley@microsoft.com
2023-03-27Drivers: hv: Explicitly request decrypted in vmap_pfn() callsMichael Kelley1-1/+1
Update vmap_pfn() calls to explicitly request that the mapping be for decrypted access to the memory. There's no change in functionality since the PFNs passed to vmap_pfn() are above the shared_gpa_boundary, implicitly producing a decrypted mapping. But explicitly requesting "decrypted" allows the code to work before and after changes that cause vmap_pfn() to mask the PFNs to being below the shared_gpa_boundary. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-4-git-send-email-mikelley@microsoft.com
2023-03-23driver core: bus: mark the struct bus_type for sysfs callbacks as constantGreg Kroah-Hartman1-1/+1
struct bus_type should never be modified in a sysfs callback as there is nothing in the structure to modify, and frankly, the structure is almost never used in a sysfs callback, so mark it as constant to allow struct bus_type to be moved to read-only memory. Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Alison Schofield <alison.schofield@intel.com> Cc: Ben Widawsky <bwidawsk@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hu Haowen <src.res@email.cn> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Stuart Yoder <stuyoder@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Acked-by: Ilya Dryomov <idryomov@gmail.com> # rbd Acked-by: Ira Weiny <ira.weiny@intel.com> # cxl Reviewed-by: Alex Shi <alexs@kernel.org> Acked-by: Iwona Winiarska <iwona.winiarska@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi Link: https://lore.kernel.org/r/20230313182918.1312597-23-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-06Drivers: vmbus: Check for channel allocation before looking up relidsMohammed Gamal1-0/+4
relid2channel() assumes vmbus channel array to be allocated when called. However, in cases such as kdump/kexec, not all relids will be reset by the host. When the second kernel boots and if the guest receives a vmbus interrupt during vmbus driver initialization before vmbus_connect() is called, before it finishes, or if it fails, the vmbus interrupt service routine is called which in turn calls relid2channel() and can cause a null pointer dereference. Print a warning and error out in relid2channel() for a channel id that's invalid in the second kernel. Fixes: 8b6a877c060e ("Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels") Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/20230217204411.212709-1-mgamal@redhat.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-02-24Merge tag 'driver-core-6.3-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...
2023-02-22Merge tag 'hyperv-next-signed-20230220' of ↵Linus Torvalds5-17/+20
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - allow Linux to run as the nested root partition for Microsoft Hypervisor (Jinank Jain and Nuno Das Neves) - clean up the return type of callback functions (Dawei Li) * tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Fix hv_get/set_register for nested bringup Drivers: hv: Make remove callback of hyperv driver void returned Drivers: hv: Enable vmbus driver for nested root partition x86/hyperv: Add an interface to do nested hypercalls Drivers: hv: Setup synic registers in case of nested root partition x86/hyperv: Add support for detecting nested hypervisor
2023-02-03HV: hv_balloon: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman1-1/+1
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Fixes: d180e0a1be6c ("Drivers: hv: Create debugfs file with hyper-v balloon usage information") Cc: stable <stable@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20230202140918.2289522-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-27driver core: make struct bus_type.uevent() take a const *Greg Kroah-Hartman1-2/+2
The uevent() callback in struct bus_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17Drivers: hv: Make remove callback of hyperv driver void returnedDawei Li2-6/+2
Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. As such, change the remove function for Hyper-V VMBus based drivers to return void. Signed-off-by: Dawei Li <set_pte_at@outlook.com> Link: https://lore.kernel.org/r/TYCP286MB2323A93C55526E4DF239D3ACCAFA9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-01-17Drivers: hv: Enable vmbus driver for nested root partitionJinank Jain1-1/+1
Currently VMBus driver is not initialized for root partition but we need to enable the VMBus driver for nested root partition. This is required, so that L2 root can use the VMBus devices. Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/c3cdd2cf2bffeba388688640eb61bc182e4c041d.1672639707.git.jinankjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-01-17Drivers: hv: Setup synic registers in case of nested root partitionJinank Jain1-7/+11
Child partitions are free to allocate SynIC message and event page but in case of root partition it must use the pages allocated by Microsoft Hypervisor (MSHV). Base address for these pages can be found using synthetic MSRs exposed by MSHV. There is a slight difference in those MSRs for nested vs non-nested root partition. Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com> Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/cb951fb1ad6814996fc54f4a255c5841a20a151f.1672639707.git.jinankjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-01-12x86/hyperv: Add support for detecting nested hypervisorJinank Jain1-3/+6
Detect if Linux is running as a nested hypervisor in the root partition for Microsoft Hypervisor, using flags provided by MSHV. Expose a new variable hv_nested that is used later for decisions specific to the nested use case. Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/8e3e7112806e81d2292a66a56fe547162754ecea.1672639707.git.jinankjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-12-14Merge tag 'net-next-6.2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-12-13Merge tag 'acpi-6.2-rc1' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and PNP updates from Rafael Wysocki: "These include new code (for instance, support for the FFH address space type and support for new firmware data structures in ACPICA), some new quirks (mostly related to backlight handling and I2C enumeration), a number of fixes and a fair amount of cleanups all over. Specifics: - Update the ACPICA code in the kernel to the 20221020 upstream version and fix a couple of issues in it: - Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki) - Add support for loong_arch-specific APICs in MADT (Huacai Chen) - Add support for fixed PCIe wake event (Huacai Chen) - Add EBDA pointer sanity checks (Vit Kabele) - Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele) - Add CCEL table support to both compiler/disassembler (Kuppuswamy Sathyanarayanan) - Add a couple of new UUIDs to the known UUID list (Bob Moore) - Add support for FFH Opregion special context data (Sudeep Holla) - Improve warning message for "invalid ACPI name" (Bob Moore) - Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table (Alison Schofield) - Prepare IORT support for revision E.e (Robin Murphy) - Finish support for the CDAT table (Bob Moore) - Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki) - Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao) - Update the version of the ACPICA code in the kernel (Bob Moore) - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device enumeration code (Giulio Benetti) - Change the return type of the ACPI driver remove callback to void and update its users accordingly (Dawei Li) - Add general support for FFH address space type and implement the low- level part of it for ARM64 (Sudeep Holla) - Fix stale comments in the ACPI tables parsing code and make it print more messages related to MADT (Hanjun Guo, Huacai Chen) - Replace invocations of generic library functions with more kernel- specific counterparts in the ACPI sysfs interface (Christophe JAILLET, Xu Panda) - Print full name paths of ACPI power resource objects during enumeration (Kane Chen) - Eliminate a compiler warning regarding a missing function prototype in the ACPI power management code (Sudeep Holla) - Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong, Colin Ian King, Sudeep Holla) - Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC driver (Mia Kanashi) - Add some mew ACPI backlight handling quirks and update some existing ones (Hans de Goede) - Make the ACPI backlight driver prefer the native backlight control over vendor backlight control when possible (Hans de Goede) - Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König) - Use xchg_release() instead of cmpxchg() for updating new GHES cache slots (Ard Biesheuvel) - Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu) - Add new I2C device enumeration quirks for Medion Lifetab S10346 and Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede) - Make the ACPI battery driver notify user space about adding new battery hooks and removing the existing ones (Armin Wolf) - Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE() for freeing acpi_object structures to help diagnostics (Wang ShaoBo) - Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface code (ye xingchen) - Fix the _FIF package extraction failure handling in the ACPI fan driver (Hanjun Guo) - Fix the PCC mailbox handling error code path (Huisong Li) - Avoid using PCC Opregions if there is no platform interrupt allocated for this purpose (Huisong Li) - Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and CPPC library (ye xingchen) - Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng Wang) - Fix name memory leak in pnp_alloc_dev() (Yang Yingliang) - Do not disable PNP devices on suspend when they cannot be re-enabled on resume (Hans de Goede) - Clean up the ACPI thermal driver a bit (Rafael Wysocki)" * tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits) ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346 ACPI: APEI: EINJ: Refactor available_error_type_show() ACPI: APEI: EINJ: Fix formatting errors ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value ACPI: processor: perflib: Rearrange acpi_processor_notify_smm() ACPI: processor: perflib: Rearrange unregistration routine ACPI: processor: perflib: Drop redundant parentheses ACPI: processor: perflib: Adjust white space ACPI: processor: idle: Drop unnecessary statements and parens ACPI: thermal: Adjust critical.flags.valid check ACPI: fan: Convert to use sysfs_emit_at() API ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() ACPI: battery: Call power_supply_changed() when adding hooks ACPI: use sysfs_emit() instead of scnprintf() ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F) ACPI: APEI: Remove a useless include PNP: Do not disable devices on suspend when they cannot be re-enabled on resume ACPI: processor: Silence missing prototype warnings ACPI: processor_idle: Silence missing prototype warnings ACPI: PM: Silence missing prototype warning ...
2022-12-12Merge tag 'irq-core-2022-12-10' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt core and driver subsystem: The bulk is the rework of the MSI subsystem to support per device MSI interrupt domains. This solves conceptual problems of the current PCI/MSI design which are in the way of providing support for PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device. IMS (Interrupt Message Store] is a new specification which allows device manufactures to provide implementation defined storage for MSI messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified message store which is uniform accross all devices). The PCI/MSI[-X] uniformity allowed us to get away with "global" PCI/MSI domains. IMS not only allows to overcome the size limitations of the MSI-X table, but also gives the device manufacturer the freedom to store the message in arbitrary places, even in host memory which is shared with the device. There have been several attempts to glue this into the current MSI code, but after lengthy discussions it turned out that there is a fundamental design problem in the current PCI/MSI-X implementation. This needs some historical background. When PCI/MSI[-X] support was added around 2003, interrupt management was completely different from what we have today in the actively developed architectures. Interrupt management was completely architecture specific and while there were attempts to create common infrastructure the commonalities were rudimentary and just providing shared data structures and interfaces so that drivers could be written in an architecture agnostic way. The initial PCI/MSI[-X] support obviously plugged into this model which resulted in some basic shared infrastructure in the PCI core code for setting up MSI descriptors, which are a pure software construct for holding data relevant for a particular MSI interrupt, but the actual association to Linux interrupts was completely architecture specific. This model is still supported today to keep museum architectures and notorious stragglers alive. In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel, which was creating yet another architecture specific mechanism and resulted in an unholy mess on top of the existing horrors of x86 interrupt handling. The x86 interrupt management code was already an incomprehensible maze of indirections between the CPU vector management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X] implementation. At roughly the same time ARM struggled with the ever growing SoC specific extensions which were glued on top of the architected GIC interrupt controller. This resulted in a fundamental redesign of interrupt management and provided the today prevailing concept of hierarchical interrupt domains. This allowed to disentangle the interactions between x86 vector domain and interrupt remapping and also allowed ARM to handle the zoo of SoC specific interrupt components in a sane way. The concept of hierarchical interrupt domains aims to encapsulate the functionality of particular IP blocks which are involved in interrupt delivery so that they become extensible and pluggable. The X86 encapsulation looks like this: |--- device 1 [Vector]---[Remapping]---[PCI/MSI]--|... |--- device N where the remapping domain is an optional component and in case that it is not available the PCI/MSI[-X] domains have the vector domain as their parent. This reduced the required interaction between the domains pretty much to the initialization phase where it is obviously required to establish the proper parent relation ship in the components of the hierarchy. While in most cases the model is strictly representing the chain of IP blocks and abstracting them so they can be plugged together to form a hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware it's clear that the actual PCI/MSI[-X] interrupt controller is not a global entity, but strict a per PCI device entity. Here we took a short cut on the hierarchical model and went for the easy solution of providing "global" PCI/MSI domains which was possible because the PCI/MSI[-X] handling is uniform across the devices. This also allowed to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in turn made it simple to keep the existing architecture specific management alive. A similar problem was created in the ARM world with support for IP block specific message storage. Instead of going all the way to stack a IP block specific domain on top of the generic MSI domain this ended in a construct which provides a "global" platform MSI domain which allows overriding the irq_write_msi_msg() callback per allocation. In course of the lengthy discussions we identified other abuse of the MSI infrastructure in wireless drivers, NTB etc. where support for implementation specific message storage was just mindlessly glued into the existing infrastructure. Some of this just works by chance on particular platforms but will fail in hard to diagnose ways when the driver is used on platforms where the underlying MSI interrupt management code does not expect the creative abuse. Another shortcoming of today's PCI/MSI-X support is the inability to allocate or free individual vectors after the initial enablement of MSI-X. This results in an works by chance implementation of VFIO (PCI pass-through) where interrupts on the host side are not set up upfront to avoid resource exhaustion. They are expanded at run-time when the guest actually tries to use them. The way how this is implemented is that the host disables MSI-X and then re-enables it with a larger number of vectors again. That works by chance because most device drivers set up all interrupts before the device actually will utilize them. But that's not universally true because some drivers allocate a large enough number of vectors but do not utilize them until it's actually required, e.g. for acceleration support. But at that point other interrupts of the device might be in active use and the MSI-X disable/enable dance can just result in losing interrupts and therefore hard to diagnose subtle problems. Last but not least the "global" PCI/MSI-X domain approach prevents to utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS is not longer providing a uniform storage and configuration model. The solution to this is to implement the missing step and switch from global PCI/MSI domains to per device PCI/MSI domains. The resulting hierarchy then looks like this: |--- [PCI/MSI] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N which in turn allows to provide support for multiple domains per device: |--- [PCI/MSI] device 1 |--- [PCI/IMS] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N |--- [PCI/IMS] device N This work converts the MSI and PCI/MSI core and the x86 interrupt domains to the new model, provides new interfaces for post-enable allocation/free of MSI-X interrupts and the base framework for PCI/IMS. PCI/IMS has been verified with the work in progress IDXD driver. There is work in progress to convert ARM over which will replace the platform MSI train-wreck. The cleanup of VFIO, NTB and other creative "solutions" are in the works as well. Drivers: - Updates for the LoongArch interrupt chip drivers - Support for MTK CIRQv2 - The usual small fixes and updates all over the place" * tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits) irqchip/ti-sci-inta: Fix kernel doc irqchip/gic-v2m: Mark a few functions __init irqchip/gic-v2m: Include arm-gic-common.h irqchip/irq-mvebu-icu: Fix works by chance pointer assignment iommu/amd: Enable PCI/IMS iommu/vt-d: Enable PCI/IMS x86/apic/msi: Enable PCI/IMS PCI/MSI: Provide pci_ims_alloc/free_irq() PCI/MSI: Provide IMS (Interrupt Message Store) support genirq/msi: Provide constants for PCI/IMS support x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X PCI/MSI: Provide prepare_desc() MSI domain op PCI/MSI: Split MSI-X descriptor setup genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN genirq/msi: Provide msi_domain_alloc_irq_at() genirq/msi: Provide msi_domain_ops:: Prepare_desc() genirq/msi: Provide msi_desc:: Msi_data genirq/msi: Provide struct msi_map x86/apic/msi: Remove arch_create_remap_msi_irq_domain() ...
2022-12-12Merge branches 'acpi-scan', 'acpi-bus', 'acpi-tables' and 'acpi-sysfs'Rafael J. Wysocki1-3/+1
Merge ACPI changes related to device enumeration, device object managenet, operation region handling, table parsing and sysfs interface: - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device enumeration code (Giulio Benetti). - Change the return type of the ACPI driver remove callback to void and update its users accordingly (Dawei Li). - Add general support for FFH address space type and implement the low- level part of it for ARM64 (Sudeep Holla). - Fix stale comments in the ACPI tables parsing code and make it print more messages related to MADT (Hanjun Guo, Huacai Chen). - Replace invocations of generic library functions with more kernel- specific counterparts in the ACPI sysfs interface (Christophe JAILLET, Xu Panda). * acpi-scan: ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0) * acpi-bus: ACPI: FFH: Silence missing prototype warnings ACPI: make remove callback of ACPI driver void ACPI: bus: Fix the _OSC capability check for FFH OpRegion arm64: Add architecture specific ACPI FFH Opregion callbacks ACPI: Implement a generic FFH Opregion handler * acpi-tables: ACPI: tables: Fix the stale comments for acpi_locate_initial_tables() ACPI: tables: Print CORE_PIC information when MADT is parsed * acpi-sysfs: ACPI: sysfs: use sysfs_emit() to instead of scnprintf() ACPI: sysfs: Use kstrtobool() instead of strtobool()
2022-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-1/+6
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-28drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiersGuilherme G. Piccoli1-41/+64
Currently Hyper-V guests are among the most relevant users of the panic infrastructure, like panic notifiers, kmsg dumpers, etc. The reasons rely both in cleaning-up procedures (closing hypervisor <-> guest connection, disabling some paravirtualized timer) as well as to data collection (sending panic information to the hypervisor) and framebuffer management. The thing is: some notifiers are related to others, ordering matters, some functionalities are duplicated and there are lots of conditionals behind sending panic information to the hypervisor. As part of an effort to clean-up the panic notifiers mechanism and better document things, we hereby address some of the issues/complexities of Hyper-V panic handling through the following changes: (a) We have die and panic notifiers on vmbus_drv.c and both have goals of sending panic information to the hypervisor, though the panic notifier is also responsible for a cleaning-up procedure. This commit clears the code by splitting the panic notifier in two, one for closing the vmbus connection whereas the other is only for sending panic info to hypervisor. With that, it was possible to merge the die and panic notifiers in a single/well-documented function, and clear some conditional complexities on sending such information to the hypervisor. (b) There is a Hyper-V framebuffer panic notifier, which relies in doing a vmbus operation that demands a valid connection. So, we must order this notifier with the panic notifier from vmbus_drv.c, to guarantee that the framebuffer code executes before the vmbus connection is unloaded. Also, this commit removes a useless header. Although there is code rework and re-ordering, we expect that this change has no functional regressions but instead optimize the path and increase panic reliability on Hyper-V. This was tested on Hyper-V with success. Cc: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Tianyu Lan <Tianyu.Lan@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Fabio A M Martins <fabiomirmar@gmail.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220819221731.480795-11-gpiccoli@igalia.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-11-28video: hyperv_fb: Avoid taking busy spinlock on panic pathGuilherme G. Piccoli1-0/+13
The Hyper-V framebuffer code registers a panic notifier in order to try updating its fbdev if the kernel crashed. The notifier callback is straightforward, but it calls the vmbus_sendpacket() routine eventually, and such function takes a spinlock for the ring buffer operations. Panic path runs in atomic context, with local interrupts and preemption disabled, and all secondary CPUs shutdown. That said, taking a spinlock might cause a lockup if a secondary CPU was disabled with such lock taken. Fix it here by checking if the ring buffer spinlock is busy on Hyper-V framebuffer panic notifier; if so, bail-out avoiding the potential lockup scenario. Cc: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Michael Kelley <mikelley@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Tianyu Lan <Tianyu.Lan@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Tested-by: Fabio A M Martins <fabiomirmar@gmail.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220819221731.480795-10-gpiccoli@igalia.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-11-28hv_balloon: Add support for configurable order free page reportingShradha Gupta1-21/+73
Newer versions of Hyper-V allow reporting unused guest pages in chunks smaller than 2 Mbytes. Using smaller chunks allows reporting more unused guest pages, but with increased overhead in the finding the small chunks. To make this tradeoff configurable, use the existing page_reporting_order module parameter to control the reporting order. Drop and refine checks that restricted the minimun page reporting order to 2Mbytes size pages. Add appropriate checks to make sure the underlying Hyper-V versions support cold discard hints of any order (and not just starting from 9) Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1664517699-1085-3-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-11-23ACPI: make remove callback of ACPI driver voidDawei Li1-3/+1
For bus-based driver, device removal is implemented as: 1 device_remove()-> 2 bus->remove()-> 3 driver->remove() Driver core needs no inform from callee(bus driver) about the result of remove callback. In that case, commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned. Now we have the situation that both 1 & 2 of calling chain are void-returned, so it does not make much sense for 3(driver->remove) to return non-void to its caller. So the basic idea behind this change is making remove() callback of any bus-based driver to be void-returned. This change, for itself, is for device drivers based on acpi-bus. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dawei Li <set_pte_at@outlook.com> Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for drivers/platform/surface/* Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-11-21Drivers: hv: vmbus: fix possible memory leak in vmbus_device_register()Yang Yingliang1-0/+1
If device_register() returns error in vmbus_device_register(), the name allocated by dev_set_name() must be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(). Fixes: 09d50ff8a233 ("Staging: hv: make the Hyper-V virtual bus code build") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20221119081135.1564691-3-yangyingliang@huawei.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-11-21Drivers: hv: vmbus: fix double free in the error path of ↵Yang Yingliang1-1/+5
vmbus_add_channel_work() In the error path of vmbus_device_register(), device_unregister() is called, which calls vmbus_device_release(). The latter frees the struct hv_device that was passed in to vmbus_device_register(). So remove the kfree() in vmbus_add_channel_work() to avoid a double free. Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info") Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20221119081135.1564691-2-yangyingliang@huawei.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-11-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
include/linux/bpf.h 1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value") aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record") f71b2f64177a ("bpf: Refactor map->off_arr handling") https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17clocksource/drivers/hyper-v: Include asm/hyperv-tlfs.h not asm/mshyperv.hThomas Gleixner1-0/+1
clocksource/hyperv_timer.h is included into the VDSO build. It includes asm/mshyperv.h which in turn includes the world and some more. This worked so far by chance, but any subtle change in the include chain results in a build breakage because VDSO builds are building user space libraries. Include asm/hyperv-tlfs.h instead which contains everything what the VDSO build needs except the hv_get_raw_timer() define. Move this define into a separate header file, which contains the prerequisites (msr.h) and is included by clocksource/hyperv_timer.h. Fixup drivers/hv/vmbus_drv.c which relies on the indirect include of asm/mshyperv.h. With that the VDSO build only pulls in the minimum requirements. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/87fsemtut0.ffs@tglx
2022-10-31drivers: convert unsupported .adjfreq to .adjfineJacob Keller1-2/+2
A few PTP drivers implement a .adjfreq handler which indicates the operation is not supported. Convert all of these to .adjfine. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: Vivek Thampi <vithampi@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-27Drivers: hv: fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'of'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20221019125604.52999-1-yuanjilin@cdjrlc.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-10-10Merge tag 'hyperv-next-signed-20221009' of ↵Linus Torvalds2-31/+22
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Remove unnecessary delay while probing for VMBus (Stanislav Kinsburskiy) - Optimize vmbus_on_event (Saurabh Sengar) - Fix a race in Hyper-V DRM driver (Saurabh Sengar) - Miscellaneous clean-up patches from various people * tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Replace kmap() with kmap_local_page() drm/hyperv: Add ratelimit on error message hyperv: simplify and rename generate_guest_id Drivers: hv: vmbus: Split memcpy of flex-array scsi: storvsc: remove an extraneous "to" in a comment Drivers: hv: vmbus: Don't wait for the ACPI device upon initialization Drivers: hv: vmbus: Use PCI_VENDOR_ID_MICROSOFT for better discoverability Drivers: hv: vmbus: Fix kernel-doc drm/hyperv: Don't overwrite dirt_needed value set by host Drivers: hv: vmbus: Optimize vmbus_on_event
2022-09-30Merge branch 'acpi-dev'Rafael J. Wysocki1-1/+2
Merge changes regarding the management of ACPI device objects for 6.1-rc1: - Rename ACPI device object reference counting functions (Rafael Wysocki). - Rearrange ACPI device object initialization code (Rafael Wysocki). - Drop parent field from struct acpi_device (Rafael Wysocki). - Extend the the int3472-tps68470 driver to support multiple consumers of a single TPS68470 along with the requisite framework-level support (Daniel Scally). * acpi-dev: platform/x86: int3472: Add board data for Surface Go2 IR camera platform/x86: int3472: Support multiple gpio lookups in board data platform/x86: int3472: Support multiple clock consumers ACPI: bus: Add iterator for dependent devices ACPI: scan: Add acpi_dev_get_next_consumer_dev() ACPI: property: Use acpi_dev_parent() ACPI: Drop redundant acpi_dev_parent() header ACPI: PM: Fix NULL argument handling in acpi_device_get/set_power() ACPI: Drop parent field from struct acpi_device ACPI: scan: Eliminate __acpi_device_add() ACPI: scan: Rearrange initialization of ACPI device objects ACPI: scan: Rename acpi_bus_get_parent() and rearrange it ACPI: Rename acpi_bus_get/put_acpi_device()
2022-09-28Drivers: hv: vmbus: Split memcpy of flex-arrayKees Cook1-1/+2
To work around a misbehavior of the compiler's ability to see into composite flexible array structs (as detailed in the coming memcpy() hardening series[1]), split the memcpy() of the header and the payload so no false positive run-time overflow warning will be generated. This results in the already inlined memcpy getting unrolled a little more, which very slightly increases text size: $ size drivers/hv/vmbus_drv.o.before drivers/hv/vmbus_drv.o text data bss dec hex filename 22968 5239 232 28439 6f17 drivers/hv/vmbus_drv.o.before 23032 5239 232 28503 6f57 drivers/hv/vmbus_drv.o Avoids the run-time false-positive warning: memcpy: detected field-spanning write (size 212) of single field "&ctx->msg" at drivers/hv/vmbus_drv.c:1133 (size 16) [1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org/ Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: linux-hyperv@vger.kernel.org Reported-by: Nathan Chancellor <nathan@kernel.org> Reported-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220927211736.3241175-1-keescook@chromium.org Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-09-23Drivers: hv: vmbus: Don't wait for the ACPI device upon initializationStanislav Kinsburskiy1-9/+4
Waiting to 5 seconds in case of missing VMBus ACPI device is redundant as the device is either present already or won't be available at all. This patch enforces synchronous probing to make sure the bus traversal, happening upon driver registering will either find the device (if present) or not spend any additional time if device is absent. Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Stephen Hemminger <sthemmin@microsoft.com> CC: Wei Liu <wei.liu@kernel.org> CC: Dexuan Cui <decui@microsoft.com> CC: linux-hyperv@vger.kernel.org CC: linux-kernel@vger.kernel.org Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/166378554568.581670.1124852716698789244.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-09-23Drivers: hv: vmbus: Use PCI_VENDOR_ID_MICROSOFT for better discoverabilityEaswar Hariharan1-1/+1
pci_ids.h already defines PCI_VENDOR_ID_MICROSOFT, and is included via linux/pci.h. Use the define instead of the magic number. Signed-off-by: Easwar Hariharan <easwar.hariharan@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1663625084-2518-2-git-send-email-eahariha@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-09-23Drivers: hv: vmbus: Fix kernel-docJiapeng Chong1-1/+1
drivers/hv/vmbus_drv.c:1587: warning: expecting prototype for __vmbus_child_driver_register(). Prototype was for __vmbus_driver_register() instead. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2210 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220919063815.1881-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-09-23Drivers: hv: vmbus: Optimize vmbus_on_eventSaurabh Sengar1-19/+14
In the vmbus_on_event loop, 2 jiffies timer will not serve the purpose if callback_fn takes longer. For effective use move this check inside of callback functions where needed. Out of all the VMbus drivers using vmbus_on_event, only storvsc has a high packet volume, thus add this limit only in storvsc callback for now. There is no apparent benefit of loop itself because this tasklet will be scheduled anyway again if there are packets left in ring buffer. This patch removes this unnecessary loop as well. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1658741848-4210-1-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>