summaryrefslogtreecommitdiff
path: root/drivers/hwmon/mlxreg-fan.c
AgeCommit message (Collapse)AuthorFilesLines
2023-08-25hwmon: (mlxreg-fan) Extend number of supported fansVadim Pasternak1-1/+11
Some new big modular systems can be equipped with up to 24 fans. Extend maximum number of fans accordingly. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20230824164006.26868-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: mlxreg: constify pointers to hwmon_channel_infoKrzysztof Kozlowski1-1/+1
Statically allocated array of pointed to hwmon_channel_info can be made const for safety. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-12hwmon: (mlxreg-fan) Return zero speed for broken fanVadim Pasternak1-0/+6
Currently for broken fan driver returns value calculated based on error code (0xFF) in related fan speed register. Thus, for such fan user gets fan{n}_fault to 1 and fan{n}_input with misleading value. Add check for fan fault prior return speed value and return zero if fault is detected. Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20230212145730.24247-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (mlxreg-fan) Use pwm attribute for setting fan speed low limitVadim Pasternak1-57/+27
Recently 'cur_state' user space 'sysfs' interface 'sysfs' has been deprecated. This interface is used in Nvidia systems for setting fan speed limit. Currently fan speed limit is set from the user space by setting 'sysfs' 'cur_state' attribute to 'max_state + n', where 'n' is required limit, for example: 15 for 50% speed limit, 20 for full fan speed enforcement. The purpose of this feature is to provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units (PSU or line cards), high system ambient temperature, unreliable transceivers temperature sensing or some other factors which indirectly impacts system's airflow. The motivation is to support fan low limit feature through 'hwmon' interface. Use 'hwmon' 'pwm' attribute for setting low limit for fan speed in case 'thermal' subsystem is configured in kernel. In this case setting fan speed through 'hwmon' will never let the 'thermal' subsystem to select a lower duty cycle than the duty cycle selected with the 'pwm' attribute. From other side, fan speed is to be updated in hardware through 'pwm' only in case the requested fan speed is above last speed set by 'thermal' subsystem, otherwise requested fan speed will be just stored with no PWM update. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20220126141825.13545-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (mlxreg-fan) Support distinctive names per different cooling devicesVadim Pasternak1-2/+9
Provide different names for cooling devices registration to allow binding each cooling devices to relevant thermal zone. Thus, specific cooling device can be associated with related thermal sensor by setting thermal cooling device type for example to "mlxreg_fan2" and passing this type to thermal_zone_bind_cooling_device() through 'cdev->type'. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210926053541.1806937-3-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (mlxreg-fan) Modify PWM connectivity validationVadim Pasternak1-3/+8
Validate PWM connectivity only for additional PWM - "pwm1" is connected on all systems, while "pwm2" - "pwm4" are optional. Validate connectivity only for optional attributes by reading of related "pwm{n}" registers - in case "pwm{n}" is not connected, register value is supposed to be 0xff. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210926053541.1806937-2-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (mlxreg-fan) Fix out of bounds read on array fan->pwmColin Ian King1-1/+1
Array fan->pwm[] is MLXREG_FAN_MAX_PWM elements in size, however the for-loop has a off-by-one error causing index i to be out of range causing an out of bounds read on the array. Fix this by replacing the <= operator with < in the for-loop. Addresses-Coverity: ("Out-of-bounds read") Reported-by: Vadim Pasternak <vadimp@nvidia.com> Fixes: 35edbaab3bbf ("hwmon: (mlxreg-fan) Extend driver to support multiply cooling devices") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210920180921.16246-1-colin.king@canonical.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (mlxreg-fan) Extend driver to support multiply cooling devicesVadim Pasternak1-26/+47
Add support for additional cooling devices in order to support the systems, which can be equipped with up-to four PWM controllers. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (mlxreg-fan) Extend driver to support multiply PWMVadim Pasternak1-12/+43
Add additional PWM attributes in order to support the systems, which can be equipped with up-to four PWM controllers. System capability of additional PWM support is validated through the reading of relevant registers. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210916194719.871413-3-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (mlxreg-fan) Extend the maximum number of tachometersVadim Pasternak1-1/+3
Extend support of maximum tachometers from 12 to 14 in order to support new systems, equipped with more fans. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210916194719.871413-2-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-09-17hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced ↵Vadim Pasternak1-3/+9
from sysfs Fan speed minimum can be enforced from sysfs. For example, setting current fan speed to 20 is used to enforce fan speed to be at 100% speed, 19 - to be not below 90% speed, etcetera. This feature provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units or high system ambient temperature. Request for changing fan minimum speed is configuration request and can be set only through 'sysfs' write procedure. In this situation value of argument 'state' is above nominal fan speed maximum. Return non-zero code in this case to avoid thermal_cooling_device_stats_update() call, because in this case statistics update violates thermal statistics table range. The issues is observed in case kernel is configured with option CONFIG_THERMAL_STATISTICS. Here is the trace from KASAN: [ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444 [ 159.545625] Call Trace: [ 159.548366] dump_stack+0x92/0xc1 [ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.635869] thermal_zone_device_update+0x345/0x780 [ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0 [ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core] [ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core] [ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core] [ 160.070233] RIP: 0033:0x7fd995909970 [ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff .. [ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970 [ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001 [ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700 [ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013 [ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013 [ 160.143671] [ 160.145338] Allocated by task 2924: [ 160.149242] kasan_save_stack+0x19/0x40 [ 160.153541] __kasan_kmalloc+0x7f/0xa0 [ 160.157743] __kmalloc+0x1a2/0x2b0 [ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0 [ 160.167687] __thermal_cooling_device_register+0x1b5/0x500 [ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0 [ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan] [ 160.248140] [ 160.249807] The buggy address belongs to the object at ffff888116163400 [ 160.249807] which belongs to the cache kmalloc-1k of size 1024 [ 160.263814] The buggy address is located 64 bytes to the right of [ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800) [ 160.277536] The buggy address belongs to the page: [ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160 [ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0 [ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0 [ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000 [ 160.327033] page dumped because: kasan: bad access detected [ 160.333270] [ 160.334937] Memory state around the buggy address: [ 160.356469] >ffff888116163800: fc .. Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210916183151.869427-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (mlxreg-fan) Add support for fan drawers capability and present registersVadim Pasternak1-1/+50
Add support for fan drawer's capability and present registers in order to set mapping between the fan drawers and tachometers. Some systems are equipped with fan drawers with one tachometer inside. Others with fan drawers with several tachometers inside. Using present register along with tachometer-to-drawer mapping allows to skip reading missed tachometers and expose input for them as zero, instead of exposing fault code returned by hardware. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210322172237.2213584-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-05-16Merge branch 'linus' of ↵Linus Torvalds1-21/+10
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal soc updates from Eduardo Valentin: - thermal core has a new devm_* API for registering cooling devices. I took the entire series, that is why you see changes on drivers/hwmon in this pull (Guenter Roeck) - rockchip thermal driver gains support to PX30 SoC (Elaine Zhang) - the generic-adc thermal driver now considers the lookup table DT property as optional (Jean-Francois Dagenais) - Refactoring of tsens thermal driver (Amit Kucheria) - Cleanups on cpu cooling driver (Daniel Lezcano) - broadcom thermal driver dropped support to ACPI (Srinath Mannam) - tegra thermal driver gains support to OC hw throttle and GPU throtle (Wei Ni) - Fixes in several thermal drivers. * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (59 commits) hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register hwmon: (npcm750-pwm-fan) Use devm_thermal_of_cooling_device_register hwmon: (mlxreg-fan) Use devm_thermal_of_cooling_device_register hwmon: (gpio-fan) Use devm_thermal_of_cooling_device_register hwmon: (aspeed-pwm-tacho) Use devm_thermal_of_cooling_device_register thermal: rcar_gen3_thermal: Fix to show correct trip points number thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power thermal: rockchip: Support the PX30 SoC in thermal driver dt-bindings: rockchip-thermal: Support the PX30 SoC compatible thermal: rockchip: fix up the tsadc pinctrl setting error thermal: broadcom: Remove ACPI support thermal: Fix build error of missing devm_ioremap_resource on UM thermal/drivers/cpu_cooling: Remove pointless field thermal/drivers/cpu_cooling: Add Software Package Data Exchange (SPDX) thermal/drivers/cpu_cooling: Fixup the header and copyright thermal/drivers/cpu_cooling: Remove pointless test in power2state() thermal: rcar_gen3_thermal: disable interrupt in .remove thermal: rcar_gen3_thermal: fix interrupt type thermal: Introduce devm_thermal_of_cooling_device_register ...
2019-05-14hwmon: (mlxreg-fan) Use devm_thermal_of_cooling_device_registerGuenter Roeck1-21/+10
Call devm_thermal_of_cooling_device_register() to register the cooling device. Also introduce struct device *dev = &pdev->dev; to make the code easier to read. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-04-16hwmon: (mlxreg-fan) Use HWMON_CHANNEL_INFO macroGuenter Roeck1-33/+15
The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-16hwmon: (mlxreg-fan) Add support for fan capability registersVadim Pasternak1-5/+68
Add support for fan capability registers in order to distinct between the systems which have minor fan configuration differences. This reduces the amount of code used to describe such systems. The capability registers provides system specific information about the number of physically connected tachometers and system specific fan speed scale parameter. For example one system can be equipped with twelve fan tachometers, while the other with for example, eight or six. Or one system should use default fan speed divider value, while the other has a scale parameter defined in hardware, which should be used for divider setting. Reading this information from the capability registers allows to use the same fan structure for the systems with the such differences. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-12-17hwmon: (mlxreg-fan) Modify macros for tachometer fault status readingVadim Pasternak1-1/+1
Modify macros for tachometer fault status reading for making it more simple and clear. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-11-16hwmon: (mlxreg-fan) Fix macros for tacho fault readingVadim Pasternak1-1/+1
Fix macros for tacometer fault reading. This fix is relevant for three Mellanox systems MQMB7, MSN37, MSN34, which are about to be released to the customers. At the moment, none of them is at customers sites. Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-09hwmon: (mlxreg-fan) Add support for Mellanox FAN driverVadim Pasternak1-0/+489
Driver obtains PWM and tachometers registers location according to the system configuration and creates FAN/PWM hwmon objects and a cooling device. PWM and tachometers are controlled through the on-board programmable device, which exports its register map. This device could be attached to any bus type, for which register mapping is supported. Single instance is created with one PWM control, up to 12 tachometers and one cooling device. It could be as many instances as programmable device supports. Currently driver will be activated from the Mellanox platform driver: drivers/platform/x86/mlx-platform.c. For the future ARM based systems it could be activated from the ARM platform module. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>