summaryrefslogtreecommitdiff
path: root/drivers/hwspinlock
AgeCommit message (Collapse)AuthorFilesLines
2015-07-01hwspinlock: qcom: Correct msb in regmap_fieldBjorn Andersson1-1/+1
msb of the regmap_field was mistakenly given the value 32, to set all bits in the regmap update mask; although incorrect this worked until 921cc294, where the mask calculation was corrected. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-06-12hwspinlock: add a CSR atlas7 driverWei Chen3-0/+149
Add hwspinlock support for the CSR atlas7 SoC. The Hardware Spinlock device on atlas7 provides hardware assistance for synchronization between the multiple processors in the system (dual Cortex-A7, CAN bus Cortex-M3 and audio DSP). Reviewed-by: Suman Anna <s-anna@ti.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Wei Chen <wei.chen@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-05-02hwspinlock: qcom: Add support for Qualcomm HW Mutex blockBjorn Andersson3-0/+194
Add driver for Qualcomm Hardware Mutex block found in many Qualcomm SoCs. Based on initial effort by Kumar Gala <galak@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Andy Gross <agross@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-05-02hwspinlock/omap: add support for dt nodesSuman Anna1-4/+14
HwSpinlock IP is present only on OMAP4 and other newer SoCs, which are all device-tree boot only. This patch adds the base support for parsing the DT nodes, and removes the code dealing with the traditional platform device instantiation. Signed-off-by: Suman Anna <s-anna@ti.com> [tony@atomide.com: ack for legacy file removal] Acked-by: Tony Lindgren <tony@atomide.com> [comment on the imperfect always-zero base_id] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-05-02hwspinlock/core: add device tree supportSuman Anna1-0/+79
This patch adds a new OF-friendly API of_hwspin_lock_get_id() for hwspinlock clients to use/request locks from a hwspinlock device instantiated through a device-tree blob. This new API can be used by hwspinlock clients to get the id for a specific lock using the phandle + args specifier, so that it can be requested using the available hwspin_lock_request_specific() API. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> [small comment clarification] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2014-10-20hwspinlock: drop owner assignment from platform_driversWolfram Sang2-2/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-29hwspinlock: enable OMAP build for AM33xx, AM43xx & DRA7xxSuman Anna1-1/+1
HwSpinlocks are supported on TI's AM33xx, AM43xx and DRA7xx SoC device families as well. The IPs are identical to that of OMAP4/OMAP5, except for the number of locks. Add a depends on to the above family of SoCs to enable the build support for OMAP hwspinlock driver for any of the above SoC configs. Signed-off-by: Suman Anna <s-anna@ti.com> [small commit log changes] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2014-07-29hwspinlock/omap: enable module before reading SYSSTATUS registerSuman Anna1-7/+20
The number of hwspinlocks are determined based on the value read from the IP block's SYSSTATUS register. However, the module may not be enabled and clocked, and the read may result in a bus error. This particular issue is seen rather easily on AM33XX, since the module wakeup is software controlled, and it is disabled out of reset. Make sure the module is enabled and clocked before reading the SYSSTATUS register. Signed-off-by: Suman Anna <s-anna@ti.com> [replace pm_runtime_put_sync with lenient pm_runtime_put] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-05-08Merge tag 'hwspinlock-3.10' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock Pullhwspinlock update from Ohad Ben-Cohen: "A single patch from Vincent extending OMAP's hwspinlock support to OMAP5" * tag 'hwspinlock-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock: hwspinlock/omap: support OMAP5 as well
2013-04-05hwspinlock: fix __hwspin_lock_request error pathLi Fei1-0/+2
Even in failed case of pm_runtime_get_sync, the usage_count is incremented. In order to keep the usage_count with correct value and runtime power management to behave correctly, call pm_runtime_put_noidle in such case. In __hwspin_lock_request, module_put is also called before return in pm_runtime_get_sync failed case. Cc: stable@vger.kernel.org Signed-off-by Liu Chuansheng <chuansheng.liu@intel.com> Signed-off-by: Li Fei <fei.li@intel.com> [edit commit log] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-05hwspinlock/omap: support OMAP5 as wellVincent Stehlé1-1/+1
OMAP5 has spinlocks, too. Signed-off-by: Vincent Stehlé <v-stehle@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-11-28hwspinlock: remove use of __devexitBill Pemberton2-2/+2
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28hwspinlock: remove use of __devinitBill Pemberton2-2/+2
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28hwspinlock: remove use of __devexit_pBill Pemberton2-2/+2
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10hwspinlock/core: move the dereference below the NULL testWei Yongjun1-1/+2
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-07hwspinlock/core: use global ID to register hwspinlocks on multiple devicesShinya Kuribayashi1-2/+2
Commit 300bab9770 (hwspinlock/core: register a bank of hwspinlocks in a single API call, 2011-09-06) introduced 'hwspin_lock_register_single()' to register numerous (a bank of) hwspinlock instances in a single API, 'hwspin_lock_register()'. At which time, 'hwspin_lock_register()' accidentally passes 'local IDs' to 'hwspin_lock_register_single()', despite that ..._single() requires 'global IDs' to register hwspinlocks. We have to convert into global IDs by supplying the missing 'base_id'. Cc: stable <stable@vger.kernel.org> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> [ohad: fix error path of hwspin_lock_register, too] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-11-09Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: drivers/media: video/a5k6aa is a module and so needs module.h mfd: fix build failures in recently added ab5500 code hwspinlock/u8500: include linux/module.h MTD: MAPS: bcm963xx-flash.c: explicitly include module.h
2011-11-08hwspinlock/u8500: fix build error due to undefined labelAxel Lin1-4/+2
Fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c: In function 'u8500_hsem_probe': drivers/hwspinlock/u8500_hsem.c:113: error: label 'free_state' used but not defined Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-11-08hwspinlock/u8500: include linux/module.hAxel Lin1-0/+1
Include module.h to fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c:177: error: 'THIS_MODULE' undeclared here (not in a function) [...] drivers/hwspinlock/u8500_hsem.c:196: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/hwspinlock/u8500_hsem.c:196: warning: function declaration isn't a prototype make[2]: *** [drivers/hwspinlock/u8500_hsem.o] Error 1 make[1]: *** [drivers/hwspinlock] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-21hwspinlock/omap: omap_hwspinlock_remove should be __devexitOhad Ben-Cohen1-2/+2
Mark omap_hwspinlock_remove with __devexit (and use __devexit_p appropriately) so the function can be discarded when the conditions are met. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21hwspinlock/u8500: add hwspinlock driverMathieu J. Poirier3-0/+210
Add hwspinlock driver for U8500's Hsem hardware. At this point only HSem's protocol 1 is used (i.e. no interrupts). Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> [ohad@wizery.com: adopt recent hwspin_lock_{un}register API changes] [ohad@wizery.com: set the owner member of the driver] [ohad@wizery.com: mark ->remove() function as __devexit] [ohad@wizery.com: write commit log] [ohad@wizery.com: small cleanups] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21hwspinlock/core: register a bank of hwspinlocks in a single API callOhad Ben-Cohen3-123/+166
Hardware Spinlock devices usually contain numerous locks (known devices today support between 32 to 256 locks). Originally hwspinlock core required drivers to register (and later, when needed, unregister) each lock separately. That worked, but required hwspinlocks drivers to do a bit extra work when they were probed/removed. This patch changes hwspin_lock_{un}register() to allow a bank of hwspinlocks to be {un}registered in a single invocation. A new 'struct hwspinlock_device', which contains an array of 'struct hwspinlock's is now being passed to the core upon registration (so instead of wrapping each struct hwspinlock, a priv member has been added to allow drivers to piggyback their private data with each hwspinlock). While at it, several per-lock members were moved to be per-device: 1. struct device *dev 2. struct hwspinlock_ops *ops In addition, now that the array of locks is handled by the core, there's no reason to maintain a per-lock 'int id' member: the id of the lock anyway equals to its index in the bank's array plus the bank's base_id. Remove this per-lock id member too, and instead use a simple pointers arithmetic to derive it. As a result of this change, hwspinlocks drivers are now simpler and smaller (about %20 code reduction) and the memory footprint of the hwspinlock framework is reduced. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21hwspinlock/core: use a mutex to protect the radix treeJuan Gutierrez1-25/+20
Since we're using non-atomic radix tree allocations, we should be protecting the tree using a mutex and not a spinlock. Non-atomic allocations and process context locking is good enough, as the tree is manipulated only when locks are registered/ unregistered/requested/freed. The locks themselves are still protected by spinlocks of course, and mutexes are not involved in the locking/unlocking paths. Cc: <stable@kernel.org> Signed-off-by: Juan Gutierrez <jgutierrez@ti.com> [ohad@wizery.com: rewrite the commit log, #include mutex.h, add minor commentary] [ohad@wizery.com: update register/unregister parts in hwspinlock.txt] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21hwspinlock/core/omap: fix id issues on multiple hwspinlock devicesOhad Ben-Cohen2-1/+7
hwspinlock devices provide system-wide hardware locks that are used by remote processors that have no other way to achieve synchronization. To achieve that, each physical lock must have a system-wide id number that is agreed upon, otherwise remote processors can't possibly assume they're using the same hardware lock. Usually boards have a single hwspinlock device, which provides several hwspinlocks, and in this case, they can be trivially numbered 0 to (num-of-locks - 1). In case boards have several hwspinlocks devices, a different base id should be used for each hwspinlock device (they can't all use 0 as a starting id!). While this is certainly not common, it's just plain wrong to just silently use 0 as a base id whenever the hwspinlock driver is probed. This patch provides a hwspinlock_pdata structure, that boards can use to set a different base id for each of the hwspinlock devices they may have, and demonstrates how to use it with the omap hwspinlock driver. While we're at it, make sure the hwspinlock core prints an explicit error message in case an hwspinlock is registered with an id number that already exists; this will help users catch such base id issues. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Tony Lindgren <tony@atomide.com>
2011-09-21hwspinlock/omap: simplify allocation schemeOhad Ben-Cohen1-34/+17
Instead of allocating every hwspinlock separately, allocate them all in one shot. This both simplifies the driver and helps achieving better slab utilization. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21hwspinlock/core: simplify 'owner' handlingOhad Ben-Cohen3-6/+4
Use struct device_driver's owner member instead of asking drivers to explicitly pass the owner again. This simplifies drivers and also save some memory, since there's no point now in maintaining a separate owner pointer per hwspinlock. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21hwspinlock/core: simplify KconfigOhad Ben-Cohen1-9/+7
Simplify hwspinlock's Kconfig by making the global CONFIG_HWSPINLOCK entry invisible; users will just select it when needed. This also prepares the ground for adding hwspinlock support for other platforms (the 'depends on ARCH_OMAP4' was rather hideous, and while we're at it, a dedicated menu is added). Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-03-19hwspinlock: depend on OMAP4Ohad Ben-Cohen1-0/+1
Currently only OMAP4 supports hwspinlocks, so don't bother asking anyone else. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17drivers: hwspinlock: add OMAP implementationSimon Que3-0/+241
Add hwspinlock support for the OMAP4 Hardware Spinlock device. The Hardware Spinlock device on OMAP4 provides hardware assistance for synchronization between the multiple processors in the system (dual Cortex-A9, dual Cortex-M3 and a C64x+ DSP). [ohad@wizery.com: adapt to hwspinlock framework, tidy up] Signed-off-by: Simon Que <sque@ti.com> Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Krishnamoorthy, Balaji T <balajitk@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17drivers: hwspinlock: add frameworkOhad Ben-Cohen4-0/+627
Add a platform-independent hwspinlock framework. Hardware spinlock devices are needed, e.g., in order to access data that is shared between remote processors, that otherwise have no alternative mechanism to accomplish synchronization and mutual exclusion operations. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Hari Kanigeri <h-kanigeri2@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tony Lindgren <tony@atomide.com>