summaryrefslogtreecommitdiff
path: root/drivers/hwtracing
AgeCommit message (Collapse)AuthorFilesLines
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva4-7/+4
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-21coresight: etm4x: Fix save/restore during cpu idleSuzuki K Poulose2-9/+9
The ETM state save/restore incorrectly reads/writes some of the 64bit registers (e.g, address comparators, vmid/cid comparators etc.) using 32bit accesses. Ensure we use the appropriate width accessors for the registers. Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-18-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21coresight: etm: perf: Add default sink selection to etm perfMike Leach1-3/+14
Add default sink selection to the perf trace handling in the etm driver. Uses the select default sink infrastructure to select a sink for the perf session, if no other sink is specified. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-17-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21coresight: tmc: Update sink types for default selectionMike Leach1-1/+2
An additional sink subtype is added to differentiate ETB/ETF buffer sinks and ETR type system memory sinks. This allows the prioritised selection of default sinks. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-16-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21coresight: Add default sink selection to CoreSight baseMike Leach2-0/+168
Adds a method to select a suitable sink connected to a given source. In cases where no sink is defined, the coresight_find_default_sink routine can search from a given source, through the child connections until a suitable sink is found. The suitability is defined in by the sink coresight_dev_subtype on the CoreSight device, and the distance from the source by counting connections. Higher value subtype is preferred - where these are equal, shorter distance from source is used as a tie-break. This allows for default sink to be discovered were none is specified (e.g. perf command line) Signed-off-by: Mike Leach <mike.leach@linaro.org> Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-15-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21coresight: tmc: Fix TMC mode read in tmc_read_unprepare_etb()Sai Prakash Ranjan1-7/+6
Reading TMC mode register without proper coresight power management can lead to exceptions like the one in the call trace below in tmc_read_unprepare_etb() when the trace data is read after the sink is disabled. So fix this by having a check for coresight sysfs mode before reading TMC mode management register in tmc_read_unprepare_etb() similar to tmc_read_prepare_etb(). SError Interrupt on CPU6, code 0xbe000411 -- SError pstate: 80400089 (Nzcv daIf +PAN -UAO) pc : tmc_read_unprepare_etb+0x74/0x108 lr : tmc_read_unprepare_etb+0x54/0x108 sp : ffffff80d9507c30 x29: ffffff80d9507c30 x28: ffffff80b3569a0c x27: 0000000000000000 x26: 00000000000a0001 x25: ffffff80cbae9550 x24: 0000000000000010 x23: ffffffd07296b0f0 x22: ffffffd0109ee028 x21: 0000000000000000 x20: ffffff80d19e70e0 x19: ffffff80d19e7080 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: dfffffd000000001 x9 : 0000000000000000 x8 : 0000000000000002 x7 : ffffffd071d0fe78 x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : ffffffd071d0fe98 x2 : 0000000000000000 x1 : 0000000000000004 x0 : 0000000000000001 Kernel panic - not syncing: Asynchronous SError Interrupt Fixes: 4525412a5046 ("coresight: tmc: making prepare/unprepare functions generic") Reported-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-14-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21coresight: tmc: Add shutdown callback for TMC ETRSai Prakash Ranjan3-1/+25
Implement a shutdown callback to ensure ETR hardware is properly shutdown in reboot/shutdown path. This is required for ETR which has SMMU address translation enabled like on SC7180 SoC and few others. If the hardware is still accessing memory after SMMU translation is disabled as part of SMMU shutdown callback in system reboot or shutdown path, then IOVAs(I/O virtual address) which it was using will go on the bus as the physical addresses which might result in unknown crashes (NoC/interconnect errors). So we make sure from this shutdown callback that the ETR is shutdown before SMMU translation is disabled and device_link in SMMU driver will take care of ordering of shutdown callbacks such that SMMU shutdown callback is not called before any of its consumer shutdown callbacks. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-13-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21coresight: etmv4: Counter values not saved on disableMike Leach1-0/+6
The counter value registers change during operation, however this change is not reflected in the values seen by the user in sysfs. This fixes the issue by reading back the values on disable. Signed-off-by: Mike Leach <mike.leach@linaro.org> Fixes: 2e1cdfe184b52 ("coresight-etm4x: Adding CoreSight ETM4x driver") Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-11-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21coresight: etmv4: Fix resource selector constantMike Leach1-2/+2
ETMv4 max resource selector constant incorrectly set to 16. Updated to the correct 32 value, and adjustments made to limited code using it. Signed-off-by: Mike Leach <mike.leach@linaro.org> Fixes: 2e1cdfe184b52 ("coresight-etm4x: Adding CoreSight ETM4x driver") Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-10-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21coresight: Drop double check for ACPI companion deviceAndy Shevchenko1-2/+0
acpi_dev_get_resources() does perform the NULL pointer check against ACPI companion device which is given as function parameter. Thus, there is no need to duplicate this check in the caller. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-9-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21coresight: Use devm_kcalloc() in coresight_alloc_conns()Xu Wang1-3/+2
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-8-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21coresight: replicator: Reset replicator if context is lostSai Prakash Ranjan1-17/+38
On some QCOM SoCs, replicators in Always-On domain loses its context as soon as the clock is disabled. Currently as a part of pm_runtime workqueue, clock is disabled after the replicator is initialized by amba_pm_runtime_suspend assuming that context is not lost which is not true for replicators with such limitations. So add a new property "qcom,replicator-loses-context" to identify such replicators and reset them. Suggested-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-6-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21coresight: etm4x: Add support to skip trace unit power upTingwei Zhang2-10/+20
On some Qualcomm Technologies Inc. SoCs like SC7180, there exists a hardware errata where the APSS (Application Processor SubSystem)/CPU watchdog counter is stopped when the trace unit power up ETM register is set (TRCPDCR.PU = 1). Since the ETMs share the same power domain as that of respective CPU cores, they are powered on when the CPU core is powered on. So we can skip powering up of trace unit after checking for this errata via new property called "qcom,skip-power-up". Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Co-developed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-4-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21coresight: catu: Use CS_AMBA_ID macro for id tableSai Prakash Ranjan1-4/+1
Use CS_AMBA_ID macro for coresight catu AMBA id table instead of open coding. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21coresight: replicator: Use CS_AMBA_ID macro for id tableSai Prakash Ranjan1-10/+3
Use CS_AMBA_ID macro for dynamic replicator AMBA id table instead of open coding. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10intel_th: Fix a NULL dereference when hub driver is not loadedAlexander Shishkin2-6/+19
Connecting master to an output port when GTH driver module is not loaded triggers a NULL dereference: > RIP: 0010:intel_th_set_output+0x35/0x70 [intel_th] > Call Trace: > ? sth_stm_link+0x12/0x20 [intel_th_sth] > stm_source_link_store+0x164/0x270 [stm_core] > dev_attr_store+0x17/0x30 > sysfs_kf_write+0x3e/0x50 > kernfs_fop_write+0xda/0x1b0 > __vfs_write+0x1b/0x40 > vfs_write+0xb9/0x1a0 > ksys_write+0x67/0xe0 > __x64_sys_write+0x1a/0x20 > do_syscall_64+0x57/0x1d0 > entry_SYSCALL_64_after_hwframe+0x44/0xa9 Make sure the module in question is loaded and return an error if not. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 39f4034693b7c ("intel_th: Add driver infrastructure for Intel(R) Trace Hub devices") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Ammy Yi <ammy.yi@intel.com> Tested-by: Ammy Yi <ammy.yi@intel.com> Cc: stable@vger.kernel.org # v4.4 Link: https://lore.kernel.org/r/20200706161339.55468-5-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10intel_th: pci: Add Emmitsburg PCH supportAlexander Shishkin1-0/+5
This adds support for the Trace Hub in Emmitsburg PCH. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org # v4.14+ Link: https://lore.kernel.org/r/20200706161339.55468-4-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10intel_th: pci: Add Tiger Lake PCH-H supportAlexander Shishkin1-0/+5
This adds support for the Trace Hub in Tiger Lake PCH-H. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org # v4.14+ Link: https://lore.kernel.org/r/20200706161339.55468-3-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10intel_th: pci: Add Jasper Lake CPU supportAlexander Shishkin1-0/+5
This adds support for the Trace Hub in Jasper Lake CPU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org # v4.14+ Link: https://lore.kernel.org/r/20200706161339.55468-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-01coresight: etmv4: Fix CPU power management setup in probe() functionMike Leach1-29/+53
The current probe() function calls a pair of cpuhp_xxx API functions to setup CPU hotplug handling. The hotplug lock is held for the duration of the two calls and other CPU related code using cpus_read_lock() / cpus_read_unlock() calls. The problem is that on error states, goto: statements bypass the cpus_read_unlock() call. This code has increased in complexity as the driver has developed. This patch introduces a pair of helper functions etm4_pm_setup_cpuslocked() and etm4_pm_clear() which correct the issues above and group the PM code a little better. The two functions etm4_cpu_pm_register() and etm4_cpu_pm_unregister() are dropped as these call cpu_pm_register_notifier() / ..unregister_notifier() dependent on CONFIG_CPU_PM - but this define is used to nop these functions out in the pm headers - so the wrapper functions are superfluous. Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states") Fixes: e9f5d63f84fe ("hwtracing/coresight-etm4x: Use cpuhp_setup_state_nocalls_cpuslocked()") Fixes: 58eb457be028 ("hwtracing/coresight-etm4x: Convert to hotplug state machine") Signed-off-by: Mike Leach <mike.leach@linaro.org> Cc: stable <stable@vger.kernel.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200701160852.2782823-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-01coresight: cti: Fix error handling in probeDan Carpenter1-42/+54
There were a couple problems with error handling in the probe function: 1) If the "drvdata" allocation failed then it lead to a NULL dereference. 2) On several error paths we decremented "nr_cti_cpu" before it was incremented which lead to a reference counting bug. There were also some parts of the error handling which were not bugs but were messy. The error handling was confusing to read. It printed some unnecessary error messages. The simplest way to fix these problems was to create a cti_pm_setup() function that did all the power management setup in one go. That way when we call cti_pm_release() we don't have to deal with the complications of a partially configured power management config. I reversed the "if (drvdata->ctidev.cpu >= 0)" condition in cti_pm_release() so that it mirros the new cti_pm_setup() function. Fixes: 6a0953ce7de9 ("coresight: cti: Add CPU idle pm notifer to CTI devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200701160852.2782823-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-16stm class: Replace zero-length array with flexible-arrayGustavo A. R. Silva2-3/+3
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-07Merge tag 'char-misc-5.8-rc1' of ↵Linus Torvalds15-106/+619
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
2020-06-02Merge tag 'docs-5.8' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "A fair amount of stuff this time around, dominated by yet another massive set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes" * tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits) Documentation: fixes to the maintainer-entry-profile template zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst tracing: Fix events.rst section numbering docs: acpi: fix old http link and improve document format docs: filesystems: add info about efivars content Documentation: LSM: Correct the basic LSM description mailmap: change email for Ricardo Ribalda docs: sysctl/kernel: document unaligned controls Documentation: admin-guide: update bug-hunting.rst docs: sysctl/kernel: document ngroups_max nvdimm: fixes to maintainter-entry-profile Documentation/features: Correct RISC-V kprobes support entry Documentation/features: Refresh the arch support status files Revert "docs: sysctl/kernel: document ngroups_max" docs: move locking-specific documents to locking/ docs: move digsig docs to the security book docs: move the kref doc into the core-api book docs: add IRQ documentation at the core-api book docs: debugging-via-ohci1394.txt: add it to the core-api book docs: fix references for ipmi.rst file ...
2020-05-19coresight: cti: Add CPU idle pm notifer to CTI devicesMike Leach1-0/+69
Adds a notify callback for CPU PM events to the CTI driver - for CPU bound CTI devices. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-24-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: cti: Add CPU Hotplug handling to CTI driverMike Leach1-0/+92
Adds registration of CPU start and stop functions to CPU hotplug mechanisms - for any CPU bound CTI. Sets CTI powered flag according to state. Will enable CTI on CPU start if there are existing enable requests. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-23-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etm4x: Fix use-after-free of per-cpu etm drvdataSuzuki K Poulose1-0/+1
etm probe could be deferred due to the dependency in the trace path chain and may be retried. We need to clear the per-cpu etmdrvdata entry for the etm in case of a failure to avoid use-after-free cases as reported below: KASAN use-after-free bug in etm4_cpu_pm_notify(): [ 8.574566] coresight etm0: CPU0: ETM v4.2 initialized [ 8.581920] BUG: KASAN: use-after-free in etm4_cpu_pm_notify+0x580/0x2024 [ 8.581925] Read of size 8 at addr ffffff813304f8c8 by task swapper/3/0 [ 8.581927] [ 8.581934] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G S W 5.4.28 #314 [ 8.587775] coresight etm1: CPU1: ETM v4.2 initialized [ 8.594195] Call trace: [ 8.594205] dump_backtrace+0x0/0x188 [ 8.594209] show_stack+0x20/0x2c [ 8.594216] dump_stack+0xdc/0x144 [ 8.594227] print_address_description+0x3c/0x494 [ 8.594232] __kasan_report+0x144/0x168 [ 8.601598] coresight etm2: CPU2: ETM v4.2 initialized [ 8.602563] kasan_report+0x10/0x18 [ 8.602568] check_memory_region+0x1a4/0x1b4 [ 8.602572] __kasan_check_read+0x18/0x24 [ 8.602577] etm4_cpu_pm_notify+0x580/0x2024 [ 8.665945] notifier_call_chain+0x5c/0x90 [ 8.670166] __atomic_notifier_call_chain+0x90/0xf8 [ 8.675182] cpu_pm_notify+0x40/0x6c [ 8.678858] cpu_pm_enter+0x38/0x80 [ 8.682451] psci_enter_idle_state+0x34/0x70 [ 8.686844] cpuidle_enter_state+0xb8/0x20c [ 8.691143] cpuidle_enter+0x38/0x4c [ 8.694820] call_cpuidle+0x3c/0x68 [ 8.698408] do_idle+0x1a0/0x280 [ 8.701729] cpu_startup_entry+0x24/0x28 [ 8.705768] secondary_start_kernel+0x15c/0x170 [ 8.710423] [ 8.711972] Allocated by task 242: [ 8.715473] __kasan_kmalloc+0xf0/0x1ac [ 8.719426] kasan_slab_alloc+0x14/0x1c [ 8.723375] __kmalloc_track_caller+0x23c/0x388 [ 8.728040] devm_kmalloc+0x38/0x94 [ 8.731632] etm4_probe+0x48/0x3c8 [ 8.735140] amba_probe+0xbc/0x158 [ 8.738645] really_probe+0x144/0x408 [ 8.742412] driver_probe_device+0x70/0x140 [ 8.746716] __device_attach_driver+0x9c/0x110 [ 8.751287] bus_for_each_drv+0x90/0xd8 [ 8.755236] __device_attach+0xb4/0x164 [ 8.759188] device_initial_probe+0x20/0x2c [ 8.763490] bus_probe_device+0x34/0x94 [ 8.767436] device_add+0x34c/0x3e0 [ 8.771029] amba_device_try_add+0x68/0x440 [ 8.775332] amba_deferred_retry_func+0x48/0xc8 [ 8.779997] process_one_work+0x344/0x648 [ 8.784127] worker_thread+0x2ac/0x47c [ 8.787987] kthread+0x128/0x138 [ 8.791313] ret_from_fork+0x10/0x18 [ 8.794993] [ 8.796532] Freed by task 242: [ 8.799684] __kasan_slab_free+0x15c/0x22c [ 8.803897] kasan_slab_free+0x10/0x1c [ 8.807761] kfree+0x25c/0x4bc [ 8.810913] release_nodes+0x240/0x2b0 [ 8.814767] devres_release_all+0x3c/0x54 [ 8.818887] really_probe+0x178/0x408 [ 8.822661] driver_probe_device+0x70/0x140 [ 8.826963] __device_attach_driver+0x9c/0x110 [ 8.831539] bus_for_each_drv+0x90/0xd8 [ 8.835487] __device_attach+0xb4/0x164 [ 8.839431] device_initial_probe+0x20/0x2c [ 8.843732] bus_probe_device+0x34/0x94 [ 8.847678] device_add+0x34c/0x3e0 [ 8.851274] amba_device_try_add+0x68/0x440 [ 8.855576] amba_deferred_retry_func+0x48/0xc8 [ 8.860240] process_one_work+0x344/0x648 [ 8.864366] worker_thread+0x2ac/0x47c [ 8.868228] kthread+0x128/0x138 [ 8.871557] ret_from_fork+0x10/0x18 [ 8.875231] [ 8.876782] The buggy address belongs to the object at ffffff813304f800 [ 8.876782] which belongs to the cache kmalloc-1k of size 1024 [ 8.889632] The buggy address is located 200 bytes inside of [ 8.889632] 1024-byte region [ffffff813304f800, ffffff813304fc00) [ 8.901761] The buggy address belongs to the page: [ 8.906695] page:ffffffff04ac1200 refcount:1 mapcount:0 mapping:ffffff8146c03800 index:0x0 compound_mapcount: 0 [ 8.917047] flags: 0x4000000000010200(slab|head) [ 8.921799] raw: 4000000000010200 dead000000000100 dead000000000122 ffffff8146c03800 [ 8.929753] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 [ 8.937703] page dumped because: kasan: bad access detected [ 8.943433] [ 8.944974] Memory state around the buggy address: [ 8.949903] ffffff813304f780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 8.957320] ffffff813304f800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.964742] >ffffff813304f880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.972157] ^ [ 8.977886] ffffff813304f900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.985298] ffffff813304f980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.992713] ================================================================== Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states") Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-22-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Avoid casting void pointersStephen Boyd1-3/+6
We don't need to cast void pointers, such as the amba_id data. Assign to a local variable to make the code prettier and also return NULL instead of 0 to make sparse happy. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Reviewed-by: Joe Perches <joe@perches.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-21-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Include required headers in C filesStephen Boyd4-2/+33
We should include headers that C files use in the C files that use them and avoid relying on implicit includes as much as possible. This helps avoid compiler errors in the future about missing declarations when header files change includes in the future. Cc: Douglas Anderson <dianders@chromium.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-20-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Initialize arg in sparse friendly wayStephen Boyd2-2/+2
Sparse gets annoyed when this initializer is 0 but the first struct member is a pointer. Just use { } to initialize instead so that sparse is quiet. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-19-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Don't initialize variables unnecessarilyStephen Boyd1-4/+4
These variables are assigned again before they're used. Leave them unassigned at first so that the compiler can detect problems in the future with use before initialization. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-18-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Mark some functions staticStephen Boyd4-6/+5
These functions aren't used outside the file they're in. Mark them static to indicate as such and silence tools like sparse. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> [Dropped changes in coresight-cti.c and coresight-etb10.c] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-17-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etm4x: Add support for Neoverse N1 ETMAnurag Koul1-0/+1
Add PID for Arm Neoverse N1 ETM to the list of supported/known ETMs. Signed-off-by: Anurag Koul <anurag.koul@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-16-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etmv4: Update default filter and initialisationMike Leach2-18/+7
Differing default states set on driver init / perf init and as a result of a sysfs reset. The ETMv4 can be programmed to trace the entire instruction address range without the need to use address comparator filter resources. (Described in the ETMv4.x technical reference manual) sysfs reset was using this method, perf and default driver init were setup with an address range comparator for the entire address range. The perf / driver init has been altered to use the method without needing any comparator address hardware. Minor adjustment to the vinst_ctrl register initialisation to ensure correct zero initialisation. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-15-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: tmc: Fix TMC mode read in tmc_read_prepare_etb()Sai Prakash Ranjan1-8/+8
On some QCOM platforms like SC7180, SDM845 and SM8150, reading TMC mode register without proper coresight power management can lead to async exceptions like the one in the call trace below in tmc_read_prepare_etb(). This can happen if the user tries to read the TMC etf data via device node without setting up source and the sink first. Fix this by having a check for coresight sysfs mode before reading TMC mode management register. Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 7 PID: 2605 Comm: hexdump Tainted: G S 5.4.30 #122 Call trace: dump_backtrace+0x0/0x188 show_stack+0x20/0x2c dump_stack+0xdc/0x144 panic+0x168/0x36c panic+0x0/0x36c arm64_serror_panic+0x78/0x84 do_serror+0x130/0x138 el1_error+0x84/0xf8 tmc_read_prepare_etb+0x88/0xb8 tmc_open+0x40/0xd8 misc_open+0x120/0x158 chrdev_open+0xb8/0x1a4 do_dentry_open+0x268/0x3a0 vfs_open+0x34/0x40 path_openat+0x39c/0xdf4 do_filp_open+0x90/0x10c do_sys_open+0x150/0x3e8 __arm64_compat_sys_openat+0x28/0x34 el0_svc_common+0xa8/0x160 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x10 Fixes: 4525412a5046 ("coresight: tmc: making prepare/unprepare functions generic") Reported-by: Stephen Boyd <swboyd@chromium.org> Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-14-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Fix support for sparsely populated portsSuzuki K Poulose2-26/+66
On some systems the firmware may not describe all the ports connected to a component (e.g, for security reasons). This could be especially problematic for "funnels" where we could end up in modifying memory beyond the allocated space for refcounts. e.g, for a funnel with input ports listed 0, 3, 5, nr_inport = 3. However the we could access refcnts[5] while checking for references, like : [ 526.110401] ================================================================== [ 526.117988] BUG: KASAN: slab-out-of-bounds in funnel_enable+0x54/0x1b0 [ 526.124706] Read of size 4 at addr ffffff8135f9549c by task bash/1114 [ 526.131324] [ 526.132886] CPU: 3 PID: 1114 Comm: bash Tainted: G S 5.4.25 #232 [ 526.140397] Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT) [ 526.147113] Call trace: [ 526.149653] dump_backtrace+0x0/0x188 [ 526.153431] show_stack+0x20/0x2c [ 526.156852] dump_stack+0xdc/0x144 [ 526.160370] print_address_description+0x3c/0x494 [ 526.165211] __kasan_report+0x144/0x168 [ 526.169170] kasan_report+0x10/0x18 [ 526.172769] check_memory_region+0x1a4/0x1b4 [ 526.177164] __kasan_check_read+0x18/0x24 [ 526.181292] funnel_enable+0x54/0x1b0 [ 526.185072] coresight_enable_path+0x104/0x198 [ 526.189649] coresight_enable+0x118/0x26c ... [ 526.237782] Allocated by task 280: [ 526.241298] __kasan_kmalloc+0xf0/0x1ac [ 526.245249] kasan_kmalloc+0xc/0x14 [ 526.248849] __kmalloc+0x28c/0x3b4 [ 526.252361] coresight_register+0x88/0x250 [ 526.256587] funnel_probe+0x15c/0x228 [ 526.260365] dynamic_funnel_probe+0x20/0x2c [ 526.264679] amba_probe+0xbc/0x158 [ 526.268193] really_probe+0x144/0x408 [ 526.271970] driver_probe_device+0x70/0x140 ... [ 526.316810] [ 526.318364] Freed by task 0: [ 526.321344] (stack is not available) [ 526.325024] [ 526.326580] The buggy address belongs to the object at ffffff8135f95480 [ 526.326580] which belongs to the cache kmalloc-128 of size 128 [ 526.339439] The buggy address is located 28 bytes inside of [ 526.339439] 128-byte region [ffffff8135f95480, ffffff8135f95500) [ 526.351399] The buggy address belongs to the page: [ 526.356342] page:ffffffff04b7e500 refcount:1 mapcount:0 mapping:ffffff814b00c380 index:0x0 compound_mapcount: 0 [ 526.366711] flags: 0x4000000000010200(slab|head) [ 526.371475] raw: 4000000000010200 ffffffff05034008 ffffffff0501eb08 ffffff814b00c380 [ 526.379435] raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000 [ 526.387393] page dumped because: kasan: bad access detected [ 526.393128] [ 526.394681] Memory state around the buggy address: [ 526.399619] ffffff8135f95380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.407046] ffffff8135f95400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.414473] >ffffff8135f95480: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.421900] ^ [ 526.426029] ffffff8135f95500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.433456] ffffff8135f95580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.440883] ================================================================== To keep the code simple, we now track the maximum number of possible input/output connections to/from this component @ nr_inport and nr_outport in platform_data, respectively. Thus the output connections could be sparse and code is adjusted to skip the unspecified connections. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-13-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etb10: Make coresight_etb_groups staticJason Yan1-1/+1
Fix the following sparse warning: drivers/hwtracing/coresight/coresight-etb10.c:720:30: warning: symbol 'coresight_etb_groups' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-12-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: cti: Make some symbols staticJason Yan1-3/+3
Fix the following sparse warning: drivers/hwtracing/coresight/coresight-cti.c:22:1: warning: symbol 'ect_net' was not declared. Should it be static? drivers/hwtracing/coresight/coresight-cti.c:625:32: warning: symbol 'cti_ops_ect' was not declared. Should it be static? drivers/hwtracing/coresight/coresight-cti.c:630:28: warning: symbol 'cti_ops' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-11-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etm4x: Replace ETM PIDs with UCI IDs for Kryo385Sai Prakash Ranjan1-2/+2
Replace the AMBA ETM PIDs with UCI IDs to avoid future conflicts when adding the CTI support for QCOM Kryo385 CPU cores. Fixes: 17b4add0d4e0 ("coresight: etm4x: Add ETM PIDs for SDM845 and MSM8996") Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-10-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etm4x: Add support for Qualcomm SC7180 SoCSai Prakash Ranjan1-0/+2
Add ETM UCI IDs for Qualcomm SC7180 SoC. It has 2 big CPU cores based on Cortex-A76 and 6 LITTLE CPU cores based on Cortex-A55. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-9-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: cti: Add in sysfs links to other coresight devicesMike Leach1-4/+48
Adds in sysfs links for connections where the connected device is another coresight device. This allows examination of the coresight topology. Non-coresight connections remain just as a reference name. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-6-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Expose device connections via sysfsSuzuki K Poulose3-12/+119
Coresight device connections are a bit complicated and is not exposed currently to the user. One has to look at the platform descriptions (DT bindings or ACPI bindings) to make an understanding. Given the new naming scheme, it will be helpful to have this information to choose the appropriate devices for tracing. This patch exposes the device connections via links in the sysfs directories. e.g, for a connection devA[OutputPort_X] -> devB[InputPort_Y] is represented as two symlinks: /sys/bus/coresight/.../devA/out:X -> /sys/bus/coresight/.../devB /sys/bus/coresight/.../devB/in:Y -> /sys/bus/coresight/.../devA Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> [Revised to use the generic sysfs links functions & link structures. Provides a connections sysfs group in each device to hold the links.] Co-developed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-5-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Add generic sysfs link creation functionsMike Leach3-1/+130
To allow the connections between coresight components to be represented in sysfs, generic methods for creating sysfs links between two coresight devices are added. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-4-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Add return value for fixup connectionsSuzuki K Poulose1-10/+14
Handle failures in fixing up connections for a newly registered device. This will be useful to handle cases where we fail to expose the links via sysfs for the connections. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Pass coresight_device for coresight_release_platform_dataSuzuki K Poulose3-5/+7
As we prepare to expose the links between the devices in sysfs, pass the coresight_device instance to the coresight_release_platform_data in order to free up the connections when the device is removed. No functional changes as such in this patch. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15coresight: cti: remove incorrect NULL return checkCalvin Johnson1-2/+2
fwnode_find_reference() doesn't return NULL and hence that check should be avoided. Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200507053547.13707-1-calvin.johnson@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21docs: fix broken references to text filesMauro Carvalho Chehab1-1/+1
Several references got broken due to txt to ReST conversion. Several of them can be automatically fixed with: scripts/documentation-file-ref-check --fix Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # hwtracing/coresight/Kconfig Reviewed-by: Paul E. McKenney <paulmck@kernel.org> # memory-barrier.txt Acked-by: Alex Shi <alex.shi@linux.alibaba.com> # translations/zh_CN Acked-by: Federico Vaga <federico.vaga@vaga.pv.it> # translations/it_IT Acked-by: Marc Zyngier <maz@kernel.org> # kvm/arm64 Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6f919ddb83a33b5f2a63b6b5f0575737bb2b36aa.1586881715.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-03-24intel_th: msu: Make stopping the trace optionalAlexander Shishkin1-1/+37
Some use cases prefer to keep collecting the trace data into the last available window while the other windows are being offloaded instead of stopping the trace. In this scenario, the window switch happens automatically when the next window becomes available again. Add an option to allow this and a sysfs attribute to enable it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200319085152.52183-1-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-23Merge 5.6-rc7 into char-misc-nextGreg Kroah-Hartman3-9/+15
We need the char/misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Add connection information to sysfsMike Leach3-3/+346
Dynamically adds sysfs attributes for all connections defined in the CTI. Each connection has a triggers<N> sub-directory with name, in_signals, in_types, out_signals and out_types as read-only parameters in the directory. in_ or out_ parameters may be omitted if there are no in or out signals for the connection. Additionally each device has a nr_cons in the connections sub-directory. This allows clients to explore the connection and trigger signal details without needing to refer to device tree or specification of the device. Standardised type information is provided for certain common functions - e.g. snk_full for a trigger from a sink indicating full. Otherwise type defaults to genio. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-10-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>