summaryrefslogtreecommitdiff
path: root/drivers/ieee1394
AgeCommit message (Collapse)AuthorFilesLines
2008-08-19ieee1394: sbp2: let nodemgr retry node updates during bus reset seriesStefan Richter1-7/+18
sbp2 was too quick to report .update() to the ieee1394 core as failed. (Logged as "Failed to reconnect to sbp2 device!".) The core would then unbind sbp2 from the device. This is not justified if the .update() failed because another bus reset happened. We check this and tell the ieee1394 that .update() succeeded, and the core will call sbp2's .update() for the new bus reset as well. This improves reconnection/re-login especially on buses with several disks as they may issue bus resets in close succession when they come online. Tested by Damien Benoist. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-19ieee1394: don't drop nodes during bus reset seriesStefan Richter1-19/+21
nodemgr_node_probe checked for generation increments too late and therefore prematurely reported nodes as "suspended". Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11349. Reported and tested by Damien Benoist. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-19ieee1394: regression in 2.6.25: updates should happen before probesStefan Richter2-15/+16
Regression since commit 73cf60232ef16e1f8a64defa97214a1722db1e6c, "ieee1394: use class iteration api": The two loops for (1.) driver updates and (2.) driver probes were replaced by a single loop with bogus needs_probe checks. Hence updates and probes were now intermixed, and especially sbp2 updates (reconnects) held up longer than necessary. While we fix it, change the needs_probe flag to bool type for clarity. Tested by Damien Benoist. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-24PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architecturesAndrea Righi1-0/+1
On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit boundary. For example: u64 val = PAGE_ALIGN(size); always returns a value < 4GB even if size is greater than 4GB. The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for example): #define PAGE_SHIFT 12 #define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) ... #define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) The "~" is performed on a 32-bit value, so everything in "and" with PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary. Using the ALIGN() macro seems to be the right way, because it uses typeof(addr) for the mask. Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in include/linux/mm.h. See also lkml discussion: http://lkml.org/lkml/2008/6/11/237 [akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c] [akpm@linux-foundation.org: fix v850] [akpm@linux-foundation.org: fix powerpc] [akpm@linux-foundation.org: fix arm] [akpm@linux-foundation.org: fix mips] [akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c] [akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c] [akpm@linux-foundation.org: fix powerpc] Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22Driver Core: add ability for class_find_device to start in middle of listGreg Kroah-Hartman1-3/+6
This mirrors the functionality that driver_find_device has as well. We add a start variable, and all callers of the function are fixed up at the same time. The block layer will be using this new functionality in a follow-on patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-22Driver Core: add ability for class_for_each_device to start in middle of listGreg Kroah-Hartman1-5/+9
This mirrors the functionality that driver_for_each_device has as well. We add a start variable, and all callers of the function are fixed up at the same time. The block layer will be using this new functionality in a follow-on patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-22device create: ieee1394: convert device_create to device_create_drvdataGreg Kroah-Hartman3-8/+9
device_create() is race-prone, so use the race-free device_create_drvdata() instead as device_create() is going away. Cc: Ben Collins <ben.collins@ubuntu.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-15Merge branch 'sbp2-spindown' of ↵Linus Torvalds2-2/+21
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'sbp2-spindown' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: sbp2: spin disks down on suspend and shutdown firewire: fw-sbp2: spin disks down on suspend and shutdown ieee1394: sbp2: fix spindown for PL-3507 and TSB42AA9 firmwares firewire: fw-sbp2: fix spindown for PL-3507 and TSB42AA9 firmwares scsi: sd: optionally set power condition in START STOP UNIT
2008-07-14ieee1394: dump mmapped iso buffers in core filesPhilippe De Muyter1-1/+1
Currently, core files do not contain the mmapped memory of the video1394 or dv1394 devices, which contain the actual video input, making it impossible to analyse the cause of abnormal program termination for image analysis or (de)compression software. Fix that. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Also affects users of the rawiso ioctl API of raw1394. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-14ieee1394: raw1394: Push the BKL down into the driver ioctlsAlan Cox1-5/+15
Actually in this case wrap the function for now. Signed-off-by: Alan Cox <alan@redhat.com> Added raw1394_compat_ioctl hunk. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-14ieee1394: video1394: reorder module init, prepare BKL removalStefan Richter3-4/+15
This prepares video1394 for removal of the BKL (big kernel lock): It allows video1394_open() to be called while video1394_init_module() is still in progress. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-14ieee1394: reduce log noise about config ROM CRC errorsStefan Richter1-10/+22
This avoids redundant messages about a special and usually harmless firmware flaw. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-14ieee1394: sbp2: spin disks down on suspend and shutdownStefan Richter1-0/+2
This instructs sd_mod to send START STOP UNIT on suspend and resume, and on driver unbinding or unloading (including when the system is shut down). We don't do this though if multiple initiators may log in to the target. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-14ieee1394: sbp2: fix spindown for PL-3507 and TSB42AA9 firmwaresStefan Richter2-2/+19
Reported by Tino Keitel: PL-3507 with firmware from Prolific does not spin down the disk on START STOP UNIT with power condition = 0 and start = 0. It does however work with power condition = 2 or 3. Also found while investigating this: DViCO Momobay CX-1 and FX-3A (TI TSB42AA9/A based) become unresponsive after START STOP UNIT with power condition = 0 and start = 0. They stay responsive if power condition is set when stopping the motor. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-06-19ieee1394: Kconfig menu touch-upStefan Richter1-52/+66
Rename and reorder some prompts and modify some help texts. The result: -------------------- IEEE 1394 (FireWire) support -------------------- *** Enable only one of the two stacks, unless you know what you are doing *** New FireWire stack, EXPERIMENTAL OHCI-1394 controllers Storage devices (SBP-2 protocol) Stable FireWire stack OHCI-1394 controllers PCILynx controller Storage devices (SBP-2 protocol) Enable replacement for physical DMA in SBP2 IP over 1394 raw1394 userspace interface video1394 userspace interface dv1394 userspace interface (deprecated) Excessive debugging output The old prompts for reference: -------------------- IEEE 1394 (FireWire) support -------------------- IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL Support for OHCI FireWire host controllers Support for storage devices (SBP-2 protocol driver) IEEE 1394 (FireWire) support *** Subsystem Options *** Excessive debugging output *** Controllers *** Texas Instruments PCILynx support OHCI-1394 support *** Protocols *** OHCI-1394 Video support SBP-2 support (Harddisks etc.) Enable replacement for physical DMA in SBP2 IP over 1394 OHCI-DV I/O support (deprecated) Raw IEEE1394 I/O support Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-05-20ieee1394: sbp2: use correct size of command descriptor blockStefan Richter1-12/+8
Boaz Harrosh wrote: > cmd->cmd_len is now guarantied to be set properly at all cases. > And some commands you want to support will not be set correctly > by COMMAND_SIZE(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-05-01Merge branch 'for-linus' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: fw-sbp2: log scsi_target ID at release ieee1394: fix NULL pointer dereference in sysfs access
2008-05-01ieee1394: fix NULL pointer dereference in sysfs accessStefan Richter1-1/+4
Regression since "ieee1394: prevent device binding of raw1394, video1394, dv1394", commit d2ace29fa44589da51fedc06a67b3f05301f3bfd: $ cat /sys/bus/ieee1394/drivers/raw1394/device_ids triggers a NULL pointer dereference in fw_show_drv_device_ids. Reported by Miles Lane. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Miles Lane <miles.lane@gmail.com>
2008-04-25Merge branch 'for-linus' of ↵Linus Torvalds5-1/+48
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: silence defined but not used warning in non-modular builds ieee1394: rawiso: requeue packet for transmission after skipped cycle
2008-04-25ieee1394: silence defined but not used warning in non-modular buildsTony Breeds3-0/+6
Currently the kernel will issue the following warning: drivers/ieee1394/raw1394.c:2938: warning: 'raw1394_id_table' defined but not used Add #ifdef MODULE guards around the declaration. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Ditto with dv1394_id_table and video1394_id_table. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-25ieee1394: rawiso: requeue packet for transmission after skipped cyclePieter Palmers3-1/+42
As it seems, some host controllers have issues that can cause them to skip cycles now and then when using large packets. I suspect that this is due to DMA not succeeding in time. If the transmit fifo can't contain more than one packet (big packets), the DMA should provide a new packet each cycle (125us). I am under the impression that my current PCI express test system can't guarantee this. In any case, the patch tries to provide a workaround as follows: The DMA program descriptors are modified such that when an error occurs, the DMA engine retries the descriptor the next cycle instead of stalling. This way no data is lost. The side effect of this is that packets are sent with one cycle delay. This however might not be that much of a problem for certain protocols (e.g. AM824). If they use padding packets for e.g. rate matching they can drop one of those to resync the streams. The amount of skips between two userspace wakeups is counted. This number is then propagated to userspace through the upper 16 bits of the 'dropped' parameter. This allows unmodified userspace applications due to the following: 1) libraw simply passes this dropped parameter to the user application 2) the meaning of the dropped parameter is: if it's nonzero, something bad has happened. The actual value of the parameter at this moment does not have a specific meaning. A libraw client can then retrieve the number of skipped cycles and account for them if needed. Signed-off-by: Pieter Palmers <pieterp@joow.be> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-19Convert asm/semaphore.h users to linux/semaphore.hMatthew Wilcox1-1/+1
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18ieee1394: limit early node speed to host interface speedPhilippe De Muyter1-0/+2
The following patch limits the node speed to the host interface speed, before using it. Signed-off-by: Philippe De Muyter <phdm@macqel.be> It should actually suffice to do this only for the local node's speedcap[]. But there is another bug in the speed calculation: The local node's speed is not correctly propagated to the speeds which are to be used to access remote nodes. http://thread.gmane.org/gmane.linux.kernel.firewire.devel/11772/focus=12024 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18ieee1394: Remove superfluous calls to kobject_set_name().Robert P. J. Day3-3/+0
Unless you're adding a kobject to the sysfs hierarchy, there is no point setting its kobject name. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18ieee1394: ohci1394: missing PPC PMac feature calls in failure pathStefan Richter1-3/+3
The failure path of ohci1394_pci_probe() reuses ohci1394_pci_remove(). Doing so it missed to call ohci1394_pmac_off() in a few unlikely early error cases. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18ieee1394: ohci1394: refactor some printk format stringsStefan Richter1-15/+15
to reduce the size of ohci1394.ko. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18ieee1394: ohci1394: unroll a macro with returnStefan Richter1-38/+54
We don't want to hide something like return in a preprocessor macro. Unroll the macro and use a goto, which also reduces the size of ohci1394.ko. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18ieee1394: Use shorter list_splice_init() for brevity.Robert P. J. Day2-6/+3
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18ieee1394: replace remaining __FUNCTION__ occurrencesHarvey Harrison5-13/+13
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18ieee1394: ohci1394: refactor probe, remove, suspend, resumeStefan Richter1-64/+49
Clean up shared code and variable names. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18ieee1394: ohci1394: switch on bus power after resume on PPC PMacStefan Richter1-2/+6
The platform feature calls in the suspend method switched off cable power, but the calls in the resume method did not switch it back on. Add the necessary feature call to .resume. Also add the corresponding call to .suspend to make .suspend's behavior explicitly the same on all PMacs. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18ieee1394: prevent device binding of raw1394, video1394, dv1394Stefan Richter4-6/+7
These drivers don't need to match any unit_directory type device. They just need the id_table for module autoloading per module alias. Not binding any of these drivers allows special-purpose drivers with similar or same IDs to bind to devices. This currently only benefits out-of-tree drivers; on the other hand it is in no way detrimental to in-tree drivers. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18ieee1394: be*_add_cpu conversionMarcin Slusarz1-4/+2
replace all: big_endian_variable = cpu_to_beX(beX_to_cpu(big_endian_variable) + expression_in_cpu_byteorder); with: beX_add_cpu(&big_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18ieee1394: sbp2: relax SCSI DMA alignmentStefan Richter1-5/+2
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-14ieee1394: sbp2: fix for SYM13FW500 bridge (Datafab disk)Stefan Richter1-0/+5
Fix I/O errors due to SYM13FW500's inability to handle larger request sizes. Reported by Piergiorgio Sartor <piergiorgio.sartor@nexgo.de> for firewire-sbp2 in https://bugzilla.redhat.com/show_bug.cgi?id=436879 This fix is necessary because sbp2's default request size limit has been lifted since 2.6.25-rc1. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-02-19ieee1394: sbp2: fix rescan-scsi-busStefan Richter1-0/+3
rescan-scsi-bus used to add SBP-2 targets which weren't there. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-02-16ieee1394: sbp2: add INQUIRY delay workaroundStefan Richter2-0/+14
Add the same workaround as found in fw-sbp2 for feature parity and compatibility of the workarounds module parameter. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-02-02ieee1394: sbp2: fix bogus s/g access changeStefan Richter1-3/+2
sg_dma_len(sg) is invalid before the s/g list is DMA-mapped. This fixes a post 2.6.24 regression which prevents access to SBP-2 devices on several architectures, introduced by "ieee1394: sbp2: s/g list access cosmetics", commit 825f1df545ab0289185373b0eaf06fb0b3487422. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-31ieee1394: ohci1394: don't schedule IT tasklets on IR eventsStefan Richter1-4/+8
Bug noted by Pieter Palmers: Isochronous transmit tasklets were scheduled on isochronous receive events, in addition to the proper isochronous receive tasklets. http://marc.info/?l=linux1394-devel&m=119783196222802 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-31ieee1394: sbp2: raise default transfer size limitStefan Richter2-12/+15
This patch speeds up sbp2 a little bit --- but more importantly, it brings the behavior of sbp2 and fw-sbp2 closer to each other. Like fw-sbp2, sbp2 now does not limit the size of single transfers to 255 sectors anymore, unless told so by a blacklist flag or by module load parameters. Only very old bridge chips have been known to need the 255 sectors limit, and we have got one such chip in our hardwired blacklist. There certainly is a danger that more bridges need that limit; but I prefer to have this issue present in both fw-sbp2 and sbp2 rather than just one of them. An OXUF922 with 400GB 7200RPM disk on an S400 controller is sped up by this patch from 22.9 to 23.5 MB/s according to hdparm. The same effect could be achieved before by setting a higher max_sectors module parameter. On buses which use 1394b beta mode, sbp2 and fw-sbp2 will now achieve virtually the same bandwidth. Fw-sbp2 only remains faster on 1394a buses due to fw-core's gap count optimization. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-31ieee1394: remove unused codeStefan Richter1-68/+0
The code has been in "#if 0 - #endif" since Linux 2.6.12. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-31ieee1394: small cleanup after "nopage"Stefan Richter1-12/+4
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-31ieee1394: nopageNick Piggin1-23/+18
Convert ieee1394 from nopage to fault. Remove redundant vma range checks (correct resource range check is retained). Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-31ieee1394: Add missing "space"Joe Perches1-2/+2
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-31ieee1394: sbp2: s/g list access cosmeticsStefan Richter1-14/+12
Replace sg->length by sg_dma_len(sg). Rename a variable for shorter line lengths and eliminate some superfluous local variables. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-31ieee1394: sbp2: prepare for s/g chainingStefan Richter1-1/+1
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30x86: early boot debugging via FireWire (ohci1394_dma=early)Bernhard Kaindl2-0/+286
This patch adds a new configuration option, which adds support for a new early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch() to decide wether OHCI-1394 FireWire controllers should be initialized and enabled for physical DMA access to allow remote debugging of early problems like issues ACPI or other subsystems which are executed very early. If the config option is not enabled, no code is changed, and if the boot paramenter is not given, no new code is executed, and independent of that, all new code is freed after boot, so the config option can be even enabled in standard, non-debug kernels. With specialized tools, it is then possible to get debugging information from machines which have no serial ports (notebooks) such as the printk buffer contents, or any data which can be referenced from global pointers, if it is stored below the 4GB limit and even memory dumps of of the physical RAM region below the 4GB limit can be taken without any cooperation from the CPU of the host, so the machine can be crashed early, it does not matter. In the extreme, even kernel debuggers can be accessed in this way. I wrote a small kgdb module and an accompanying gdb stub for FireWire which allows to gdb to talk to kgdb using remote remory reads and writes over FireWire. An version of the gdb stub fore FireWire is able to read all global data from a system which is running a a normal kernel without any kernel debugger, without any interruption or support of the system's CPU. That way, e.g. the task struct and so on can be read and even manipulated when the physical DMA access is granted. A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt and I've put a copy online at ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt It also has links to all the tools which are available to make use of it another copy of it is online at: ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff Signed-Off-By: Bernhard Kaindl <bk@suse.de> Tested-By: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-0/+6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits) [SCSI] usbstorage: use last_sector_bug flag universally [SCSI] libsas: abstract STP task status into a function [SCSI] ultrastor: clean up inline asm warnings [SCSI] aic7xxx: fix firmware build [SCSI] aacraid: fib context lock for management ioctls [SCSI] ch: remove forward declarations [SCSI] ch: fix device minor number management bug [SCSI] ch: handle class_device_create failure properly [SCSI] NCR5380: fix section mismatch [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices [SCSI] IB/iSER: add logical unit reset support [SCSI] don't use __GFP_DMA for sense buffers if not required [SCSI] use dynamically allocated sense buffer [SCSI] scsi.h: add macro for enclosure bit of inquiry data [SCSI] sd: add fix for devices with last sector access problems [SCSI] fix pcmcia compile problem [SCSI] aacraid: add Voodoo Lite class of cards. [SCSI] aacraid: add new driver features flags [SCSI] qla2xxx: Update version number to 8.02.00-k7. [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command. ...
2008-01-25ieee1394: use class iteration apiDave Young1-138/+176
Convert to use the class iteration api. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-12[SCSI] relax scsi dma alignmentJames Bottomley1-0/+6
This patch relaxes the default SCSI DMA alignment from 512 bytes to 4 bytes. I remember from previous discussions that usb and firewire have sector size alignment requirements, so I upped their alignments in the respective slave allocs. The reason for doing this is so that we don't get such a huge amount of copy overhead in bio_copy_user() for udev. (basically all inquiries it issues can now be directly mapped). Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>