summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)AuthorFilesLines
2024-01-18Merge tag 'tty-6.8-rc1' of ↵Linus Torvalds4-18/+18
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits) serial: sc16is7xx: refactor EFR lock serial: sc16is7xx: reorder code to remove prototype declarations serial: sc16is7xx: refactor FIFO access functions to increase commonality serial: sc16is7xx: drop unneeded MODULE_ALIAS serial: sc16is7xx: replace hardcoded divisor value with BIT() macro serial: sc16is7xx: add explicit return for some switch default cases serial: sc16is7xx: add macro for max number of UART ports serial: sc16is7xx: add driver name to struct uart_driver serial: sc16is7xx: use i2c_get_match_data() serial: sc16is7xx: use spi_get_device_match_data() serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() serial: sc16is7xx: set safe default SPI clock frequency serial: sc16is7xx: add check for unsupported SPI modes during probe serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error serial: 8250_exar: Set missing rs485_supported flag serial: omap: do not override settings for RS485 support serial: core, imx: do not set RS485 enabled if it is not supported serial: core: make sure RS485 cannot be enabled when it is not supported ...
2024-01-18Merge tag 'char-misc-6.8-rc1' of ↵Linus Torvalds66-542/+8274
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ...
2023-12-26iio: adc: Add support for AD7091R-8Marcelo Schmitt5-0/+297
Add support for Analog Devices AD7091R-2, AD7091R-4, and AD7091R-8 low power 12-Bit SAR ADCs with SPI interface. Extend ad7091r-base driver so it can be used by the AD7091R-8 driver. Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/09d1d1c4b39cecc528488efac6094233715f5659.1703013352.git.marcelo.schmitt1@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-26iio: adc: Split AD7091R-5 config symbolMarcelo Schmitt2-1/+6
Split AD7091R-5 kconfig symbol into one symbol for the base AD7091R driver and another one for the I2C interface AD7091R-5 driver. Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/8cae37c611c1b0fe3faef7a4b8c4cc915eaeddc7.1703013352.git.marcelo.schmitt1@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-26iio: adc: ad7091r: Add chip_info callback to get conversion result channelMarcelo Schmitt3-5/+14
AD7091R-5 and AD7091R-2/-4/-8 have slightly different register field layout and due to that require different masks for getting the index of the channel associated with each read. Add a callback function so the base driver can get correct channel ID for each chip variant. Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/1f7a40b4839b3a1c3f1a0654a1b329bea870feb6.1703013352.git.marcelo.schmitt1@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-26iio: adc: ad7091r: Set device mode through chip_info callbackMarcelo Schmitt3-37/+39
AD7091R-5 devices have a few modes of operation (sample, command, autocycle) which are set by writing to configuration register fields. Follow up patches will add support for AD7091R-2/-4/-8 which don't have those operation modes nor the register fields for setting them. Make ad7091r_set_mode() a callback function of AD7091R chip_info struct so the base driver can appropriately handle each design without having to check which actual chip is connected. Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/5140336980f66c2c45f05895c3b68e2f65fba1c2.1703013352.git.marcelo.schmitt1@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-26iio: adc: ad7091r: Remove unneeded probe parametersMarcelo Schmitt3-9/+7
With the grouping of ad7091r initialization data and callbacks into the init_info struct, there is no more need to pass the device name and register map through probe function parameters as those will be available in the init_info object. Remove probe parameters that are not needed anymore. Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/090a6b461410a374511a8c73659de28b2665f96b.1703013352.git.marcelo.schmitt1@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-26iio: adc: ad7091r: Move chip init data to container structMarcelo Schmitt3-30/+55
AD7091R designs may differ on their communication protocol and resources required for proper setup. Extract what is design specific into a init_info struct so the base driver can use data and callback functions from that struct rather than checking which specific chip is connected during device initialization. Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/1aca2261e227474dc58ce26442845947bcde9b14.1703013352.git.marcelo.schmitt1@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-26iio: adc: ad7091r: Move generic AD7091R code to base driver and header fileMarcelo Schmitt3-37/+42
Some code generic to AD7091R devices such as channel definitions were in the AD7091R-5 driver. There was also some generic register definitions declared in the base driver which would make more sense to be in the header file. The device state struct will be needed for the ad7091r8 driver in a follow up patch so that ought to be moved to the header file as well. Lastly, a couple of regmap callback functions are also capable of abstracting characteristics of different AD7091R devices and those are now being exported to IIO_AD7091R name space. Move AD7091R generic code either to the base driver or to the header file so both the ad7091r5 and the ad7091r8 driver can use those declaration in follow up patches. Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/6376fc523ee503d47ec499e2cd2ef13bfb5fd8ba.1703013352.git.marcelo.schmitt1@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-26iio: adc: ad7091r: Enable internal vref if external vref is not suppliedMarcelo Schmitt2-0/+9
The ADC needs a voltage reference to work correctly. Users can provide an external voltage reference or use the chip internal reference to operate the ADC. The availability of an in chip reference for the ADC saves the user from having to supply an external voltage reference, which makes the external reference an optional property as described in the device tree documentation. Though, to use the internal reference, it must be enabled by writing to the configuration register. Enable AD7091R internal voltage reference if no external vref is supplied. Fixes: 260442cc5be4 ("iio: adc: ad7091r5: Add scale and external VREF support") Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/b865033fa6a4fc4bf2b4a98ec51a6144e0f64f77.1703013352.git.marcelo.schmitt1@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-26iio: adc: ad7091r: Allow users to configure device eventsMarcelo Schmitt3-24/+166
AD7091R-5 devices are supported by the ad7091r-5 driver together with the ad7091r-base driver. Those drivers declared iio events for notifying user space when ADC readings fall bellow the thresholds of low limit registers or above the values set in high limit registers. However, to configure iio events and their thresholds, a set of callback functions must be implemented and those were not present until now. The consequence of trying to configure ad7091r-5 events without the proper callback functions was a null pointer dereference in the kernel because the pointers to the callback functions were not set. Implement event configuration callbacks allowing users to read/write event thresholds and enable/disable event generation. Since the event spec structs are generic to AD7091R devices, also move those from the ad7091r-5 driver the base driver so they can be reused when support for ad7091r-2/-4/-8 be added. Fixes: ca69300173b6 ("iio: adc: Add support for AD7091R5 ADC") Suggested-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/59552d3548dabd56adc3107b7b4869afee2b0c3c.1703013352.git.marcelo.schmitt1@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-21iio: dac: driver for MCP4821Anshul Dalal3-0/+247
Adds driver for the MCP48xx series of DACs. Device uses a simplex SPI channel. To set the value of an output channel, a 16-bit data of following format must be written: Bit field | Description 15 [MSB] | Channel selection bit 0 -> Channel A 1 -> Channel B 13 | Output Gain Selection bit 0 -> 2x Gain (Vref = 4.096V) 1 -> 1x Gain (Vref = 2.048V) 12 | Output Shutdown Control bit 0 -> Shutdown the selected channel 1 -> Active mode operation 11-0 [LSB]| DAC Input Data bits Value's big endian representation is taken as input for the selected DAC channel. For devices with a resolution of less than 12-bits, only the x most significant bits are considered where x is the resolution of the device. Reference: Page#22 [MCP48x2 Datasheet] Supported devices: +---------+--------------+-------------+ | Device | Resolution | Channels | |---------|--------------|-------------| | MCP4801 | 8-bit | 1 | | MCP4802 | 8-bit | 2 | | MCP4811 | 10-bit | 1 | | MCP4812 | 10-bit | 2 | | MCP4821 | 12-bit | 1 | | MCP4822 | 12-bit | 2 | +---------+--------------+-------------+ Devices tested: MCP4821 [12-bit single channel] MCP4802 [8-bit dual channel] Tested on Raspberry Pi Zero 2W Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/22244B.pdf #MCP48x1 Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/20002249B.pdf #MCP48x2 Signed-off-by: Anshul Dalal <anshulusr@gmail.com> Link: https://lore.kernel.org/r/20231220151954.154595-2-anshulusr@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-21iio: buffer-dma: split iio_dma_buffer_fileio_free() functionAlexandru Ardelean1-19/+24
This change splits the logic into a separate function, which will be re-used later. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: Alexandru Ardelean <ardeleanalex@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20231219175009.65482-3-paul@crapouillou.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-21iio: buffer-dma: Get rid of outgoing queuePaul Cercueil1-21/+23
The buffer-dma code was using two queues, incoming and outgoing, to manage the state of the blocks in use. While this totally works, it adds some complexity to the code, especially since the code only manages 2 blocks. It is much easier to just check each block's state manually, and keep a counter for the next block to dequeue. Since the new DMABUF based API wouldn't use the outgoing queue anyway, getting rid of it now makes the upcoming changes simpler. With this change, the IIO_BLOCK_STATE_DEQUEUED is now useless, and can be removed. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20231219175009.65482-2-paul@crapouillou.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-21iio: buffer: Use IIO_SEPARATE instead of a hard-coded 0Christophe JAILLET1-3/+3
Use an explicit IIO_SEPARATE instead of 0 for the 'shared_by' parameter when calling __iio_add_chan_devattr(). For some reason, commit 3704432fb1fd ("iio: refactor info mask and ext_info attribute creation.") updated only 1 place out of 4. Update the remaining ones now. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/1d17f57423172fcb9d9797cfe7c8282f356049c2.1702831285.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-19Revert "iio: hid-sensor-als: Add light color temperature support"Srinivas Pandruvada1-35/+2
This reverts commit 5f05285df691b1e82108eead7165feae238c95ef. This commit assumes that every HID descriptor for ALS sensor has presence of usage id ID HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE. When the above usage id is absent, driver probe fails. This breaks ALS sensor functionality on many platforms. Till we have a good solution, revert this commit. Reported-by: Thomas Weißschuh <thomas@t-8ch.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218223 Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: <stable@vger.kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20231217200703.719876-3-srinivas.pandruvada@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-19Revert "iio: hid-sensor-als: Add light chromaticity support"Srinivas Pandruvada1-63/+0
This reverts commit ee3710f39f9d0ae5137a866138d005fe1ad18132. This commit assumes that every HID descriptor for ALS sensor has presence of usage id ID HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X and HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y. When the above usage ids are absent, driver probe fails. This breaks ALS sensor functionality on many platforms. Till we have a good solution, revert this commit. Reported-by: Thomas Weißschuh <thomas@t-8ch.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218223 Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: <stable@vger.kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20231217200703.719876-2-srinivas.pandruvada@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-17iio: adc: ad7091r: Align arguments to function call parenthesisMarcelo Schmitt1-2/+3
Align arguments to function call open parenthesis to comply with the Linux kernel coding style. Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/fc71a82d3b4a6bc6f511f27451dbd7a3280a8c95.1702746240.git.marcelo.schmitt1@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-17iio: adc: ad7091r: Set alert bit in config registerMarcelo Schmitt1-0/+6
The ad7091r-base driver sets up an interrupt handler for firing events when inputs are either above or below a certain threshold. However, for the interrupt signal to come from the device it must be configured to enable the ALERT/BUSY/GPO pin to be used as ALERT, which was not being done until now. Enable interrupt signals on the ALERT/BUSY/GPO pin by setting the proper bit in the configuration register. Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/e8da2ee98d6df88318b14baf3dc9630e20218418.1702746240.git.marcelo.schmitt1@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-17iio: adc: ad7091r: Pass iio_dev to event handlerMarcelo Schmitt1-3/+3
Previous version of ad7091r event handler received the ADC state pointer and retrieved the iio device from driver data field with dev_get_drvdata(). However, no driver data have ever been set, which led to null pointer dereference when running the event handler. Pass the iio device to the event handler and retrieve the ADC state struct from it so we avoid the null pointer dereference and save the driver from filling the driver data field. Fixes: ca69300173b6 ("iio: adc: Add support for AD7091R5 ADC") Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/5024b764107463de9578d5b3b0a3d5678e307b1a.1702746240.git.marcelo.schmitt1@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-17iio: chemical: add support for Aosong AGS02MAAnshul Dalal3-0/+177
A simple driver for the TVOC (Total Volatile Organic Compounds) sensor from Aosong: AGS02MA Steps in reading the VOC sensor value over i2c: 1. Read 5 bytes from the register `AGS02MA_TVOC_READ_REG` [0x00] 2. The first 4 bytes are taken as the big endian sensor data with final byte being the CRC 3. The CRC is verified and the value is returned over an `IIO_CHAN_INFO_RAW` channel as percents Tested on Raspberry Pi Zero 2W Datasheet: https://asairsensors.com/wp-content/uploads/2021/09/AGS02MA.pdf Signed-off-by: Anshul Dalal <anshulusr@gmail.com> Link: https://lore.kernel.org/r/20231215162312.143568-3-anshulusr@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-17iio: accel: bmi088: update comments and KconfigJun Yan3-3/+8
update the comments and Kconfig file with more descriptive and accurate information about newly added device: BMI085, BMI090L. Signed-off-by: Jun Yan <jerrysteve1101@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-11iio: humidity: Add driver for ti HDC302x humidity sensorsLi peiyu1-0/+473
Add support for HDC302x integrated capacitive based relative humidity (RH) and temperature sensor. This driver supports reading values, reading the maximum and minimum of values and controlling the integrated heater of the sensor. Co-developed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by: Li peiyu <579lpy@gmail.com> Link: https://lore.kernel.org/r/20231211122940.9791-1-579lpy@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-11iio: core: introduce trough info element for minimum valuesJavier Carrasco1-0/+1
The IIO_CHAN_INFO_PEAK info element is used for maximum values and currently there is no equivalent for minimum values. Instead of overloading the existing peak info element, a new info element can be added. In principle there is no need to add a _TROUGH_SCALE element as the scale will be the same as the one required for INFO_PEAK, which in turn is sometimes omitted if a single scale for peaks and raw values is required. Add an IIO_CHAN_INFO_TROUGH info element for minimum values. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231211122747.9723-1-579lpy@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-11iio: light: driver for Lite-On ltr390Anshul Dalal3-0/+208
Implements driver for the Ambient/UV Light sensor LTR390. The driver exposes two ways of getting sensor readings: 1. Raw UV Counts directly from the sensor 2. The computed UV Index value with a percision of 2 decimal places [NOTE] Ambient light sensing has not been implemented yet. Driver tested on RPi Zero 2W Datasheet: https://optoelectronics.liteon.com/upload/download/DS86-2015-0004/LTR-390UV_Final_%20DS_V1%201.pdf Signed-off-by: Anshul Dalal <anshulusr@gmail.com> Link: https://lore.kernel.org/r/20231208102211.413019-2-anshulusr@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-11iio: light: isl76682: remove unreachable codeJiapeng Chong1-1/+0
The function isl76682_read_raw cannot execute return -EINVAL up to 145 lines, delete the invalid code. drivers/iio/light/isl76682.c:145 isl76682_read_raw() warn: ignoring unreachable code. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7698 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20231208021715.32450-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-11iio: pressure: driver for Honeywell HSC/SSC seriesPetre Rodan6-0/+723
Adds driver for digital Honeywell TruStability HSC and SSC series pressure and temperature sensors. Communication is one way. The sensor only requires 4 bytes worth of clock pulses on both i2c and spi in order to push the data out. The i2c address is hardcoded and depends on the part number. There is no additional GPIO control. code is now based on iio/togreg Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf [HSC] Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf [SSC] Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231207164634.11998-2-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-11iio: temperature: mlx90635 MLX90635 IR Temperature sensorCrt Mori3-0/+1110
MLX90635 is an Infra Red contactless temperature sensor most suitable for consumer applications where measured object temperature is in range between -20 to 100 degrees Celsius. It has improved accuracy for measurements within temperature range of human body and can operate in ambient temperature range between -20 to 85 degrees Celsius. Driver provides simple power management possibility as it returns to lowest possible power mode (Step sleep mode) in which temperature measurements can still be performed, yet for continuous measuring it switches to Continuous power mode where measurements constantly change without triggering. Signed-off-by: Crt Mori<cmo@melexis.com> Link: https://lore.kernel.org/r/c6590e4fb8d993a5317b486a3e45e1bb6e9e3318.1701872051.git.cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-11iio: adc: adi-axi-adc: convert to regmapNuno Sa2-34/+53
Use MMIO regmap interface. It makes things easier for manipulating bits. Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-8-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-10iio: adc: ad9467: use the more common !val NULL checkNuno Sa1-1/+1
Check !val instead of directing checking for NULL (val == NULL). No functional changes intended. Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-7-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-10iio: adc: ad9467: use chip_info variables instead of arrayNuno Sa1-46/+43
Instead of having an array and keeping IDs for each entry of the array, just have a chip_info struct per device. Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-6-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-10iio: adc: ad9467: use spi_get_device_match_data()Nuno Sa1-3/+1
Make use of spi_get_device_match_data() to simplify things. Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-5-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-10iio: adc: ad9467: fix scale settingNuno Sa2-59/+62
When reading in_voltage_scale we can get something like: root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale 0.038146 However, when reading the available options: root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale_available 2000.000000 2100.000006 2200.000007 2300.000008 2400.000009 2500.000010 which does not make sense. Moreover, when trying to set a new scale we get an error because there's no call to __ad9467_get_scale() to give us values as given when reading in_voltage_scale. Fix it by computing the available scales during probe and properly pass the list when .read_available() is called. While at it, change to use .read_available() from iio_info. Also note that to properly fix this, adi-axi-adc.c has to be changed accordingly. Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-10iio: adc: ad9467: add mutex to struct ad9467_stateNuno Sa1-1/+6
When calling ad9467_set_scale(), multiple calls to ad9467_spi_write() are done which means we need to properly protect the whole operation so we are sure we will be in a sane state if two concurrent calls occur. Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-3-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-10iio: adc: ad9467: don't ignore error codesNuno Sa1-10/+17
Make sure functions that return errors are not ignored. Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-2-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-10iio: adc: ad9467: fix reset gpio handlingNuno Sa1-13/+18
The reset gpio was being handled with inverted polarity. This means that as far as gpiolib is concerned we were actually leaving the pin asserted (in theory, this would mean reset). However, inverting the polarity in devicetree made things work. Fix it by doing it the proper way and how gpiolib expects it to be done. While at it, moved the handling to it's own function and dropped 'reset_gpio' from the 'struct ad9467_state' as we only need it during probe. On top of that, refactored things so that we now request the gpio asserted (i.e in reset) and then de-assert it. Also note that we now use gpiod_set_value_cansleep() instead of gpiod_direction_output() as we already request the pin as output. Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-1-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-10iio: adc: mcp3911: simplify code with guard macroMarcus Folkesson1-41/+23
Use the guard(mutex) macro for handle mutex lock/unlocks. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Link: https://lore.kernel.org/r/20231206-mcp3911-guard-v4-1-30c3c5d4340f@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-08tty: serdev: convert to u8 and size_tJiri Slaby (SUSE)4-18/+18
Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. This patch converts struct serdev_device_ops hooks and its instantiations. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Rob Herring <robh@kernel.org> Acked-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20231206073712.17776-24-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-06iio: light: pa1203001: Drop ACPI_PTR() protection.Jonathan Cameron1-1/+1
The extra cost of always including the acpi_device_id table is trivial vs the complexity of adding guards or __maybe_unused markings so just stop using the ACPI_PTR() macro. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311160851.FDA4CDVE-lkp@intel.com/ Link: https://lore.kernel.org/r/20231116192711.366441-1-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-06iio: light: isl76682: Add ISL76682 driverMarek Vasut3-0/+362
The ISL76682 is very basic ALS which only supports ALS or IR mode in four ranges, 1k/4k/16k/64k LUX. There is no IRQ support or any other fancy functionality. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20231127212726.77707-2-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: light: add VEML6075 UVA and UVB light sensor driverJavier Carrasco3-0/+486
The Vishay VEMl6075 is a low power, 16-bit resolution UVA and UVB light sensor with I2C interface and noise compensation (visible and infrarred). Every UV channel generates an output signal measured in counts per integration period, where the integration time is configurable. This driver adds support for both UV channels and the ultraviolet index (UVI) inferred from them according to the device application note with open-air (no teflon) coefficients. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231110-veml6075-v3-3-6ee46775b422@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: add modifiers for A and B ultraviolet lightJavier Carrasco1-0/+2
Currently there are only two modifiers for ultraviolet light: a generic one for any ultraviolet light (IIO_MOD_LIGHT_UV) and one for deep ultraviolet (IIO_MOD_LIGHT_DUV), which is also referred as ultraviolet C (UV-C) band and covers short-wave ultraviolet. There are still no modifiers for the long-wave and medium-wave ultraviolet bands. These two bands are the main components used to obtain the UV index on the Earth's surface. Add modifiers for the ultraviolet A (UV-A) and ultraviolet B (UV-B) bands. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231110-veml6075-v3-1-6ee46775b422@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: adc: MCP3564: fix hardware identification logicMarius Cristea1-2/+2
In mcp3564_config() fix the hardware identification logic based on the hardware ID registers. Second part of the code was disabled by an logic error. Fix a typo related to the "MODULE_DESCRIPTION". Fixes: 33ec3e5fc1ea (iio: adc: adding support for MCP3564 ADC) Signed-off-by: Marius Cristea <marius.cristea@microchip.com> Link: https://lore.kernel.org/r/20231129135619.63475-1-marius.cristea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: adc: MCP3564: fix calib_bias and calib_scale range checksJavier Carrasco1-2/+2
The current implementation uses the AND (&&) operator to check if the value to write for IIO_CHAN_INFO_CALIBBIAS and IIO_CHAN_INFO_CALIBSCALE is within the valid ranges. The evaluated values are the lower and upper limits of the ranges, so this operation always evaluates to false. The OR (||) operator must be used instead. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Marius Cristea <marius.cristea@microchip.com> Link: https://lore.kernel.org/r/20231201-mcp3564_range_checks-v1-1-68f4436e22b0@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: proximity: irsd200: Drop unused includeLinus Walleij1-1/+0
The driver includes the legacy GPIO header <linux/gpio.h> but doesn't use any symbols from it. Drop it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://lore.kernel.org/r/20231128-descriptors-iio-v1-1-da1e94755db6@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: dac: ad5791: Add support for controlling RBUF via devicetreeMichael Hennerich1-1/+8
This patch adds support for an external amplifier to be connected in a gain of two configuration. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231129-ad5791-michael-stuff-v3-2-48e192b00909@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: adc: meson: add separate config for axg SoC familyGeorge Stark1-1/+15
According to Amlogic custom kernels ADC of axg SoC family has vref_select and requires this setting to work nominally and thus needs a separate config. Fixes: 90c6241860bf ("iio: adc: meson: init voltage control bits") Signed-off-by: George Stark <gnstark@salutedevices.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231127235558.71995-1-gnstark@salutedevices.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: adc: imx93: add four channels for imx93 adcHaibo Chen1-0/+4
According to the spec, this ADC totally support 8 channels. i.MX93 contain this ADC with 4 channels connected to pins in the package. i.MX95 contain this ADC with 8 channels connected to pins in the package. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Fixes: 7d02296ac8b8 ("iio: adc: add imx93 adc support") Link: https://lore.kernel.org/r/20231116071026.611269-1-haibo.chen@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()Wadim Egorov1-1/+3
Fix wrong handling of a DMA request where the probing only failed if -EPROPE_DEFER was returned. Instead, let us fail if a non -ENODEV value is returned. This makes DMAs explicitly optional. Even if the DMA request is unsuccessfully, the ADC can still work properly. We do also handle the defer probe case by making use of dev_err_probe(). Fixes: f438b9da75eb ("drivers: iio: ti_am335x_adc: add dma support") Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Bhavya Kapoor <b-kapoor@ti.com> Link: https://lore.kernel.org/r/20230925134427.214556-1-w.egorov@phytec.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-26iio: imu: bmi323: Make the local structures staticJagath Jog J2-2/+2
Make the local structures static within their respective driver files. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311070530.qKhLTz1Y-lkp@intel.com/ Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Link: https://lore.kernel.org/r/20231108035831.5889-1-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-04 18:32:59 +0300