summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)AuthorFilesLines
2024-06-21iio: accel: mxc4005: Reset chip on probe() and resume()Hans de Goede1-0/+68
[ Upstream commit 6b8cffdc4a31e4a72f75ecd1bc13fbf0dafee390 ] On some designs the chip is not properly reset when powered up at boot or after a suspend/resume cycle. Use the sw-reset feature to ensure that the chip is in a clean state after probe() / resume() and in the case of resume() restore the settings (scale, trigger-enabled). Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218578 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240326113700.56725-3-hdegoede@redhat.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21iio: accel: mxc4005: allow module autoloading via OF compatibleLuca Ceresoli1-0/+8
[ Upstream commit 4d7c16d08d248952c116f2eb9b7b5abc43a19688 ] Add OF device table with compatible strings to allow automatic module loading. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231004-mxc4005-device-tree-support-v1-2-e7c0faea72e4@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Stable-dep-of: 6b8cffdc4a31 ("iio: accel: mxc4005: Reset chip on probe() and resume()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12iio: pressure: dps310: support negative temperature valuesThomas Haemmerle1-5/+6
[ Upstream commit 9dd6b32e76ff714308964cd9ec91466a343dcb8b ] The current implementation interprets negative values returned from `dps310_calculate_temp` as error codes. This has a side effect that when negative temperature values are calculated, they are interpreted as error. Fix this by using the return value only for error handling and passing a pointer for the value. Fixes: ba6ec48e76bc ("iio: Add driver for Infineon DPS310") Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com> Link: https://lore.kernel.org/r/20240415105030.1161770-2-thomas.haemmerle@leica-geosystems.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12iio: adc: stm32: Fixing err code to not indicate successJonathan Cameron1-0/+1
[ Upstream commit 3735ca0b072656c3aa2cedc617a5e639b583a472 ] This path would result in returning 0 / success on an error path. Cc: Olivier Moysan <olivier.moysan@foss.st.com> Fixes: 95bc818404b2 ("iio: adc: stm32-adc: add support of generic channels binding") Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20240330185305.1319844-4-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12iio: core: Leave private pointer NULL when no private data suppliedAndy Shevchenko1-2/+4
[ Upstream commit f0245ab389330cbc1d187e358a5b890d9f5383db ] In iio_device_alloc() when size of the private data is 0, the private pointer is calculated to point behind the valid data. Leave it NULL when no private data supplied. Fixes: 6d4ebd565d15 ("iio: core: wrap IIO device into an iio_dev_opaque object") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20240304140650.977784-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17iio: accel: mxc4005: Interrupt handling fixesHans de Goede1-7/+17
commit 57a1592784d622ecee0b71940c65429173996b33 upstream. There are 2 issues with interrupt handling in the mxc4005 driver: 1. mxc4005_set_trigger_state() writes MXC4005_REG_INT_MASK1_BIT_DRDYE (0x01) to INT_MASK1 to enable the interrupt, but to disable the interrupt it writes ~MXC4005_REG_INT_MASK1_BIT_DRDYE which is 0xfe, so it enables all other interrupt sources in the INT_SRC1 register. On the MXC4005 this is not an issue because only bit 0 of the register is used. On the MXC6655 OTOH this is a problem since bit7 is used as TC (Temperature Compensation) disable bit and writing 1 to this disables Temperature Compensation which should only be done when running self-tests on the chip. Write 0 instead of ~MXC4005_REG_INT_MASK1_BIT_DRDYE to disable the interrupts to fix this. 2. The datasheets for the MXC4005 / MXC6655 do not state what the reset value for the INT_MASK0 and INT_MASK1 registers is and since these are write only we also cannot learn this from the hw. Presumably the reset value for both is all 0, which means all interrupts disabled. Explicitly set both registers to 0 from mxc4005_chip_init() to ensure both masks are actually set to 0. Fixes: 79846e33aac1 ("iio: accel: mxc4005: add support for mxc6655") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240326113700.56725-2-hdegoede@redhat.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-17iio:imu: adis16475: Fix sync mode settingRamona Gradinariu1-1/+3
commit 74a72baf204fd509bbe8b53eec35e39869d94341 upstream. Fix sync mode setting by applying the necessary shift bits. Fixes: fff7352bf7a3 ("iio: imu: Add support for adis16475") Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240405045309.816328-2-ramona.bolboaca13@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03iio: accel: adxl367: fix I2C FIFO data registerCosmin Tanislav1-1/+1
commit 11dadb631007324c7a8bcb2650eda88ed2b9eed0 upstream. As specified in the datasheet, the I2C FIFO data register is 0x18, not 0x42. 0x42 was used by mistake when adapting the ADXL372 driver. Fix this mistake. Fixes: cbab791c5e2a ("iio: accel: add ADXL367 driver") Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240207033657.206171-2-demonsingur@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03iio: accel: adxl367: fix DEVID read after resetCosmin Tanislav1-2/+6
commit 1b926914bbe4e30cb32f268893ef7d82a85275b8 upstream. regmap_read_poll_timeout() will not sleep before reading, causing the first read to return -ENXIO on I2C, since the chip does not respond to it while it is being reset. The datasheet specifies that a soft reset operation has a latency of 7.5ms. Add a 15ms sleep between reset and reading the DEVID register, and switch to a simple regmap_read() call. Fixes: cbab791c5e2a ("iio: accel: add ADXL367 driver") Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240207033657.206171-1-demonsingur@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23iio: imu: bno055: serdev requires REGMAPRandy Dunlap1-0/+1
commit 35ec2d03b282a939949090bd8c39eb37a5856721 upstream. There are a ton of build errors when REGMAP is not set, so select REGMAP to fix all of them. Examples (not all of them): ../drivers/iio/imu/bno055/bno055_ser_core.c:495:15: error: variable 'bno055_ser_regmap_bus' has initializer but incomplete type 495 | static struct regmap_bus bno055_ser_regmap_bus = { ../drivers/iio/imu/bno055/bno055_ser_core.c:496:10: error: 'struct regmap_bus' has no member named 'write' 496 | .write = bno055_ser_write_reg, ../drivers/iio/imu/bno055/bno055_ser_core.c:497:10: error: 'struct regmap_bus' has no member named 'read' 497 | .read = bno055_ser_read_reg, ../drivers/iio/imu/bno055/bno055_ser_core.c: In function 'bno055_ser_probe': ../drivers/iio/imu/bno055/bno055_ser_core.c:532:18: error: implicit declaration of function 'devm_regmap_init'; did you mean 'vmem_map_init'? [-Werror=implicit-function-declaration] 532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus, ../drivers/iio/imu/bno055/bno055_ser_core.c:532:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus, ../drivers/iio/imu/bno055/bno055_ser_core.c: At top level: ../drivers/iio/imu/bno055/bno055_ser_core.c:495:26: error: storage size of 'bno055_ser_regmap_bus' isn't known 495 | static struct regmap_bus bno055_ser_regmap_bus = { Fixes: 2eef5a9cc643 ("iio: imu: add BNO055 serdev driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andrea Merello <andrea.merello@iit.it> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-iio@vger.kernel.org Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240110185611.19723-1-rdunlap@infradead.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23iio: accel: bma400: Fix a compilation problemMario Limonciello1-0/+2
commit 4cb81840d8f29b66d9d05c6d7f360c9560f7e2f4 upstream. The kernel fails when compiling without `CONFIG_REGMAP_I2C` but with `CONFIG_BMA400`. ``` ld: drivers/iio/accel/bma400_i2c.o: in function `bma400_i2c_probe': bma400_i2c.c:(.text+0x23): undefined reference to `__devm_regmap_init_i2c' ``` Link: https://download.01.org/0day-ci/archive/20240131/202401311634.FE5CBVwe-lkp@intel.com/config Fixes: 465c811f1f20 ("iio: accel: Add driver for the BMA400") Fixes: 9bea10642396 ("iio: accel: bma400: add support for bma400 spi") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240131225246.14169-1-mario.limonciello@amd.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23iio: core: fix memleak in iio_device_register_sysfsDinghao Liu1-1/+4
commit 95a0d596bbd0552a78e13ced43f2be1038883c81 upstream. When iio_device_register_sysfs_group() fails, we should free iio_dev_opaque->chan_attr_group.attrs to prevent potential memleak. Fixes: 32f171724e5c ("iio: core: rework iio device group creation") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20231208073119.29283-1-dinghao.liu@zju.edu.cn Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23iio: magnetometer: rm3100: add boundary check for the value read from ↵zhili.liu1-2/+8
RM3100_REG_TMRC commit 792595bab4925aa06532a14dd256db523eb4fa5e upstream. Recently, we encounter kernel crash in function rm3100_common_probe caused by out of bound access of array rm3100_samp_rates (because of underlying hardware failures). Add boundary check to prevent out of bound access. Fixes: 121354b2eceb ("iio: magnetometer: Add driver support for PNI RM3100") Suggested-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: zhili.liu <zhili.liu@ucas.com.cn> Link: https://lore.kernel.org/r/1704157631-3814-1-git-send-email-zhouzhouyi@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMPSrinivas Pandruvada1-0/+1
commit 621c6257128149e45b36ffb973a01c3f3461b893 upstream. When als_capture_sample() is called with usage ID HID_USAGE_SENSOR_TIME_TIMESTAMP, return 0. The HID sensor core ignores the return value for capture_sample() callback, so return value doesn't make difference. But correct the return value to return success instead of -EINVAL. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20240204125617.2635574-1-srinivas.pandruvada@linux.intel.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-01iio: adc: ad7091r: Enable internal vref if external vref is not suppliedMarcelo Schmitt2-0/+9
[ Upstream commit e71c5c89bcb165a02df35325aa13d1ee40112401 ] The ADC needs a voltage reference to work correctly. Users can provide an external voltage reference or use the chip internal reference to operate the ADC. The availability of an in chip reference for the ADC saves the user from having to supply an external voltage reference, which makes the external reference an optional property as described in the device tree documentation. Though, to use the internal reference, it must be enabled by writing to the configuration register. Enable AD7091R internal voltage reference if no external vref is supplied. Fixes: 260442cc5be4 ("iio: adc: ad7091r5: Add scale and external VREF support") Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/b865033fa6a4fc4bf2b4a98ec51a6144e0f64f77.1703013352.git.marcelo.schmitt1@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01iio: adc: ad7091r: Allow users to configure device eventsMarcelo Schmitt3-24/+166
[ Upstream commit 020e71c7ffc25dfe29ed9be6c2d39af7bd7f661f ] AD7091R-5 devices are supported by the ad7091r-5 driver together with the ad7091r-base driver. Those drivers declared iio events for notifying user space when ADC readings fall bellow the thresholds of low limit registers or above the values set in high limit registers. However, to configure iio events and their thresholds, a set of callback functions must be implemented and those were not present until now. The consequence of trying to configure ad7091r-5 events without the proper callback functions was a null pointer dereference in the kernel because the pointers to the callback functions were not set. Implement event configuration callbacks allowing users to read/write event thresholds and enable/disable event generation. Since the event spec structs are generic to AD7091R devices, also move those from the ad7091r-5 driver the base driver so they can be reused when support for ad7091r-2/-4/-8 be added. Fixes: ca69300173b6 ("iio: adc: Add support for AD7091R5 ADC") Suggested-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/59552d3548dabd56adc3107b7b4869afee2b0c3c.1703013352.git.marcelo.schmitt1@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01iio: adc: ad7091r: Set alert bit in config registerMarcelo Schmitt1-0/+6
[ Upstream commit 149694f5e79b0c7a36ceb76e7c0d590db8f151c1 ] The ad7091r-base driver sets up an interrupt handler for firing events when inputs are either above or below a certain threshold. However, for the interrupt signal to come from the device it must be configured to enable the ALERT/BUSY/GPO pin to be used as ALERT, which was not being done until now. Enable interrupt signals on the ALERT/BUSY/GPO pin by setting the proper bit in the configuration register. Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/e8da2ee98d6df88318b14baf3dc9630e20218418.1702746240.git.marcelo.schmitt1@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Stable-dep-of: 020e71c7ffc2 ("iio: adc: ad7091r: Allow users to configure device events") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26iio: adc: ad9467: fix scale settingNuno Sa2-59/+62
[ Upstream commit b73f08bb7fe5a0901646ca5ceaa1e7a2d5ee6293 ] When reading in_voltage_scale we can get something like: root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale 0.038146 However, when reading the available options: root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale_available 2000.000000 2100.000006 2200.000007 2300.000008 2400.000009 2500.000010 which does not make sense. Moreover, when trying to set a new scale we get an error because there's no call to __ad9467_get_scale() to give us values as given when reading in_voltage_scale. Fix it by computing the available scales during probe and properly pass the list when .read_available() is called. While at it, change to use .read_available() from iio_info. Also note that to properly fix this, adi-axi-adc.c has to be changed accordingly. Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26iio: adc: ad9467: don't ignore error codesNuno Sa1-10/+17
[ Upstream commit e072e149cfb827e0ab4cafb0547e9658e35393cd ] Make sure functions that return errors are not ignored. Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-2-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26iio: adc: ad9467: fix reset gpio handlingNuno Sa1-13/+18
[ Upstream commit 76f028539cf360f750efd8cde560edda298e4c6b ] The reset gpio was being handled with inverted polarity. This means that as far as gpiolib is concerned we were actually leaving the pin asserted (in theory, this would mean reset). However, inverting the polarity in devicetree made things work. Fix it by doing it the proper way and how gpiolib expects it to be done. While at it, moved the handling to it's own function and dropped 'reset_gpio' from the 'struct ad9467_state' as we only need it during probe. On top of that, refactored things so that we now request the gpio asserted (i.e in reset) and then de-assert it. Also note that we now use gpiod_set_value_cansleep() instead of gpiod_direction_output() as we already request the pin as output. Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-1-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26iio: adc: ad7091r: Pass iio_dev to event handlerMarcelo Schmitt1-3/+3
commit a25a7df518fc71b1ba981d691e9322e645d2689c upstream. Previous version of ad7091r event handler received the ADC state pointer and retrieved the iio device from driver data field with dev_get_drvdata(). However, no driver data have ever been set, which led to null pointer dereference when running the event handler. Pass the iio device to the event handler and retrieve the ADC state struct from it so we avoid the null pointer dereference and save the driver from filling the driver data field. Fixes: ca69300173b6 ("iio: adc: Add support for AD7091R5 ADC") Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://lore.kernel.org/r/5024b764107463de9578d5b3b0a3d5678e307b1a.1702746240.git.marcelo.schmitt1@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-05iio: imu: adis16475: add spi_device_id tableNuno Sa1-45/+72
[ Upstream commit ee4d79055aeea27f1b8c42233cc0c90d0a8b5355 ] This prevents the warning message "SPI driver has no spi_device_id for..." when registering the driver. More importantly, it makes sure that module autoloading works as spi relies on spi: modaliases and not of. While at it, move the of_device_id table to it's natural place. Fixes: fff7352bf7a3c ("iio: imu: Add support for adis16475") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231102125258.3284830-1-nuno.sa@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-01iio: triggered-buffer: prevent possible freeing of wrong bufferDavid Lechner1-0/+10
commit bce61476dc82f114e24e9c2e11fb064781ec563c upstream. Commit ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers") introduced support for multiple buffers per indio_dev but left indio_dev->buffer for a few legacy use cases. In the case of the triggered buffer, iio_triggered_buffer_cleanup() still assumes that indio_dev->buffer points to the buffer allocated by iio_triggered_buffer_setup_ext(). However, since iio_triggered_buffer_setup_ext() now calls iio_device_attach_buffer() to attach the buffer, indio_dev->buffer will only point to the buffer allocated by iio_device_attach_buffer() if it the first buffer attached. This adds a check to make sure that no other buffer has been attached yet to ensure that indio_dev->buffer will be assigned when iio_device_attach_buffer() is called. As per discussion in the review thread, we may want to deal with multiple triggers per device, but this is a fix for the issue in the meantime and any such support would be unlikely to be suitable for a backport. Fixes: ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers") Signed-off-by: David Lechner <dlechner@baylibre.com> Acked-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231031210521.1661552-1-dlechner@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-01iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()Wadim Egorov1-1/+3
commit 60576e84c187043cef11f11d015249e71151d35a upstream. Fix wrong handling of a DMA request where the probing only failed if -EPROPE_DEFER was returned. Instead, let us fail if a non -ENODEV value is returned. This makes DMAs explicitly optional. Even if the DMA request is unsuccessfully, the ADC can still work properly. We do also handle the defer probe case by making use of dev_err_probe(). Fixes: f438b9da75eb ("drivers: iio: ti_am335x_adc: add dma support") Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Bhavya Kapoor <b-kapoor@ti.com> Link: https://lore.kernel.org/r/20230925134427.214556-1-w.egorov@phytec.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-01iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time tableJavier Carrasco1-2/+2
commit 54cf39ec16335dadbe1ba008d8e5e98dae3e26f8 upstream. The HTU21 offers 4 sampling frequencies: 20, 40, 70 and 120, which are associated to an index that is used to select the right measurement resolution and its corresponding measurement time. The current implementation selects the measurement resolution and the temperature measurement time properly, but it does not select the right humidity measurement time in all cases. In summary, the 40 and 70 humidity measurement times are swapped. The reason for that is probably the unusual coding for the measurement resolution. According to the datasheet, the bits [7,0] of the "user register" are used as follows to select the bit resolution: -------------------------------------------------- | Bit 7 | Bit 0 | RH | Temp | Trh (us) | Tt (us) | -------------------------------------------------- | 0 | 0 | 12 | 14 | 16000 | 50000 | -------------------------------------------------- | 0 | 1 | 8 | 12 | 3000 | 13000 | -------------------------------------------------- | 1 | 0 | 10 | 13 | 5000 | 25000 | -------------------------------------------------- | 1 | 1 | 11 | 11 | 8000 | 7000 | -------------------------------------------------- *This table is available in the official datasheet, page 13/21. I have just appended the times provided in the humidity/temperature tables, pages 3/21, 5/21. Note that always a pair of resolutions is selected. The sampling frequencies [20, 40, 70, 120] are assigned to a linear index [0..3] which is then coded as follows [1]: Index [7,0] -------------- idx 0 0,0 idx 1 1,0 idx 2 0,1 idx 3 1,1 That is done that way because the temperature measurements are being used as the reference for the sampling frequency (the frequencies and the temperature measurement times are correlated), so increasing the index always reduces the temperature measurement time and its resolution. Therefore, the temperature measurement time array is as simple as [50000, 25000, 13000, 7000] On the other hand, the humidity resolution cannot follow the same pattern because of the way it is coded in the "user register", where both resolutions are selected at the same time. The humidity measurement time array is the following: [16000, 3000, 5000, 8000], which defines the following assignments: Index [7,0] Trh ----------------------- idx 0 0,0 16000 -> right, [0,0] selects 12 bits (Trh = 16000) idx 1 1,0 3000 -> wrong! [1,0] selects 10 bits (Trh = 5000) idx 2 0,1 5000 -> wrong! [0,1] selects 8 bits (Trh = 3000) idx 3 1,1 8000 -> right, [1,1] selects 11 bits (Trh = 8000) The times have been ordered as if idx = 1 -> [0,1] and idx = 2 -> [1,0], which is not the case for the reason explained above. So a simple modification is required to obtain the right humidity measurement time array, swapping the values in the positions 1 and 2. The right table should be the following: [16000, 5000, 3000, 8000] Fix the humidity measurement time array with the right idex/value coding. [1] The actual code that makes this coding and assigns it to the current value of the "user register" is the following: config_reg &= 0x7E; config_reg |= ((i & 1) << 7) + ((i & 2) >> 1); Fixes: d574a87cc311 ("Add meas-spec sensors common part") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231026-topic-htu21_conversion_time-v1-1-bd257dc44209@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-01iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_rawSu Hui1-2/+2
[ Upstream commit c3df0e29fb7788c4b3ddf37d5ed87dda2b822943 ] inv_mpu6050_sensor_show() can return -EINVAL or IIO_VAL_INT. Return the true value rather than only return IIO_VAL_INT. Fixes: d5098447147c ("iio: imu: mpu6050: add calibration offset support") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://lore.kernel.org/r/20231030020218.65728-1-suhui@nfschina.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28iio: adc: stm32-adc: harden against NULL pointer deref in stm32_adc_probe()Zhang Shurong1-2/+7
[ Upstream commit 3a23b384e7e3d64d5587ad10729a34d4f761517e ] of_match_device() may fail and returns a NULL pointer. In practice there is no known reasonable way to trigger this, but in case one is added in future, harden the code by adding the check Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Link: https://lore.kernel.org/r/tencent_994DA85912C937E3B5405BA960B31ED90A08@qq.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20iio: frequency: adf4350: Use device managed functions and fix power down issue.Jinjie Ruan1-52/+23
[ Upstream commit 9979cc64853b598518a485c2e554657d5c7a00c8 ] The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. Also replace devm_regulator_get() and regulator_enable() with devm_regulator_get_enable() helper and remove regulator_disable(). Replace iio_device_register() with devm_iio_device_register() and remove iio_device_unregister(). And st->reg is not used anymore, so remove it. As Jonathan pointed out, couple of things that are wrong: 1) The device is powered down 'before' we unregister it with the subsystem and as such userspace interfaces are still exposed which probably won't do the right thing if the chip is powered down. 2) This isn't done in the error paths in probe. To solve this problem, register a new callback adf4350_power_down() with devm_add_action_or_reset(), to enable software power down in both error and device detach path. So the remove function can be removed. Remove spi_set_drvdata() from the probe function, since spi_get_drvdata() is not used anymore. Fixes: e31166f0fd48 ("iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230828062717.2310219-1-ruanjinjie@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-02iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScaleRobert Hancock2-3/+16
commit e2bd8c28b9bd835077eb65715d416d667694a80d upstream. The driver was previously using offset and scale values for the temperature sensor readings which were only valid for 7-series devices. Add per-device-type values for offset and scale and set them appropriately for each device type. Note that the values used for the UltraScale family are for UltraScale+ (i.e. the SYSMONE4 primitive) using the internal reference, as that seems to be the most common configuration and the device tree values Xilinx's device tree generator produces don't seem to give us anything to tell us which configuration is used. However, the differences within the UltraScale family seem fairly minor and it's closer than using the 7-series values instead in any case. Fixes: c2b7720a7905 ("iio: xilinx-xadc: Add basic support for Ultrascale System Monitor") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com> Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com> Link: https://lore.kernel.org/r/20230915001019.2862964-3-robert.hancock@calian.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-02iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholdsRobert Hancock1-22/+0
commit 8d6b3ea4d9eaca80982442b68a292ce50ce0a135 upstream. In the probe function, the driver was reading out the thresholds already set in the core, which can be configured by the user in the Vivado tools when the FPGA image is built. However, it later clobbered those values with zero or maximum values. In particular, the overtemperature shutdown threshold register was overwritten with the max value, which effectively prevents the FPGA from shutting down when the desired threshold was eached, potentially risking hardware damage in that case. Remove this code to leave the preconfigured default threshold values intact. The code was also disabling all alarms regardless of what enable state they were left in by the FPGA image, including the overtemperature shutdown feature. Leave these bits in their original state so they are not unconditionally disabled. Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com> Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com> Link: https://lore.kernel.org/r/20230915001019.2862964-2-robert.hancock@calian.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-02iio: exynos-adc: request second interupt only when touchscreen mode is usedMarek Szyprowski1-10/+14
commit 865b080e3229102f160889328ce2e8e97aa65ea0 upstream. Second interrupt is needed only when touchscreen mode is used, so don't request it unconditionally. This removes the following annoying warning during boot: exynos-adc 14d10000.adc: error -ENXIO: IRQ index 1 not found Fixes: 2bb8ad9b44c5 ("iio: exynos-adc: add experimental touchscreen support") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20231009101412.916922-1-m.szyprowski@samsung.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-02iio: afe: rescale: Accept only offset channelsLinus Walleij1-4/+15
commit bee448390e5166d019e9e037194d487ee94399d9 upstream. As noted by Jonathan Cameron: it is perfectly legal for a channel to have an offset but no scale in addition to the raw interface. The conversion will imply that scale is 1:1. Make rescale_configure_channel() accept just scale, or just offset to process a channel. When a user asks for IIO_CHAN_INFO_OFFSET in rescale_read_raw() we now have to deal with the fact that OFFSET could be present but SCALE missing. Add code to simply scale 1:1 in this case. Link: https://lore.kernel.org/linux-iio/CACRpkdZXBjHU4t-GVOCFxRO-AHGxKnxMeHD2s4Y4PuC29gBq6g@mail.gmail.com/ Fixes: 53ebee949980 ("iio: afe: iio-rescale: Support processed channels") Fixes: 9decacd8b3a4 ("iio: afe: rescale: Fix boolean logic bug") Reported-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20230902-iio-rescale-only-offset-v2-1-988b807754c8@linaro.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25iio: adc: ad7192: Correct reference voltageAlisa-Dariana Roman1-4/+25
[ Upstream commit 7e7dcab620cd6d34939f615cac63fc0ef7e81c72 ] The avdd and the reference voltage are two different sources but the reference voltage was assigned according to the avdd supply. Add vref regulator structure and set the reference voltage according to the vref supply from the devicetree. In case vref supply is missing, reference voltage is set according to the avdd supply for compatibility with old devicetrees. Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging") Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230924152149.41884-1-alisadariana@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25iio: adc: ad7192: Simplify using devm_regulator_get_enable()Matti Vaittinen1-13/+2
[ Upstream commit 1ccef2e6e9205e209ad958d2e591bcca60981007 ] Use devm_regulator_get_enable() instead of open coded get, enable, add-action-to-disable-at-detach - pattern. Also drop the seemingly unused struct member 'dvdd'. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/9719c445c095d3d308e2fc9f4f93294f5806c41c.1660934107.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Stable-dep-of: 7e7dcab620cd ("iio: adc: ad7192: Correct reference voltage") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()Tzung-Bi Shih1-1/+5
[ Upstream commit 7771c8c80d62ad065637ef74ed2962983f6c5f6d ] cros_ec_sensors_push_data() reads `indio_dev->active_scan_mask` and calls iio_push_to_buffers_with_timestamp() without making sure the `indio_dev` stays in buffer mode. There is a race if `indio_dev` exits buffer mode right before cros_ec_sensors_push_data() accesses them. An use-after-free on `indio_dev->active_scan_mask` was observed. The call trace: [...] _find_next_bit cros_ec_sensors_push_data cros_ec_sensorhub_event blocking_notifier_call_chain cros_ec_irq_thread It was caused by a race condition: one thread just freed `active_scan_mask` at [1]; while another thread tried to access the memory at [2]. Fix it by calling iio_device_claim_buffer_mode() to ensure the `indio_dev` can't exit buffer mode during cros_ec_sensors_push_data(). [1]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/industrialio-buffer.c#L1189 [2]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c#L198 Cc: stable@vger.kernel.org Fixes: aa984f1ba4a4 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO") Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230829030622.1571852-1-tzungbi@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25iio: core: introduce iio_device_{claim|release}_buffer_mode() APIsNuno Sá1-0/+38
[ Upstream commit 0a8565425afd8ba0e1a0ea73e21da119ee6dacea ] These APIs are analogous to iio_device_claim_direct_mode() and iio_device_release_direct_mode() but, as the name suggests, with the logic flipped. While this looks odd enough, it will have at least two users (in following changes) and it will be important to move the IIO mlock to the private struct. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20221012151620.1725215-2-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Stable-dep-of: 7771c8c80d62 ("iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-20iio: addac: Kconfig: update ad74413r selectionsAntoniu Miclaus1-0/+2
commit b120dd3a15582fb7a959cecb05e4d9814fcba386 upstream. Building ad74413r without selecting IIO_BUFFER and IIO_TRIGGERED_BUFFER generates error with respect to the iio trigger functions that are used within the driver. Update the Kconfig accordingly. Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20230912085421.51102-1-antoniu.miclaus@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: pressure: ms5611: ms5611_prom_is_valid false negative bugAlexander Zangerl1-1/+1
commit fd39d9668f2ce9f4b05ad55e8c8d80c098073e0b upstream. The ms5611 driver falsely rejects lots of MS5607-02BA03-50 chips with "PROM integrity check failed" because it doesn't accept a prom crc value of zero as legitimate. According to the datasheet for this chip (and the manufacturer's application note about the PROM CRC), none of the possible values for the CRC are excluded - but the current code in ms5611_prom_is_valid() ends with return crc_orig != 0x0000 && crc == crc_orig Discussed with the driver author (Tomasz Duszynski) and he indicated that at that time (2015) he was dealing with some faulty chip samples which returned blank data under some circumstances and/or followed example code which indicated CRC zero being bad. As far as I can tell this exception should not be applied anymore; We've got a few hundred custom boards here with this chip where large numbers of the prom have a legitimate CRC value 0, and do work fine, but which the current driver code wrongly rejects. Signed-off-by: Alexander Zangerl <az@breathe-safe.com> Fixes: c0644160a8b5 ("iio: pressure: add support for MS5611 pressure and temperature sensor") Link: https://lore.kernel.org/r/2535-1695168070.831792@Ze3y.dhYT.s3fx Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: pressure: dps310: Adjust Timeout SettingsLakshmi Yadlapati1-4/+4
commit 901a293fd96fb9bab843ba4cc7be3094a5aa7c94 upstream. The DPS310 sensor chip has been encountering intermittent errors while reading the sensor device across various system designs. This issue causes the chip to become "stuck," preventing the indication of "ready" status for pressure and temperature measurements in the MEAS_CFG register. To address this issue, this commit fixes the timeout settings to improve sensor stability: - After sending a reset command to the chip, the timeout has been extended from 2.5 ms to 15 ms, aligning with the DPS310 specification. - The read timeout value of the MEAS_CFG register has been adjusted from 20ms to 30ms to match the specification. Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Fixes: 7b4ab4abcea4 ("iio: pressure: dps310: Reset chip after timeout") Link: https://lore.kernel.org/r/20230829180222.3431926-2-lakshmiy@us.ibm.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: admv1013: add mixer_vgate corner casesAntoniu Miclaus1-2/+2
commit 287d998af24326b009ae0956820a3188501b34a0 upstream. Include the corner cases in the computation of the MIXER_VGATE register value. According to the datasheet: The MIXER_VGATE values follows the VCM such as, that for a 0V to 1.8V VCM, MIXER_VGATE = 23.89 VCM + 81, and for a > 1.8V to 2.6V VCM, MIXER_VGATE = 23.75 VCM + 1.25. Fixes: da35a7b526d9 ("iio: frequency: admv1013: add support for ADMV1013") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230807143806.6954-1-antoniu.miclaus@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: dac: ad3552r: Correct device IDsMarcelo Schmitt1-2/+2
commit 9a85653ed3b9a9b7b31d95a34b64b990c3d33ca1 upstream. Device IDs for AD3542R and AD3552R were swapped leading to unintended collection of DAC output ranges being used for each design. Change device ID values so they are correct for each DAC chip. Fixes: 8f2b54824b28 ("drivers:iio:dac: Add AD3552R driver support") Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Reported-by: Chandrakant Minajigi <Chandrakant.Minajigi@analog.com> Link: https://lore.kernel.org/r/011f480220799fbfabdd53896f8a2f251ad995ad.1691091324.git.marcelo.schmitt1@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: adc: imx8qxp: Fix address for command buffer registersPhilipp Rossak1-2/+2
commit 850101b3598277794f92a9e363a60a66e0d42890 upstream. The ADC Command Buffer Register high and low are currently pointing to the wrong address and makes it impossible to perform correct ADC measurements over all channels. According to the datasheet of the imx8qxp the ADC_CMDL register starts at address 0x100 and the ADC_CMDH register starts at address 0x104. This bug seems to be in the kernel since the introduction of this driver. This can be observed by checking all raw voltages of the adc and they are all nearly identical: cat /sys/bus/iio/devices/iio\:device0/in_voltage*_raw 3498 3494 3491 3491 3489 3490 3490 3490 Fixes: 1e23dcaa1a9fa ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC") Signed-off-by: Philipp Rossak <embed3d@gmail.com> Acked-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20230904220204.23841-1-embed3d@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: imu: bno055: Fix missing Kconfig dependenciesJonathan Cameron1-0/+2
commit c9b9cfe7d342683f624a89c3b617be18aff879e8 upstream. This driver uses IIO triggered buffers so it needs to select them in Kconfig. on riscv-32bit: /opt/crosstool/gcc-13.2.0-nolibc/riscv32-linux/bin/riscv32-linux-ld: drivers/iio/imu/bno055/bno055.o: in function `.L367': bno055.c:(.text+0x2c96): undefined reference to `devm_iio_triggered_buffer_setup_ext' Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/linux-next/40566b4b-3950-81fe-ff14-871d8c447627@infradead.org/ Fixes: 4aefe1c2bd0c ("iio: imu: add Bosch Sensortec BNO055 core driver") Cc: Andrea Merello <andrea.merello@iit.it> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230903113052.846298-1-jic23@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: pressure: bmp280: Fix NULL pointer exceptionPhil Elwell1-1/+1
commit 85dfb43bf69281adb1f345dfd9a39faf2e5a718d upstream. The bmp085 EOC IRQ support is optional, but the driver's common probe function queries the IRQ properties whether or not it exists, which can trigger a NULL pointer exception. Avoid any exception by making the query conditional on the possession of a valid IRQ. Fixes: aae953949651 ("iio: pressure: bmp280: add support for BMP085 EOC interrupt") Signed-off-by: Phil Elwell <phil@raspberrypi.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230811155829.51208-1-phil@raspberrypi.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13iio: accel: adxl313: Fix adxl313_i2c_id[] tableBiju Das1-2/+2
[ Upstream commit f636554c4cd1c644109cc525900a056495b86cc9 ] The .driver_data in adxl313_i2c_id[] for adxl312 and adxl314 is wrong. Fix this issue by adding corresponding adxl31x_chip_info data. Reported-by: Jonathan Cameron <jic23@kernel.org> Closes: https://lore.kernel.org/all/20230722172832.04ad7738@jic23-huawei Fixes: a7a1c60bc4c9 ("drivers: iio: accel: adxl312 and adxl314 support") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230725171624.331283-2-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-16iio: core: Prevent invalid memory access when there is no parentMilan Zamazal1-2/+3
commit b2a69969908fcaf68596dfc04369af0fe2e1d2f7 upstream. Commit 813665564b3d ("iio: core: Convert to use firmware node handle instead of OF node") switched the kind of nodes to use for label retrieval in device registration. Probably an unwanted change in that commit was that if the device has no parent then NULL pointer is accessed. This is what happens in the stock IIO dummy driver when a new entry is created in configfs: # mkdir /sys/kernel/config/iio/devices/dummy/foo BUG: kernel NULL pointer dereference, address: ... ... Call Trace: __iio_device_register iio_dummy_probe Since there seems to be no reason to make a parent device of an IIO dummy device mandatory, let’s prevent the invalid memory access in __iio_device_register when the parent device is NULL. With this change, the IIO dummy driver works fine with configfs. Fixes: 813665564b3d ("iio: core: Convert to use firmware node handle instead of OF node") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Link: https://lore.kernel.org/r/20230719083208.88149-1-mzamazal@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16iio: adc: ina2xx: avoid NULL pointer dereference on OF device matchAlvin Šipraga1-3/+6
commit a41e19cc0d6b6a445a4133170b90271e4a2553dc upstream. The affected lines were resulting in a NULL pointer dereference on our platform because the device tree contained the following list of compatible strings: power-sensor@40 { compatible = "ti,ina232", "ti,ina231"; ... }; Since the driver doesn't declare a compatible string "ti,ina232", the OF matching succeeds on "ti,ina231". But the I2C device ID info is populated via the first compatible string, cf. modalias population in of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy I2C device ID table either, the struct i2c_device_id *id pointer in the probe function is NULL. Fix this by using the already populated type variable instead, which points to the proper driver data. Since the name is also wanted, add a generic one to the ina2xx_config table. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Fixes: c43a102e67db ("iio: ina2xx: add support for TI INA2xx Power Monitors") Link: https://lore.kernel.org/r/20230619141239.2257392-1-alvin@pqrs.dk Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16iio: adc: ad7192: Fix ac excitation featureAlisa Roman1-8/+8
commit 6bc471b6c3aeaa7b95d1b86a1bb8d91a3c341fa5 upstream. AC excitation enable feature exposed to user on AD7192, allowing a bit which should be 0 to be set. This feature is specific only to AD7195. AC excitation attribute moved accordingly. In the AD7195 documentation, the AC excitation enable bit is on position 22 in the Configuration register. ACX macro changed to match correct register and bit. Note that the fix tag is for the commit that moved the driver out of staging. Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging") Signed-off-by: Alisa Roman <alisa.roman@analog.com> Cc: stable@vger.kernel.org Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230614155242.160296-1-alisa.roman@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16iio: frequency: admv1013: propagate errors from regulator_get_voltage()Dan Carpenter1-1/+4
commit 507397d19b5a296aa339f7a1bd16284f668a1906 upstream. The regulator_get_voltage() function returns negative error codes. This function saves it to an unsigned int and then does some range checking and, since the error code falls outside the correct range, it returns -EINVAL. Beyond the messiness, this is bad because the regulator_get_voltage() function can return -EPROBE_DEFER and it's important to propagate that back properly so it can be handled. Fixes: da35a7b526d9 ("iio: frequency: admv1013: add support for ADMV1013") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/ce75aac3-2aba-4435-8419-02e59fdd862b@moroto.mountain Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16iio: cros_ec: Fix the allocation size for cros_ec_commandYiyuan Guo1-1/+1
commit 8a4629055ef55177b5b63dab1ecce676bd8cccdd upstream. The struct cros_ec_command contains several integer fields and a trailing array. An allocation size neglecting the integer fields can lead to buffer overrun. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Yiyuan Guo <yguoaz@gmail.com> Fixes: 974e6f02e27e ("iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.") Link: https://lore.kernel.org/r/20230630143719.1513906-1-yguoaz@gmail.com Cc: <Stable@vger.kerenl.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 11:50:53 +0300