summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/i40iw/i40iw_verbs.c
AgeCommit message (Collapse)AuthorFilesLines
2021-06-03RDMA/irdma: Add irdma Kconfig/Makefile and remove i40iwShiraz Saleem1-2652/+0
Add Kconfig and Makefile to build irdma driver. Remove i40iw driver and add an alias in irdma. Remove legacy exported symbols i40e_register_client and i40e_unregister_client from i40e as they are no longer used. irdma is the replacement driver that supports X722. Link: https://lore.kernel.org/r/20210602205138.889-16-shiraz.saleem@intel.com Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-26RDMA: Support more than 255 rdma portsMark Bloch1-5/+5
Current code uses many different types when dealing with a port of a RDMA device: u8, unsigned int and u32. Switch to u32 to clean up the logic. This allows us to make (at least) the core view consistent and use the same type. Unfortunately not all places can be converted. Many uverbs functions expect port to be u8 so keep those places in order not to break UAPIs. HW/Spec defined values must also not be changed. With the switch to u32 we now can support devices with more than 255 ports. U32_MAX is reserved to make control logic a bit easier to deal with. As a device with U32_MAX ports probably isn't going to happen any time soon this seems like a non issue. When a device with more than 255 ports is created uverbs will report the RDMA device as having 255 ports as this is the max currently supported. The verbs interface is not changed yet because the IBTA spec limits the port size in too many places to be u8 and all applications that relies in verbs won't be able to cope with this change. At this stage, we are extending the interfaces that are using vendor channel solely Once the limitation is lifted mlx5 in switchdev mode will be able to have thousands of SFs created by the device. As the only instance of an RDMA device that reports more than 255 ports will be a representor device and it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other ULPs aren't effected by this change and their sysfs/interfaces that are exposes to userspace can remain unchanged. While here cleanup some alignment issues and remove unneeded sanity checks (mainly in rdmavt), Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-22RDMA: Fix kernel-doc compilation warningsLeon Romanovsky1-2/+2
This patch fixes bunch of kernel-doc compilation warnings like below: drivers/infiniband/hw/i40iw/i40iw_cm.c:4372: warning: expecting prototype for i40iw_ifdown_notify(). Prototype was for i40iw_if_notify() instead Link: https://lore.kernel.org/r/20210314133908.291945-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-20RDMA/hw/i40iw/i40iw_verbs: Fix worthy function headers and demote some othersLee Jones1-9/+10
Fixes the following W=1 kernel build warning(s): drivers/infiniband/hw/i40iw/i40iw_verbs.c:273: warning: Excess function parameter 'iwdev' description in 'i40iw_free_qp_resources' drivers/infiniband/hw/i40iw/i40iw_verbs.c:273: warning: Excess function parameter 'qp_num' description in 'i40iw_free_qp_resources' drivers/infiniband/hw/i40iw/i40iw_verbs.c:307: warning: Function parameter or member 'udata' not described in 'i40iw_destroy_qp' drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Function parameter or member 'iwdev' not described in 'i40iw_setup_virt_qp' drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Function parameter or member 'iwqp' not described in 'i40iw_setup_virt_qp' drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Excess function parameter 'dev' description in 'i40iw_setup_virt_qp' drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Excess function parameter 'qp' description in 'i40iw_setup_virt_qp' drivers/infiniband/hw/i40iw/i40iw_verbs.c:1248: warning: Function parameter or member 'pg_size' not described in 'i40iw_check_mem_contiguous' drivers/infiniband/hw/i40iw/i40iw_verbs.c:1264: warning: Function parameter or member 'pg_size' not described in 'i40iw_check_mr_contiguous' drivers/infiniband/hw/i40iw/i40iw_verbs.c:1539: warning: Function parameter or member 'sg_offset' not described in 'i40iw_map_mr_sg' drivers/infiniband/hw/i40iw/i40iw_verbs.c:1886: warning: Function parameter or member 'udata' not described in 'i40iw_dereg_mr' drivers/infiniband/hw/i40iw/i40iw_verbs.c:1953: warning: Function parameter or member 'dev' not described in 'hw_rev_show' drivers/infiniband/hw/i40iw/i40iw_verbs.c:1953: warning: Function parameter or member 'attr' not described in 'hw_rev_show' drivers/infiniband/hw/i40iw/i40iw_verbs.c:1953: warning: Function parameter or member 'buf' not described in 'hw_rev_show' drivers/infiniband/hw/i40iw/i40iw_verbs.c:1967: warning: Function parameter or member 'dev' not described in 'hca_type_show' drivers/infiniband/hw/i40iw/i40iw_verbs.c:1967: warning: Function parameter or member 'attr' not described in 'hca_type_show' drivers/infiniband/hw/i40iw/i40iw_verbs.c:1967: warning: Function parameter or member 'buf' not described in 'hca_type_show' drivers/infiniband/hw/i40iw/i40iw_verbs.c:1977: warning: Function parameter or member 'dev' not described in 'board_id_show' drivers/infiniband/hw/i40iw/i40iw_verbs.c:1977: warning: Function parameter or member 'attr' not described in 'board_id_show' drivers/infiniband/hw/i40iw/i40iw_verbs.c:1977: warning: Function parameter or member 'buf' not described in 'board_id_show' Link: https://lore.kernel.org/r/20210118223929.512175-18-lee.jones@linaro.org Cc: Faisal Latif <faisal.latif@intel.com> Cc: Shiraz Saleem <shiraz.saleem@intel.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: linux-rdma@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-02RDMA/i40iw: Remove push code from i40iwShiraz Saleem1-85/+1
The push feature does not work as expected in x722 and has historically been disabled in the driver. Purge all remaining code related to the push feature in i40iw. Link: https://lore.kernel.org/r/20201125005616.1800-3-shiraz.saleem@intel.com Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-02Merge tag 'v5.10-rc6' into rdma.git for-nextJason Gunthorpe1-30/+7
For dependencies in following patches Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-25RDMA/i40iw: Address an mmap handler exploit in i40iwShiraz Saleem1-30/+7
i40iw_mmap manipulates the vma->vm_pgoff to differentiate a push page mmap vs a doorbell mmap, and uses it to compute the pfn in remap_pfn_range without any validation. This is vulnerable to an mmap exploit as described in: https://lore.kernel.org/r/20201119093523.7588-1-zhudi21@huawei.com The push feature is disabled in the driver currently and therefore no push mmaps are issued from user-space. The feature does not work as expected in the x722 product. Remove the push module parameter and all VMA attribute manipulations for this feature in i40iw_mmap. Update i40iw_mmap to only allow DB user mmapings at offset = 0. Check vm_pgoff for zero and if the mmaps are bound to a single page. Cc: <stable@kernel.org> Fixes: d37498417947 ("i40iw: add files for iwarp interface") Link: https://lore.kernel.org/r/20201125005616.1800-2-shiraz.saleem@intel.com Reported-by: Di Zhu <zhudi21@huawei.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-27RDMA: Convert sysfs device * show functions to use sysfs_emit()Joe Perches1-3/+3
Done with cocci script: @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - sprintf(buf, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - strcpy(buf, chr); + sysfs_emit(buf, chr); ...> } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - sprintf(buf, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... - len += scnprintf(buf + len, PAGE_SIZE - len, + len += sysfs_emit_at(buf, len, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { ... - strcpy(buf, chr); - return strlen(buf); + return sysfs_emit(buf, chr); } Link: https://lore.kernel.org/r/7f406fa8e3aa2552c022bec680f621e38d1fe414.1602122879.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-27RDMA: Remove uverbs cmds from drivers that don't use themJason Gunthorpe1-7/+0
Allowing userspace to invoke these commands is probably going to crash these drivers as they are not tested and not expecting to use them on a user object. For example pvrdma touches cq->ring_state which is not initialized for user QPs. These commands are effected: - IB_USER_VERBS_CMD_REQ_NOTIFY_CQ is ibv_cmd_req_notify_cq() in rdma-core, only hfi1, ipath and rxe calls it. - IB_USER_VERBS_CMD_POLL_CQ is ibv_cmd_poll_cq() in rdma-core, only ipath and hfi1 calls it. - IB_USER_VERBS_CMD_POST_SEND/RECV is ibv_cmd_post_send/recv() in rdma-core, only ipath and hfi1 call them. - IB_USER_VERBS_CMD_POST_SRQ_RECV is ibv_cmd_post_srq_recv() in rdma-core, only ipath and hfi1 calls it. - IB_USER_VERBS_CMD_PEEK_CQ isn't even implemented anywhere - IB_USER_VERBS_CMD_CREATE/DESTROY_AH is ibv_cmd_create/destroy_ah() in rdma-core, only bnxt_re, efa, hfi1, ipath, mlx5, orcrdma, and rxe call it. Link: https://lore.kernel.org/r/10-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-27RDMA: Check create_flags during create_qpJason Gunthorpe1-1/+1
Each driver should check that the QP attrs create_flags is supported. Unfortuantely when create_flags was added to the QP attrs the drivers were not updated. uverbs_ex_cmd_mask was used to block it - even though kernel drivers use these flags too. Check that flags is zero in all drivers that don't use it, remove IB_USER_VERBS_EX_CMD_CREATE_QP from uverbs_ex_cmd_mask. Fix the error code to be EOPNOTSUPP. Link: https://lore.kernel.org/r/8-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-27RDMA: Check flags during create_cqJason Gunthorpe1-0/+3
Each driver should check that the CQ attrs is supported. Unfortuantely when flags was added to the CQ attrs the drivers were not updated, uverbs_ex_cmd_mask was used to block it. This was missed when create CQ was converted to ioctl, so non-zero flags could have been passed into drivers. Check that flags is zero in all drivers that don't use it, remove IB_USER_VERBS_EX_CMD_CREATE_CQ from uverbs_ex_cmd_mask. Fixes: 41b2a71fc848 ("IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new file") Link: https://lore.kernel.org/r/7-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-27RDMA: Check attr_mask during modify_qpJason Gunthorpe1-0/+3
Each driver should check that it can support the provided attr_mask during modify_qp. IB_USER_VERBS_EX_CMD_MODIFY_QP was being used to block modify_qp_ex because the driver didn't check RATE_LIMIT. Link: https://lore.kernel.org/r/6-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-27RDMA: Remove elements in uverbs_cmd_mask that all drivers setJason Gunthorpe1-15/+1
This is a step toward eliminating uverbs_cmd_mask. Preset this list in the core code. Only the op reg_user_mr wasn't already being required from the drivers. Link: https://lore.kernel.org/r/3-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-16RDMA: Explicitly pass in the dma_device to ib_register_deviceJason Gunthorpe1-1/+2
The code in setup_dma_device has become rather convoluted, move all of this to the drivers. Drives now pass in a DMA capable struct device which will be used to setup DMA, or drivers must fully configure the ibdev for DMA and pass in NULL. Other than setting the masks in rvt all drivers were doing this already anyhow. mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for DMA based on their hardweare limits in: __mthca_init_one() dma_set_max_seg_size (1G) __mlx4_init_one() dma_set_max_seg_size (1G) mlx5_pci_init() set_dma_caps() dma_set_max_seg_size (2G) Other non software drivers (except usnic) were extended to UINT_MAX [1, 2] instead of 2G as was before. [1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/ [2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/ Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-29RDMA/i40iw: Remove intermediate pointer that points to the same structLeon Romanovsky1-6/+3
There is no real need to have an intermediate pointer for the same struct, remove it, and use struct directly. Link: https://lore.kernel.org/r/20200926102450.2966017-11-leon@kernel.org Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-23i40iw: Add support to make destroy QP synchronousSindhu, Devale1-9/+22
Occasionally ib_write_bw crash is seen due to access of a pd object in i40iw_sc_qp_destroy after it is freed. Destroy qp is not synchronous in i40iw and thus the iwqp object could be referencing a pd object that is freed by ib core as a result of successful return from i40iw_destroy_qp. Wait in i40iw_destroy_qp till all QP references are released and destroy the QP and its associated resources before returning. Switch to use the refcount API vs atomic API for lifetime management of the qp. RIP: 0010:i40iw_sc_qp_destroy+0x4b/0x120 [i40iw] [...] RSP: 0018:ffffb4a7042e3ba8 EFLAGS: 00010002 RAX: 0000000000000000 RBX: 0000000000000001 RCX: dead000000000122 RDX: ffffb4a7042e3bac RSI: ffff8b7ef9b1e940 RDI: ffff8b7efbf09080 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 8080808080808080 R11: 0000000000000010 R12: ffff8b7efbf08050 R13: 0000000000000001 R14: ffff8b7f15042928 R15: ffff8b7ef9b1e940 FS: 0000000000000000(0000) GS:ffff8b7f2fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000400 CR3: 000000020d60a006 CR4: 00000000001606e0 Call Trace: i40iw_exec_cqp_cmd+0x4d3/0x5c0 [i40iw] ? try_to_wake_up+0x1ea/0x5d0 ? __switch_to_asm+0x40/0x70 i40iw_process_cqp_cmd+0x95/0xa0 [i40iw] i40iw_handle_cqp_op+0x42/0x1a0 [i40iw] ? cm_event_handler+0x13c/0x1f0 [iw_cm] i40iw_rem_ref+0xa0/0xf0 [i40iw] cm_work_handler+0x99c/0xd10 [iw_cm] process_one_work+0x1a1/0x360 worker_thread+0x30/0x380 ? process_one_work+0x360/0x360 kthread+0x10c/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x35/0x40 Fixes: d37498417947 ("i40iw: add files for iwarp interface") Link: https://lore.kernel.org/r/20200916131811.2077-1-shiraz.saleem@intel.com Reported-by: Kamal Heib <kheib@redhat.com> Signed-off-by: Sindhu, Devale <sindhu.devale@intel.com> Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-16RDMA/i40iw: Avoid typecast from void to pci_devParav Pandit1-1/+1
hw_context stores a pci_device pointer. Use the correct type instead of void * and avoid typecasts. Link: https://lore.kernel.org/r/20200914123528.270382-1-parav@mellanox.com Signed-off-by: Parav Pandit <parav@nvidia.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-11RDMA/i40iw: Use ib_umem_num_dma_pages()Jason Gunthorpe1-9/+1
If ib_umem_find_best_pgsz() returns > PAGE_SIZE then the equation here is not correct. 'start' should be 'virt'. Change it to use the core code for page_num and the canonical calculation of page_shift. Fixes: eb52c0333f06 ("RDMA/i40iw: Use core helpers to get aligned DMA address within a supported page size") Link: https://lore.kernel.org/r/8-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA/umem: Add rdma_umem_for_each_dma_block()Jason Gunthorpe1-2/+1
This helper does the same as rdma_for_each_block(), except it works on a umem. This simplifies most of the call sites. Link: https://lore.kernel.org/r/4-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA: Allow fail of destroy CQLeon Romanovsky1-1/+2
Like any other verbs objects, CQ shouldn't fail during destroy, but mlx5_ib didn't follow this contract with mixed IB verbs objects with DEVX. Such mix causes to the situation where FW and kernel are fully interdependent on the reference counting of each side. Kernel verbs and drivers that don't have DEVX flows shouldn't fail. Fixes: e39afe3d6dbd ("RDMA: Convert CQ allocations to be under core responsibility") Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA: Restore ability to fail on PD deallocateLeon Romanovsky1-1/+2
The IB verbs objects are counted by the kernel and ib_core ensures that deallocate PD will success so it will be called once all other objects that depends on PD will be released. This is achieved by managing various reference counters on such objects. The mlx5 driver didn't follow this standard flow when allowed DEVX objects that are not managed by ib_core to be interleaved with the ones under ib_core responsibility. In such interleaved scenarios deallocate command can fail and ib_core will leave uobject in internal DB and attempt to clean it later to free resources anyway. This change partially restores returned value from dealloc_pd() for all drivers, but keeping in mind that non-DEVX devices and kernel verbs paths shouldn't fail. Fixes: 21a428a019c9 ("RDMA: Handle PD allocations by IB/core") Link: https://lore.kernel.org/r/20200907120921.476363-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-3/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-20RDMA/i40iw: Remove the query_pkey callbackKamal Heib1-19/+0
Now that the query_pkey() isn't mandatory by the RDMA core for iwarp providers, this callback can be removed. Link: https://lore.kernel.org/r/20200714183414.61069-7-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-07RDMA: Remove the udata parameter from alloc_mr callbackGal Pressman1-2/+1
Allocating an MR flow can only be initiated by kernel users, and not from userspace so a udata parameter is redundant. Link: https://lore.kernel.org/r/20200706120343.10816-4-galpress@amazon.com Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-03RDMA: Remove 'max_map_per_fmr'Jason Gunthorpe1-1/+0
Now that FMR support is gone, this attribute can be deleted from all places. Link: https://lore.kernel.org/r/13-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-18i40iw: Report correct firmware versionSindhu, Devale1-4/+6
The driver uses a hard-coded value for FW version and reports an inconsistent FW version between ibv_devinfo and /sys/class/infiniband/i40iw/fw_ver. Retrieve the FW version via a Control QP (CQP) operation and report it consistently across sysfs and query device. Fixes: d37498417947 ("i40iw: add files for iwarp interface") Link: https://lore.kernel.org/r/20200313214406.2159-1-shiraz.saleem@intel.com Reported-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Sindhu, Devale <sindhu.devale@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-04RDMA/providers: Fix return value when QP type isn't supportedKamal Heib1-1/+1
The proper return code is "-EOPNOTSUPP" when the requested QP type is not supported by the provider. Link: https://lore.kernel.org/r/20200130082049.463-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-16IB/core: Introduce ib_reg_user_mrMoni Shoua1-0/+3
Add ib_reg_user_mr() for kernel ULPs to register user MRs. The common use case that uses this function is a userspace application that allocates memory for HCA access but the responsibility to register the memory at the HCA is on an kernel ULP. This ULP that acts as an agent for the userspace application. This function is intended to be used without a user context so vendor drivers need to be aware of calling reg_user_mr() device operation with udata equal to NULL. Among all drivers, i40iw is the only driver which relies on presence of udata, so check udata existence for that driver. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-01-16IB: Allow calls to ib_umem_get from kernel ULPsMoni Shoua1-1/+1
So far the assumption was that ib_umem_get() and ib_umem_odp_get() are called from flows that start in UVERBS and therefore has a user context. This assumption restricts flows that are initiated by ULPs and need the service that ib_umem_get() provides. This patch changes ib_umem_get() and ib_umem_odp_get() to get IB device directly by relying on the fact that both UVERBS and ULPs sets that field correctly. Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-01-07i40iw: Remove setting of VMA private data and use rdma_user_mmap_ioShiraz Saleem1-8/+6
vm_ops is now initialized in ib_uverbs_mmap() with the recent rdma mmap API changes. Earlier it was done in rdma_umap_priv_init() which would not be called unless a driver called rdma_user_mmap_io() in its mmap. i40iw does not use the rdma_user_mmap_io API but sets the vma's vm_private_data to a driver object. This now conflicts with the vm_op rdma_umap_close as priv pointer points to the i40iw driver object instead of the private data setup by core when rdma_user_mmap_io is called. This leads to a crash in rdma_umap_close with a mmap put being called when it should not have. Remove the redundant setting of the vma private_data in i40iw as it is not used. Also move i40iw over to use the rdma_user_mmap_io API. This gives the extra protection of having the mappings zapped when the context is detsroyed. BUG: unable to handle page fault for address: 0000000100000001 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 6 PID: 9528 Comm: rping Kdump: loaded Not tainted 5.5.0-rc4+ #117 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014 RIP: 0010:rdma_user_mmap_entry_put+0xa/0x30 [ib_core] RSP: 0018:ffffb340c04c7c38 EFLAGS: 00010202 RAX: 00000000ffffffff RBX: ffff9308e7be2a00 RCX: 000000000000cec0 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000100000001 RBP: ffff9308dc7641f0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: ffffffff8d4414d8 R12: ffff93075182c780 R13: 0000000000000001 R14: ffff93075182d2a8 R15: ffff9308e2ddc840 FS: 0000000000000000(0000) GS:ffff9308fdc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000100000001 CR3: 00000002e0412004 CR4: 00000000001606e0 Call Trace: rdma_umap_close+0x40/0x90 [ib_uverbs] remove_vma+0x43/0x80 exit_mmap+0xfd/0x1b0 mmput+0x6e/0x130 do_exit+0x290/0xcc0 ? get_signal+0x152/0xc40 do_group_exit+0x46/0xc0 get_signal+0x1bd/0xc40 ? prepare_to_wait_event+0x97/0x190 do_signal+0x36/0x630 ? remove_wait_queue+0x60/0x60 ? __audit_syscall_exit+0x1d9/0x290 ? rcu_read_lock_sched_held+0x52/0x90 ? kfree+0x21c/0x2e0 exit_to_usermode_loop+0x4f/0xc3 do_syscall_64+0x1ed/0x270 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fae715a81fd Code: Bad RIP value. RSP: 002b:00007fae6e163cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: fffffffffffffe00 RBX: 00007fae6e163d30 RCX: 00007fae715a81fd RDX: 0000000000000010 RSI: 00007fae6e163cf0 RDI: 0000000000000003 RBP: 00000000013413a0 R08: 00007fae68000000 R09: 0000000000000017 R10: 0000000000000001 R11: 0000000000000293 R12: 00007fae680008c0 R13: 00007fae6e163cf0 R14: 00007fae717c9804 R15: 00007fae6e163ed0 CR2: 0000000100000001 ---[ end trace b33d58d3a06782cb ]--- RIP: 0010:rdma_user_mmap_entry_put+0xa/0x30 [ib_core] Fixes: b86deba977a9 ("RDMA/core: Move core content from ib_uverbs to ib_core") Link: https://lore.kernel.org/r/20200107162223.1745-1-shiraz.saleem@intel.com Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-17IB/umem: remove the dmasync argument to ib_umem_getChristoph Hellwig1-1/+1
The argument is always ignored, so remove it. Link: https://lore.kernel.org/r/20191113073214.9514-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/i40iw: Associate ibdev to netdev before IB device registrationShiraz, Saleem1-0/+4
i40iw IB device registration fails with ENODEV. ib_register_device setup_device/setup_port_data i40iw_port_immutable ib_query_port iw_query_port ib_device_get_netdev(ENODEV) ib_device_get_netdev() does not have a netdev associated with the ibdev and thus fails. Use ib_device_set_netdev() to associate netdev to ibdev in i40iw before IB device registration. Fixes: 4929116bdf72 ("RDMA/core: Add common iWARP query port") Link: https://lore.kernel.org/r/20190925164524.856-1-shiraz.saleem@intel.com Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-12RDMA/{cxgb3, cxgb4, i40iw}: Remove common codeKamal Heib1-11/+0
Now that we have a common iWARP query port function we can remove the common code from the iWARP drivers. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Acked-by: Potnuri Bharat Teja <bharat@chelsio.com> Link: https://lore.kernel.org/r/20190807103138.17219-5-kamalheib1@gmail.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-03RDMA/i40iw: Set queue pair state when being queriedLiu, Changcheng1-0/+2
The API for ib_query_qp requires the driver to set qp_state and cur_qp_state on return, add the missing sets. Fixes: d37498417947 ("i40iw: add files for iwarp interface") Signed-off-by: Changcheng Liu <changcheng.liu@aliyun.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-20RDMA: Check umem pointer validity prior to releaseLeon Romanovsky1-2/+1
Update ib_umem_release() to behave similarly to kfree() and allow submitting NULL pointer as safe input to this function. Fixes: a52c8e2469c3 ("RDMA: Clean destroy CQ in drivers do not return errors") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Convert CQ allocations to be under core responsibilityLeon Romanovsky1-20/+13
Ensure that CQ is allocated and freed by IB/core and not by drivers. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Clean destroy CQ in drivers do not return errorsLeon Romanovsky1-2/+1
Like all other destroy commands, .destroy_cq() call is not supposed to fail. In all flows, the attempt to return earlier caused to memory leaks. This patch converts .destroy_cq() to do not return any errors. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-10RDMA: Move owner into struct ib_device_opsJason Gunthorpe1-1/+1
This more closely follows how other subsytems work, with owner being a member of the structure containing the function pointers. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move uverbs_abi_ver into struct ib_device_opsJason Gunthorpe1-0/+2
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move driver_id into struct ib_device_opsJason Gunthorpe1-1/+2
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21RDMA/i40iw: Remove useless NULL checksLeon Romanovsky1-8/+0
There is no need to check existence of structures to be destroyed. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06RDMA/i40iw: Use core helpers to get aligned DMA address within a supported ↵Shiraz Saleem1-39/+7
page size Call the core helpers to retrieve the HW aligned address to use for the MR, within a supported i40iw page size. Remove code in i40iw to determine when MR is backed by 2M huge pages which involves checking the umem->hugetlb flag and VMA inspection. The new DMA iterator will return the 2M aligned address if the MR is backed by 2M pages. Fixes: f26c7c83395b ("i40iw: Add 2MB page support") Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03RDMA: Get rid of iw_cm_verbsKamal Heib1-20/+10
Integrate iw_cm_verbs data members into ib_device_ops and ib_device structs, this is done to achieve the following: 1) Avoid memory related bugs durring error unwind 2) Make the code more cleaner 3) Reduce code duplication Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01IB: Pass only ib_udata in function prototypesShamir Rabinovitch1-12/+8
Now when ib_udata is passed to all the driver's object create/destroy APIs the ib_udata will carry the ib_ucontext for every user command. There is no need to also pass the ib_ucontext via the functions prototypes. Make ib_udata the only argument psssed. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01IB: Remove 'uobject->context' dependency in object destroy APIsShamir Rabinovitch1-2/+5
Now that we have the udata passed to all the ib_xxx object destroy APIs and the additional macro 'rdma_udata_to_drv_context' to get the ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally start to remove the dependency of the drivers in the ib_xxx->uobject->context. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01IB: Pass uverbs_attr_bundle down ib_x destroy pathShamir Rabinovitch1-9/+11
The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x destroy path as ib_udata. The next patch will use the ib_udata to free the drivers destroy path from the dependency in 'uobject->context' as we already did for the create path. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-23RDMA: Handle ucontext allocations by IB/coreLeon Romanovsky1-36/+14
Following the PD conversion patch, do the same for ucontext allocations. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-16IB/{hw,sw}: Remove 'uobject->context' dependency in object creation APIsShamir Rabinovitch1-4/+5
Now when we have the udata passed to all the ib_xxx object creation APIs and the additional macro 'rdma_udata_to_drv_context' to get the ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally start to remove the dependency of the drivers in the ib_xxx->uobject->context. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-12RDMA/i40iw: Use for_each_sg_dma_page iterator on umem SGLShiraz, Saleem1-19/+16
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped SGL and get the page DMA address. This avoids the extra loop to iterate pages in the SGE when for_each_sg iterator is used. Additionally, purge umem->page_shift usage in the driver as its only relevant for ODP MRs. Use system page size and shift instead. Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-09RDMA: Handle PD allocations by IB/coreLeon Romanovsky1-20/+12
The PD allocations in IB/core allows us to simplify drivers and their error flows in their .alloc_pd() paths. The changes in .alloc_pd() go hand in had with relevant update in .dealloc_pd(). We will use this opportunity and convert .dealloc_pd() to don't fail, as it was suggested a long time ago, failures are not happening as we have never seen a WARN_ON print. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-06 14:07:18 +0300