summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
AgeCommit message (Collapse)AuthorFilesLines
2016-03-03IB/ocrdma: Skip using unneeded intermediate variableMarkus Elfring1-2/+1
Return zero at the end without using the local variable "status". Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-03IB/ocrdma: Delete unnecessary variable initialisations in 11 functionsMarkus Elfring1-2/+2
The variable "status" will be set to an appropriate value a bit later. Thus let us omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01RDMA/ocrdma: Support RoCE-v2 in the RC pathDevesh Sharma1-2/+21
This patch implements following changes to support RoCE-v2 in the RC path: * Get the GID-type for a given sgid. * Based on the GID-type get IPv4/IPv6 L3-address and give those to underlying device. * Resolve and provide network header type to device. Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01RDMA/ocrdma: Export udp encapsulation capabilitySomnath Kotur1-0/+3
Add support to read device configuration and initialize port-immutables to report UDP-Encap flag during port query. Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-28RDMA/ocrdma: Depend on async link events from CNADevesh Sharma1-7/+35
Recently Dough Ledford reported a deadlock happening between ocrdma-load sequence and NetworkManager service issuing "open" on be2net interface. The deadlock happens when any be2net hook (e.g. open/close) is called in parallel to insmod ocrdma.ko. A. be2net is sending administrative open/close event to ocrdma holding device_list_mutex. It does this from ndo_open/ndo_stop hooks of be2net. So sequence of locks is rtnl_lock---> device_list lock B. When new ocrdma roce device gets registered, infiniband stack now takes rtnl_lock in ib_register_device() in GID initialization routines. So sequence of locks in this path is device_list lock ---> rtnl_lock. This improper locking sequence causes deadlock. With this patch we stop using administrative open and close events injected by be2net driver. These events were used to dispatch PORT_ACTIVE and PORT_ERROR events to the IB-stack. This patch implements a logic to receive async-link-events generated from CNA whenever link-state-change is detected. Now on, these async-events will be used to dispatch PORT_ACTIVE and PORT_ERROR events to IB-stack. Depending on async-events from CNA removes the need to hold device-list-mutex and thus breaks the busy-wait scenario. Reported-by: Doug Ledford <dledford@redhat.com> CC: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-28RDMA/ocrdma: Fix vlan-id assignment in qp parametersDevesh Sharma1-3/+4
vlan-id is wrongly getting as 0 when PFC is enabled. Set vlan-id configured by user in QP parameters. In case vlan interface is not used, flash a warning to user to configure vlan and assign vlan-id as 0 in qp params. Fixes: dbf727de7440 ('IB/core: Use GID table in AH creation and dmac resolution') Cc: Matan Barak <matanb@mellanox.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-22IB/core: Use GID table in AH creation and dmac resolutionMatan Barak1-13/+17
Previously, vlan id and source MAC were used from QP attributes. Since the net device is now stored in the GID attributes, they could be used instead of getting this information from the QP attributes. IB_QP_SMAC, IB_QP_ALT_SMAC, IB_QP_VID and IB_QP_ALT_VID were removed because there is no known libibverbs that uses them. This commit also modifies the vendors (mlx4, ocrdma) drivers in order to use the new approach. ocrdma driver changes were done by Somnath Kotur <Somnath.Kotur@Avagotech.Com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-22RDMA/ocrdma: Check resource ids received in Async CQENaga Irrinki1-4/+26
Some versions of the FW sends wrong QP or CQ IDs in the Async CQE. Adding a check to see whether qp or cq structures associated with the CQE is valid. Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-24RDMA/ocrdma: update ocrdma license to dual-licenseDevesh Sharma1-19/+34
Change of license from GPLv2 to dual-license (GPLv2 and BSD 2-Clause) All contributors were contacted off-list and permission to make this change was received. The complete list of contributors are Cc:ed here. Cc: Tejun Heo <tj@kernel.org> Cc: Duan Jiong <duanj.fnst@cn.fujitsu.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Jes Sorensen <Jes.Sorensen@redhat.com> Cc: Sasha Levin <levinsasha928@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Moni Shoua <monis@mellanox.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Li RongQing <roy.qing.li@gmail.com> Cc: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fail connection for MTU lesser than 512Naga Irrinki1-1/+3
HW currently restricts the IB MTU range between 512 and 4096. Fail connection for MTUs lesser than 512. Signed-off-by: Naga Irrinki <naga.irrinki@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Prevent allocation of DPP PDs if FW doesnt support itMitesh Ahuja1-27/+26
If DPP PDs are not supported by the FW, allocate only normal PDs. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@avagotech.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fix the request length for RDMA_QUERY_QP mailbox command to FW.Mitesh Ahuja1-1/+1
Fix ocrdma_query_qp to pass correct mailbox request length to FW. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Use VID 0 if PFC is enabled and vlan is not configuredDevesh Sharma1-1/+11
If the adapter ports are in PFC mode and VLAN is not configured, use vlan tag 0 for RoCE traffic. Also, log an advisory message in system logs. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Report EQ full fatal errorDevesh Sharma1-0/+6
Detect when Event Queue (EQ) becomes full and print a warning message. Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fix EQ destroy failure during driver unloadSelvin Xavier1-3/+3
Changing the destroy sequence of mailbox queue and event queues. FW expects mailbox queue to be destroyed before desroying the EQs. Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-02-18RDMA/ocrdma: remove reference of ocrdma_dev out of ocrdma_qp structureMitesh Ahuja1-19/+25
Use get_ocrdma_dev(ocrdma_qp->ibqp.device) function to access ocrdma device pointer. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Add support for interrupt moderationMitesh Ahuja1-0/+77
Add support for interrupt moderation for ocrdma device. Thresholds for high interrupt rates are static values derived based on experimental results. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Honor return value of ocrdma_resolve_dmacDevesh Sharma1-1/+3
Check for return value for ocrdma_resolve_dmac while setting AV params. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Allow expansion of the SQ CQEs via buddy CQ expansion of the QPSelvin Xavier1-22/+44
If the SQ and RQ of the QP in error state uses separate CQs, traverse the list of QPs using each CQs and invoke the buddy CQ handler for both SQ and RQ. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Debugfs enhancments for ocrdma driverSelvin Xavier1-0/+3
1. Add statistics counters for error cqes. 2. Add file ("reset_stats") to reset rdma stats in Debugfs. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Move PD resource management to driver.Mitesh Ahuja1-0/+120
Move PD allocation and deallocation from firmware to driver. At driver load time all the PDs will be requested from firmware and their management will be handled by driver to reduce mailbox commands overhead at runtime. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-10RDMA/ocrdma: The kernel has a perfectly good BIT() macro - use itJes Sorensen1-2/+2
No need to re-invent the wheel here Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-10RDMA/ocrdma: Don't memset() buffers we just allocated with kzalloc()Jes Sorensen1-9/+3
Get rid of obfuscating ocrdma_alloc_mqe() kzalloc() wrapper as all it did was to make it less visible that the structure was already cleared on allocation. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-10RDMA/ocrdma: Get vlan tag from ib_qp_attrsSelvin Xavier1-4/+5
After IP-based GID changes, VLAN id can be obtained from qp_attr->vlan_id. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-13RDMA/ocrdma: Update sli data structure for endiannessDevesh Sharma1-11/+21
Update the sli specific mailbox command request/response data sturcures to fix endianness issues. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-13RDMA/ocrdma: Obtain SL from device structureDevesh Sharma1-3/+1
Currently, driver obtains service level value from ah_attr->sl field. However, this field is set to zero all the times from rdma-cm. This patch allows create_ah to obtain service level from dev->sl. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-02RDMA/ocrdma: Fix a sparse warningSelvin Xavier1-1/+3
Fix the warning about the usage of plain integer as NULL pointer. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-02RDMA/ocrdma: Return proper value for max_mr_sizeMitesh Ahuja1-1/+2
Update the max_mr_size with proper value. Corrected the response structure of query config mailbox command. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.Com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-02RDMA/ocrdma: Do proper cleanup even if FW is in error stateMitesh Ahuja1-1/+7
If any mailbox command reports timeout, save the state in the driver, to prevent issuing any more commands to the HW. Do proper cleanup even if FW is in error state. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.Com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-02RDMA/ocrdma: Delete AH table if ocrdma_init_hw fails after AH table creationDevesh Sharma1-2/+5
Cleanup the AH table in error path, if HW initialization fails after AH table creation. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-02RDMA/ocrdma: Query and initalize the PFC SLSelvin Xavier1-0/+172
This patch implements routine to query the PFC priority from the adapter port. Following are the changes implemented: * A new FW command is implemented to query the operational/admin DCBX configuration from the FW and obtain active priority(service level). * Adds support for the async event reported by FW when the PFC priority changes. Service level is re-initialized during modify_qp or create_ah, based on this event. * Maintain SL value in ocrdma_dev structure and refer that as and when needed. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-02RDMA/ocrdma: Avoid posting DPP requests for RDMA READDevesh Sharma1-1/+2
Rollback the patch which allows DPP posting of RDMA READ since this path is not yet stable in FW. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Code clean-upDevesh Sharma1-12/+8
Clean up code. Also modifying GSI QP to error during ocrdma_close is fixed. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Query controller informationSelvin Xavier1-0/+148
Issue mailbox commands to query ocrdma controller information and phy information and print them while adding ocrdma device. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Support non-embedded mailbox commandsSelvin Xavier1-8/+47
Added a routine to issue non-embedded mailbox commands for handling large mailbox request/response data. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Handle CQ overrun errorSelvin Xavier1-1/+4
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Display proper value for max_mwSelvin Xavier1-0/+1
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Allow DPP QP creationDevesh Sharma1-2/+1
Allow creating DPP QP even if inline-data is not requested. This is an optimization to lower latency. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Read ASIC_ID register to select asic_genDevesh Sharma1-3/+3
ocrdma driver selects execution path based on sli_family and asic generation number. This introduces code to read the asic gen number from pci register instead of obtaining it from the Emulex NIC driver. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: EQ full catastrophe avoidanceDevesh Sharma1-28/+25
Stale entries in the CQ being destroyed causes hardware to generate EQEs indefinitely for a given CQ. Thus causing uncontrolled execution of irq_handler. This patch fixes this using following sementics: * irq_handler will ring EQ doorbell atleast once and implement budgeting scheme. * cq_destroy will count number of valid entires during destroy and ring cq-db so that hardware does not generate uncontrolled EQE. * cq_destroy will synchronize with last running irq_handler instance. * arm_cq will always defer arming CQ till poll_cq, except for the first arm_cq call. * poll_cq will always ring cq-db with arm=SET if arm_cq was called prior to enter poll_cq. * poll_cq will always ring cq-db with arm=UNSET if arm_cq was not called prior to enter poll_cq. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-18RDMA/ocrdma: Fix compiler warningPrarit Bhargava1-5/+3
drivers/infiniband/hw/ocrdma/ocrdma_verbs.c: In function ‘_ocrdma_modify_qp’: drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:1299:31: error: ‘old_qps’ may be used uninitialized in this function [-Werror=maybe-uninitialized] status = ocrdma_mbx_modify_qp(dev, qp, attr, attr_mask, old_qps); ocrdma_mbx_modify_qp() (and subsequent calls) doesn't appear to use old_qps so it doesn't need to be passed on. Removing the variable results in the warning going away. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Devesh Sharma (Devesh.sharma@emulex.com) Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-20RDMA/ocrdma: Handle Ethernet L2 parameters for IP based GID addressingMoni Shoua1-19/+2
This patch is similar in spirit to the "IB/mlx4: Handle Ethernet L2 parameters for IP based GID addressing". It handles the fact that IP based RoCE gids don't store Ethernet L2 parameters, MAC and VLAN. When building an address handle, instead of parsing the dgid to get the MAC and VLAN, take them from the address handle attributes. Cc: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-09RDMA/ocrdma: Silence an integer underflow warningDan Carpenter1-1/+1
We recently added a cap on "max_wqe_allocated" in 43a6b4025c ('RDMA/ocrdma: Create IRD queue fix'). My static checker complains that the cap has a problem because it casts large values to negative. "attrs->cap.max_send_wr" is a u32. It comes from the user, but it's capped in ocrdma_check_qp_params() so it can't wrap here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-14IB: Remove unnecessary semicolonsJoe Perches1-3/+3
These aren't necessary after switch blocks. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-03RDMA/ocrdma: Fix passing wrong opcode to modify_srqNaresh Gottumukkala1-2/+2
Fix passing wrong opcode to ocrdma_modify_srq and query SRQ. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-03RDMA/ocrdma: Fill PVID in UMC caseNaresh Gottumukkala1-2/+30
In UMC case, driver needs to fill PVID in the address vector template for UD traffic. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-03RDMA/ocrdma: Fix for displaying proper link speedNaresh Gottumukkala1-0/+28
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-03RDMA/ocrdma: Increase STAG array sizeNaresh Gottumukkala1-1/+3
1) Increase STAG Array size. 2) Max inline data size should be set to the same value used during QP creation 3) Set max_sge_rd to zero since we dont support RD transport in our adapters. 4) Max cqes reported in ibv_devinfo should be from QUERY_CONFIG. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-03RDMA/ocrdma: Dont use PD 0 for userpace CQ DBNaresh Gottumukkala1-2/+3
Create_CQ verb doesn't provide a PD pointer. So, until now we are creating all (both userspace and kernel) CQ DB regions from PD0. This will result in mmapping PD0 to applications. A rogue userspace application can mess things up. Also more serious issues is even the be2net NIC uses PD0. This patch addresses this problem by: 1) Create a PD page for every userspace application when the alloc_ucontext is called. This will be destroyed in dealloc_ucontext. 2) All CQs for that context will use the PD allocated in ucontext. 3) The first create_PD call from application will result in returning the PD address from its ucontext (no new PD will be created). 4) For subsecquent create_pd calls from application, we create new PDs for the application. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-03RDMA/ocrdma: FRMA code cleanupNaresh Gottumukkala1-0/+2
1) Fixed setting FR_MR bit for FRWR stag allocation 2) Access rights are passsed during FRWR stage and not during STAT allocation stage 3) FRWR WQE structure cleanup 4) Add QP level signaled bit. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-23 11:37:16 +0300