Age | Commit message (Collapse) | Author | Files | Lines |
|
Fix 'rmda' into 'RDMA'.
Link: https://patch.msgid.link/r/20240822065223.1117056-3-pizhenwei@bytedance.com
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Use 'sizeof(union rdma_network_hdr)' instead of hard code GRH length
for GSI and UD.
Link: https://patch.msgid.link/r/20240822065223.1117056-2-pizhenwei@bytedance.com
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
According to the IBA specification:
If a UD request packet is detected with an invalid length, the request
shall be an invalid request and it shall be silently dropped by
the responder. The responder then waits for a new request packet.
commit 689c5421bfe0 ("RDMA/rxe: Fix incorrect responder length checking")
defers responder length check for UD QPs in function `copy_data`.
But it introduces a regression issue for UD QPs.
When the packet size is too large to fit in the receive buffer.
`copy_data` will return error code -EINVAL. Then `send_data_in`
will return RESPST_ERR_MALFORMED_WQE. UD QP will transfer into
ERROR state.
Fixes: 689c5421bfe0 ("RDMA/rxe: Fix incorrect responder length checking")
Signed-off-by: Honggang LI <honggangli@163.com>
Link: https://lore.kernel.org/r/20240523094617.141148-1-honggangli@163.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Replace calls to rxe_run_task() with rxe_sched_task(). This prevents the
tasks from all running on the same cpu.
This change slightly reduces performance for single qp send and write
benchmarks in loopback mode but greatly improves the performance with
multiple qps because if run task is used all the work tends to be
performed on one cpu. For actual on the wire benchmarks there is no
noticeable performance change.
Link: https://lore.kernel.org/r/20240329145513.35381-11-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently the rxe driver has three work queue tasks per qp. These are the
req.task, comp.task and resp.task which call rxe_requester(),
rxe_completer() and rxe_responder() respectively directly or on work
queues. Each of these subroutines checks to see if there is work to be
performed on the send queue or on the response packet queue or the request
packet queue and will run until there is no work remaining or yield the
cpu and reschedule itself until there is no work remaining.
This commit combines the req.task and comp.task into a single send.task
and renames the resp.task to the recv.task. The combined send.task calls
rxe_requester() and rxe_completer() serially and continues until all work
on both the send queue and the response packet queue are done.
In various benchmarks the performance is either improved or left the
same. At high scale there is a significant reduction in the load on the
cpu.
This is the first step in combining these two tasks. Once they are
serialized cross rescheduling of req.task and comp.task can be more
efficiently handled by just letting the send.task continue to run. This
will be done in the next several patches.
Link: https://lore.kernel.org/r/20240329145513.35381-7-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Previously rxe_{dbg,info,err}() macros are appended built-in newline,
but some users will add redundant newline sometimes. So remove the
built-in newline for these macros.
In terms of rxe_{dbg,info,err}_xxx() macros, because they don't have
built-in newline, append newline when using them.
CC: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240109083253.3629967-1-lizhijian@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
If create_qp does not fully succeed it is possible for qp cleanup
code to attempt to drain the send or recv work queues before the
queues have been created causing a seg fault. This patch checks
to see if the queues exist before attempting to drain them.
Link: https://lore.kernel.org/r/20230620135519.9365-3-rpearsonhpe@gmail.com
Reported-by: syzbot+2da1965168e7dbcba136@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-rdma/00000000000012d89205fe7cfe00@google.com/raw
Fixes: 49dc9c1f0c7e ("RDMA/rxe: Cleanup reset state handling in rxe_resp.c")
Fixes: fbdeb828a21f ("RDMA/rxe: Cleanup error state handling in rxe_comp.c")
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Linux 6.4
Resolve conflicts between rdma rc and next in rxe_cq matching linux-next:
drivers/infiniband/sw/rxe/rxe_cq.c:
https://lore.kernel.org/r/20230622115246.365d30ad@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The IBA requires:
o11-5.2.5: If the HCA supports SRQ, for RC and UD service,
the CI shall generate a Last WQE Reached Affiliated Asynchronous
Event on a QP that is in the Error State and is associated with
an SRQ when either:
• a CQE is generated for the last WQE, or
• the QP gets in the Error State and there are no more
WQEs on the RQ.
This patch implements this behavior in flush_recv_queue() which is called
as a result of rxe_qp_error() being called whenever the qp is put into the
error state. The rxe responder executes SRQ WQEs directly from the SRQ so
there are never more WQES on the RQ.
Link: https://lore.kernel.org/r/20230602164229.9277-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Bypass calling check_rkey() in rxe_resp.c for non-rdma messages.
Link: https://lore.kernel.org/r/20230530221334.89432-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is a reference count error in error path code and a potential race
in check_rkey() in rxe_resp.c. When looking up the rkey for a memory
window the reference to the mw from rxe_lookup_mw() is dropped before a
reference is taken on the mr referenced by the mw. If the mr is destroyed
immediately after the call to rxe_put(mw) the mr pointer is unprotected
and may end up pointing at freed memory. The rxe_get(mr) call should take
place before the rxe_put(mw) call.
All errors in check_rkey() call rxe_put(mw) if mw is not NULL but it was
already called after the above. The mw pointer should be set to NULL after
the rxe_put(mw) call to prevent this from happening.
Fixes: cdd0b85675ae ("RDMA/rxe: Implement memory access through MWs")
Link: https://lore.kernel.org/r/20230517211509.1819998-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The commit 9b4b7c1f9f54 ("RDMA/rxe: Add workqueue support for rxe tasks")
removed tasklets and replaced them with a workqueue, but relevant comments
are still remaining in the source code.
Fixes: 9b4b7c1f9f54 ("RDMA/rxe: Add workqueue support for rxe tasks")
Link: https://lore.kernel.org/r/20230518070027.942715-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
spin_{lock_irqsave,unlock_irqrestore}
We need to call spin_lock_irqsave()/spin_unlock_irqrestore() for
state_lock in rxe, otherwsie the callchain:
ib_post_send_mad
-> spin_lock_irqsave
-> ib_post_send -> rxe_post_send
-> spin_lock_bh
-> spin_unlock_bh
-> spin_unlock_irqrestore
Causes below traces during run block nvmeof-mp/001 test due to mismatched
spinlock nesting:
WARNING: CPU: 0 PID: 94794 at kernel/softirq.c:376 __local_bh_enable_ip+0xc2/0x140
[ ... ]
CPU: 0 PID: 94794 Comm: kworker/u4:1 Tainted: G E 6.4.0-rc1 #9
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
Workqueue: rdma_cm cma_work_handler [rdma_cm]
RIP: 0010:__local_bh_enable_ip+0xc2/0x140
Code: 48 85 c0 74 72 5b 41 5c 5d 31 c0 89 c2 89 c1 89 c6 89 c7 41 89 c0 e9 bd 0e 11 01 65 8b 05 f2 65 72 48 85 c0 0f 85 76 ff ff ff <0f> 0b e9 6f ff ff ff e8 d2 39 1c 00 eb 80 4c 89 e7 e8 68 ad 0a 00
RSP: 0018:ffffb7cf818539f0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000201 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000201 RDI: ffffffffc0f25f79
RBP: ffffb7cf81853a00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffc0f25f79
R13: ffff8db1f0fa6000 R14: ffff8db2c63ff000 R15: 00000000000000e8
FS: 0000000000000000(0000) GS:ffff8db33bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000559758db0f20 CR3: 0000000105124000 CR4: 00000000003506f0
Call Trace:
<TASK>
_raw_spin_unlock_bh+0x31/0x40
rxe_post_send+0x59/0x8b0 [rdma_rxe]
ib_send_mad+0x26b/0x470 [ib_core]
ib_post_send_mad+0x150/0xb40 [ib_core]
? cm_form_tid+0x5b/0x90 [ib_cm]
ib_send_cm_req+0x7c8/0xb70 [ib_cm]
rdma_connect_locked+0x433/0x940 [rdma_cm]
nvme_rdma_cm_handler+0x5d7/0x9c0 [nvme_rdma]
cma_cm_event_handler+0x4f/0x170 [rdma_cm]
cma_work_handler+0x6a/0xe0 [rdma_cm]
process_one_work+0x2a9/0x580
worker_thread+0x52/0x3f0
? __pfx_worker_thread+0x10/0x10
kthread+0x109/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 0 PID: 94794 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x37/0x60
[ ... ]
CPU: 0 PID: 94794 Comm: kworker/u4:1 Tainted: G W E 6.4.0-rc1 #9
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
Workqueue: rdma_cm cma_work_handler [rdma_cm]
RIP: 0010:warn_bogus_irq_restore+0x37/0x60
Code: fb 01 77 36 83 e3 01 74 0e 48 8b 5d f8 c9 31 f6 89 f7 e9 ac ea 01 00 48 c7 c7 e0 52 33 b9 c6 05 bb 1c 69 01 01 e8 39 24 f0 fe <0f> 0b 48 8b 5d f8 c9 31 f6 89 f7 e9 89 ea 01 00 0f b6 f3 48 c7 c7
RSP: 0018:ffffb7cf81853a58 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffb7cf81853a60 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8db2cfb1a9e8
R13: ffff8db2cfb1a9d8 R14: ffff8db2c63ff000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8db33bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000559758db0f20 CR3: 0000000105124000 CR4: 00000000003506f0
Call Trace:
<TASK>
_raw_spin_unlock_irqrestore+0x91/0xa0
ib_send_mad+0x1e3/0x470 [ib_core]
ib_post_send_mad+0x150/0xb40 [ib_core]
? cm_form_tid+0x5b/0x90 [ib_cm]
ib_send_cm_req+0x7c8/0xb70 [ib_cm]
rdma_connect_locked+0x433/0x940 [rdma_cm]
nvme_rdma_cm_handler+0x5d7/0x9c0 [nvme_rdma]
cma_cm_event_handler+0x4f/0x170 [rdma_cm]
cma_work_handler+0x6a/0xe0 [rdma_cm]
process_one_work+0x2a9/0x580
worker_thread+0x52/0x3f0
? __pfx_worker_thread+0x10/0x10
kthread+0x109/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
Fixes: f605f26ea196 ("RDMA/rxe: Protect QP state with qp->state_lock")
Link: https://lore.kernel.org/r/20230510035056.881196-1-guoqing.jiang@linux.dev
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently the rxe driver makes little effort to make the changes to qp
state (which includes qp->attr.qp_state, qp->attr.sq_draining and
qp->valid) atomic between different client threads and IO threads. In
particular a common template is for an RDMA application to call
ib_modify_qp() to move a qp to ERR state and then wait until all the
packet and work queues have drained before calling ib_destroy_qp(). None
of these state changes are protected by locks to assure that the changes
are executed atomically and that memory barriers are included. This has
been observed to lead to incorrect behavior around qp cleanup.
This patch continues the work of the previous patches in this series and
adds locking code around qp state changes and lookups.
Link: https://lore.kernel.org/r/20230405042611.6467-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The rxe driver has four different QP state variables,
qp->attr.qp_state,
qp->req.state,
qp->comp.state, and
qp->resp.state.
All of these basically carry the same information.
This patch replaces uses of qp->resp.state by qp->attr.qp_state. This is
the first of three patches which will remove all but the qp->attr.qp_state
variable. This will bring the driver closer to the IBA description.
Link: https://lore.kernel.org/r/20230405042611.6467-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently each of the three tasklets requester, completer and responder in
the rxe driver take and release a reference to the qp argument at the
beginning and end of the subroutines. The caller passing in the qp
argument should be responsible for holding a reference to qp so these are
not required. Further doing so breaks the qp cleanup code in
rxe_qp_do_cleanup which calls these routines after all the references have
been dropped so they cannot drain the packet and work request queues as
intended.
In fact if these routines are deferred by calling tasklet_schedule there
is no guarantee that the calling code does have a qp reference. That is a
bug in rxe_task.c which will be fixed later in this series.
Link: https://lore.kernel.org/r/20230304174533.11296-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Cleanup the handling of qp in the error state, reset state and during
rxe_qp_do_cleanup. Make the same as rxe_resp.c
Link: https://lore.kernel.org/r/20230304174533.11296-5-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Cleanup the handling of qp in the error state, reset state and during
rxe_qp_do_cleanup. The error state does about the same thing as the others
but has code spread all over.
This patch combines them in a cleaner way.
Link: https://lore.kernel.org/r/20230304174533.11296-4-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Originally is was thought that the tasklet machinery in rxe_task.c would
be used in other applications but that has not happened for years. This
patch replaces the 'void *arg' by struct 'rxe_qp *qp' in the parameters to
the tasklet calls. This change will have no affect on performance but may
make the code a little clearer.
Link: https://lore.kernel.org/r/20230304174533.11296-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This patch adds error and debug messages so that every interaction
with rdma-core through a verbs API call or a completion error return
will generate at least one error message backed up by debug messages
with more detail.
With dynamic debugging one can follow up after seeing an error message
by turning on the appropriate debug messages.
Link: https://lore.kernel.org/r/20230303221623.8053-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently the rxe driver does not handle all cases of zero length rdma
operations correctly. The client does not have to provide an rkey for zero
length RDMA read or write operations so the rkey provided may be invalid
and should not be used to lookup an mr.
This patch corrects the driver to ignore the provided rkey if the reth
length is zero for read or write operations and make sure to set the mr to
NULL. In read_reply() if length is zero rxe_recheck_mr() is not
called. Warnings are added in the routines in rxe_mr.c to catch NULL MRs
when the length is non-zero.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20230202044240.6304-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Isolate mr specific code from atomic_write_reply() in rxe_resp.c into
a subroutine rxe_mr_do_atomic_write() in rxe_mr.c.
Check length for atomic write operation.
Make iova_to_vaddr() static.
Link: https://lore.kernel.org/r/20230119235936.19728-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Isolate mr specific code from atomic_reply() in rxe_resp.c into
a subroutine rxe_mr_do_atomic_op() in rxe_mr.c.
Minor cleanups to rxe_check_range() and iova_to_vaddr().
Move enum resp_state to rxe.h
Link: https://lore.kernel.org/r/20230119235936.19728-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Move the conditional code into a function, with two varients so it is
harder to make these kinds of mistakes.
drivers/infiniband/sw/rxe/rxe_resp.c: In function 'atomic_write_reply':
drivers/infiniband/sw/rxe/rxe_resp.c:794:13: error: unused variable 'payload' [-Werror=unused-variable]
794 | int payload = payload_size(pkt);
| ^~~~~~~
drivers/infiniband/sw/rxe/rxe_resp.c:793:24: error: unused variable 'mr' [-Werror=unused-variable]
793 | struct rxe_mr *mr = qp->resp.mr;
| ^~
drivers/infiniband/sw/rxe/rxe_resp.c:791:19: error: unused variable 'dst' [-Werror=unused-variable]
791 | u64 src, *dst;
| ^~~
drivers/infiniband/sw/rxe/rxe_resp.c:791:13: error: unused variable 'src' [-Werror=unused-variable]
791 | u64 src, *dst;
Fixes: 034e285f8b99 ("RDMA/rxe: Make responder support atomic write on RC service")
Link: https://lore.kernel.org/linux-rdma/Y5s+EVE7eLWQqOwv@nvidia.com/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Only the requested placement types that also registered in the destination
memory region are acceptable.
Otherwise, responder will also reply NAK "Remote Access Error" if it
found a placement type violation.
We will persist data via arch_wb_cache_pmem(), which could be
architecture specific.
This commit also adds 2 helpers to update qp.resp from the incoming packet.
Link: https://lore.kernel.org/r/20221206130201.30986-8-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The code in rxe_resp.c at check_length() is incorrect as it compares
pkt->opcode an 8 bit value against various mask bits which are all higher
than 256 so nothing is ever reported.
This patch rewrites this to compare against pkt->mask which is
correct. However this now exposes another error. For UD send packets the
value of the pmtu cannot be determined from qp->mtu. All that is required
here is to later check if the payload fits into the posted receive buffer
in that case.
Fixes: 837a55847ead ("RDMA/rxe: Implement packet length validation on responder")
Link: https://lore.kernel.org/r/20221208210945.28607-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The commit 686d348476ee ("RDMA/rxe: Remove unnecessary mr testing") causes
a kernel crash. If responder get a zero-byte RDMA Read request,
qp->resp.mr is not set in check_rkey() (see IBA C9-88). The mr is NULL in
this case, and a NULL pointer dereference occurs as shown below.
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 2 PID: 3622 Comm: python3 Kdump: loaded Not tainted 6.1.0-rc3+ #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:__rxe_put+0xc/0x60 [rdma_rxe]
Code: cc cc cc 31 f6 e8 64 36 1b d3 41 b8 01 00 00 00 44 89 c0 c3 cc cc cc cc 41 89 c0 eb c1 90 0f 1f 44 00 00 41 54 b8 ff ff ff ff <f0> 0f c1 47 10 83 f8 01 74 11 45 31 e4 85 c0 7e 20 44 89 e0 41 5c
RSP: 0018:ffffb27bc012ce78 EFLAGS: 00010246
RAX: 00000000ffffffff RBX: ffff9790857b0580 RCX: 0000000000000000
RDX: ffff979080fe145a RSI: 000055560e3e0000 RDI: 0000000000000000
RBP: ffff97909c7dd800 R08: 0000000000000001 R09: e7ce43d97f7bed0f
R10: ffff97908b29c300 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: ffff97908b29c300 R15: 0000000000000000
FS: 00007f276f7bd740(0000) GS:ffff9792b5c80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 0000000114230002 CR4: 0000000000060ee0
Call Trace:
<IRQ>
read_reply+0xda/0x310 [rdma_rxe]
rxe_responder+0x82d/0xe50 [rdma_rxe]
do_task+0x84/0x170 [rdma_rxe]
tasklet_action_common.constprop.0+0xa7/0x120
__do_softirq+0xcb/0x2ac
do_softirq+0x63/0x90
</IRQ>
Support a NULL mr during read_reply()
Fixes: 686d348476ee ("RDMA/rxe: Remove unnecessary mr testing")
Fixes: b5f9a01fae42 ("RDMA/rxe: Fix mr leak in RESPST_ERR_RNR")
Link: https://lore.kernel.org/r/20221209045926.531689-1-matsuda-daisuke@fujitsu.com
Link: https://lore.kernel.org/r/20221202145713.13152-1-lizhijian@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
For dependencies in following patches
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Make responder process an atomic write request and send a read response
on RC service.
Link: https://lore.kernel.org/r/1669905568-62-2-git-send-email-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace calls to pr_xxx() in rxe_resp.c with rxe_dbg_xxx().
Link: https://lore.kernel.org/r/20221103171013.20659-10-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The function check_length() is supposed to check the length of inbound
packets on responder, but it actually has been a stub since the driver was
born. Let it check the payload length and the DMA length.
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://lore.kernel.org/r/20221107055338.357184-1-matsuda-daisuke@fujitsu.com
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Split rxe_run_task(task, sched) into rxe_run_task(task) and
rxe_sched_task(task).
Link: https://lore.kernel.org/r/20221021200118.2163-5-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
rxe_recheck_mr() will increase mr's ref_cnt, so we should call rxe_put(mr)
to drop mr's ref_cnt in RESPST_ERR_RNR to avoid below warning:
WARNING: CPU: 0 PID: 4156 at drivers/infiniband/sw/rxe/rxe_pool.c:259 __rxe_cleanup+0x1df/0x240 [rdma_rxe]
...
Call Trace:
rxe_dereg_mr+0x4c/0x60 [rdma_rxe]
ib_dereg_mr_user+0xa8/0x200 [ib_core]
ib_mr_pool_destroy+0x77/0xb0 [ib_core]
nvme_rdma_destroy_queue_ib+0x89/0x240 [nvme_rdma]
nvme_rdma_free_queue+0x40/0x50 [nvme_rdma]
nvme_rdma_teardown_io_queues.part.0+0xc3/0x120 [nvme_rdma]
nvme_rdma_error_recovery_work+0x4d/0xf0 [nvme_rdma]
process_one_work+0x582/0xa40
? pwq_dec_nr_in_flight+0x100/0x100
? rwlock_bug.part.0+0x60/0x60
worker_thread+0x2a9/0x700
? process_one_work+0xa40/0xa40
kthread+0x168/0x1a0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
Link: https://lore.kernel.org/r/20221024052049.20577-1-lizhijian@fujitsu.com
Fixes: 8a1a0be894da ("RDMA/rxe: Replace mr by rkey in responder resources")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Before the testing, we already passed it to rxe_mr_copy() where mr could
be dereferenced. so this checking is not needed.
The only way that mr is NULL is when it reaches below line 780 with
'qp->resp.mr = NULL', which is not possible in Bob's explanation[1].
778 if (res->state == rdatm_res_state_new) {
779 if (!res->replay) {
780 mr = qp->resp.mr;
781 qp->resp.mr = NULL;
782 } else {
[1] https://lore.kernel.org/lkml/30ff25c4-ce66-eac4-eaa2-64c0db203a19@gmail.com/
Link: https://lore.kernel.org/r/1666582315-2-1-git-send-email-lizhijian@fujitsu.com
CC: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Currently, responder can reply packets with invalid payloads if it fails
to copy messages to the packets. Add an error handling in read_reply() to
inform a requesting node of the failure.
Link: https://lore.kernel.org/r/20221013014724.3786212-1-matsuda-daisuke@fujitsu.com
Suggested-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Most code in send_ack() and send_atomic_ack() are duplicate, move them to
a new helper send_common_ack().
In newer IBA spec, some opcodes require acknowledge with a zero-length
read response, with this new helper, we can easily implement it later.
Link: https://lore.kernel.org/r/1659335010-2-1-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
An incoming Read request causes multiple Read responses. If a user MR to
copy data from is unavailable or responder cannot send a reply, then the
error messages can be printed for each response attempt, resulting in
message overflow.
Link: https://lore.kernel.org/r/20220829071218.1639065-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Make changes to the three tasklets so that the exit logic from each is the
same. This makes the code easier to understand.
Link: https://lore.kernel.org/r/20220630190425.2251-8-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The qp parameter in free_rd_atomic_resource() has become
unused so remove it directly.
Fixes: 15ae1375ea91 ("RDMA/rxe: Fix qp reference counting for atomic ops")
Link: https://lore.kernel.org/all/20220708035547.6592-1-yangx.jy@fujitsu.com/
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
It's better to use the unified naming format.
Link: https://lore.kernel.org/r/20220705145212.12014-2-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
It's redundant to prepare resources for Read and Atomic
requests by different functions. Replace them by a common
rxe_prepare_res() with different parameters. In addition,
the common rxe_prepare_res() can also be used by new Flush
and Atomic Write requests in the future.
Link: https://lore.kernel.org/r/20220705145212.12014-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The pyverbs test suite generates a few dmesg traces from intentional error
tests. This patch replaces those messages with pr_debug() calls which
improves the usefullness of the tests.
Link: https://lore.kernel.org/r/20220630190425.2251-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Make the execution of the atomic operation in rxe_atomic_reply()
conditional on res->replay and make duplicate_request() call into
rxe_atomic_reply() to merge the two flows. This is modeled on the behavior
of read reply. Delete the skb from the atomic responder resource since it
is no longer used. Adjust the reference counting of the qp in
send_atomic_ack() for this flow.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220606143836.3323-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Move the saved original value to the atomic responder resource. This
replaces saving it in the qp. In preparation for merging the normal and
retry atomic responder flows.
Link: https://lore.kernel.org/r/20220606143836.3323-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Move the allocation of the atomic responder resource up into
rxe_atomic_reply() from send_atomic_ack(). In preparation for merging the
normal and retry atomic responder flows.
Link: https://lore.kernel.org/r/20220606143836.3323-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add a responder state for atomic reply similar to read reply and rename
process_atomic() rxe_atomic_reply(). In preparation for merging the normal
and retry atomic responder flows.
Link: https://lore.kernel.org/r/20220606143836.3323-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Separate the code that prepares the atomic responder resource into a
subroutine. This is preparation for merging the normal and retry atomic
responder flows.
Link: https://lore.kernel.org/r/20220606143836.3323-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The pkt parameters in prepare_ack_packet(), send_ack() and
send_atomic_ack() have become useless by the following commits. So remove
them directly.
Fixes: bf139b58af09 ("RDMA/rxe: Remove unused pkt->offset")
Fixes: 3896bde92d03 ("RDMA/rxe: Fix extra copy in prepare_ack_packet")
Link: https://lore.kernel.org/r/20220623131627.18903-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Following patches have dependencies.
Resolve the merge conflict in
drivers/net/ethernet/mellanox/mlx5/core/main.c by keeping the new names
for the fs functions following linux-next:
https://lore.kernel.org/r/20220519113529.226bc3e2@canb.auug.org.au/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In the tasklets (completer, responder, and requester) check the return
value from rxe_get() to detect failures to get a reference. This only
occurs if the qp has had its reference count drop to zero which indicates
that it no longer should be used.
The ref is never 0 today because the tasklets are flushed before the ref
is dropped. The next patch changes this so that the ref is dropped then
the tasklets are flushed.
Link: https://lore.kernel.org/r/20220421014042.26985-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|