summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2019-07-26IB/mlx5: Report correctly tag matching rendezvous capabilityDanit Goldberg1-2/+6
commit 89705e92700170888236555fe91b45e4c1bb0985 upstream. Userspace expects the IB_TM_CAP_RC bit to indicate that the device supports RC transport tag matching with rendezvous offload. However the firmware splits this into two capabilities for eager and rendezvous tag matching. Only if the FW supports both modes should userspace be told the tag matching capability is available. Cc: <stable@vger.kernel.org> # 4.13 Fixes: eb761894351d ("IB/mlx5: Fill XRQ capabilities") Signed-off-by: Danit Goldberg <danitg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26RDMA/srp: Accept again source addresses that do not have a port numberBart Van Assche1-6/+15
commit bcef5b7215681250c4bf8961dfe15e9e4fef97d0 upstream. The function srp_parse_in() is used both for parsing source address specifications and for target address specifications. Target addresses must have a port number. Having to specify a port number for source addresses is inconvenient. Make sure that srp_parse_in() supports again parsing addresses with no port number. Cc: <stable@vger.kernel.org> Fixes: c62adb7def71 ("IB/srp: Fix IPv6 address parsing") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26ipoib: correcly show a VF hardware addressDenis Kirjanov1-0/+1
[ Upstream commit 64d701c608fea362881e823b666327f5d28d7ffd ] in the case of IPoIB with SRIOV enabled hardware ip link show command incorrecly prints 0 instead of a VF hardware address. Before: 11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast state UP mode DEFAULT group default qlen 256 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 MAC 00:00:00:00:00:00, spoof checking off, link-state disable, trust off, query_rss off ... After: 11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast state UP mode DEFAULT group default qlen 256 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, link-state disable, trust off, query_rss off v1->v2: just copy an address without modifing ifla_vf_mac v2->v3: update the changelog Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14IB/hfi1: Handle port down properly in pioMike Marciniszyn4-7/+8
[ Upstream commit 942a899335707fc9cfc97cb382a60734b2ff4e03 ] The call to sc_buffer_alloc currently returns NULL (no buffer) or a buffer descriptor. There is a third case when the port is down. Currently that returns NULL and this prevents the caller from properly handling the sc_buffer_alloc() failure. A verbs code link test after the call is racy so the indication needs to come from the state check inside the allocation routine to be valid. Fix by encoding the ECOMM failure like SDMA. IS_ERR_OR_NULL() tests are added at all call sites. For verbs send, this needs to treat any error by returning a completion without any MMIO copy. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14IB/hfi1: Handle wakeup of orphaned QPs for pioMike Marciniszyn1-0/+16
[ Upstream commit 099a884ba4c00145cef283d36e050726311c2e95 ] Once a send context is taken down due to a link failure, any QPs waiting for pio credits will stay on the waitlist indefinitely. Fix by wakeing up all QPs linked to piowait list. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14IB/hfi1: Wakeup QPs orphaned on wait list after flushMike Marciniszyn1-0/+17
[ Upstream commit f972775b1cc0441ae22c9f8d06dd16b118463632 ] Once an SDMA engine is taken down due to a link failure, any waiting QPs that do not have outstanding descriptors in the ring will stay on the dmawait list as long as the port is down. Since there is no timer running, they will stay there for a long time. The fix is to wake up all iowaits linked to dmawait. The send engine will build and post packets that get flushed back. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14IB/hfi1: Use aborts to trigger RC throttlingMike Marciniszyn3-4/+37
[ Upstream commit 4bb02e9572af1383038d83ad196d7166c515f2ee ] SDMA and pio flushes will cause a lot of packets to be transmitted after a link has gone down, using a lot of CPU to retransmit packets. Fix for RC QPs by recognizing the flush status and: - Forcing a timer start - Putting the QP into a "send one" mode Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14IB/hfi1: Create inline to get extended headersMike Marciniszyn2-20/+32
[ Upstream commit 9755f72496664eec70bc804104118b5797b6bf63 ] This paves the way for another patch that reacts to a flush sdma completion for RC. Fixes: 81cd3891f021 ("IB/hfi1: Add support for 16B Management Packets") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-03RDMA: Directly cast the sockaddr union to sockaddrJason Gunthorpe3-14/+12
commit 641114d2af312d39ca9bbc2369d18a5823da51c6 upstream. gcc 9 now does allocation size tracking and thinks that passing the member of a union and then accessing beyond that member's bounds is an overflow. Instead of using the union member, use the entire union with a cast to get to the sockaddr. gcc will now know that the memory extends the full size of the union. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-25IB/hfi1: Validate page aligned for a given virtual addressKamenee Arumugam1-0/+3
[ Upstream commit 97736f36dbebf2cda2799db3b54717ba5b388255 ] User applications can register memory regions for TID buffers that are not aligned on page boundaries. Hfi1 is expected to pin those pages in memory and cache the pages with mmu_rb. The rb tree will fail to insert pages that are not aligned correctly. Validate whether a given virtual address is page aligned before pinning. Fixes: 7e7a436ecb6e ("staging/hfi1: Add TID entry program function body") Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-25IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr valueMike Marciniszyn3-4/+2
[ Upstream commit 35164f5259a47ea756fa1deb3e463ac2a4f10dc9 ] The command 'ibv_devinfo -v' reports 0 for max_mr. Fix by assigning the query values after the mr lkey_table has been built rather than early on in the driver. Fixes: 7b1e2099adc8 ("IB/rdmavt: Move memory registration into rdmavt") Reviewed-by: Josh Collier <josh.d.collier@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-25IB/hfi1: Insure freeze_work work_struct is canceled on shutdownMike Marciniszyn1-0/+1
[ Upstream commit 6d517353c70bb0818b691ca003afdcb5ee5ea44e ] By code inspection, the freeze_work is never canceled. Fix by adding a cancel_work_sync in the shutdown path to insure it is no longer running. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-25IB/rdmavt: Fix alloc_qpn() WARN_ON()Mike Marciniszyn1-1/+2
[ Upstream commit 2abae62a26a265129b364d8c1ef3be55e2c01309 ] The qpn allocation logic has a WARN_ON() that intends to detect the use of an index that will introduce bits in the lower order bits of the QOS bits in the QPN. Unfortunately, it has the following bugs: - it misfires when wrapping QPN allocation for non-QOS - it doesn't correctly detect low order QOS bits (despite the comment) The WARN_ON() should not be applied to non-QOS (qos_shift == 1). Additionally, it SHOULD test the qpn bits per the table below: 2 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^ [ 0, 0, 0, 0, 0, 0, sc0], qp bit 1 always 0* 3-4 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^ [ 0, 0, 0, 0, 0, sc1, sc0], qp bits [21] always 0 5-8 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^ [ 0, 0, 0, 0, sc2, sc1, sc0] qp bits [321] always 0 Fix by qualifying the warning for qos_shift > 1 and producing the correct mask to insure the above bits are zero without generating a superfluous warning. Fixes: 501edc42446e ("IB/rdmavt: Correct warning during QPN allocation") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-25IB/hfi1: Silence txreq allocation warningsMike Marciniszyn2-2/+3
commit 3230f4a8d44e4a0bb7afea814b280b5129521f52 upstream. The following warning can happen when a memory shortage occurs during txreq allocation: [10220.939246] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) [10220.939246] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016 [10220.939247] cache: mnt_cache, object size: 384, buffer size: 384, default order: 2, min order: 0 [10220.939260] Workqueue: hfi0_0 _hfi1_do_send [hfi1] [10220.939261] node 0: slabs: 1026568, objs: 43115856, free: 0 [10220.939262] Call Trace: [10220.939262] node 1: slabs: 820872, objs: 34476624, free: 0 [10220.939263] dump_stack+0x5a/0x73 [10220.939265] warn_alloc+0x103/0x190 [10220.939267] ? wake_all_kswapds+0x54/0x8b [10220.939268] __alloc_pages_slowpath+0x86c/0xa2e [10220.939270] ? __alloc_pages_nodemask+0x2fe/0x320 [10220.939271] __alloc_pages_nodemask+0x2fe/0x320 [10220.939273] new_slab+0x475/0x550 [10220.939275] ___slab_alloc+0x36c/0x520 [10220.939287] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939299] ? __get_txreq+0x54/0x160 [hfi1] [10220.939310] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939312] __slab_alloc+0x40/0x61 [10220.939323] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939325] kmem_cache_alloc+0x181/0x1b0 [10220.939336] hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939348] ? hfi1_verbs_send_dma+0x386/0xa10 [hfi1] [10220.939359] ? find_prev_entry+0xb0/0xb0 [hfi1] [10220.939371] hfi1_do_send+0x1d9/0x3f0 [hfi1] [10220.939372] process_one_work+0x171/0x380 [10220.939374] worker_thread+0x49/0x3f0 [10220.939375] kthread+0xf8/0x130 [10220.939377] ? max_active_store+0x80/0x80 [10220.939378] ? kthread_bind+0x10/0x10 [10220.939379] ret_from_fork+0x35/0x40 [10220.939381] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) The shortage is handled properly so the message isn't needed. Silence by adding the no warn option to the slab allocation. Fixes: 45842abbb292 ("staging/rdma/hfi1: move txreq header code") Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-25IB/hfi1: Correct tid qp rcd to match verbs contextMike Marciniszyn3-3/+15
commit cc78076af14e1478c1a8fb18997674b5f8cbe3c8 upstream. The qp priv rcd pointer doesn't match the context being used for verbs causing issues when 9B and kdeth packets are processed by different receive contexts and hence different CPUs. When running on different CPUs the following panic can occur: WARNING: CPU: 3 PID: 2584 at lib/list_debug.c:59 __list_del_entry+0xa1/0xd0 list_del corruption. prev->next should be ffff9a7ac31f7a30, but was ffff9a7c3bc89230 CPU: 3 PID: 2584 Comm: z_wr_iss Kdump: loaded Tainted: P OE ------------ 3.10.0-862.2.3.el7_lustre.x86_64 #1 Call Trace: <IRQ> [<ffffffffb7b0d78e>] dump_stack+0x19/0x1b [<ffffffffb74916d8>] __warn+0xd8/0x100 [<ffffffffb749175f>] warn_slowpath_fmt+0x5f/0x80 [<ffffffffb7768671>] __list_del_entry+0xa1/0xd0 [<ffffffffc0c7a945>] process_rcv_qp_work+0xb5/0x160 [hfi1] [<ffffffffc0c7bc2b>] handle_receive_interrupt_nodma_rtail+0x20b/0x2b0 [hfi1] [<ffffffffc0c70683>] receive_context_interrupt+0x23/0x40 [hfi1] [<ffffffffb7540a94>] __handle_irq_event_percpu+0x44/0x1c0 [<ffffffffb7540c42>] handle_irq_event_percpu+0x32/0x80 [<ffffffffb7540ccc>] handle_irq_event+0x3c/0x60 [<ffffffffb7543a1f>] handle_edge_irq+0x7f/0x150 [<ffffffffb742d504>] handle_irq+0xe4/0x1a0 [<ffffffffb7b23f7d>] do_IRQ+0x4d/0xf0 [<ffffffffb7b16362>] common_interrupt+0x162/0x162 <EOI> [<ffffffffb775a326>] ? memcpy+0x6/0x110 [<ffffffffc109210d>] ? abd_copy_from_buf_off_cb+0x1d/0x30 [zfs] [<ffffffffc10920f0>] ? abd_copy_to_buf_off_cb+0x30/0x30 [zfs] [<ffffffffc1093257>] abd_iterate_func+0x97/0x120 [zfs] [<ffffffffc10934d9>] abd_copy_from_buf_off+0x39/0x60 [zfs] [<ffffffffc109b828>] arc_write_ready+0x178/0x300 [zfs] [<ffffffffb7b11032>] ? mutex_lock+0x12/0x2f [<ffffffffb7b11032>] ? mutex_lock+0x12/0x2f [<ffffffffc1164d05>] zio_ready+0x65/0x3d0 [zfs] [<ffffffffc04d725e>] ? tsd_get_by_thread+0x2e/0x50 [spl] [<ffffffffc04d1318>] ? taskq_member+0x18/0x30 [spl] [<ffffffffc115ef22>] zio_execute+0xa2/0x100 [zfs] [<ffffffffc04d1d2c>] taskq_thread+0x2ac/0x4f0 [spl] [<ffffffffb74cee80>] ? wake_up_state+0x20/0x20 [<ffffffffc115ee80>] ? zio_taskq_member.isra.7.constprop.10+0x80/0x80 [zfs] [<ffffffffc04d1a80>] ? taskq_thread_spawn+0x60/0x60 [spl] [<ffffffffb74bae31>] kthread+0xd1/0xe0 [<ffffffffb74bad60>] ? insert_kthread_work+0x40/0x40 [<ffffffffb7b1f5f7>] ret_from_fork_nospec_begin+0x21/0x21 [<ffffffffb74bad60>] ? insert_kthread_work+0x40/0x40 Fix by reading the map entry in the same manner as the hardware so that the kdeth and verbs contexts match. Cc: <stable@vger.kernel.org> Fixes: 5190f052a365 ("IB/hfi1: Allow the driver to initialize QP priv struct") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-25IB/hfi1: Avoid hardlockup with flushlist_lockMike Marciniszyn1-6/+3
commit cf131a81967583ae737df6383a0893b9fee75b4e upstream. Heavy contention of the sde flushlist_lock can cause hard lockups at extreme scale when the flushing logic is under stress. Mitigate by replacing the item at a time copy to the local list with an O(1) list_splice_init() and using the high priority work queue to do the flushes. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-25IB/hfi1: Close PSM sdma_progress sleep windowMike Marciniszyn2-9/+4
commit da9de5f8527f4b9efc82f967d29a583318c034c7 upstream. The call to sdma_progress() is called outside the wait lock. In this case, there is a race condition where sdma_progress() can return false and the sdma_engine can idle. If that happens, there will be no more sdma interrupts to cause the wakeup and the user_sdma xmit will hang. Fix by moving the lock to enclose the sdma_progress() call. Also, delete busycount. The need for this was removed by: commit bcad29137a97 ("IB/hfi1: Serve the most starved iowait entry first") Cc: <stable@vger.kernel.org> Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-25IB/hfi1: Validate fault injection opcode user inputKaike Wan1-0/+5
commit 5f90677ed31963abb184ee08ebee4a4a68225dd8 upstream. The opcode range for fault injection from user should be validated before it is applied to the fault->opcodes[] bitmap to avoid out-of-bound error. Cc: <stable@vger.kernel.org> Fixes: a74d5307caba ("IB/hfi1: Rework fault injection machinery") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31RDMA/rxe: Fix slab-out-bounds access which lead to kernel crash laterLeon Romanovsky1-5/+6
[ Upstream commit a4b7013db23e93824ac53083eeb3e4efdef4b5b0 ] BUG: KASAN: slab-out-of-bounds in rxe_mem_init_user+0x6c1/0x740 [rdma_rxe] Read of size 8 at addr ffff88805c01a608 by task ib_send_bw/573 CPU: 24 PID: 573 Comm: ib_send_bw Not tainted 5.0.0-rc5+ #189 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: rxe_mem_init_user+0x6c1/0x740 [rdma_rxe] rxe_reg_user_mr+0x9b/0x110 [rdma_rxe] ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs] ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs] rxe_mem_init_user+0x6c1/0x740 [rdma_rxe] rxe_reg_user_mr+0x9b/0x110 [rdma_rxe] ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs] ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs] ib_uverbs_cmd_verbs+0x5f2/0xf20 [ib_uverbs] ib_uverbs_ioctl+0x202/0x310 [ib_uverbs] do_vfs_ioctl+0x193/0x1440 ksys_ioctl+0x3a/0x70 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x13f/0x570 entry_SYSCALL_64_after_hwframe+0x49/0xbe Allocated by task 573: __kasan_kmalloc.constprop.5+0xc1/0xd0 __kmalloc+0x161/0x310 rxe_mem_alloc+0x52/0x470 [rdma_rxe] rxe_mem_init_user+0x113/0x740 [rdma_rxe] rxe_reg_user_mr+0x9b/0x110 [rdma_rxe] ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs] ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs] ib_uverbs_cmd_verbs+0x5f2/0xf20 [ib_uverbs] ib_uverbs_ioctl+0x202/0x310 [ib_uverbs] do_vfs_ioctl+0x193/0x1440 ksys_ioctl+0x3a/0x70 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x13f/0x570 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 0: __kasan_slab_free+0x12e/0x180 kfree+0x10a/0x2c0 rcu_process_callbacks+0xa77/0x1260 __do_softirq+0x2ad/0xacb Test scenario: ib_send_bw -x 1 -d rxe0 -a & ib_send_bw -x 1 -d rxe0 -a localhost Fixes: 8700e3e7c485 ("Soft RoCE driver") Reported-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Tested-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31IB/mlx5: Compare only index part of a memory window rkeyArtemy Kovalyov1-1/+10
[ Upstream commit d623dfd2836114507d647c9793a80d213d8bffe8 ] The InfiniBand Architecture Specification section 10.6.7.2.4 TYPE 2 MEMORY WINDOWS says that if the CI supports the Base Memory Management Extensions defined in this specification, the R_Key format for a Type 2 Memory Window must consist of: * 24 bit index in the most significant bits of the R_Key, which is owned by the CI, and * 8 bit key in the least significant bits of the R_Key, which is owned by the Consumer. This means that the kernel should compare only the index part of a R_Key to determine equality with another R_Key. Fixes: db570d7deafb ("IB/mlx5: Add ODP support to MW") Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31RDMA/hns: Fix bad endianess of port_pd variableLeon Romanovsky1-1/+1
[ Upstream commit 6734b2973565e36659e97e12ab0d0faf1d9f3fbe ] port_pd is treated as le32 in declaration and read, fix assignment to be in le32 too. This change fixes the following compilation warnings. drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: warning: incorrect type in assignment (different base types) drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: expected restricted __le32 [usertype] port_pd drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: got restricted __be32 [usertype] Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Lijun Ou <ouliun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31RDMA/cxgb4: Fix null pointer dereference on alloc_skb failureColin Ian King1-0/+2
[ Upstream commit a6d2a5a92e67d151c98886babdc86d530d27111c ] Currently if alloc_skb fails to allocate the skb a null skb is passed to t4_set_arp_err_handler and this ends up dereferencing the null skb. Avoid the NULL pointer dereference by checking for a NULL skb and returning early. Addresses-Coverity: ("Dereference null return") Fixes: b38a0ad8ec11 ("RDMA/cxgb4: Set arp error handler for PASS_ACCEPT_RPL messages") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31RDMA/cma: Consider scope_id while binding to ipv6 ll addressParav Pandit1-6/+19
[ Upstream commit 5d7ed2f27bbd482fd29e6b2e204b1a1ee8a0b268 ] When two netdev have same link local addresses (such as vlan and non vlan), two rdma cm listen id should be able to bind to following different addresses. listener-1: addr=lla, scope_id=A, port=X listener-2: addr=lla, scope_id=B, port=X However while comparing the addresses only addr and port are considered, due to which 2nd listener fails to listen. In below example of two listeners, 2nd listener is failing with address in use error. $ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1 -p 4545& $ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1.200 -p 4545 rdma_bind_addr: Address already in use To overcome this, consider the scope_ids as well which forms the accurate IPv6 link local address. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31IB/hfi1: Fix WQ_MEM_RECLAIM warningMike Marciniszyn1-1/+2
[ Upstream commit 4c4b1996b5db688e2dcb8242b0a3bf7b1e845e42 ] The work_item cancels that occur when a QP is destroyed can elicit the following trace: workqueue: WQ_MEM_RECLAIM ipoib_wq:ipoib_cm_tx_reap [ib_ipoib] is flushing !WQ_MEM_RECLAIM hfi0_0:_hfi1_do_send [hfi1] WARNING: CPU: 7 PID: 1403 at kernel/workqueue.c:2486 check_flush_dependency+0xb1/0x100 Call Trace: __flush_work.isra.29+0x8c/0x1a0 ? __switch_to_asm+0x40/0x70 __cancel_work_timer+0x103/0x190 ? schedule+0x32/0x80 iowait_cancel_work+0x15/0x30 [hfi1] rvt_reset_qp+0x1f8/0x3e0 [rdmavt] rvt_destroy_qp+0x65/0x1f0 [rdmavt] ? _cond_resched+0x15/0x30 ib_destroy_qp+0xe9/0x230 [ib_core] ipoib_cm_tx_reap+0x21c/0x560 [ib_ipoib] process_one_work+0x171/0x370 worker_thread+0x49/0x3f0 kthread+0xf8/0x130 ? max_active_store+0x80/0x80 ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 Since QP destruction frees memory, hfi1_wq should have the WQ_MEM_RECLAIM. The hfi1_wq does not allocate memory with GFP_KERNEL or otherwise become entangled with memory reclaim, so this flag is appropriate. Fixes: 0a226edd203f ("staging/rdma/hfi1: Use parallel workqueue for SDMA engines") Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-25RDMA/ipoib: Allow user space differentiate between valid dev_portLeon Romanovsky1-1/+12
commit b79656ed44c6865e17bcd93472ec39488bcc4984 upstream. Systemd triggers the following warning during IPoIB device load: mlx5_core 0000:00:0c.0 ib0: "systemd-udevd" wants to know my dev_id. Should it look at dev_port instead? See Documentation/ABI/testing/sysfs-class-net for more info. This is caused due to user space attempt to differentiate old systems without dev_port and new systems with dev_port. In case dev_port will be zero, the systemd will try to read dev_id instead. There is no need to print a warning in such case, because it is valid situation and it is needed to ensure systemd compatibility with old kernels. Link: https://github.com/systemd/systemd/blob/master/src/udev/udev-builtin-net_id.c#L358 Cc: <stable@vger.kernel.org> # 4.19 Fixes: f6350da41dc7 ("IB/ipoib: Log sysfs 'dev_id' accesses from userspace") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25RDMA/mlx5: Use get_zeroed_page() for clock_infoJason Gunthorpe1-2/+3
commit ddcdc368b1033e19fd3a5f750752e10e28a87826 upstream. get_zeroed_page() returns a virtual address for the page which is better than allocating a struct page and doing a permanent kmap on it. Cc: stable@vger.kernel.org Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-29rdma: fix build errors on s390 and MIPS due to bad ZERO_PAGE useLinus Torvalds1-1/+1
The parameter to ZERO_PAGE() was wrong, but since all architectures except for MIPS and s390 ignore it, it wasn't noticed until 0-day reported the build error. Fixes: 67f269b37f9b ("RDMA/ucontext: Fix regression with disassociate") Cc: stable@vger.kernel.org Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds6-20/+75
Pull rdma fixes from Jason Gunthorpe: "One core bug fix and a few driver ones - FRWR memory registration for hfi1/qib didn't work with with some iovas causing a NFSoRDMA failure regression due to a fix in the NFS side - A command flow error in mlx5 allowed user space to send a corrupt command (and also smash the kernel stack we've since learned) - Fix a regression and some bugs with device hot unplug that was discovered while reviewing Andrea's patches - hns has a failure if the user asks for certain QP configurations" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/hns: Bugfix for mapping user db RDMA/ucontext: Fix regression with disassociate RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages RDMA/mlx5: Do not allow the user to write to the clock page IB/mlx5: Fix scatter to CQE in DCT QP creation IB/rdmavt: Fix frwr memory registration
2019-04-25RDMA/hns: Bugfix for mapping user dbLijun Ou1-1/+1
When the maximum send wr delivered by the user is zero, the qp does not have a sq. When allocating the sq db buffer to store the user sq pi pointer and map it to the kernel mode, max_send_wr is used as the trigger condition, while the kernel does not consider the max_send_wr trigger condition when mapmping db. It will cause sq record doorbell map fail and create qp fail. The failed print information as follows: hns3 0000:7d:00.1: Send cmd: tail - 418, opcode - 0x8504, flag - 0x0011, retval - 0x0000 hns3 0000:7d:00.1: Send cmd: 0xe59dc000 0x00000000 0x00000000 0x00000000 0x00000116 0x0000ffff hns3 0000:7d:00.1: sq record doorbell map failed! hns3 0000:7d:00.1: Create RC QP failed Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space") Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24RDMA/ucontext: Fix regression with disassociateJason Gunthorpe2-3/+50
When this code was consolidated the intention was that the VMA would become backed by anonymous zero pages after the zap_vma_pte - however this very subtly relied on setting the vm_ops = NULL and clearing the VM_SHARED bits to transform the VMA into an anonymous VMA. Since the vm_ops was removed this broke. Now userspace gets a SIGBUS if it touches the vma after disassociation. Instead of converting the VMA to anonymous provide a fault handler that puts a zero'd page into the VMA when user-space touches it after disassociation. Cc: stable@vger.kernel.org Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Fixes: 5f9794dc94f5 ("RDMA/ucontext: Add a core API for mmaping driver IO memory") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24RDMA/mlx5: Use rdma_user_map_io for mapping BAR pagesJason Gunthorpe1-5/+3
Since mlx5 supports device disassociate it must use this API for all BAR page mmaps, otherwise the pages can remain mapped after the device is unplugged causing a system crash. Cc: stable@vger.kernel.org Fixes: 5f9794dc94f5 ("RDMA/ucontext: Add a core API for mmaping driver IO memory") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-04-24RDMA/mlx5: Do not allow the user to write to the clock pageJason Gunthorpe1-0/+2
The intent of this VMA was to be read-only from user space, but the VM_MAYWRITE masking was missed, so mprotect could make it writable. Cc: stable@vger.kernel.org Fixes: 5c99eaecb1fc ("IB/mlx5: Mmap the HCA's clock info to user-space") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-04-19coredump: fix race condition between mmget_not_zero()/get_task_mm() and core ↵Andrea Arcangeli1-0/+3
dumping The core dumping code has always run without holding the mmap_sem for writing, despite that is the only way to ensure that the entire vma layout will not change from under it. Only using some signal serialization on the processes belonging to the mm is not nearly enough. This was pointed out earlier. For example in Hugh's post from Jul 2017: https://lkml.kernel.org/r/alpine.LSU.2.11.1707191716030.2055@eggly.anvils "Not strictly relevant here, but a related note: I was very surprised to discover, only quite recently, how handle_mm_fault() may be called without down_read(mmap_sem) - when core dumping. That seems a misguided optimization to me, which would also be nice to correct" In particular because the growsdown and growsup can move the vm_start/vm_end the various loops the core dump does around the vma will not be consistent if page faults can happen concurrently. Pretty much all users calling mmget_not_zero()/get_task_mm() and then taking the mmap_sem had the potential to introduce unexpected side effects in the core dumping code. Adding mmap_sem for writing around the ->core_dump invocation is a viable long term fix, but it requires removing all copy user and page faults and to replace them with get_dump_page() for all binary formats which is not suitable as a short term fix. For the time being this solution manually covers the places that can confuse the core dump either by altering the vma layout or the vma flags while it runs. Once ->core_dump runs under mmap_sem for writing the function mmget_still_valid() can be dropped. Allowing mmap_sem protected sections to run in parallel with the coredump provides some minor parallelism advantage to the swapoff code (which seems to be safe enough by never mangling any vma field and can keep doing swapins in parallel to the core dumping) and to some other corner case. In order to facilitate the backporting I added "Fixes: 86039bd3b4e6" however the side effect of this same race condition in /proc/pid/mem should be reproducible since before 2.6.12-rc2 so I couldn't add any other "Fixes:" because there's no hash beyond the git genesis commit. Because find_extend_vma() is the only location outside of the process context that could modify the "mm" structures under mmap_sem for reading, by adding the mmget_still_valid() check to it, all other cases that take the mmap_sem for reading don't need the new check after mmget_not_zero()/get_task_mm(). The expand_stack() in page fault context also doesn't need the new check, because all tasks under core dumping are frozen. Link: http://lkml.kernel.org/r/20190325224949.11068-1-aarcange@redhat.com Fixes: 86039bd3b4e6 ("userfaultfd: add new syscall to provide memory externalization") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Jann Horn <jannh@google.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jann Horn <jannh@google.com> Acked-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-18IB/mlx5: Fix scatter to CQE in DCT QP creationGuy Levi2-4/+9
When scatter to CQE is enabled on a DCT QP it corrupts the mailbox command since it tried to treat it as as QP create mailbox command instead of a DCT create command. The corrupted mailbox command causes userspace to malfunction as the device doesn't create the QP as expected. A new mlx5 capability is exposed to user-space which ensures that it will not enable the feature on DCT without this fix in the kernel. Fixes: 5d6ff1babe78 ("IB/mlx5: Support scatter to CQE for DC transport type") Signed-off-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-16IB/rdmavt: Fix frwr memory registrationJosh Collier1-7/+10
Current implementation was not properly handling frwr memory registrations. This was uncovered by commit 27f26cec761das ("xprtrdma: Plant XID in on-the-wire RDMA offset (FRWR)") in which xprtrdma, which is used for NFS over RDMA, started failing as it was the first ULP to modify the ib_mr iova resulting in the NFS server getting REMOTE ACCESS ERROR when attempting to perform RDMA Writes to the client. The fix is to properly capture the true iova, offset, and length in the call to ib_map_mr_sg, and then update the iova when processing the IB_WR_REG_MEM on the send queue. Fixes: a41081aa5936 ("IB/rdmavt: Add support for ib_map_mr_sg") Cc: stable@vger.kernel.org Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Josh Collier <josh.d.collier@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10IB/hfi1: Do not flush send queue in the TID RDMA second legKaike Wan1-23/+8
When a QP is put into error state, the send queue will be flushed. This mechanism is implemented in both the first and the second leg of the send engine. Since the second leg is only responsible for data transactions in the KDETH space for the TID RDMA WRITE request, it should not perform the flushing of the send queue. This patch removes the flushing function of the second leg, but still keeps the bailing out of the QP if it is put into error state. Fixes: 70dcb2e3dc6a ("IB/hfi1: Add the TID second leg send packet builder") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08RDMA/hns: Bugfix for SCC hem freeYangyang Li1-3/+0
The method of hem free for SCC context is different from qp context. In the current version, if free SCC hem during the execution of qp free, there may be smmu error as below: arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received: arm-smmu-v3 arm-smmu-v3.1.auto: 0x00007d0000000010 arm-smmu-v3 arm-smmu-v3.1.auto: 0x000012000000017c arm-smmu-v3 arm-smmu-v3.1.auto: 0x00000000000009e0 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000000000000000 As SCC context is still used by hardware after qp free, we can solve this problem by removing SCC hem free from hns_roce_qp_free. Fixes: 6a157f7d1b14 ("RDMA/hns: Add SCC context allocation support for hip08") Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08RDMA/hns: Fix bug that caused srq creation to failLijun Ou2-4/+6
Due to the incorrect use of the seg and obj information, the position of the mtt is calculated incorrectly, and the free space of the page is not enough to store the entire mtt, resulting in access to the next page. This patch fixes this problem. Unable to handle kernel paging request at virtual address ffff00006e3cd000 ... Call trace: hns_roce_write_mtt+0x154/0x2f0 [hns_roce] hns_roce_buf_write_mtt+0xa8/0xd8 [hns_roce] hns_roce_create_srq+0x74c/0x808 [hns_roce] ib_create_srq+0x28/0xc8 Fixes: 0203b14c4f32 ("RDMA/hns: Unify the calculation for hem index in hip08") Signed-off-by: chenglang <chenglang@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08RDMA/vmw_pvrdma: Fix memory leak on pvrdma_pci_removeKamal Heib1-0/+2
Make sure to free the DSR on pvrdma_pci_remove() to avoid the memory leak. Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver") Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27IB/mlx5: Reset access mask when looping inside page fault handlerMoni Shoua1-1/+2
If page-fault handler spans multiple MRs then the access mask needs to be reset before each MR handling or otherwise write access will be granted to mapped pages instead of read-only. Cc: <stable@vger.kernel.org> # 3.19 Fixes: 7bdf65d411c1 ("IB/mlx5: Handle page faults") Reported-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27IB/hfi1: Fix the allocation of RSM tableKaike Wan1-7/+19
The receive side mapping (RSM) on hfi1 hardware is a special matching mechanism to direct an incoming packet to a given hardware receive context. It has 4 instances of matching capabilities (RSM0 - RSM3) that share the same RSM table (RMT). The RMT has a total of 256 entries, each of which points to a receive context. Currently, three instances of RSM have been used: 1. RSM0 by QOS; 2. RSM1 by PSM FECN; 3. RSM2 by VNIC. Each RSM instance should reserve enough entries in RMT to function properly. Since both PSM and VNIC could allocate any receive context between dd->first_dyn_alloc_ctxt and dd->num_rcv_contexts, PSM FECN must reserve enough RMT entries to cover the entire receive context index range (dd->num_rcv_contexts - dd->first_dyn_alloc_ctxt) instead of only the user receive contexts allocated for PSM (dd->num_user_contexts). Consequently, the sizing of dd->num_user_contexts in set_up_context_variables is incorrect. Fixes: 2280740f01ae ("IB/hfi1: Virtual Network Interface Controller (VNIC) HW support") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27IB/hfi1: Eliminate opcode tests on mr derefKaike Wan1-2/+2
When an old ack_queue entry is used to store an incoming request, it may need to clean up the old entry if it is still referencing the MR. Originally only RDMA READ request needed to reference MR on the responder side and therefore the opcode was tested when cleaning up the old entry. The introduction of tid rdma specific operations in the ack_queue makes the specific opcode tests wrong. Multiple opcodes (RDMA READ, TID RDMA READ, and TID RDMA WRITE) may need MR ref cleanup. Remove the opcode specific tests associated with the ack_queue. Fixes: f48ad614c100 ("IB/hfi1: Move driver out of staging") Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27IB/hfi1: Clear the IOWAIT pending bits when QP is put into error stateKaike Wan1-0/+2
When a QP is put into error state, it may be waiting for send engine resources. In this case, the QP will be removed from the send engine's waiting list, but its IOWAIT pending bits are not cleared. This will normally not have any major impact as the QP is being destroyed. However, the QP still needs to wind down its operations, such as draining the send queue by scheduling the send engine. Clearing the pending bits will avoid any potential complications. In addition, if the QP will eventually hang, clearing the pending bits can help debugging by presenting a consistent picture if the user dumps the qp_stats. This patch clears a QP's IOWAIT_PENDING_IB and IO_PENDING_TID bits in priv->s_iowait.flags in this case. Fixes: 5da0fc9dbf89 ("IB/hfi1: Prepare resource waits for dual leg") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27IB/hfi1: Failed to drain send queue when QP is put into error stateKaike Wan1-1/+1
When a QP is put into error state, all pending requests in the send work queue should be drained. The following sequence of events could lead to a failure, causing a request to hang: (1) The QP builds a packet and tries to send through SDMA engine. However, PIO engine is still busy. Consequently, this packet is put on the QP's tx list and the QP is put on the PIO waiting list. The field qp->s_flags is set with HFI1_S_WAIT_PIO_DRAIN; (2) The QP is put into error state by the user application and notify_error_qp() is called, which removes the QP from the PIO waiting list and the packet from the QP's tx list. In addition, qp->s_flags is cleared of RVT_S_ANY_WAIT_IO bits, which does not include HFI1_S_WAIT_PIO_DRAIN bit; (3) The hfi1_schdule_send() function is called to drain the QP's send queue. Subsequently, hfi1_do_send() is called. Since the flag bit HFI1_S_WAIT_PIO_DRAIN is set in qp->s_flags, hfi1_send_ok() fails. As a result, hfi1_do_send() bails out without draining any request from the send queue; (4) The PIO engine completes the sending and tries to wake up any QP on its waiting list. But the QP has been removed from the PIO waiting list and therefore is kept in sleep forever. The fix is to clear qp->s_flags of HFI1_S_ANY_WAIT_IO bits in step (2). HFI1_S_ANY_WAIT_IO includes RVT_S_ANY_WAIT_IO and HFI1_S_WAIT_PIO_DRAIN. Fixes: 2e2ba09e48b7 ("IB/rdmavt, IB/hfi1: Create device dependent s_flags") Cc: <stable@vger.kernel.org> # 4.19.x+ Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-18i40iw: Avoid panic when handling the inetdev eventFeng Tang1-1/+11
There is a panic reported that on a system with x722 ethernet, when doing the operations like: # ip link add br0 type bridge # ip link set eno1 master br0 # systemctl restart systemd-networkd The system will panic "BUG: unable to handle kernel null pointer dereference at 0000000000000034", with call chain: i40iw_inetaddr_event notifier_call_chain blocking_notifier_call_chain notifier_call_chain __inet_del_ifa inet_rtm_deladdr rtnetlink_rcv_msg netlink_rcv_skb rtnetlink_rcv netlink_unicast netlink_sendmsg sock_sendmsg __sys_sendto It is caused by "local_ipaddr = ntohl(in->ifa_list->ifa_address)", while the in->ifa_list is NULL. So add a check for the "in->ifa_list == NULL" case, and skip the ARP operation accordingly. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-18IB/mlx5: Fix mapping of link-mode to IB width and speedAya Levin1-0/+7
Add mapping of link mode: CAUI4 100Gbps CR4/KR4 with 4 lines and 25Gbps. Fix mapping of link mode: GAUI2 50Gbps CR2/KR2 to be 2 lines with 25Gbps. Fixes: 08e8676f1607 ("IB/mlx5: Add support for 50Gbps per lane link modes") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-18IB/mlx5: Use mlx5 core to create/destroy a DEVX DCTYishai Hadas2-9/+29
To prevent a hardware memory leak when a DEVX DCT object is destroyed without calling DRAIN DCT before, (e.g. under cleanup flow), need to manage its creation and destruction via mlx5 core. In that case the DRAIN DCT command will be called and only once that it will be completed the DESTROY DCT command will be called. Otherwise, the DESTROY DCT may fail and a hardware leak may occur. As of that change the DRAIN DCT command should not be exposed any more from DEVX, it's managed internally by the driver to work as expected by the device specification. Fixes: 7efce3691d33 ("IB/mlx5: Add obj create and destroy functionality") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-18IB/mlx4: Fix race condition between catas error reset and aliasguid flowsJack Morgenstein1-1/+1
Code review revealed a race condition which could allow the catas error flow to interrupt the alias guid query post mechanism at random points. Thiis is fixed by doing cancel_delayed_work_sync() instead of cancel_delayed_work() during the alias guid mechanism destroy flow. Fixes: a0c64a17aba8 ("mlx4: Add alias_guid mechanism") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-12Merge tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds2-43/+14
Pull XArray updates from Matthew Wilcox: "This pull request changes the xa_alloc() API. I'm only aware of one subsystem that has started trying to use it, and we agree on the fixup as part of the merge. The xa_insert() error code also changed to match xa_alloc() (EEXIST to EBUSY), and I added xa_alloc_cyclic(). Beyond that, the usual bugfixes, optimisations and tweaking. I now have a git tree with all users of the radix tree and IDR converted over to the XArray that I'll be feeding to maintainers over the next few weeks" * tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix xa_reserve for 2-byte aligned entries XArray: Fix xa_erase of 2-byte aligned entries XArray: Use xa_cmpxchg to implement xa_reserve XArray: Fix xa_release in allocating arrays XArray: Mark xa_insert and xa_reserve as must_check XArray: Add cyclic allocation XArray: Redesign xa_alloc API XArray: Add support for 1s-based allocation XArray: Change xa_insert to return -EBUSY XArray: Update xa_erase family descriptions XArray tests: RCU lock prohibits GFP_KERNEL
2019-03-10Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds3-50/+36
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-23 10:38:33 +0300