summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2023-09-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-4/+0
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas) and the usual minor updates and bug fixes but no significant core changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (116 commits) scsi: storvsc: Handle additional SRB status values scsi: libsas: Delete sas_ata_task.retry_count scsi: libsas: Delete sas_ata_task.stp_affil_pol scsi: libsas: Delete sas_ata_task.set_affil_pol scsi: libsas: Delete sas_ssp_task.task_prio scsi: libsas: Delete sas_ssp_task.enable_first_burst scsi: libsas: Delete sas_ssp_task.retry_count scsi: libsas: Delete struct scsi_core scsi: libsas: Delete enum sas_phy_type scsi: libsas: Delete enum sas_class scsi: libsas: Delete sas_ha_struct.lldd_module scsi: target: Fix write perf due to unneeded throttling scsi: lpfc: Do not abuse UUID APIs and LPFC_COMPRESS_VMID_SIZE scsi: pm8001: Remove unused declarations scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock scsi: elx: sli4: Remove code duplication scsi: bfa: Replace one-element array with flexible-array member in struct fc_rscn_pl_s scsi: qla2xxx: Remove unused declarations scsi: pmcraid: Use pci_dev_id() to simplify the code scsi: pm80xx: Set RETFIS when requested by libsas ...
2023-09-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds87-1646/+2820
Pull rdma updates from Jason Gunthorpe: "Many small changes across the subystem, some highlights: - Usual driver cleanups in qedr, siw, erdma, hfi1, mlx4/5, irdma, mthca, hns, and bnxt_re - siw now works over tunnel and other netdevs with a MAC address by removing assumptions about a MAC/GID from the connection manager - "Doorbell Pacing" for bnxt_re - this is a best effort scheme to allow userspace to slow down the doorbell rings if the HW gets full - irdma egress VLAN priority, better QP/WQ sizing - rxe bug fixes in queue draining and srq resizing - Support more ethernet speed options in the core layer - DMABUF support for bnxt_re - Multi-stage MTT support for erdma to allow much bigger MR registrations - A irdma fix with a CVE that came in too late to go to -rc, missing bounds checking for 0 length MRs" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (87 commits) IB/hfi1: Reduce printing of errors during driver shut down RDMA/hfi1: Move user SDMA system memory pinning code to its own file RDMA/hfi1: Use list_for_each_entry() helper RDMA/mlx5: Fix trailing */ formatting in block comment RDMA/rxe: Fix redundant break statement in switch-case. RDMA/efa: Fix wrong resources deallocation order RDMA/siw: Call llist_reverse_order in siw_run_sq RDMA/siw: Correct wrong debug message RDMA/siw: Balance the reference of cep->kref in the error path Revert "IB/isert: Fix incorrect release of isert connection" RDMA/bnxt_re: Fix kernel doc errors RDMA/irdma: Prevent zero-length STAG registration RDMA/erdma: Implement hierarchical MTT RDMA/erdma: Refactor the storage structure of MTT entries RDMA/erdma: Renaming variable names and field names of struct erdma_mem RDMA/hns: Support hns HW stats RDMA/hns: Dump whole QP/CQ/MR resource in raw RDMA/irdma: Add missing kernel-doc in irdma_setup_umode_qp() RDMA/mlx4: Copy union directly RDMA/irdma: Drop unused kernel push code ...
2023-08-29Merge tag 'net-next-6.6' of ↵Linus Torvalds10-101/+583
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Increase size limits for to-be-sent skb frag allocations. This allows tun, tap devices and packet sockets to better cope with large writes operations - Store netdevs in an xarray, to simplify iterating over netdevs - Refactor nexthop selection for multipath routes - Improve sched class lifetime handling - Add backup nexthop ID support for bridge - Implement drop reasons support in openvswitch - Several data races annotations and fixes - Constify the sk parameter of routing functions - Prepend kernel version to netconsole message Protocols: - Implement support for TCP probing the peer being under memory pressure - Remove hard coded limitation on IPv6 specific info placement inside the socket struct - Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per socket scaling factor - Scaling-up the IPv6 expired route GC via a separated list of expiring routes - In-kernel support for the TLS alert protocol - Better support for UDP reuseport with connected sockets - Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR header size - Get rid of additional ancillary per MPTCP connection struct socket - Implement support for BPF-based MPTCP packet schedulers - Format MPTCP subtests selftests results in TAP - Several new SMC 2.1 features including unique experimental options, max connections per lgr negotiation, max links per lgr negotiation BPF: - Multi-buffer support in AF_XDP - Add multi uprobe BPF links for attaching multiple uprobes and usdt probes, which is significantly faster and saves extra fds - Implement an fd-based tc BPF attach API (TCX) and BPF link support on top of it - Add SO_REUSEPORT support for TC bpf_sk_assign - Support new instructions from cpu v4 to simplify the generated code and feature completeness, for x86, arm64, riscv64 - Support defragmenting IPv(4|6) packets in BPF - Teach verifier actual bounds of bpf_get_smp_processor_id() and fix perf+libbpf issue related to custom section handling - Introduce bpf map element count and enable it for all program types - Add a BPF hook in sys_socket() to change the protocol ID from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy - Introduce bpf_me_mcache_free_rcu() and fix OOM under stress - Add uprobe support for the bpf_get_func_ip helper - Check skb ownership against full socket - Support for up to 12 arguments in BPF trampoline - Extend link_info for kprobe_multi and perf_event links Netfilter: - Speed-up process exit by aborting ruleset validation if a fatal signal is pending - Allow NLA_POLICY_MASK to be used with BE16/BE32 types Driver API: - Page pool optimizations, to improve data locality and cache usage - Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need for raw ioctl() handling in drivers - Simplify genetlink dump operations (doit/dumpit) providing them the common information already populated in struct genl_info - Extend and use the yaml devlink specs to [re]generate the split ops - Introduce devlink selective dumps, to allow SF filtering SF based on handle and other attributes - Add yaml netlink spec for netlink-raw families, allow route, link and address related queries via the ynl tool - Remove phylink legacy mode support - Support offload LED blinking to phy - Add devlink port function attributes for IPsec New hardware / drivers: - Ethernet: - Broadcom ASP 2.0 (72165) ethernet controller - MediaTek MT7988 SoC - Texas Instruments AM654 SoC - Texas Instruments IEP driver - Atheros qca8081 phy - Marvell 88Q2110 phy - NXP TJA1120 phy - WiFi: - MediaTek mt7981 support - Can: - Kvaser SmartFusion2 PCI Express devices - Allwinner T113 controllers - Texas Instruments tcan4552/4553 chips - Bluetooth: - Intel Gale Peak - Qualcomm WCN3988 and WCN7850 - NXP AW693 and IW624 - Mediatek MT2925 Drivers: - Ethernet NICs: - nVidia/Mellanox: - mlx5: - support UDP encapsulation in packet offload mode - IPsec packet offload support in eswitch mode - improve aRFS observability by adding new set of counters - extends MACsec offload support to cover RoCE traffic - dynamic completion EQs - mlx4: - convert to use auxiliary bus instead of custom interface logic - Intel - ice: - implement switchdev bridge offload, even for LAG interfaces - implement SRIOV support for LAG interfaces - igc: - add support for multiple in-flight TX timestamps - Broadcom: - bnxt: - use the unified RX page pool buffers for XDP and non-XDP - use the NAPI skb allocation cache - OcteonTX2: - support Round Robin scheduling HTB offload - TC flower offload support for SPI field - Freescale: - add XDP_TX feature support - AMD: - ionic: add support for PCI FLR event - sfc: - basic conntrack offload - introduce eth, ipv4 and ipv6 pedit offloads - ST Microelectronics: - stmmac: maximze PTP timestamping resolution - Virtual NICs: - Microsoft vNIC: - batch ringing RX queue doorbell on receiving packets - add page pool for RX buffers - Virtio vNIC: - add per queue interrupt coalescing support - Google vNIC: - add queue-page-list mode support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add port range matching tc-flower offload - permit enslavement to netdevices with uppers - Ethernet embedded switches: - Marvell (mv88e6xxx): - convert to phylink_pcs - Renesas: - r8A779fx: add speed change support - rzn1: enables vlan support - Ethernet PHYs: - convert mv88e6xxx to phylink_pcs - WiFi: - Qualcomm Wi-Fi 7 (ath12k): - extremely High Throughput (EHT) PHY support - RealTek (rtl8xxxu): - enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU), RTL8192EU and RTL8723BU - RealTek (rtw89): - Introduce Time Averaged SAR (TAS) support - Connector: - support for event filtering" * tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits) net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler net: stmmac: clarify difference between "interface" and "phy_interface" r8152: add vendor/device ID pair for D-Link DUB-E250 devlink: move devlink_notify_register/unregister() to dev.c devlink: move small_ops definition into netlink.c devlink: move tracepoint definitions into core.c devlink: push linecard related code into separate file devlink: push rate related code into separate file devlink: push trap related code into separate file devlink: use tracepoint_enabled() helper devlink: push region related code into separate file devlink: push param related code into separate file devlink: push resource related code into separate file devlink: push dpipe related code into separate file devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper devlink: push shared buffer related code into separate file devlink: push port related code into separate file devlink: push object register/unregister notifications into separate helpers inet: fix IP_TRANSPARENT error handling ...
2023-08-28Merge tag 'v6.6-vfs.ctime' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs timestamp updates from Christian Brauner: "This adds VFS support for multi-grain timestamps and converts tmpfs, xfs, ext4, and btrfs to use them. This carries acks from all relevant filesystems. The VFS always uses coarse-grained timestamps when updating the ctime and mtime after a change. This has the benefit of allowing filesystems to optimize away a lot of metadata updates, down to around 1 per jiffy, even when a file is under heavy writes. Unfortunately, this has always been an issue when we're exporting via NFSv3, which relies on timestamps to validate caches. A lot of changes can happen in a jiffy, so timestamps aren't sufficient to help the client decide to invalidate the cache. Even with NFSv4, a lot of exported filesystems don't properly support a change attribute and are subject to the same problems with timestamp granularity. Other applications have similar issues with timestamps (e.g., backup applications). If we were to always use fine-grained timestamps, that would improve the situation, but that becomes rather expensive, as the underlying filesystem would have to log a lot more metadata updates. This introduces fine-grained timestamps that are used when they are actively queried. This uses the 31st bit of the ctime tv_nsec field to indicate that something has queried the inode for the mtime or ctime. When this flag is set, on the next mtime or ctime update, the kernel will fetch a fine-grained timestamp instead of the usual coarse-grained one. As POSIX generally mandates that when the mtime changes, the ctime must also change the kernel always stores normalized ctime values, so only the first 30 bits of the tv_nsec field are ever used. Filesytems can opt into this behavior by setting the FS_MGTIME flag in the fstype. Filesystems that don't set this flag will continue to use coarse-grained timestamps. Various preparatory changes, fixes and cleanups are included: - Fixup all relevant places where POSIX requires updating ctime together with mtime. This is a wide-range of places and all maintainers provided necessary Acks. - Add new accessors for inode->i_ctime directly and change all callers to rely on them. Plain accesses to inode->i_ctime are now gone and it is accordingly rename to inode->__i_ctime and commented as requiring accessors. - Extend generic_fillattr() to pass in a request mask mirroring in a sense the statx() uapi. This allows callers to pass in a request mask to only get a subset of attributes filled in. - Rework timestamp updates so it's possible to drop the @now parameter the update_time() inode operation and associated helpers. - Add inode_update_timestamps() and convert all filesystems to it removing a bunch of open-coding" * tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits) btrfs: convert to multigrain timestamps ext4: switch to multigrain timestamps xfs: switch to multigrain timestamps tmpfs: add support for multigrain timestamps fs: add infrastructure for multigrain timestamps fs: drop the timespec64 argument from update_time xfs: have xfs_vn_update_time gets its own timestamp fat: make fat_update_time get its own timestamp fat: remove i_version handling from fat_update_time ubifs: have ubifs_update_time use inode_update_timestamps btrfs: have it use inode_update_timestamps fs: drop the timespec64 arg from generic_update_time fs: pass the request_mask to generic_fillattr fs: remove silly warning from current_time gfs2: fix timestamp handling on quota inodes fs: rename i_ctime field to __i_ctime selinux: convert to ctime accessor functions security: convert to ctime accessor functions apparmor: convert to ctime accessor functions sunrpc: convert to ctime accessor functions ...
2023-08-24Merge branch 'mlx5-next' of ↵Jakub Kicinski6-12/+446
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Leon Romanovsky says: ==================== mlx5 MACsec RoCEv2 support From Patrisious: This series extends previously added MACsec offload support to cover RoCE traffic either. In order to achieve that, we need configure MACsec with offload between the two endpoints, like below: REMOTE_MAC=10:70:fd:43:71:c0 * ip addr add 1.1.1.1/16 dev eth2 * ip link set dev eth2 up * ip link add link eth2 macsec0 type macsec encrypt on * ip macsec offload macsec0 mac * ip macsec add macsec0 tx sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16 * ip macsec add macsec0 rx port 1 address $REMOTE_MAC * ip macsec add macsec0 rx port 1 address $REMOTE_MAC sa 0 pn 1 on key 01 ead3664f508eb06c40ac7104cdae4ce5 * ip addr add 10.1.0.1/16 dev macsec0 * ip link set dev macsec0 up And in a similar manner on the other machine, while noting the keys order would be reversed and the MAC address of the other machine. RDMA traffic is separated through relevant GID entries and in case of IP ambiguity issue - meaning we have a physical GIDs and a MACsec GIDs with the same IP/GID, we disable our physical GID in order to force the user to only use the MACsec GID. v0: https://lore.kernel.org/netdev/20230813064703.574082-1-leon@kernel.org/ * 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: RDMA/mlx5: Handles RoCE MACsec steering rules addition and deletion net/mlx5: Add RoCE MACsec steering infrastructure in core net/mlx5: Configure MACsec steering for ingress RoCEv2 traffic net/mlx5: Configure MACsec steering for egress RoCEv2 traffic IB/core: Reorder GID delete code for RoCE net/mlx5: Add MACsec priorities in RDMA namespaces RDMA/mlx5: Implement MACsec gid addition and deletion net/mlx5: Maintain fs_id xarray per MACsec device inside macsec steering net/mlx5: Remove netdevice from MACsec steering net/mlx5e: Move MACsec flow steering and statistics database from ethernet to core net/mlx5e: Rename MACsec flow steering functions/parameters to suit core naming style net/mlx5: Remove dependency of macsec flow steering on ethernet net/mlx5e: Move MACsec flow steering operations to be used as core library macsec: add functions to get macsec real netdevice and check offload ==================== Link: https://lore.kernel.org/r/20230821073833.59042-1-leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-23mlx4: Connect the infiniband part to the auxiliary busPetr Pavlu1-23/+54
Use the auxiliary bus to perform device management of the infiniband part of the mlx4 driver. Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Tested-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-23mlx4: Replace the mlx4_interface.event callback with a notifierPetr Pavlu2-14/+28
Use a notifier to implement mlx4_dispatch_event() in preparation to switch mlx4_en and mlx4_ib to be an auxiliary device. A problem is that if the mlx4_interface.event callback was replaced with something as mlx4_adrv.event then the implementation of mlx4_dispatch_event() would need to acquire a lock on a given device before executing this callback. That is necessary because otherwise there is no guarantee that the associated driver cannot get unbound when the callback is running. However, taking this lock is not possible because mlx4_dispatch_event() can be invoked from the hardirq context. Using an atomic notifier allows the driver to accurately record when it wants to receive these events and solves this problem. A handler registration is done by both mlx4_en and mlx4_ib at the end of their mlx4_interface.add callback. This matches the current situation when mlx4_add_device() would enable events for a given device immediately after this callback, by adding the device on the mlx4_priv.list. Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Tested-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-23mlx4: Use 'void *' as the event param of mlx4_dispatch_event()Petr Pavlu1-4/+10
Function mlx4_dispatch_event() takes an 'unsigned long' as its event parameter. The actual value is none (MLX4_DEV_EVENT_CATASTROPHIC_ERROR), a pointer to mlx4_eqe (MLX4_DEV_EVENT_PORT_MGMT_CHANGE), or a 32-bit integer (remaining events). In preparation to switch mlx4_en and mlx4_ib to be an auxiliary device, the mlx4_interface.event callback is replaced with a notifier and function mlx4_dispatch_event() gets updated to invoke atomic_notifier_call_chain(). This requires forwarding the input 'param' value from the former function to the latter. A problem is that the notifier call takes 'void *' as its 'param' value, compared to 'unsigned long' used by mlx4_dispatch_event(). Re-passing the value would need either punning it to 'void *' or passing down the address of the input 'param'. Both approaches create a number of unnecessary casts. Change instead the input 'param' of mlx4_dispatch_event() from 'unsigned long' to 'void *'. A mlx4_eqe pointer can be passed directly, callers using an int value are adjusted to pass its address. Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-23mlx4: Get rid of the mlx4_interface.get_dev callbackPetr Pavlu1-46/+43
Simplify the mlx4 driver interface by removing mlx4_get_protocol_dev() and the associated mlx4_interface.get_dev callbacks. This is done in preparation to use an auxiliary bus to model the mlx4 driver structure. The change is motivated by the following situation: * The mlx4_en interface is being initialized by mlx4_en_add() and mlx4_en_activate(). * The latter activate function calls mlx4_en_init_netdev() -> register_netdev() to register a new net_device. * A netdev event NETDEV_REGISTER is raised for the device. * The netdev notififier mlx4_ib_netdev_event() is called and it invokes mlx4_ib_scan_netdevs() -> mlx4_get_protocol_dev() -> mlx4_en_get_netdev() [via mlx4_interface.get_dev]. This chain creates a problem when mlx4_en gets switched to be an auxiliary driver. It contains two device calls which would both need to take a respective device lock. Avoid this situation by updating mlx4_ib_scan_netdevs() to no longer call mlx4_get_protocol_dev() but instead to utilize the information passed in net_device.parent and net_device.dev_port. This data is sufficient to determine that an updated port is one that the mlx4_ib driver should take care of and to keep mlx4_ib_dev.iboe.netdevs up to date. Following that, update mlx4_ib_get_netdev() to also not call mlx4_get_protocol_dev() and instead scan all current netdevs to find find a matching one. Note that mlx4_ib_get_netdev() is called early from ib_register_device() and cannot use data tracked in mlx4_ib_dev.iboe.netdevs which is not at that point yet set. Finally, remove function mlx4_get_protocol_dev() and the mlx4_interface.get_dev callbacks (only mlx4_en_get_netdev()) as they became unused. Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Tested-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-22IB/hfi1: Reduce printing of errors during driver shut downDouglas Miller1-3/+5
The driver prints unnecessary prints for error conditions on shutdown remove them to quiet it down. Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Link: https://lore.kernel.org/r/169271327832.1855761.3756156924805531643.stgit@awfm-02.cornelisnetworks.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-22RDMA/hfi1: Move user SDMA system memory pinning code to its own fileBrendan Cunningham6-452/+505
Move user SDMA system memory page-pinning code from user_sdma.c to pin_system.c. Put declarations for non-static functions in pinning.h. System memory pinning is necessary for processing user SDMA requests but actual steps are invisible to user SDMA request-processing code. Moving system memory pinning code for user SDMA to its own file makes this distinction apparent. These changes have no effect on userspace. Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com> Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Link: https://lore.kernel.org/r/169271327311.1855761.4736714053318724062.stgit@awfm-02.cornelisnetworks.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-22RDMA/hfi1: Use list_for_each_entry() helperJinjie Ruan1-3/+1
Convert list_for_each() to list_for_each_entry() so that the pos list_head pointer and list_entry() call are no longer needed, which can reduce a few lines of code. No functional changed. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230822033539.3692453-1-ruanjinjie@huawei.com Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-22RDMA/mlx5: Fix trailing */ formatting in block commentRohit Chavan1-1/+2
Resolved a formatting issue where the trailing */ in a block comment was placed on a same line instead of separate line. Signed-off-by: Rohit Chavan <roheetchavan@gmail.com> Link: https://lore.kernel.org/r/20230822120451.8215-1-roheetchavan@gmail.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-22RDMA/rxe: Fix redundant break statement in switch-case.Rohit Chavan1-1/+0
Removed unreachable break statement after return. Signed-off-by: Rohit Chavan <roheetchavan@gmail.com> Link: https://lore.kernel.org/r/20230822091304.7312-1-roheetchavan@gmail.com Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-22RDMA/efa: Fix wrong resources deallocation orderYonatan Nachum1-3/+3
When trying to destroy QP or CQ, we first decrease the refcount and potentially free memory regions allocated for the object and then request the device to destroy the object. If the device fails, the object isn't fully destroyed so the user/IB core can try to destroy the object again which will lead to underflow when trying to decrease an already zeroed refcount. Deallocate resources in reverse order of allocating them to safely free them. Fixes: ff6629f88c52 ("RDMA/efa: Do not delay freeing of DMA pages") Reviewed-by: Michael Margolin <mrgolin@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Yonatan Nachum <ynachum@amazon.com> Link: https://lore.kernel.org/r/20230822082725.31719-1-ynachum@amazon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-22RDMA/siw: Call llist_reverse_order in siw_run_sqGuoqing Jiang1-7/+1
We can call the function to get fifo list. Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Link: https://lore.kernel.org/r/20230821133255.31111-4-guoqing.jiang@linux.dev Acked-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-22RDMA/siw: Correct wrong debug messageGuoqing Jiang1-1/+1
We need to print num_sle first then pbl->max_buf per the condition. Also replace mem->pbl with pbl while at it. Fixes: 303ae1cdfdf7 ("rdma/siw: application interface") Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Link: https://lore.kernel.org/r/20230821133255.31111-3-guoqing.jiang@linux.dev Acked-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-22RDMA/siw: Balance the reference of cep->kref in the error pathGuoqing Jiang1-1/+0
The siw_connect can go to err in below after cep is allocated successfully: 1. If siw_cm_alloc_work returns failure. In this case socket is not assoicated with cep so siw_cep_put can't be called by siw_socket_disassoc. We need to call siw_cep_put twice since cep->kref is increased once after it was initialized. 2. If siw_cm_queue_work can't find a work, which means siw_cep_get is not called in siw_cm_queue_work, so cep->kref is increased twice by siw_cep_get and when associate socket with cep after it was initialized. So we need to call siw_cep_put three times (one in siw_socket_disassoc). 3. siw_send_mpareqrep returns error, this scenario is similar as 2. So we need to remove one siw_cep_put in the error path. Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Link: https://lore.kernel.org/r/20230821133255.31111-2-guoqing.jiang@linux.dev Acked-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-22Revert "IB/isert: Fix incorrect release of isert connection"Leon Romanovsky1-0/+2
Commit: 699826f4e30a ("IB/isert: Fix incorrect release of isert connection") is causing problems on OPA when DEVICE_REMOVAL is happening. ------------[ cut here ]------------ WARNING: CPU: 52 PID: 2117247 at drivers/infiniband/core/cq.c:359 ib_cq_pool_cleanup+0xac/0xb0 [ib_core] Modules linked in: nfsd nfs_acl target_core_user uio tcm_fc libfc scsi_transport_fc tcm_loop target_core_pscsi target_core_iblock target_core_file rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill rpcrdma rdma_ucm ib_srpt sunrpc ib_isert iscsi_target_mod target_core_mod opa_vnic ib_iser libiscsi ib_umad scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm hfi1(-) rdmavt ib_uverbs intel_rapl_msr intel_rapl_common sb_edac ib_core x86_pkg_temp_thermal intel_powerclamp coretemp i2c_i801 mxm_wmi rapl iTCO_wdt ipmi_si iTCO_vendor_support mei_me ipmi_devintf mei intel_cstate ioatdma intel_uncore i2c_smbus joydev pcspkr lpc_ich ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c sr_mod sd_mod cdrom t10_pi sg crct10dif_pclmul crc32_pclmul crc32c_intel drm_kms_helper drm_shmem_helper ahci libahci ghash_clmulni_intel igb drm libata dca i2c_algo_bit wmi fuse CPU: 52 PID: 2117247 Comm: modprobe Not tainted 6.5.0-rc1+ #1 Hardware name: Intel Corporation S2600CWR/S2600CW, BIOS SE5C610.86B.01.01.0014.121820151719 12/18/2015 RIP: 0010:ib_cq_pool_cleanup+0xac/0xb0 [ib_core] Code: ff 48 8b 43 40 48 8d 7b 40 48 83 e8 40 4c 39 e7 75 b3 49 83 c4 10 4d 39 fc 75 94 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc <0f> 0b eb a1 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f RSP: 0018:ffffc10bea13fc80 EFLAGS: 00010206 RAX: 000000000000010c RBX: ffff9bf5c7e66c00 RCX: 000000008020001d RDX: 000000008020001e RSI: fffff175221f9900 RDI: ffff9bf5c7e67640 RBP: ffff9bf5c7e67600 R08: ffff9bf5c7e64400 R09: 000000008020001d R10: 0000000040000000 R11: 0000000000000000 R12: ffff9bee4b1e8a18 R13: dead000000000122 R14: dead000000000100 R15: ffff9bee4b1e8a38 FS: 00007ff1e6d38740(0000) GS:ffff9bfd9fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005652044ecc68 CR3: 0000000889b5c005 CR4: 00000000001706e0 Call Trace: <TASK> ? __warn+0x80/0x130 ? ib_cq_pool_cleanup+0xac/0xb0 [ib_core] ? report_bug+0x195/0x1a0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? ib_cq_pool_cleanup+0xac/0xb0 [ib_core] disable_device+0x9d/0x160 [ib_core] __ib_unregister_device+0x42/0xb0 [ib_core] ib_unregister_device+0x22/0x30 [ib_core] rvt_unregister_device+0x20/0x90 [rdmavt] hfi1_unregister_ib_device+0x16/0xf0 [hfi1] remove_one+0x55/0x1a0 [hfi1] pci_device_remove+0x36/0xa0 device_release_driver_internal+0x193/0x200 driver_detach+0x44/0x90 bus_remove_driver+0x69/0xf0 pci_unregister_driver+0x2a/0xb0 hfi1_mod_cleanup+0xc/0x3c [hfi1] __do_sys_delete_module.constprop.0+0x17a/0x2f0 ? exit_to_user_mode_prepare+0xc4/0xd0 ? syscall_trace_enter.constprop.0+0x126/0x1a0 do_syscall_64+0x5c/0x90 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 ? exc_page_fault+0x65/0x150 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7ff1e643f5ab Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffec9103cc8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00005615267fdc50 RCX: 00007ff1e643f5ab RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00005615267fdcb8 RBP: 00005615267fdc50 R08: 0000000000000000 R09: 0000000000000000 R10: 00007ff1e659eac0 R11: 0000000000000206 R12: 00005615267fdcb8 R13: 0000000000000000 R14: 00005615267fdcb8 R15: 00007ffec9105ff8 </TASK> ---[ end trace 0000000000000000 ]--- And... restrack: ------------[ cut here ]------------ infiniband hfi1_0: BUG: RESTRACK detected leak of resources restrack: Kernel PD object allocated by ib_isert is not freed restrack: Kernel CQ object allocated by ib_core is not freed restrack: Kernel QP object allocated by rdma_cm is not freed restrack: ------------[ cut here ]------------ Fixes: 699826f4e30a ("IB/isert: Fix incorrect release of isert connection") Reported-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Closes: https://lore.kernel.org/all/921cd1d9-2879-f455-1f50-0053fe6a6655@cornelisnetworks.com Link: https://lore.kernel.org/r/a27982d3235005c58f6d321f3fad5eb6e1beaf9e.1692604607.git.leonro@nvidia.com Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-21RDMA/bnxt_re: Fix kernel doc errorsLeon Romanovsky1-15/+15
Fix set of the following errors due to use of wrong kernel doc format to describe function parameters: drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:68: warning: Function parameter or member 'rcfw' not described in '__wait_for_resp' Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308180600.oOnkIAQV-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202308180401.iaj2ktTc-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202308180214.Lt9NAhbM-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202308180055.6zM4AK6V-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202308172136.ipx1wvs6-lkp@intel.com/ Link: https://lore.kernel.org/r/4b22c385f1b68590ace8f82f2985d14b20999432.1692539554.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20RDMA/mlx5: Handles RoCE MACsec steering rules addition and deletionPatrisious Haddad4-16/+243
Add RoCE MACsec rules when a gid is added for the MACsec netdevice and handle their cleanup when the gid is removed or the MACsec SA is deleted. Also support alias IP for the MACsec device, as long as we don't have more ips than what the gid table can hold. In addition handle the case where a gid is added but there are still no SAs added for the MACsec device, so the rules are added later on when the SAs are added. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20IB/core: Reorder GID delete code for RoCEPatrisious Haddad1-3/+3
Reorder GID delete code so that the driver del_gid operation is executed before nullifying the gid attribute ndev parameter, this allows drivers to access the ndev during their gid delete operation, which makes more sense since they had access to it during the gid addition operation. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20RDMA/mlx5: Implement MACsec gid addition and deletionPatrisious Haddad5-9/+216
Handle MACsec IP ambiguity issue, since mlx5 hw can't support programming both the MACsec and the physical gid when they have the same IP address, because it wouldn't know to whom to steer the traffic. Hence in such case we delete the physical gid from the hw gid table, which would then cause all traffic sent over it to fail, and we'll only be able to send traffic over the MACsec gid. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-19RDMA/irdma: Prevent zero-length STAG registrationChristopher Bednarz3-2/+16
Currently irdma allows zero-length STAGs to be programmed in HW during the kernel mode fast register flow. Zero-length MR or STAG registration disable HW memory length checks. Improve gaps in bounds checking in irdma by preventing zero-length STAG or MR registrations except if the IB_PD_UNSAFE_GLOBAL_RKEY is set. This addresses the disclosure CVE-2023-25775. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Signed-off-by: Christopher Bednarz <christopher.n.bednarz@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20230818144838.1758-1-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-19RDMA/erdma: Implement hierarchical MTTCheng Xu3-24/+194
Hierarchical MTT allows large MR registration without the need of continuous physical address. This commit adds the support of hierarchical MTT support for erdma. Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com> Link: https://lore.kernel.org/r/20230817102151.75964-4-chengyou@linux.alibaba.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-19RDMA/erdma: Refactor the storage structure of MTT entriesCheng Xu4-94/+152
Currently our MTT only support inline mtt entries (0 level MTT) and indirect MTT entries (1 level mtt), which will limit the maximum length of MRs. In order to implement a multi-level MTT, we refactor the structure of MTT first. Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com> Link: https://lore.kernel.org/r/20230817102151.75964-3-chengyou@linux.alibaba.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-19RDMA/erdma: Renaming variable names and field names of struct erdma_memCheng Xu2-37/+37
Currently, variable names and field names of struct erdma_mem contain 'mtt', which is not accurate. Renaming them with 'xxx_mem' or 'mem'. Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com> Link: https://lore.kernel.org/r/20230817102151.75964-2-chengyou@linux.alibaba.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-19RDMA/hns: Support hns HW statsChengchang Tang4-0/+159
Support query hns HW stats for rdma-tool to help debugging. Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://lore.kernel.org/r/20230816091812.2899366-3-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-19RDMA/hns: Dump whole QP/CQ/MR resource in rawChengchang Tang1-72/+3
Currently, some fields in the QP/CQ/MR resource can be dumped by rdma-tool, but this information is not enough. It is very inconvenient to continue to expand on the current field, and it will also introduce some trouble to parse these raw data. This patch dump whole resource in raw to avoid the above problems. Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://lore.kernel.org/r/20230816091812.2899366-2-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-2/+7
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/sfc/tc.c fa165e194997 ("sfc: don't unregister flow_indr if it was never registered") 3bf969e88ada ("sfc: add MAE table machinery for conntrack table") https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-18RDMA/irdma: Add missing kernel-doc in irdma_setup_umode_qp()Leon Romanovsky1-0/+1
Fix the following warning reported by kbuild: drivers/infiniband/hw/irdma/verbs.c:584: warning: Function parameter or member 'udata' not described in 'irdma_setup_umode_qp' Fixes: 3a8498720450 ("RDMA/irdma: Allow accurate reporting on QP max send/recv WR") Link: https://lore.kernel.org/r/2c9bcd2b773c400a1699bd7973e22bfba1e4b379.1692260011.git.leonro@nvidia.com Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308171620.m4MNACWz-lkp@intel.com/ Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-08-16RDMA/mlx4: Copy union directlyGustavo A. R. Silva1-2/+1
Copy union directly instead of using memcpy(). Note that in this case, a direct assignment is more readable and consistent with the subsequent assignments. This addresses the following -Wstringop-overflow warning seen in s390 with defconfig: drivers/infiniband/hw/mlx4/main.c:296:33: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=] 296 | memcpy(&port_gid_table->gids[free].gid, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 297 | &attr->gid, sizeof(attr->gid)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This helps with the ongoing efforts to globally enable -Wstringop-overflow. Link: https://github.com/KSPP/linux/issues/308 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/ZNvimeRAPkJ24zRG@work Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-16RDMA/irdma: Drop unused kernel push codeShiraz Saleem4-119/+19
The driver has code blocks for kernel push WQEs but does not map the doorbell page rendering this mode non functional [1] Remove code associated with this feature from the kernel fast path as there is currently no plan of record to support this. This also address a sparse issue reported by lkp. drivers/infiniband/hw/irdma/uk.c:285:24: sparse: sparse: incorrect type in assignment (different base types) @@ expected bool [usertype] push_wqe:1 @@ got restricted __le32 [usertype] *push_db @@ drivers/infiniband/hw/irdma/uk.c:285:24: sparse: expected bool [usertype] push_wqe:1 drivers/infiniband/hw/irdma/uk.c:285:24: sparse: got restricted __le32 [usertype] *push_db drivers/infiniband/hw/irdma/uk.c:386:24: sparse: sparse: incorrect type in assignment (different base types) @@ expected bool [usertype] push_wqe:1 @@ got restricted __le32 [usertype] *push_db @@ [1] https://lore.kernel.org/linux-rdma/20230815051809.GB22185@unreal/T/#t Fixes: 272bba19d631 ("RDMA: Remove unnecessary ternary operators") Fixes: 551c46edc769 ("RDMA/irdma: Add user/kernel shared libraries") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308110251.BV6BcwUR-lkp@intel.com/ Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20230816001209.1721-1-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-15RDMA/bnxt_re: Add support for dmabuf pinned memory regionsSaravanan Vajravel3-26/+62
Support the new verb which indicates dmabuf support. bnxt doesn't support ODP. So use the pinned version of the dmabuf APIs to enable bnxt_re devices to work as dmabuf importer. Link: https://lore.kernel.org/r/1690790473-25850-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-08-15RDMA/bnxt_re: Protect the PD table bitmapSelvin Xavier3-8/+24
Syncrhonization is required to avoid simultaneous allocation of the PD. Add a new mutex lock to handle allocation from the PD table. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1692032419-21680-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-15RDMA/bnxt_re: Initialize mutex dbq_lockKashyap Desai1-0/+1
Fix the missing dbq_lock mutex initialization Fixes: 2ad4e6303a6d ("RDMA/bnxt_re: Implement doorbell pacing algorithm") Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1692032419-21680-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-13IB/core: Add more speed parsing in ib_get_width_and_speed()Kalesh AP1-1/+10
When the Ethernet driver does not provide the number of lanes in the __ethtool_get_link_ksettings() response, the function ib_get_width_and_speed() does not take consideration of 50G, 100G and 200G speeds while calculating the IB width and speed. Update the width and speed for the above netdev speeds. Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1690966823-8159-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-13RDMA/cxgb4: Set sq_sig_type correctlyGuoqing Jiang1-1/+1
Replace '0' with IB_SIGNAL_REQ_WR given the sq_sig_type is either IB_SIGNAL_ALL_WR or IB_SIGNAL_REQ_WR per the below. enum ib_sig_type { IB_SIGNAL_ALL_WR, IB_SIGNAL_REQ_WR }; Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Link: https://lore.kernel.org/r/20230731092106.10396-1-guoqing.jiang@linux.dev Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-10RDMA/bnxt_re: Initialize dpi_tbl_lock mutexKashyap Desai1-0/+1
Fix the missing dpi_tbl_lock mutex initialization. Fixes: 0ac20faf5d83 ("RDMA/bnxt_re: Reorg the bar mapping") Link: https://lore.kernel.org/r/1691642677-21369-4-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-08-10RDMA/bnxt_re: Fix error handling in probe failure pathKalesh AP1-0/+2
During bnxt_re_dev_init(), when bnxt_re_setup_chip_ctx() fails unregister with L2 first before bailing out probe. Fixes: ae8637e13185 ("RDMA/bnxt_re: Add chip context to identify 57500 series") Link: https://lore.kernel.org/r/1691642677-21369-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-08-10RDMA/bnxt_re: Properly order ib_device_unalloc() to avoid UAFSelvin Xavier1-1/+1
ib_dealloc_device() should be called only after device cleanup. Fix the dealloc sequence. Fixes: 6d758147c7b8 ("RDMA/bnxt_re: Use auxiliary driver interface") Link: https://lore.kernel.org/r/1691642677-21369-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-08-08RDMA/hns: Remove unused declaration hns_roce_modify_srq()Yue Haibing1-3/+0
Commit c7bcb13442e1 ("RDMA/hns: Add SRQ support for hip08 kernel mode") declared but never implemented this. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20230804130418.41728-1-yuehaibing@huawei.com Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-08RDMA: Make all 'class' structures constIvan Orlov7-83/+79
Now that the driver core allows for struct class to be in read-only memory, making all 'class' structures to be declared at build time placing them into read-only memory, instead of having to be dynamically allocated at load time. Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Leon Romanovsky <leon@kernel.org> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Cc: "Md. Haris Iqbal" <haris.iqbal@ionos.com> Cc: Jack Wang <jinpu.wang@ionos.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yishai Hadas <yishaih@nvidia.com> Cc: Ivan Orlov <ivan.orlov0322@gmail.com> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/2023080427-commuting-crewless-cbee@gregkh Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-07net/mlx5: Allocate completion EQs dynamicallyMaher Sanalla2-2/+2
This commit enables the dynamic allocation of EQs at runtime, allowing for more flexibility in managing completion EQs and reducing the memory overhead of driver load. Whenever a CQ is created for a given vector index, the driver will lookup to see if there is an already mapped completion EQ for that vector, if so, utilize it. Otherwise, allocate a new EQ on demand and then utilize it for the CQ completion events. Add a protection lock to the EQ table to protect from concurrent EQ creation attempts. While at it, replace mlx5_vector2irqn()/mlx5_vector2eqn() with mlx5_comp_eqn_get() and mlx5_comp_irqn_get() which will allocate an EQ on demand if no EQ is found for the given vector. Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-08-07net/mlx5: Rename mlx5_comp_vectors_count() to mlx5_comp_vectors_max()Maher Sanalla1-1/+1
To accurately represent its purpose, rename the function that retrieves the value of maximum vectors from mlx5_comp_vectors_count() to mlx5_comp_vectors_max(). Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-08-07RDMA: Remove unnecessary NULL valuesRuan Jinjie2-3/+3
The NULL initialization of the pointers assigned by kzalloc() first is not necessary, because if the kzalloc() failed, the pointers will be assigned NULL, otherwise it works as usual. so remove it. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230804082102.3361961-1-ruanjinjie@huawei.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-07IB/uverbs: Fix an potential error pointer dereferenceXiang Yang1-0/+2
smatch reports the warning below: drivers/infiniband/core/uverbs_std_types_counters.c:110 ib_uverbs_handler_UVERBS_METHOD_COUNTERS_READ() error: 'uattr' dereferencing possible ERR_PTR() The return value of uattr maybe ERR_PTR(-ENOENT), fix this by checking the value of uattr before using it. Fixes: ebb6796bd397 ("IB/uverbs: Add read counters support") Signed-off-by: Xiang Yang <xiangyang3@huawei.com> Link: https://lore.kernel.org/r/20230804022525.1916766-1-xiangyang3@huawei.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-07RDMA/hns: Fix CQ and QP cache affinityChengchang Tang2-6/+23
Currently, the affinity between QP cache and CQ cache is not considered when assigning QPN, it will affect the message rate of HW. Allocate QPN from QP cache with better CQ affinity to get better performance. Fixes: 71586dd20010 ("RDMA/hns: Create QP with selected QPN for bank load balance") Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://lore.kernel.org/r/20230804012711.808069-5-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-07RDMA/hns: Fix inaccurate error label name in init instanceJunxian Huang1-4/+4
This patch fixes inaccurate error label name in init instance. Fixes: 70f92521584f ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT") Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://lore.kernel.org/r/20230804012711.808069-4-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-07RDMA/hns: Fix incorrect post-send with direct wqe of wr-listJunxian Huang1-1/+2
Currently, direct wqe is not supported for wr-list. RoCE driver excludes direct wqe for wr-list by judging whether the number of wr is 1. For a wr-list where the second wr is a length-error atomic wr, the post-send driver handles the first wr and adds 1 to the wr number counter firstly. While handling the second wr, the driver finds out a length error and terminates the wr handle process, remaining the counter at 1. This causes the driver mistakenly judges there is only 1 wr and thus enters the direct wqe process, carrying the current length-error atomic wqe. This patch fixes the error by adding a judgement whether the current wr is a bad wr. If so, use the normal doorbell process but not direct wqe despite the wr number is 1. Fixes: 01584a5edcc4 ("RDMA/hns: Add support of direct wqe") Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://lore.kernel.org/r/20230804012711.808069-3-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-31 22:39:48 +0300